Search results: on3

Sort order

Counting matching models…

P
PrintablesNozzle

Cableclip Kabelclip z. B. Festool 10mm Kabel mit Fusion360 Modell

I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
62
Rating
5
P
PrintablesMetikumi

Snap-in Air Vent 30mm (with Parametric Fusion360)

There is a new and improved version of this model: LR2305 This is an air vent for a 30mm hole in an enclosure with 10mm thick walls. It has a snap-in mechanism to hold it in place with no additional tools required. Use the attached…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
77
Likes
13
Rating
5
P
PrintablesNozzle

Cableclip Kabelclip z. B. USB 4mm Kabel mit Fusion360 Modell

Printed it on my MK3S+. I use PETG for it and 30% infill. Remix because it is for 4mm cable and not for 10mm cable.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
5
Rating
0
P
PrintablesMetikumi

Sample Box with Lid with Fully Parametric Fusion360 Design

Introducing a versatile and customizable 3D printable storage box I designed specifically for filament samples. This sturdy box can also be used to store a variety of small items, making it an excellent addition to your 3D printing…

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
6
Rating
0
P
PrintablesNozzle

Cableclip Kabelclip z. B. 6mm Stromkabel mit Fusion360 Modell

Printed it on my MK3S+. I use PETG for it and 30% infill.

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
3
Rating
5
P
PrintablesStueyNSFW
18+

The source marked this model as adult content.

Downloads
5,094
Likes
307
Rating
3
P
PrintablesJosef Adamcik

MTG Commander Deck Box (with parametrized Fusion360 file)

MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…

Downloads
4,824
Likes
336
Rating
4.59
P
PrintablesElsa

Bathroom Arranger (Toothbrush Holder, Version3)

This is the small variation of the holder. Designed for small items. Print instructions Prusa i3MK3s 0.2 20% Infill Printed on the side without supports.

Downloads
2,254
Likes
337
Rating
4.81
P
PrintablesPicoNano

Snap-fit Parametric Enclosure Fusion360

This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…

Downloads
2,122
Likes
90
Rating
5
P
Printablesstew675

Beacon3D mount for Qidi Plus4

A design for mounting a Beacon3D H Normal probe onto the tool-head of the Qidi Plus4 Update: 10th April 2025 I have uploaded an M3 screw variant of the mount for later model versions of the Plus 3 that use M3 bolts instead of 2.5mm…

Downloads
1,641
Likes
188
Rating
4.89

PCO-28 (German PET Coke Bottle) Thread profile for Fusion360 - Gewinde für PET Mehrweg Cola Flaschen

Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…

Downloads
1,462
Likes
52
Rating
5
P

Road Traffic Safety Cone for RC Toy Cars / Sphero - Fusion360 Parametrical

I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…

Downloads
1,318
Likes
358
Rating
4.92
P
PrintablesAdam L

Foot Fidget Rollers : Play with (or massage) your feet! [Customizable Fusion360]

Sometimes part of your body other than just your hands need to fidget (or be massaged). These two simple and functional designs hopefully help stimulate your feet and mind during those longer work days. Provided in 3MF and Fusion360 files…

Downloads
1,220
Likes
164
Rating
4.86
P
PrintablesMarcusInCo

Gridfinity Parametric Divider Bin Fusion360 File

Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…

Downloads
1,040
Likes
111
Rating
5
P
PrintablesRi3del

egg cup (+ Fusion360 file)

Take the fusion file and make your own design! :-)

Downloads
928
Likes
111
Rating
4.64
P
PrintablesPrint2Win

MicroSwiss Ender 5 DirectDrive+AllMetalHotend Assembly (Step and Fusion360)

This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…

Downloads
866
Likes
49
Rating
5
P
PrintablesthoperSought

customizable, solid (filled-in/blank) Gridfinity boxes/bins for custom organizers (Fusion360/STEP)

overview this is a completely from-scratch model of Zack Freedman's Gridfinity bins for creating custom organizers to tidy up your desk drawers/tool cabinets, etc. it's intended to be: efficient (minimum number of operations on the…

Downloads
830
Likes
48
Rating
5
P
Printablesmosselini1

Single Extruder/Multi Part Rose (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. In addition to the main model in 3 parts, I added a version of the flower with a flat base and without hole would you…

Downloads
818
Likes
107
Rating
4.91
P
PrintablesTheProjectWheel

HSW Insert - Fusion360 Model (Honeycomb Storage Wall)

Please comment, rate, and post a make! I needed a copy of the full insert but needed to be able to adjust the depth. So, I used the model provided by mosselini1 to recreate all the sketches. Be sure to check out my other models!

