DJI Osmo Pocket 3 - Stand (including .f3d)
Stand to place your DJI Pocket 3 safely on your desk.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
- Downloads
- 556
- Likes
- 45
- Rating
- 4.83
1,209 models
Stand to place your DJI Pocket 3 safely on your desk.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Long spoon/spatula to get the most out of your cosmetics bottles (ie. moisturizer, thick creams, etc.) Printed in PETG, but PLA works just as fine. Regular PETG presets, 0.15mm layer height.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…
Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant
An easy and simple design I started by reproducing the original model on a paper and use it as Canvas in Fusion 360 Then design the spatula using Circles and Splines One Extrusion and a Chamfer after here is the spatula ready to be…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
It's a holder for a RØDE VideoMicro at the DJI Osmo Mobile 3 Gimbal
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
The 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate. I also added a screenshot showing how it looks after slicing/rendering…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
A simple spatula 150 x 17 mm for applying cosmetics. This model is inspired by real spatulas, which are mainly made of wood. Unlike them, however, this model is intended for repeated use because it is washable ♻. Its flexibility can be…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Printed in PLA, 15% infill.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Dekorativní obal na kosmetiku A jiné
Print approx. €8.61–€10.52 excl. taxPreliminary estimate for one variant
Here, I present yet another storage contraption, this one sporting a fully symmetrical design which was the challenge I had In mind. Please read the text bellow before printing. 17-01-2024: Added files with 8,5mm opening for rods…
Hair, Makup, Cosmetics Organizer. Modular and Stackable
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
Supports up to two SD memory cards Assembly You will need six M3x30 screws.
Design by a Teenager, For a Teenager, Printed by Dad. We had a great time together getting this done.♥ Print instructions Prints With no support or infill. Around 16hrs
use the supports only for the upper slot for the LED and the helmet.
Holder for action camera in two versions with a diameter of 100 + 32 mm. It can be used in combination with double-sided adhesive and tightening tapes. Necessary components Osmo Action 4 Locking screw M5 nut Recommended material ASA /…
This is a remix of RiffleHatchs DJI Osmo Pocket3 GoPro Mount over thingiverse. Require a single M5 square nut. Use Snug Supports, ensuring they are positioned solely at the edge of the square nut slot and not inside it (refer to the photo).
mali kosmici wraz z dodatkami chcesz mały wydruk albo i nawet testowy to cos idealnego jak i fajna zabawka czy ozdoba
The stylish cosmetic organizer is not only used for lipstick and the like, but it is also practical for rings, necklaces, and other jewelry. This way, everything has its own place. Der stilvolle Kosmetik-Organizer wird nicht nur für…
An airgun silencer, model supplied for 22 calibre, with an expansion chamber and K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns, designed for the Crosman 2250 “Ratcatcher.” Firearms…
Assembly Once you print the monke and cosmetic, add a magnet to the cosmetic and the top of the monke using superglue Wait to dry and then you can simply attach the cosmetic If you dont have a magnet print the ‘small magnet’ model and the…
Description: Introducing a cover specifically designed for the DJI Osmo Action 5 Pro. This piece not only provides excellent protection for your device but also features a knurled grip that enhances handling and installation. Features:…
I've been having fun using Shred-er mags with the Vigilante, but in my shop I'm frequently hunting insects larger than flies. A little more ‘oomph’ would be fun. Current versions: The V10 barrel and V8 cylinder are quite functional, well…
Simple camera head cover for DJI Osmo Pocket 3.
Rugged box for DJI Osmo Action 4 Camera This has more storage space, SD card / ND Filter Inserts than original. 6 x 30mm M3 bolts required - you can find these on Amazon & AliExpress. Note: You can use full or half threads, I think half…
Dji Osmo Action 4 cam cover
orient the parts just as suggested by TheSamenameTwice. I glued small foam bits to the lid with hot glue to keep the parts from sliding around when the box is closed.
