330 models
Router guide you for use with the flex shaft (and clones). One normal version and one with a flat side so you can squeeze it into awkward spaces. I use it for putting notched holes in Bud Enclosures with a flush trim bit. Don't try to use…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Printed with 10% filling. The photo of printed model is in tricolor PLA blue green orange. No need supports.
Print approx. €6.96–€8.50 excl. taxPreliminary estimate for one variant
A stomach flu visited the family and when I was bathing the youngest one for the third time in the middle of the night, I realised that we only have one million bath toys and we needed more! I started thinking about water pressure, and…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
You can use this as a strainer lid on top of a mason jar to germinate and grow sprouted broccoli seeds - just rinse your seeds daily and in 7 days you will have one of the world's healthiest superfoods known to mankind! Yum, sprouts! To…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Jednoduchá miska na klíčení například ředkviček - nádoba, sítko a víčko na zakrytí dokud nejsou vidět první klíčky. Nádobu na vodu doporučuji vytisknout alespoň 3 perimetry, zbytek je na vás. A simple bowl for sprouting, for example,…
Print approx. €3.56–€4.36 excl. taxPreliminary estimate for one variant
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant
Seahorses are truly magical creatures! They pair bond for life, check in with each other every morning just to see if each is okay, and they dance - you can see videos of them on Youtube, it's marvelous. Eating sprouts regularly is very…
Print approx. €6.31–€7.71 excl. taxPreliminary estimate for one variant
A simple parameterized module with deflecting arms to suspend a sweet potato over a jar.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This is a resizable vented shade cover - all done in the slicer. Want a shorter wall? Want different X and y dimension? Just turn off scaling and resize it. The flutes make the walls print straight, and the holes in the bottom are all set…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Z axis belt covers from TeamFDM. I love Akio's belt covers, as the access underneath lets me route my webcam cable under the covers, but they are too tall to fit under the Z axis linear bearings. My remix version…
A simple hook that can be screwed into your desk to help manage cables. I liked the shape of https://www.printables.com/model/217285-under-desk-cable-management-hook, but that one is a little chonky and way, way larger than I needed. This…
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Thias is a more stable / durable Remix of Brad Bakers very useful original design: https://www.printables.com/model/1244644-kobra-3-max-poop-chutedeflector/files So this remix also needs a bit longer M3 screws. PETG is recomended instead…
Why I made this I made this controller + headset holder for a friend (that's why I don't have a picture). he wanted something like the holder from "3l3m3nt"(I can't find him at thingiverse anymore. he probably deleted that design). But…
Français : J'ai créé cette totoche (jargon de scoutisme - corne de brume) pour permettre à chacun de faire la sienne soi-même, et pour avoir un style différent de la corne d'animal. Elle produit un son similaire aux modèles standards en…
Sylvester the cat pouting Another Sylvester artwork: https://www.printables.com/model/320112-sylvester-the-cat Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
BOM: Printed with ROSA3D High Speed PLA Dark Blue Scaling up our popular cable and tube clips! This heavy-duty set of snap-fit pipe brackets is designed for much larger routing tasks. They perfectly accommodate standard PVC plumbing,…
Built in Onshape: https://cad.onshape.com/documents/0a23a3bafdbb1c9219c1536b/w/f8af3cbc7d856e8ea7dc0534/e/3c7af306953b55b3ec0ba495?renderMode=0&uiState=63448cb62e6ab355012f1c2e The parts: A “loose clip” - Useful for extra-large cables or…
A two-piece lid for wide mouth mason jars to be used for sprouting seeds. If you are new to sprouting, there are plenty of instructional videos on YouTube . They are extremely easy and fast to grow yourself. I have found that these lids…
These jigs are for routing your own MFT table with benchdog holes of size 20mm. The first jig is used to establish a corner. The CC distance to the first holes from the corner is 70mm which is equal to the MFT/3. You will only need to use…
This is a simple print for sprouting lids on a mason jar. I have included wide mouth and standard mouth lids. To print these successfully you have to set the top and bottom layers to zero. I have included the gcodes for PETG. I choose 40%…
Print your own new World Scouting logo woggle. No supports, color change for last 5 layers (0,2mm layer).