Downloads
811
Likes
61
Rating
5
P
PrintablesLayerCake

Gridfinity Parametric Container Fusion360

A basic Gridfinity parametric container done in Fusion 360. Slightly modified from the original design for better printability with a 0.4 mm nozzle size and a layer height of 0.2 mm. Update Some preconfigured models were added in height…

Downloads
722
Likes
79
Rating
5
P
PrintablesBarto

Pegboard / Multiboard Click Hook - Parametric (Fusion360) - create any size you need!

Parametric Pegboard / Multiboard click hook. Customizable by changing Parameters in Fusion 360 - the free version is sufficient. Open attached f3d file in Fusion Click Modify - Change parameters Couple of examples attached (more than…

Downloads
716
Likes
58
Rating
4.71
P
PrintablesDežo

Notebook stand (with Fusion360 sources)

Simple arc style notebook stand. You can easily change width and length of the stand. Default size is 22mm width and 170mm length for my Dell XPS 13. Works fine even for my Macbook Pro 15 (late 2013). Print instructions For the top part…

Downloads
707
Likes
72
Rating
5
P
PrintablesAlex

Luggage Tag Fusion360

Luggage Tage: just change the information with Fusion 360 or add your information in the slicer. Most of the slicer have the feature to add letters. Therefor just use the STL file without the Informations. Please print in 120-150% the pin…

Downloads
699
Likes
67
Rating
4.8
P
Printablesdfrommi

Gridfinity Drawer Baseplate Generator (Fusion360)

This fusion-design helps with the creation of perfect-fit baseplates with square corners. Given drawer dimensions, a baseplate is created with the maximum amount of Gridfinity-units, surrounded by a spacer. The baseplate is centered…

Downloads
694
Likes
64
Rating
5
P
Printablesmosselini1

Single Extruder - Dual Color - Salamanders (fusion360)

The fusion360 file are given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. I also joined a decimated version of the base model in the files, it contains…

Downloads
687
Likes
256
Rating
5

[Fusion360] Scalable parametric Hinge

This is a Scalable Hinge designed in Fusion360, i'm new to 3D Modeling and printing, i needed a hinge for one of my designs and lost a lot of time redrawing the Hinge to fit my needs. so i designed this simple scalable hinge, it took me…

Downloads
683
Likes
36
Rating
5
P
Printablesshawly

Roomba ramp - Ramp for vacuum robots (30mm incl. Fusion360 file)

I converted the Roomba ramp from drdentz for Fusion360 and extended it by 10mm in height for my Bedroom. I also added the F360 file for anyone that wants to modify it. Notes: Printed in 2:33h with a 0.6mm nozzle and a layer height of…

Downloads
672
Likes
24
Rating
5
P
Printablesmosselini1

Single Extruder/Multi Part FNAF Freddy (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Additional parts exist there as well (eye pupils and whiskers), these are left out since they are, at default size, to…

Downloads
658
Likes
82
Rating
0
P
Printablesscubam@xx

608 Bearing (Parametric Fusion360 File, print in place)

I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…

Downloads
651
Likes
71
Rating
5
P
PrintablesFliegenfisch

Stackable Box Version3

I redesigned this box. It fits the Thingiverse stackable boxes, giving you a wide range of boxes to choose from.

