Search results: otorcycle

Sort order

Counting matching models…

P
PrintablesJohnM

Roadlok motorcycle disc lock pin carrier

The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…

Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
457
Likes
15
Rating
5
P
PrintablesFabrizio

American Touring Motorcycle Gave One F**K Twin CamTimer Cover

Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
313
Likes
31
Rating
5
P
Printablescurcuz

Motorcycle Helmet Hanger with keys hook

keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567

Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
182
Likes
17
Rating
5
P
PrintablesBlackFury

No Logo & Thicker Motorcycle Kickstand Extender

This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
16
Rating
0
P
Printables3D-Fuchs

Phone stand - Aprilia RSV Motorcycle

This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
25
Rating
0
P
PrintablesOld Machinist

Alta Redshift Motorcycle KTM Headlight Conversion Parts Kit

These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…

Print approx. €6.67–€8.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
103
Likes
20
Rating
0
P
PrintablesheyPJ

Spacer for Peak Design motorcycle phone mount for Yamaha Tenere 700

This is a spacer for the cross bar behind the windshield of a Yamaha Tenere 700 motorcycle. It steps down from the smallest diameter that comes with the Peak Design motorcycle phone mount to the cross bar diameter. I know it's a simple…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
4
Rating
0
P
PrintablesWerkStattWunsch

NamePlate FENDT for Motorcycle Roller Chain Key Ring

A little FENDT name plate for the amazing Motorcycle Roller Chain Key Ring from Bootjevaarder: https://www.printables.com/de/model/180357-motorcycle-roller-chain-key-ring As far as I know FENDT never built motorcycles , but I wanted to…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
5
Rating
0
P
PrintablesOBConcepts

Zero motorcycles rear fender hole blocker

Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…

Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
10
Rating
5
P
PrintablesSteveS42

Motorcycle Boot Clip

A while back, a friend of a friend asked me to make him a clip for his motorcycle boot to replace a broken one. They sent me pictures and measurements and I recreated it in Fusion 360. I made a few in ABS and ASA. It is a quick print, but…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
3
Rating
0
P
PrintablesF3DX

Motorcycle registration holder for Spanish plate - Portamatrículas de moto

Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
10
Rating
0
P
PrintablesJT3D

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
3
Rating
0
P
PrintablesWill

iPhoneX Motorcycle Bracket

Slide in bracket to hold the iPhoneX that I use on my motorcycle. Requires a mounting device like the Wunderlich MultiPod or RAM mount, 2 screws and nuts. I am new to 3D printing so if you have improvement suggestions or comments let me…

Print approx. €6.58–€8.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
5
Rating
0
P
PrintablesOld Machinist

Alta Redshift Motorcycle Rear Side Panel Repair Brackets

Part can be printed in two pieces without affecting functionality. Attached are both the two piece and one piece model files. One piece print will require supports, two piece will print without, just add brim and print. On the two piece…

Print approx. €10.96–€13.40 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesMarc

strap/tension belt mount for motorcycle crashbars / Spanngurthalter für Motorrad Sturzbügel

I secured my bags against movement with these tension belt mounts. Tested on a 3 week offroad morocco trip without any issues. The outer diameter of the crashbar is 20,3 mm (0.8 inches). The screws used are M6x20 and a locknut. I…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
4
Rating
0
P
PrintablesOld Machinist

Alta Redshift Motorcycle Rear Fender Brass Insert Repair Part

This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesOld Machinist

Alta Redshift Motorcycle Dune Safety Flag Fender Guide

Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesMonkeyMK

Motorcycle rearview cap

Motorcycle rearview cap M10 left thread and M6. Create the possibility to close the hole of the originale mirror on your bike with a screw. I suggest to glue the insert on a screw, then screw them in the hole of the mirror.

