2,197 models
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
Those brave souls who risk madness and worse to keep the web (mostly) organized and stylized. They deserve all of our thanks, but also perhaps just a bit of good-natured ribbing. Print this model and give the CSS guru in your life the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
This is directly inspired by the lovely Toker Poker . I claim no credit for the concept of integrating a tamper and poker into a sleek sleeve for a Bic lighter. The design seemed quite adaptable to 3D printing. I wanted to make something…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
GCODE FOR EDNER 3 S1 !
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
You can scale it for you and your cookies' needs :) This model is a remix of the original which was made by tomaslopez over at Thingiverse. https://www.thingiverse.com/thing:3578014
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Modified jaws for gripping at an angle. I use them for soldering components to PCBs.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Remixed from https://www.thingiverse.com/thing:3008571 Nozzle: 0.4mm Layer: 0.2 (Recommended) Supports needed Scale it as you like :)
Print approx. €21.81–€26.66 excl. taxPreliminary estimate for one variant
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Print approx. €12.51–€15.29 excl. taxPreliminary estimate for one variant
My Version of a Mini Cooper Badge in Black and Red
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Coperchio di ricambio per tagliabordi a batteria 20V PARKSIDE PRTA 20-Li Replacement cover for cordless trimmers 20V PARKSIDE PRTA 20-Li
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
Core One Fish : The Coreoperca Not one of the lucky few that got this ugly fish for doing a review? Fear Not! I bring you the aptly named Coreperca an East Asia perch that prefer clear, slow-moving currents in the middle reaches of…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Keychain model of Mini Cooper Logo.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Rotate it - it looks different from every angle! This is the fourth in a series of four “cathedral” ornament designs. Tomorrow, I'll publish the first of a new series of ornaments. I plan to publish one Christmas ornament a day for the…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for one variant
This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Good soldiers follow orders! Clone Trooper Phase II Cookie Cutter
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
This is a variation on my Cathedral Christmas Tree Topper. The only difference is that this time, the windows are open so you can see through them. The design looks great in any kind of filament - multi-color, transparent, rainbow, glow,…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. Both halves of the ornament print “right side up” so you can print with two or three color filaments and get the colors to line up…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
Eine schöne Seifenschale "Seifenoper" mit Fuzzy Skin schöne Oberflächen Zaubern. Mit herausnehmbaren Gitter und Wasserablauf
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
No tools necessary to assemble. Print 4x ring, 4x pin, 2x arc_wo_wall, 2x arc_w_wall The space between the walls 16mm Diameter of the ball I used in the video is 15mm
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Assembly is pretty simple, just slide the knife piece in between the handle piece, slide in the pin, and super glue the pin to the outside of the handle. The knife should slide smoothly in between the handle NOTE: Use the updated pin part…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Grey…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Samsung Galaxy A32 kryt na telefon s logem Mini Cooper. Kryt byl vytištěn z PLA na karbonové podložce s následujícími parametry: Materiál: PLA (Silver, White) Tiskárna: Ender 3 V2 neo Výška vrstvy: 0,2 mm Infill: 15% Rychlost tisku: 50-…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Z as cleaner. Ik heb het ergens gezien maar de afmetingen klopte niet voor de Core One, daarom heb ik ze aangepast. Ik heb 4 modellen gemaakt met een gaatje van 3mm, 3.1mm 3.2mm 3.3mm en 3.4mm. Zo kan je met product de as proper maken,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Dies ist eine einfache Ablage für unsere Bedienungsanleitungen einiger Küchengeräte. So bleiben die Anleitungen übersichtlich. Die Abmessungen sind 200 mm lang x 150 mm hoch x 40 mm innen (46 mm außen). Auf der Unterseite befinden sich 4…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for PETGSource material: PET
Abstraktní obraz Stormtroppera na zeď. 3mf je nastaven na dvě barvy filamentu. Kvalita 0.30mm. Author Luděk Sušický.
Print approx. €7.51–€9.18 excl. taxPreliminary estimate for one variant
A tree support working doorstopper, with a base. Utilizes brim to try and get support material on the base. You can adjust your tree support settings to get different results Requires 10 mm brim Tree supports (not auto painted) Reference…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
This thing will help you hold the car even though you are standing on a hill. (I recommend gluing or otherwise attaching a rubber to the bottom of the product to reduce the chance of the product slipping.)