Downloads
634
Likes
76
Rating
5
P
Printablesvinzcenzo

IKEA SKADIS - Parametric Hook (incl. Fusion360 file)

I created a parametric model of the IKEA SKADIS Hook from Alessio 's IKEA SKADIS Collection using Fusion360, starting from scratch. This allows for easy adaptation to various custom sizes of hooks. The STL model provided is a variant with…

Downloads
628
Likes
39
Rating
5
P
Printablesgeokscott

Parametric Box with Snap on Lid (Fusion360) - Version 2

Remember to LIKE so I get credit, thanks! NEW Version 2. Parametric Box. You can adjust the dimensions as needed. If you don't have Fusion 360, let me know what you want and I'll create the model for you. I found some bugs and corrected.…

Downloads
613
Likes
41
Rating
5
P
Printablesmosselini1

Single Extruder - Dual Color - Octopus (fusion360)

The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. The model tries to depict a Blue-ringed octopus, the most commonly known toxic…

Downloads
547
Likes
187
Rating
4.5
P
PrintablesBridgeNewb

Beeline Moto 2 Clip (Velo 2 as well). F3D(Fusion360) file included.

A basic clip for a Beeline Moto 2, which (supposedly) fits Velo 2 as well. Modify as reqired, F3D included… I didnt spend a gross amount of time doing it and it was done to best print on my printer which isnt tuned in the best. But i have…

Downloads
533
Likes
39
Rating
5
P
Printablesmosselini1

Flat Base Flower (fusion360)

A fusion360 file is available but only for my changes since it is based of the stl of the base model. It can be useful for further remixes however. Printing Information: Use regular supports to properly support the petals Note that the…

Downloads
500
Likes
17
Rating
0
P
Printablesandrepadua

Removable Labels for Gridfinity AddOn for Fusion360

This model is a simple removable label for x1 Gridfinity Bins generated by Le0Michine's wonderful Fusion360 plugin. If you don't know it, check it out here - you won't regret it. If all you need are compatible bins, now i've published…

Downloads
482
Likes
113
Rating
5
P
PrintablesSleepyhead

Parametric S Hook. Freecad. Fusion360. OnShape.

There are loads of S Hooks and this remix is the one that was for a specific job for myself. This is a freecad Parametric version that you can change Thickness, Width, and circle sizes. Just use the spreedsheet. Freecad is obviously…

Downloads
479
Likes
30
Rating
5
P
PrintablesNozzle

Table saw Blade Alignment Dial gauge holder Fusion360 Model

Einstellhilfe für Tischkreissäge wie z.B. Metabo TS254 oder Bosch GTS 10 XC Die Grundplatte mit der Messuhr läuft mit einem Gleitstein in der Nut des Tisches. Damit kann das Sägeblatt parallel zur Nut oder der Schiebeschlitten parallel…

Downloads
477
Likes
62
Rating
4.67
P
Printablesmosselini1

Animals Drawing Templates (fusion360)

The animal drawings come from yganko on vecteezy ( https://es.vecteezy.com/arte-vectorial/3193765-vector-conjunto-de-animales-silueta ). The additional animal drawings come from marbledesign on vecteezy (assortiment of images) Printing…

Downloads
473
Likes
94
Rating
5
P
Printablesaqf23

Dumpling Maker / Press (w/ Fusion360 link)

This is a simple but rigid dumpling maker (or press) that I did for the dumpling wrappers that we are using at home (~12cm diameter). I tried a lot of versions in thingiverse but they were difficult to be printed or too weak and break…

Downloads
449
Likes
46
Rating
4.75
P
Printablesmosselini1

Lucet Fork (fusion360)

The dimensions and overall shape of the lucet fork are based upon the guidance of this video (starting at 0:55): To learn how to use a lucet fork you can look into this video (starting at 0:45): Printing information: Supports can improve…

Downloads
449
Likes
184
Rating
5
P
PrintablesAsa

Cable Management Pack - Fusion360 Files Included (zip tie anchor, cable clip, etc)

Use #17 or #18 sizes nails for the cable arches Use #4 screws for the cable clamp and large cable clip For the ziptie anchor I recommend double sided adhesive foam (affiliate link): https://amzn.to/3w16Kq6 You may need to use a glue stick…

Downloads
436
Likes
167
Rating
5
P
PrintablesRi3del

Anycubic Chiron original X-Carriage (3D model, STEP, Fusion360)

Für mich war wichtig, dass die Düse des V6 Hotends genau da endet, wo beim Original die Düse des V5 Hotends sitzt. Diese Zeichnung ist nun die Voraussetzung um eine Halterung für ein E3D-V6 oder auch Dragon Hotend zu zeichnen. Außerdem…