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
PrintablesRACBOTS

Casco Moto Llavero - Motorcycle Helmet Keychain

Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm

Downloads
5,757
Likes
557
Rating
5
P
Printablesboomke

motorcycle helmet holder

Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…

Downloads
4,881
Likes
578
Rating
5
P
PrintablesBootjevaarder

Motorcycle Roller Chain Key Ring

General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…

Downloads
4,624
Likes
1,737
Rating
4.88
P
PrintablesBootjevaarder

Motorcycle Key Ring

Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…

Downloads
3,799
Likes
894
Rating
4.87
P
PrintablesTmpx64

Motorcycle / Motorbike / Scooter / Moped Keyring / Bike Keyring/Keychain - Key Charm - Gift idea - Gift inspiration - Klíčenka skůtru

One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…

Downloads
3,384
Likes
446
Rating
5
P
Printables3Diocrity

Motorcycle Throttle Stop (Cruise Control)

Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…

Downloads
2,812
Likes
322
Rating
4.94
P
PrintablesNiffels

motorcycle chain lube thing for 520 chains

Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…

Downloads
2,621
Likes
632
Rating
4.91
P
PrintablesMolodos

Parametric car/motorcycle license plate keychain (Nummernschild/Kennzeichen)

A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…

Downloads
2,532
Likes
454
Rating
5
P
PrintablesZbysekz

Motorcycle helmet holder

Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.

Downloads
2,220
Likes
309
Rating
4.88
P
PrintablesPugwash

Dummy 13 Motorcycle Helmet with Posable Visor

A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…

Downloads
2,120
Likes
471
Rating
5
P
PrintablesBostra

Motorcycle helmet hook.

Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.

Downloads
1,902
Likes
295
Rating
4.94
P
Printablesvicesat

Body Air Intake (Riding a Motorcycle)

No Supports > 35% Best in TPU (more confortable)

Downloads
1,746
Likes
1,654
Rating
3.67
P
PrintablesDr Operator

MINI 13: Motorcycle

I wanted to do more to show the potential of the Mini 13 frame and how you can use it to make more than just awesome 3.5" action figures so I made a motorcycle for Lucky/Mini 13 that is built on the Mini 13 frame. On top of downloading…

Downloads
1,606
Likes
590
Rating
5
P
PrintablesMrBone66

Motorcycle Helmet Hanger

Hang your helmet on the wall for easy storage. Securely holds in either direction. Print in any material with 3 perimeters and 15% infill with supports.

Downloads
1,597
Likes
279
Rating
4.93
P
Printablesreddadsteve

AKIRA motorcycle

Kaneda’s bike - Akira motorcycle. Akira is a 1988 Japanese animated post-apocalyptic cyberpunk action film directed by Katsuhiro Otomo, produced by Ryōhei Suzuki and Shunzō Katō, and written by Otomo and Izo Hashimoto, based on Otomo's…

Downloads
1,571
Likes
604
Rating
4.94
P
Printablesrichmitch

Hubless print in place motorcycle

I liked the idea of a hubless motorcycle, so this is what I came up with... of course there are no handlebars to steer... erm that would ruin the look :-) The wheels do spin though and it is print-in-place, so no supports required :-)…

Downloads
1,445
Likes
214
Rating
4.8
P
PrintablesCADScott

Motorcycle Chain Oiler Block - 520, 525 & 530 Size

This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…

Downloads
1,429
Likes
195
Rating
5
P
PrintablesG4ZO

Motorcycle helmet holder

No need for supports.

Downloads
1,388
Likes
287
Rating
4.93
P
Printablesmelkon09

Self Balancing Motorcycle Cup Holder

I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…

Downloads
1,320
Likes
257
Rating
5
P
PrintablesJahn Roux

Motorcycle Helmet Hanger

A simple hook to hang your motorcycle helmet on with a hook that fits a plastic coat hanger for a jacket.