Découvrez le modèle 3D de la nouvelle caméra DJI Osmo Action 5 Pro 🎥 que j’ai recréée en détail ! Ce fichier est parfait pour vos projets de conception, d’impression ou de simulation. 🛠 Je fournis les fichiers dans plusieurs formats 📂 :…
Hexa Beauty is a compact and stylish desktop organizer designed to keep makeup and cosmetics neatly arranged and easily accessible. The organizer combines open storage for bottles, creams, perfumes and makeup tools with four smaller…
These are drop in replacements for the top most red plates on the Dart Zone Outlaw. To remove your stock plates, undo the 3 screws, and then you will need to pull them out. There is a clip towards the back of the plates near the rear iron…
USB-C Door for cable support and to reduce cable strain on the Action 4 Cam. Found myself knocking around the camera cable a lot when livestreaming ergo this little block to help support the cable better. I've printed most of my test…
Side handle for the DJI Osmo Action 4 camera. It will also work for the 3 and the 5 Pro To assemble, simply put the magnetic mount in the side of the handle (make sure it's the right way around). Then slide the safety pin in the bottom;…
This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…
(Every file is x1, print once - for each file name - unless otherwise marked. (The .3mf and .stls are the same thing for each file name, with or without lettering objects for multi-color; you don't need to print both! Instruction PDFs…
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
Two parts Connected with magnets Magnet size: 5mm diameter, length 8.5mm Printed with auto generated supports…
Cute customisable astronauts: Cosmic Cuties No supports needed for the sitting cuties, but supports are required for the standing astronauts. Choosing your Cosmic Cutie: They are made for 16mm marbles (see below for different sizes). The…
Modified version of the desktop stand, now with: - round base - cutoff for strap - fits charger/usb - small footprint - stable stand
I designed a new Osmo Pocket desktop stand because the others didn't like it. https://youtu.be/oLgojWxlXuQ Print Settings Printer: Micromake C1-mod Rafts: No Supports: No Resolution: 0,15 Infill: 20 Filament brand: Devil Design Filament…
Dji Osmo pocket 3 desktop stand, cut off the strap , works with handle charging port
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
Silencer for the Crosman 1077. 105db without supressor, 80,1db with supressor. Neighbourfrindly ;-) I print it with 60% infill. I print it with ABS, but i think PLA is also working. Thx to Sidenius and BlixFox! Category: Sport & Outdoors
This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…
This losmandy-style dovetail is intended to be mounted on top of a telescope for accessories like minipcs, dew heater controllers and power-distro. All threaded holes are M6x1 threading. This bar is intended ONLY for top mount use, do not…
Size cca depth 155 x width 197 x hight 124mm. For B1,2 you can use brim. First complete parts B and D. Filament need cca Base 60, inserts 60, Drawer 19m. Tested PLA 0.2mm, random seam.
To print these, stand them up on the “back” of them (where the flat bit is) and have supports running up them where the letters are. I heavily recommend tree support. Be careful when removing the supports, as the “a” letter is fragile. To…
Remake retrohračky “výsadkář” od IRISA Vsetín. Jako dítě jsem vystřelovacího parašutistu zbožňoval a jsem rád, že mi na jedné FB diskuzní skupině tuto hračku připomněli a já se vrhnul na remake. Pokusil jsem se dodržet koncept a rozměry…
case with hotshoe print in 2 parts prusa mini pla with support Category: Camera
Habe hier eine GoPro bzw. DJI Osmo Action Cam Halterung für KTM Motorrädlenker mit 28mm erstellt die in der mitte aber eine 33mm Schale haben. Da speziell bei KTM die untere Lenkerbrücke einen Verbindung um das Lenkerrohr mit anderen…
Organizer for cosmetics dimensions 210x210x120
Bonjour à tous, Je vous partage les fichiers de ma DJI Osmo Action 6. Je mets à disposition le STEP, le fichier SolidWorks et le STL pour que tout le monde puisse dessiner ses propres accessoires ou supports en toute liberté sans avoir à…
Rugged box for DJI Osmo Action4. All parts (except handle) of the adventure kit can be fitted into this box. The lens protector in the picture is this model: https://www.printables.com/de/model/694351-dji-osmo-action-4-cam-cover
The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…
This is a very easy and simple clip on accessory for DJI Osmo Pocket 3. It adds a cold-shoe mount without adding much bulk. It maintains all functions and other attachments for your Pocket3. The gaps between all moving parts are 0.3mm. I…
Grips designed for go-pro didnt fit my DJI Osmo Action Camera - so i developed this "Shorty" Type Grip for DJI Osmo Action Camera. Requires only 1 Hex Nut - Fits with original DJI case and screw. Pass through for wrist strap and Lens Cap…
Pocket 3 have common problem - sometimes screen spring stop working and screen gets stuck in middle position. Since spling placed in such place where it can't be reached for repair, one of possible solutions is to use my frame. What frame…
A basic lens cap to keep my fingers off the Osmo lens. Printed in nice, ultrasoft TPE88 from Filament PM.
I recently built myself a Dan Pistol - a compact foam dart/nerf pistol designed by Orion Blasters! [Hardware kit bought from OutofDarts]. The blaster is an enjoyable project; it is still in beta, so be prepared for some tweaking here and…
The perfect gift for any makeup enthusiast, this elegant box is designed to keep all cosmetics and beauty tools neatly organized. Its stylish appearance adds a touch of sophistication to any vanity or dressing area. Visit my Thangs.com:…
See it in action! Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print…
Printing I use 4 parameters to make the threads solid. Seams I chose to place randomly, to not make it weaker in one spot and to keep negative aesthetic impact low. I used snug supports to keep the cavity for the seal clean; it's easy to…
I used an M5 brass insert for the threads, if requested I can provide a model which utilizes a nut instead To ensure strength requirements please print at recommended settings or higher, Print settings: Walls - 6 Top - 6 Bottom - 6 Infill…
This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included
This GoPro mountable holder is for the DJI Pocket. Worlds smallest 3d Gimbal with 4k. The Pocket is just released (December 2018), but currently, DJI is not offering the universal mount. It will be available within a few weeks. When I…
Printed with 0.4 nozzle, 0.2 leyer height, perimeter, 15%. If You like it - like it :)
Crosman Vigilante Pellet Clip This clip works the same as the OEM pellet clip and the bug-a-salt clip. Print Settings Printer: Bambu Labs X1C Rafts: No Supports: No Resolution: 0.2 Infill: 35 Filament: Overture PETG Black Notes: Printed…
Made this to help with the design of TPU mounts for my camera.
DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360) Description: This is a custom-designed lens protection cap for the DJI Osmo Nano. It’s available in two variants, optimized for different materials: TPU version…
This insert is for the DJI Osmo Action 4 camera. This insert goes into the Rugged Hard Case (see link below for download). This is one of many inserts for the Rugged Hard Case. https://cults3d.com/:1767379
---------------------------------------------------------------------------------------------------------------- Update V2 The initial model included overlapping volumes which did slice correctly in an older Prusaslicer version but not in…
I created this Losmandy style camp, so I can attach whatever I like on my OTA. I found some others on the internet, that did not clamp enough or used imperial sizes. This is a remix clamping better for me and using regular nuts and bolts.…
I love Crosman 1377 / 1322 Silencer Adaptor by k19k19 , but I printed it and adjusted the design multiple times and just couldn't get a model strong enough or that would print cleanly and nicely enough. So I remade it from scratch with…
I remixed a supportless box and created/designed the inlay myself.
Hi! Here you find a softcase for the DJI Osmo 4 Action Camera with the standard screw mount. I printed it with Soft TPU (Shore 90) and also with the “normal” TPU (shore 95). I printed it with organic supports. Please feel free to comment,…
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low…
I was asked to round the corner of the already excellent spudger from AeroSteveO and figured there might be others who need the rounded corner.
DJI Osmo Action 4 Lens Protection Cap -It is the cap for protection the lens of the camera. -I added both with logo and without logo versions. -Also STEP version is added for future improvements. -Cap may fit your lens tightly at first.…
A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…
A DJI Osmo Pocket 3 backpack mount. Can also be mounted on GoPro mounts. Based on @Rimzler's model. With an open bottom for the USB port. This makes external connections possible. An incision was made for the joystick.
I am going on a trip soon and wanted a simple grip that I could use with my DJI Osmo Pocket 3, and I couldn't find one. So, I went ahead and made one using parts from other models I found along the way (linked at the bottom). This grip…
La modification d'un modèle créé par Krhom pour la DJI OSMO NANO. Petite modification de ma part pour l'adapter sur une griffe GoPro.
This is a cap for COSMO CA superglue that allows you to use luer-lock (or luer-slip) needles for more precise glue distribution.
this is very poorly edited, but I'm lazy. for other lazy people only. Thanks!
This is an insert for the board game Cosmoctopus by Paper Fort Games. This insert allows for the tentacle resource organizer that came with the Kickstarter version of the game to be stored at the bottom. Just in case you don't want to…
Remix of @Jerry_Lee 's model. I replaced the cold shoe with a GoPro mount. Thanks Jerry!
The foosball crew at work broke one of the foosemen on our Tornado table. Since I'm known as the guy who can get things done, they asked me to make a replacement. I used the one they broke to make this model, mine has a hat brim and an…
Holder for original DJI Osmo Pocket to mount it onto various other holders. Compatible with Arca-Swiss clamps, GoPro finger mount and standard tripod mount (1/4"-20 nut required). Also has two cold shoes on the side to facilitate…
A small lens cap for the DJI Osmo Action action camera. Knurled edge, embossed “DJI” on the front to remember what it is the lens cap for. One version with eyelet for attaching a loop of string, one without.
This is a replacement propeller and peg for the Kosmos Easy Elektro Construction Kit. I have created three versions of the peg with different hole diameter. The 2.3mm version worked perfectly for me, as it needs to be a tight fit on the…
I modeled this case for printing on a 3d printer. All you have to do is insert any suitable pin into the lid loop.
Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text
# 3D Printable Open Stick Modular - Mini (OSM-Mini) --- ## Attribution The following text must be included in any distribution of derivatives of this board. All links must also be included. Copyright 2024…
🎒 DJI Osmo Mobile 7P Rugged Case – Ultimate Travel Protection 💪🎥 This rugged case is designed to safely carry your DJI Osmo Mobile 7P and turns it into a complete vlogging kit on the go! The model only contains the case. As I don't have…
This was made for a friend, It would probably work best on a resin printer, I have an FDM printer and am not sure if Its possible to print
Round cosmetic organizer with place for cotton pads and ear cotton buds. Material: PET-G, PLA, ABS etc. Layer high: 0,3 or lower No supports needed.
I remixed a supportless box and created/designed the inlay myself. Bigger version for more accessories.