Downloads
434
Likes
29
Rating
5
P
Printablesmosselini1

Multi Part Campfire (fusion360)

The fusion file is provided would you want to adjust the tolerances or to see how it's done. I added an intermediary step of the process just after making the base model printable to ease future potential remixes. Printing Information:…

Downloads
394
Likes
22
Rating
5
P
Printablesmosselini1

Cat Alphabet Drawing Template (fusion360)

The cat alphabet was found on the internet, the earliest mention that I could find in a reasonable time was here (but it is older than that I think): https://in.pinterest.com/pin/740842207458303239/ [27/06/21] Printing Information: Be…

Downloads
394
Likes
240
Rating
4.83
P
Printablesmarkwal

G-Clamp editable in Fusion360

I wanted a G-clamp to use to mount a power strip onto my workbench. I needed a different size though, so I redrew johann517's G-Clamp fully printable in Fusion 360. To edit it in Fusion 360, download the f3d files and upload them into…

Downloads
386
Likes
34
Rating
1
P

MK4 PG Case Fusion360 & STEP files

Prusa has another piece on the printer to showcase designs, I'm sharing the CAD so you can customize it yourself.

Downloads
384
Likes
120
Rating
4.2
P
Printablesmosselini1

Prusa Balancing Game - Modular Base (fusion360)

The connector was made as a separate piece to improve the print quality of the joining area. Print the connector on its side, the base flat and the spike with the connector hole on the bottom. You can always glue the connector to one of…

Downloads
362
Likes
37
Rating
5
P
Printablesdavasto

Parametric Remote Control Holder (with Fusion360-File)

I wanted an easy-slide-in and easy-slide-out storage solution for my remote controls. So I decided to hang them under the table with some Tape (like Tesa Powerstrips or something like that). Therefor I indented the top. You can easily…

Downloads
344
Likes
57
Rating
5
P
PrintablesPrint2Win

MicroSwiss Ender 5 Plus Direct Drive Plate Remix (Step and Fusion360)

This is a remix from an stl file of the MicroSwiss Ender 5 DirectDrive backplate uploaded to thingiverse. . . I made this so everybody can make their own fan ducts for their setup (although I have designed one for three 40mm axial fans:…

Downloads
336
Likes
19
Rating
5
P
Printablesmosselini1

Multi Part 3D BENCHY (fusion360)

I made this model essentially as challenge to learn on how to manually cut models in blender. I didn't realise that 3D BENCHY was originally designed into pieces then merged by Prusa. It would certainly have been easier would it have been…

Downloads
335
Likes
37
Rating
5
P
PrintablesPrint2Win

MicroSwiss DirectDrive+AllMetalHotend Assembly (Step and Fusion360)

This is an exact model (+- 0.1mm tolerance) of the MicroSwiss DirectDrive and AllMetalHotend for Creality CR10/Ender3 printers and was achieved only by manual measuring. It's available as a step file or as a Fusion360 file (.f3z). I made…

Downloads
324
Likes
26
Rating
5
P
PrintablesTANOYCIA 3D

Funda Samsung Galaxy A06 - 5G + Archivo Fusion360 - TANO3D

Funda para Samsung Galaxy A06 5G, mas archivo en Fusion 360 para seguir modificandola y mejorandola a gusto.... Y GRATIS

Downloads
313
Likes
9
Rating
0
P
PrintablesKisssys

Parametric Project Case in Fusion360

The Stl files are for a 2x3x1 box but the Fusion360 design is linked and is Parametric so it's easy to make the size you need. Look at the video starting about 10:10 to see how easy it can be made to the size you need with Fusion. Uses…

Downloads
311
Likes
19
Rating
0
P
PrintablesChris Schmuck

HOn30 shorty combine and coach

Sort like the Sierra RR cars, but even smaller! The 3D long couplers are for ultra sharp curves, you can use regular 1015 couplers if you like. Category: Hobby

Downloads
305
Likes
28
Rating
0
P
PrintablesRich Brungard

HOn30 Kato 11-109 Chassis cover

Cover snaps over a Kato N scale 11-109 tram chassis to allow for HOn30 or On18 critters to be built.