Downloads
1,301
Likes
161
Rating
5
P
PrintablesMartin Prager

Motorcycle Throttle Wrist Lever with teeth

I added teeth because original design was slipping on my handles. Category: 3D Printing

Downloads
1,231
Likes
197
Rating
5

Harley Davidson motorcycle Designer Ed van der Heijden

Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Bolt 3 times M2 x 20mm, 2 times M2 x10mm Rems do not use support!!!! only rems: Speed 60mm/s

Downloads
1,184
Likes
262
Rating
5

BMW R60/2 motorcycle 1964 scale 1:6 Designer Ed van der Heijden.

BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s

Downloads
1,176
Likes
367
Rating
4.75

Wall Mounted Motorcycle Helmet Hanger

There are plenty of helmet mounts out there, but I didn't love any of them so I went ahead and made my own. Easily prints on its side with no supports necessary. I made mine out of PLA-CF with 4 layer wall width and 20% infill, and its…

Downloads
1,156
Likes
141
Rating
5
P
PrintablesVize3Dtisku

50+ Keychains of moped, scooter, veteran and motorcycle

Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…

Downloads
1,151
Likes
176
Rating
4.6
P
PrintablesGorby

Motorcycle Helmet Hanger with Hook

This remixed hanger for motorcycle helmet includes a large hook that can fit an MC jacket and pants.

Downloads
1,120
Likes
93
Rating
5
P
Printableswagnerjack228

Motorcycle Helmet GoPro Mount

This motorcycle helmet GoPro mount was designed for the Scorpion EXO-T510 Full Face Helmet. The part can be heated with a heat gun to match the profile of the helmet more closely. If this helped you out, tips are welcome on PayPal or…

Downloads
1,069
Likes
192
Rating
5
P
PrintablesFabrizio

UPDATED American Touring Motorcycle Oil Filter drain pan

drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing

Downloads
1,051
Likes
80
Rating
4.67
P
Printablestuny

Dummy 13 Motorcycle Helmet

Dummy 13 Motorcycle Helmet You gotta be safe when you're out riding in the wilderness. Get your helmet here and protect that precious, plastic head! :P (Pictured below with the Dummy 13 Dirt Bike and the Light Kit I designed for it!)…

Downloads
1,047
Likes
305
Rating
5
P
Printablesnouc

Motorcycle chain "slack ruler"

Hardware required: socket head screw: M5, length: 15-35mm

Downloads
989
Likes
154
Rating
5
P
Printablesklimoma

Ducati motorcycle - wall art

Ducati motorcycle - wall art, easy to print

Downloads
963
Likes
137
Rating
5
P
PrintablesDavid Šilpoch

Motorcycle Handguards

handguards for your motorcycle frinted from petg

Downloads
945
Likes
88
Rating
0
P
PrintablesOld Machinist

KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…

Downloads
910
Likes
44
Rating
5
P
PrintablesAlbatrog

Clamp - Universal motorcycle phone holder

Since all the phone holders I found online were either expensive or just bad, I decided to make my own. Note: This was designed for metric standard elements and 23mm handlebar diameter. Contact me if you want me to redesign it for…

Downloads
867
Likes
191
Rating
5
P
Printablesthall72
Downloads
848
Likes
136
Rating
5
P
PrintablesHekMaker

Wall mounted motorcycle helmet holder

I have made a new design based on the Thingiverse model: https://www.thingiverse.com/thing:1647126 I have made the design with the same appearance and measurements, but adapted only to one hole at the top. I have printed it with PETG at 3…

Downloads
839
Likes
61
Rating
4.67
P
PrintablesNorfus

Detachable Devil Horns for Motorcycle Helmet

Detachable devil horns for motorcycle helmets. Can be detached from a base on the helmet. Mounted using a twist lock / screw mechanism. I recommend printing it in PETG and printing screw_in_mount and screw_insert slower for better print…

Downloads
830
Likes
103
Rating
0
P
Printableszwoolf

Motorcycle Helmet Wall Hanger

I needed somewhere to store my motorcycle helmet, and thought this simple wall hanger might do the trick. I printed this in PA-CF with the Bambu Lab X1 Carbon. Layer Height 0.2mm Filament - PA-CF Orientation - Print on Side (better…

Downloads
785
Likes
112
Rating
5
P
Printablesanonimowy891

Motorcycle helmet hanger

Simply hanger for moto hemlet.