Print approx. €15.96–€19.51 excl. taxPreliminary estimate for PETGSource material: PET
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
I made the Model and printed it, because i somehow lost the metal plate, so i had to Improvise and print myself a new one and glue it there so it doesn't fall out when the Extruder touches it. Print Settings: Layer Height: 0.06mm Wall…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
100x160mm sign, to let the world know your interociter is operational and available. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
copertura vetrino laser edile
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Držiak, ktorý udrží dvere na mieste
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
A quick remix in tinkercad to add a loop so I can have this on my keys. ive printed in resin and FDM and both came out great. I did make the top infill quite high for strength
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Added a through a hole in his skull so that you can put it on a thread. Also made a flat bottom, and now it prints without supports. Filament - YOUSU Matte Dual Color PLA <3
Come to the slightly smaller dark side! Stormtrooper skin for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. The Mini 13 version of is Vader also available. Get it here:…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Remix del diseño creado por Kalunho3d que a su vez hizo un remix del diseño de vvk187 Las mejoras que he aportado al diseño son: Diseño del pecho del Stormtrooper para que se pueda imprimir con cambio de color (M600) Las piernas se…
Print your own scale model ARC Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM…
A 1:12 and 1:48 scale Stormtrooper miniature! This miniature is part of a set of 20 available for purchase on my website or on my Patreon until February 2025. The full version includes separated bases, pre-supports for resin printing, and…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A solution I came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions: Please be careful . The fins on the heat sink…
Summary This is a model of a Austin Mini Cooper in a kit card style. Some characteristic details can be discovered. Equipped with separate exhaust and front & rear bumper :) After printing, the model can be assembled with the help of…
Ten model hełmu Stormtroopera został zaprojektowany z myślą o druku 3D oraz wiernym odwzorowaniu kultowego wyglądu znanego z uniwersum Star Wars. Projekt posiada wyraźne detale, gładkie powierzchnie oraz poprawne proporcje, co ułatwia…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to the size you need, no Supports! Another version: https://www.printables.com/model/443953-ergonomic-pet-litter-scoop-no-supports New! Super Scooper Squared!…
There are actually a few of these very cool Scout Trooper models available here on Thingyverse, But hey, nothing like having plenty of choice ; )
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A remix made for paperweight, for the weight I used 80% infill.
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
For the Simplified Version - I had to add cylinders to fill in the fragile suspension system shown below: If you are going to print it I would recommend the simple version.
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
Mini Stormtrooper Figurine - AMS version Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here:…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I really like the 5 color print, but the supports were a pain. So I redid the painting to the dark color scheme so it would only be 4 colors, which allowed me to use the 5th tool head for petg soluble supports. The supports got a bit…
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
A big thanks to Danny for providing the low poly model. I have done with it what I could. So hopefully it will be of use for your project. Good luck and do check the sizing suits your needs, Cheers Jace Print instructions Un printed as yet!
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the…
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
This puzzle box design is deceptively difficult. Locate the the solution plaque and restore it to the front of the barrel to display mastery over this fiendish challenge. As with all box-style puzzles, this design has a hidden…
Lego Storm Trooper Maxi figure At standard scaling, the assembled model stands 3.5" tall. You can decide how big you want to print it! Supports needed for printing. Have fun!
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
this is the Death trooper model but with a working death whistle inside. To get the best noise don't scale up or down. Blow at angle and make Shure the is nothing obstructing holes in it. it works best if you print in two parts then…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
A Storm Trooper piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
Dummy 13 StormTrooper Armor Assembly : The assembly is similar to that of DUMMY 13 except for the legs. The hip piece must be assembled before the thigh piece. Attention to the assembly of the arms: the parts have a direction! BTW I made…
Thanks again to DrMckay for providing this awesome rendition of Rogue Ones Shore Trooper. I have stripped the components back and split them up to the best of my ability and it could do with some serious smoothing. Something I have yet to…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
Another cool model found over at FacePunch.com. Cheers Jace
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace
Print your own clone army! By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature. The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab.…
I made this Lego Star Wars Kama for Lego Clone Troopers. I modeled this using SolidWorks. Check out my account for more Lego Pauldron's and kama's.
Dummy 13 X Clone Trooper Phase I Update 23/02/2025 : New CloneTrooper Phase 2 print profiles! Do you recognize him? Here is my version of the Clone Trooper Phase I These clone soldiers, created from the DNA of bounty hunter Jango Fett,…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