Downloads
305
Likes
18
Rating
5
P
PrintablesChris Weiss

Snap-fit Parametric Enclosure Fusion360 - Fixed

This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…

Downloads
305
Likes
9
Rating
0
P
Printablesmosselini1

Bell (fusion360)

Being plastic this bell doesn't make the satisfying metal sound when used, however you can always put some metal strips on the inside and replace the stem to have a more realistic bell. Printing information: There are 2 parts to print:…

Downloads
287
Likes
8
Rating
0
P
PrintablesMetikumi

Painter's Tetrahedron: Multi-Size, Optimized, Painters Pyramid Design with Fusion360 File

If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…

Downloads
283
Likes
23
Rating
5
P
PrintablesChris Schmuck

HOn30 bridge

A HOn30 bridge based on the Buchanon bridge along the Waynesburg & Washington

Downloads
280
Likes
33
Rating
0
P
Printablesmosselini1

Multi Part "AJ the Frog" (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model into its parts and print them all separately. No supports are needed (for the…

Downloads
275
Likes
30
Rating
4.75
P
Printablesmosselini1

Special Days Drawing Templates (fusion360)

The halloween drawings come from amy1313 , gfx_expert_team , goff.brian , marbledesign , studiogstoc and iamglshn on vecteezy. The birthday drawings come from hati.royani , inij , marcolivolsi04 , iuss384547 , ismail terrab ,…

Downloads
272
Likes
93
Rating
4.67
P
Printablesmosselini1

Garden Hose Hanger (fusion360)

When storing your garden hose, often the end floats about or lies on the ground resulting in a water puddle when the water comes out of it. A good way to solve this issue is to hang your hose upright, but it can be a struggle to hold it…

Downloads
267
Likes
128
Rating
5
P
Printablesmosselini1

The legend of Zelda - Triforce - Gyro Pendant (fusion360)

A nice little pendant that can serve many purposes: necklace, keychain, decoration, … . Show your love for science and Zelda with this gadget that will certainly start conversations. Would you like to remix this model to for example…

Downloads
265
Likes
66
Rating
5
P
PrintablesJG

Xiaomi 14T Pro Case and Phone (2407FPN8EG) (Fusion360)

Xiaomi 14T Pro Case and Phone (2407FPN8EG) (Fusion360)

Downloads
264
Likes
11
Rating
5
P
Printablesmosselini1

Garden Hose to PET Bottle Connector (fusion360)

Certain tasks may require special hose heads and this model aims to ease the creation process in case you don't simply want to buy a new one for, for example, only one usecase. This connector is made to allow you to make your own DIY…

Downloads
257
Likes
60
Rating
5
P
Printablesojaly

Splattershot(Splatoon3)

Splattershot in Splatoon 3. It is a one-piece model and cannot be disassembled into parts. Also note that the rear cap joint is a bit thin.

Downloads
257
Likes
24
Rating
0
P
PrintablesChris Schmuck

MDC 2-6-0 HOn30

MDC/Athearn 2-6-0 HOn30. I used Kato Bigboy tender trucks.

Downloads
252
Likes
23
Rating
0
P
PrintablesCondorman

SV08 + Beacon3D Rev H mount

Updates Aug.13.2024: Fully working on stock hardware and even stock firmware! You'll need to hide some .py files to make the [probe] cfg errors go away. I followed this discord user's instructions successfully.…

Downloads
252
Likes
36
Rating
5
P
Printablesmosselini1

Single Extruder - Dual Color - Stingray (fusion360)

The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. Printing info: Scaling down can be tricky since the tolerances will scale…

Downloads
251
Likes
71
Rating
0
P
PrintablesChris Schmuck

HOn30 18' boxcar.