Downloads
761
Likes
175
Rating
4.86
P
PrintablesIulian Lupescu

Motorcycle Chain Oiler

Angled Motorcycle Chain Oiler. You can use zip ties or tape to fix it on the spray tube.

Downloads
757
Likes
162
Rating
5

BMW R32 motorcycle year 1925 scale 1:6,5 Designer Ed van der Heijden.

BMW R32 year 1925 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s All axles are equipped with m3. Likewise the fork pin is m3.

Downloads
713
Likes
215
Rating
5

Harley Davidson motorcycle year 1910 by Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s

Downloads
710
Likes
172
Rating
5
P

GoPro Quick Release mount for Bike Motorcycle Helmet LS2 FF327 CHALLENGER

This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…

Downloads
708
Likes
110
Rating
5
P
PrintablesOpenair

Motorcycle helmet icon

Motorcycle helmet icon

Downloads
683
Likes
40
Rating
0
P
PrintablesContraptor Lab

<BRB> Motocross | Motorcycle - Keychain

<BRB> Motocross | Motorcycle - Keychain

Downloads
677
Likes
66
Rating
5

Indian Chief motorcycle year 1947 designer Ed van der Heijden.

Indian Chief year 1947 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA

Downloads
658
Likes
146
Rating
5
P
Printablesrevoxsvko

Speedway motorcycle wall deco

Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.

Downloads
651
Likes
88
Rating
5
P
Printableserickgull

ghost rider + motorcycle (chibi version)

Figure designed in a chibi version of GhostRider model articulated with his motorcycle printed in pla and resin joined.

Downloads
617
Likes
159
Rating
5
P
PrintablesFilip

Triumph Motorcycles Logo

Made to be glued on two sides of motorcycle, but there's much other ways it can be used. I recommend printing this with 0.2mm or 0.25mm nozzle as the embossed part is quite thin.

Downloads
612
Likes
51
Rating
5
P
PrintablesGreenhat

Indian Motorcycle Light Box

Light box with Indian Motorcycle Logo. Print instructions 2 Files. one is the case and the other is the face. Face: Size is designed to be 162x162x3 I sliced it to do white for the first MM and black for the last 2 mm. GCode is already…

Downloads
611
Likes
113
Rating
4.86
P

Motorcycle ToolBox

A Tool box for the bag carrier of my scrambler. I uploaded the files without the mounting holes, so it should fit other bikes too. Opening for the lock is suitable for a "Burg-Wächter ZS 84 SB", others may fit too. Depending on the lock…

Downloads
583
Likes
200
Rating
0
P
PrintablesFranky 71

Porte clé moto - motorcycle key holder

Porte clé moto, prêt pour la saison… Bonne impression et surtout bonne route, soyez prudent! ✅ 5 Johann ZARCO ✅ 20 Fabio QUARTARARO ✅ 46 Valentino ROSSI ✅ 63 Francesco BAGNAIA ✅ 93 Marc MARQUEZ Si vous aimeriez un autre pilote dites-le…

Downloads
570
Likes
51
Rating
5
P
PrintablesORDEEP

Honda Motorcycles Magnet

Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.