This is a HOn30 18' boxcar that might or might not look like the Bachperson On30 model. I used Tichy grab irons, stirrups, and brake wheel. 1015 Microtrains couplers and Microtrains axle length (.540") 36" metal wheels form Eastern…

Downloads
247
Likes
24
Rating
5
P
PrintablesChris Schmuck

HOn30 Forney KC #1

This is a HOn30 slightly shortened Kennebec Central Forney #1 made to fit a Toma Model Works Kiso loco chassis. The real locomotive was converted to burn coal with an extended smokebox. To print tip the body up at 23 degrees. After…

Downloads
247
Likes
23
Rating
0
P
Printablesandrej

AAA (&AA) Battery Box, incl. Fusion360 and Step files

After printing Duncan's AA Battery Box , I wanted a AAA Battery Box with the same external dimensions. Box holds 40 AAA Batteries. Included Fusion360 (.f3d) and .step files in addition to the STLs in case someone wants to create other…

Downloads
246
Likes
25
Rating
5
P
PrintablesGP

Heavy Duty Corner Brace 100mm, Lack Compatible + STEP & Fusion360

100mm corner brace Printing advice Use more perimeters (I'd recommend 3 or 4) and triangle infill (it's the least flexible from simple and fast to print infills) The holes are 3mm, use 3 or 2.5mm screws.

Downloads
246
Likes
46
Rating
5
P
PrintablesChris Schmuck

Shorty HOn30 Climax for Kato 4 wheel chassis

This is a shorty Climax locomotive I made to fit on a Kato 4 wheel chassis. Category: Toys & Games

Downloads
243
Likes
27
Rating
0
P
PrintablesPhaedrux

Bagel Slicer with Fusion360 files

Cut your bagel perfectly every time. 4 versions to choose from. I recommend version 3 or 4. Version 1 uses a lot of plastic and is quite large. Version 2 is a bit better. Version 3 is smaller and uses less plastic. Version 4 is optimized…

Downloads
240
Likes
20
Rating
5
P
PrintablesChris Schmuck

Eureka Mill Ore Car HOn30

Eureka Mill Ore Car HOn30. 1015 couplers and MTL length axles. I used 36" N scale metal wheels from Eastern Seaboard Models. If you can support this model better, then please upload it.

Downloads
239
Likes
20
Rating
0
P
PrintablesMar Ber

Stacking Tray Set - fully customizable (incl. Fusion360-file)

Deutsch weiter unten 2023-08-20 New Sets added. A set of fully customisable stacking trays with lids, ranging from 1x1 to 5x5 chambers. All parameters can be customised with the supplied F360 file: Width, depth, useful height, rounding,…

Downloads
235
Likes
39
Rating
5
P
Printablesmosselini1

Prusa Balancing Game - Figure Base (fusion360)

While I suppose most people will design 3d models directly into the file, once printed this hexagon baseplate can also be used to glue/attach/… other figurines onto if you wish so.

Downloads
230
Likes
14
Rating
0
P
Printablesmosselini1

Gingerbread Woman/Girl (fusion360)

Not a feminist but I thought that a female version could complement nicely the male version initially provided. This is my take on this character, in the mean time 3DxDT made one as well but since our versions are different I publish it…

Downloads
226
Likes
28
Rating
4.86
P
Printablespix3l8e

Defcon32 Badge D-pad and AB buttons #DC32

EDIT: please also check out the new version that I made under my profile. Designed this D-pad and AB button covers for the DefCon32 badge. F360 design also included. Happy printing :-)

Downloads
223
Likes
15
Rating
5
P
Printablesmosselini1

Vacuum Bag Seal Clip (fusion360)

Due to their small size, losing them was always a worry for me. Therefore, I recreated the model to be able to print more if needed. This printed version works as well as the provided ones. If the provided clip was too small for your…

Downloads
219
Likes
31
Rating
5
P
Printablesmosselini1

Gyro Pendant (fusion360)

A nice little pendant that can serve many purposes: necklace, keychain, decoration, … . Add your own logo and show your love for it and for science at once with this gadget that will certainly start conversations. While not a direct…

Downloads
213
Likes
26
Rating
0
P
Printablesmosselini1

Multi Part King Tiger "Tiger II" German WWII Tank 1/72 (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the german cross which requires a filament swap (it is too…

Downloads
212
Likes
35
Rating
0
P
Printablesmosselini1

Multi Parts T34/85 medium tank 1/72 (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the soviet star which requires a filament swap (it is too…