Downloads
554
Likes
69
Rating
5
P
PrintablesLayerShare

Oukitel RT3 Motorcycle mount

THIS IS EXPLICITLY NOT FOR COMMERCIAL USE A motorcycle mount for an Oukitel RT3 rugged tablet against a 22mm bar. The design is intended to be modular and allow different mounting points. The intent is to use the rugged Oukitel RT3 for…

Downloads
553
Likes
36
Rating
5
P
PrintablesMonkeys3DP

Motorcycle Throttle Tube

Throttle tube for motorcycles fits my Honda CG125 BR-J Printed mine in PETG and has lasted perfectly with minimal wear Regular grip fits well and holds well due to natural layer lines from print Print with supports, i recommend paint-on…

Downloads
550
Likes
83
Rating
4
P
PrintablesJesse

Motorcycle keychain

Will add a photo of my print once its complete 0.4 Nozzel 0.14 - 0.20 Layer height 2 Walls 2 Bot layers 2-3 Top Layer 7-15% Infill These are my settings may not work for everyone, I use PLA don't see why it wouldn't work with PETG

Downloads
548
Likes
47
Rating
5
P
PrintablesJohn

Motorcycle kickstand extender

A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.

Downloads
544
Likes
152
Rating
5
P
PrintablesJakub Jurczyk

1:15 | 2025 Honda CB650R | Motorcycle Model

Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…

Downloads
536
Likes
175
Rating
5
P
PrintablesJaneo

Motorcycle wheel ring

motorcycle wheel ring

Downloads
532
Likes
80
Rating
4.5
P
PrintablesT3CHKOMMIE

Motorcycle Hand Guards and Mounts for Vstrom 650 (and others)

I was looking for a simple set of hand guards to take the wind off my hands in the winter and maybe handle a few bugs/rocks/rain in the summer. I couldn't find anything else online that I could remix, so I spent MANY hours with FreeCAD…

Downloads
528
Likes
86
Rating
5
P
PrintablesMarkus Skjot

Motorcycle parking brake

A handy tool to secure the brake handle of your bike in braking position. Printed in PETG with layer height 0.2mm, other filaments should work just fine.

Downloads
527
Likes
101
Rating
4.5
P
PrintablesJeremy Hughes

Motorcycle helmet wall hook

A hook for hanging a motorcycle helmet on a wall. Designed for countersunk screws with 7mm head and 3.5mm threads. Print instructions Category: Automotive

Downloads
522
Likes
108
Rating
5
P
PrintablesFuganater

Modern Key Hanger Fobs (Scooter/Tuk Tuk/Minivan/Motorcycle/House)

I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…

Downloads
510
Likes
258
Rating
0
P
PrintablesIulian Lupescu

Motorcycle Helmet Hanger

This is not my model! I just took it from Thingiverse and uploaded here. All the credits goes to SergiLorenzo. Just the photos are mine. I needed a wall mount hanger for my motorcycle helmet, so I decided to print this one. Settings that…

Downloads
501
Likes
100
Rating
5
P
PrintablesJulio

Motorcycle 525 Chain Oiler

Chain Oiler for 525 motorcycle chain for optimal oring lubrification 0.1mm 15% in fill

Downloads
499
Likes
58
Rating
4

Indian motorcycle single cilinder 1910 designer Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Certainly! Here's a brief overview of the history of the 1910 Indian Single motorcycle: The…

Downloads
498
Likes
91
Rating
5
P
PrintablesJunorion

80s TONKA Motorbike / Little Red Motorcycle Dirtbike Toy

I loved this little toy when I was a kid. I recently got one and really wanted to try a 3DP version so here it is. The model is split into left and right sides and uses 4 materials (PLA Red, Blue, Silver,Black @ .020mm SOLID layers) .…

Downloads
490
Likes
55
Rating
4
P
PrintablesKen226

Indian Motorcycle Kickstand Pad

Keep this under the seat of your Indian. Next time you park on dirt, this could save you from dumping your bike. Print with plenty of infill, and switch filaments at the appropriate layer to get the nice logo infill.