Downloads
211
Likes
24
Rating
0
P
PrintablesChris Schmuck

HOn30 Davenport

This is a HOn30 Davenport made to fit a Toma Model Works #6191 power chassis with 7mm wheels and 14mm wheelbase. If you're not up for the challenge of adding he crank rods you can use the "plan B" frame, it has journals like Davenport…

Downloads
208
Likes
20
Rating
0
P
PrintablesFeatherblade

Fusion3 F410 Circular Fan Duct

A fan duct I designed for the Fusion3 F410 due to the stock shroud having poor part cooling performance on the right side of the hotend. Replaces the stock fan shroud and heatsink fan, so may work on other printers with an E3D volcano as…

Downloads
202
Likes
8
Rating
5
P
PrintablesChris Schmuck

HOn30 Casey Jones type rail bus

These are the parts I used to make my own freelanced railbus based on the Casey Jones of the Silverton & Northern. https://www.youtube.com/watch?v=1iZ76y9BxHk Category: Hobby

Downloads
200
Likes
17
Rating
0
P

Fusion360 MMU3 (Mostly Assembled)

To help with your viewing, these are rough imported objects with a lot of extraneous geometry lines. Please choose the “Shaded” display option to get a better picture.

Downloads
200
Likes
32
Rating
5
P
PrintablesChris Schmuck

HOn30 Locust Heights & Western Climax

The real locomotive was hand made and still runs. I used video stills to make the drawings. I used a Bachmann N scale 70 tonner with the circuit board removed. A 44 tonner would work as well. Category: Hobby

Downloads
199
Likes
19
Rating
0
P
PrintablesChris Schmuck

HOn30 Cincinnati Locomotive

HOn30 version of a Cincinnati Locomotive built by the Cincinnati Car Corp. This 3d model was made from photos and not scale drawings. To me it is a little bit big for HO scale. You can resize.

Downloads
198
Likes
19
Rating
0
P
PrintablesChris Schmuck

HOn30 Hoosac caboose

This is a HOn30 version of the 3' gauge Hoosac Tunnel and Wilmington railroad. I use Microtrains 1015 couplers and MDC N scale passenger trucks with 36" metal wheels. Category: Hobby

Downloads
196
Likes
18
Rating
0
P
Printableswittmason

HOn30 wooden box girder bridge (long)

Wooden box girder bridge with “X” cross beams. Made to be printed in place and supported from underneath. For best results print in resin. The details are too fine for FDM.

Downloads
196
Likes
26
Rating
0
P
PrintablesChris Schmuck

HOn30 Gilpin Ore Cars

HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.

Downloads
196
Likes
15
Rating
0
P
Printableswittmason

HOn30 wooden box girder bridge (short)

A shorter version of this wooden box girder bridge - based on this prototype Chris found .

Downloads
190
Likes
28
Rating
5
P
PrintablesWerkRaum

Generic Parametric box with friction fit lid. Highly adjustable in Fusion360

This model has a number of parameters to customize. These are: LidHeight The ratio body-2-lid vertical seperation InsideWidth / Height / Length As saved, the inside is variable and the outside = (inside + walls). If you want the outside…

Downloads
185
Likes
13
Rating
0
P
PrintablesMicah

Gridfinity - Loctite 401 20ml + Fusion360 File

Gridfinity Loctite 401 20ml Holder 1x2 Holder for loctite 401 Fusion360 File included to mix sizes to your own requirements. Other models Check out my other models https://www.printables.com/@Micah_754861 Category: Organization

Downloads
177
Likes
15
Rating
5
P
PrintablesChris Schmuck

HOn30 Grove Farm 0-6-0T

HOn30 Grove Farm plantation 0-6-0T. I used an Aru Model ARU-A4010 chassis on mine. Category: Hobby

Downloads
176
Likes
16
Rating
0
P
PrintablesMake'n'Modify

Tutorial: D20 - Icosahedron in Fusion360

This is by far not the easiest thing to do in fusion but it was a nice challenge and it might help some of you ;) Category: Engineering

Downloads
176
Likes
1
Rating
0
P
Printablesmosselini1

Multi Part Among Us (fusion360)

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. In addition to the main model in 4 parts, I added a decimated version of the base model for future remixes. Printing…

Downloads
173
Likes
20
Rating
0