Downloads
490
Likes
50
Rating
5
P
PrintablesHennie

Motorcycle puzzle

This Motorcycle puzzle was originally a woodworking project of my brother in law (as shown in the picture with the red details). I took the original and made a drawing as an SVG file. With Fusion 360 I created a 3D model. The black parts…

Downloads
484
Likes
102
Rating
4.75
P
PrintablesMoto

Motorcycle Glove Rack

Print on flat side, no supports, 100% infill Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 100% Filament: Spool3D PETG Category: Other

Downloads
471
Likes
78
Rating
5
P
PrintablesZneuzity

Motorcycle helmet hook wall mount with key holder

Simple wall mount holder for motorcycle helmet Simple helmet holder wall mounted can be print PLA. It can fit in any type of helmet brand include additional hook design for the keys to hang. recommended 4 perimeters = % infill doesn't…

Downloads
461
Likes
30
Rating
5
P
PrintablesSutnaarPRINTS

Motorcycle helmet chin mount!

Motorcycle helmet chin mount! It fits most of integral helmets! Print it! Fit your GoPro and record awesome moments! Printer brand: Creality Printer: Ender 3 PRO Rafts: No Supports: yes Resolution: .16mm Infill: Bets is 100% but you can…

Downloads
456
Likes
92
Rating
5
P
PrintablesRi3del

moPad (Motorcycle Side Stand Pad)

The original pad was a bit too big and didn't fit to the flat protruding side stands like those of a chopper. V3 is even smaler. Das ursprüngliche Pad war etwas zu groß und passte nicht zu den flach abstehenden Seitenständern wie das…

Downloads
436
Likes
81
Rating
5
P
PrintablesJaneo

Motorcycle helmet hanger

Wall mount designed for hanging a motorcycle helmet and gear. It features a simple yet attractive design that works well for organizing items at home or in the garage. The simple design allows for easy printing on any printer without…

Downloads
428
Likes
73
Rating
5
P
PrintablesWhiskey

Motorcycle Clip-on angle finder

Update:I have a V2 files uploaded. Should be a little more stable. All the slide nuts and fork tube adapters should still work. This is a work in progress as i refine the tool ill upload new versions. Saw a similar tool online but could…

Downloads
421
Likes
23
Rating
5
P
PrintablesPauly

Motorcycle M10 Mirror Screw Plug

A screw for the standard mirror mount on your bike if u drive mirrors on the end of the handle bar.

Downloads
418
Likes
30
Rating
5
P
PrintablesMars3d

Llaveros Indian Motorcycles

Llaveros del logo de "Indian Motorcycles", famosa marca de fabricación de motos. Los diseños de estos llaveros son con un del logo principal de la marca. Están diseñados para imprimirlos con cambio de color, de 2 colores o de 3 colores.…

Downloads
414
Likes
46
Rating
5
P
PrintablesStuart

Yamaha Logo Motorcycle Tank Badge

This is a Yamaha tank badge that I designed and printed for my KZ650SR tank. The holes centre to centre are 123mm, and accept 3mm countersunk screws. I printed this in PETG at 100% on an Ender 3 and the size fit my tank perfect. The print…

Downloads
413
Likes
55
Rating
5
P
PrintablesJordanBurghoff

Motorcycle ID Card Holder

ID card holder to mount a CAC or ID badge on the handlebar of a motorcycle or bike. Models for 1 inch and 7/8 inch bars. The holder has a cutout to avoid covering the information on both sides of military CACs. Great for getting through…

Downloads
400
Likes
59
Rating
5

Indian motorcycle Double cilinder 1913 Designer Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Here's an overview of the Indian Motorcycle Double Cylinder 1913: The Indian Motorcycle…

Downloads
398
Likes
87
Rating
0
P
PrintablesPLAUK

Motorcycle Chain Lube Tool (525/530 Chain)

Motorcycle Chain Lube Tool (525/530) Tool for lubrication of a 525/530 motorcycle chain. Print text down, no supports required. Use a releasable zip-tie through the channel to secure the tool to the aerosol. Cut the straw to length, so it…

Downloads
396
Likes
43
Rating
5