Great for polishing 3d print with brass/copper/bronze and other metal-filled filaments (and rocks of course !) Remix from : https://www.thingiverse.com/thing:2744886 Almost fully redraw with the aim to make the structure with a CNC router…
Parts: Water reservoir Sprouting tray Weighing plate Lid Divider I'd recommend to use PETG for at least the reservoir to make it watertight. For slicing the sprouting tray you have to use PrusaSlicer, because the grid at the bottom is…
This is just a plate which can be fitted to the original clamp and used with your VKB devices. Tested on NXT Gladiator with and without Omni stick. The plate has groves of 1.5mm which you can use to attach to the clamp using few cable…
needed something to keep the wires in the corner. and stop them from wiggling between desk and wall. needs 2 x m4 w/nut 1 x m3 w/nut
I wanted to use Akio's excellent mod of Z-belt covers for Voron v2 to route the USB cable from the webcam, but I discovered that due to increased thickness of the cover it didn't fit under my Z-rail, which was positioned, in accordance to…
This is my design of a cable organizer or cable routing hook. It should provide enough space for many power cords and/or network cables. You will find object files for a wide range of heights and depths. Orientation-wise it is made to be…
Finally printed the BentoBox recirculating airfilter and made some changes to it and some nice cable management inside the P1S for 12V. I use the filter mainly when printing ABS/ASA to avoid VOCs and that nasty white deposit that…
Refer to origin of this remix: https://github.com/tanaes/whopping_Voron_mods/tree/main/Z_belt_cable_cover The difference is that this version fits narrower 2020 extrusion T-slots (original didn't fit mine - they were intended for a bit…
Since the WECK is a traditional German company that sells its products mainly in German-speaking countries, I hope you don't mind that the following instructions are written in German. Da die üblicherweise für die Sprossenzucht…
Fits most of european jars usually used for pickles or honey. The smaller one is from Lidl. Can fit a little tight and on some jars - doesn't follow the thread exactly, but it pops right on and do it's job. :-) Printed out in PET. It has…
I wanted a spacer between the spool holder and printer for my Bambu Lab X1 Carbon as their stock configuration makes things a bit tight. I found a model for that but also noticed a model for routing the PTFE tube from the AMS hub. I…
Sprouting Jar Lid TWIST 82 Category: Kitchen & Dining
My wife asked me to find a print her a new woggle. I couldn't find her one so made it myself in Fusion and I think it's good enough to share with you lovely internet people. It's my first design I'm happy enough with to share with the…
Available for purchase on my Etsy store. Hook tool for gathering shift and brake housings when dealing with Trek's Control Freak internal cable routing. Very likely useful on other brands' internal routing as well. Push all the housing…
Here are some models for making a work surface compatible with the Festool MFT. No support needed when printing. What you need: Copying ring D27mm Groove cutter D15mm There are 3 models: Corner jig Jig Use lever clamps like Festool FS-HZ…
A simple Wall Hole Starlink Cable Routing Grommet I created. Very useful to install UTP cables through the wall. Available in two versions, one for 20mm hole and the other for 18mm hole. You need to print it with a flexible material, 3 or…
Inspired by the Traxxas CLIPLESS BODY MOUNTING on the Rustler VXL, I've made this one for the e-revo VXL 1/16. I used two screws M3x0.5 6mm (recycled on a old revo 3.3, sold with this part TRX5228) Works perfectly
Voron v2.4R2 Z Belt Cover with wire routing. A multi color remix of Akio's version.
A little push Block 22mm large the photo was an early print and this prototype was a little small, so I modified it for you guys with big hands Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 200…
Used TPU so solve the problem of not enough grommets that came with a new frame. This could potentially work for other frames if it is scaled up or down in the slicer.
I printed this model using a .08 tip sliced with cura and it uses approximately 140g, run time about 6 hrs. It is designed to hold the drip water after rinsing the seeds so placing it anywhere in the kitchen will not cause a mess. Holds 1…
I saw an advertisement for a fancy box to put green onions in to sprouting them. It was a neat idea, but WAY too big for my needs. It also cost enough to make the return on investment about 25 years. This is an easy print, but the inside…
One Brake line routing for the bottom and one for the top fork.
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
10.16.25 Strengthened the hinge connector in v2. ***** This is a USB cable mount designed to fit on the cable chain to route the beacon's USB cable along the side or top. I designed it with hinges for after the Beacon install so you don't…
A simple stand to hold a quart size mason jar inverted for seed sprouting. Update: v2 version added I updated the design to make it support-free and more stable. Slightly improved profile. Hardware: I used these stainless steel mesh lids…
This is a routing base/shroud for the Parkside PFBS 12 B4 rotary tool. For the print I used variable layer height - around 0.2 mm for the lower parts, 0.1 mm for the threaded part. I also blocked supports for the thread area. The router…
Woggles for Beavers troop while they were waiting on new supply of woggles to come in. 2mm inner brim added to add stability.
Hi, Finally something I can contribute! Maybe someone recognises the following situation: You want to play you favorite PS5 but the TV is occupied by our significant other. Luckily you have a nice PC monitor on an arm that you can hookup…
If you are installing a dropper post with internal cable routing on your Scott Genius 740 bike you'll need this cover. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: eSun…
Several compact variations on simple cable routing hooks. Can be installed on walls, desks, and workspaces. The hooks can be installed using a single (Self-Tapping) M2 screw (6-8mm length recommended). If you need a slightly larger hook,…
Simple template for routing cavities for humbucker pickups in a guitar body. Print with extra sidewalls to reinforce the area where the bearing will set against.
Pickup cavity routing templates for various type of pickup. Check the dimensions work with your pickups. I tend to use a Ø3/8 Router bit for cavities. Use your favourite method to attach the template, I currently prefer double sided PVC…
I did a similar design for my Xiaomi watch s1. A customer asked for the exact same design for his Apple Watch. You can insert your wrist band on the bottom and route the cable along the back of the stand. you could go with small support…
This a routing template for the 3 top routes required for a Floyd Rose Tremolo. There is a holder and 3 inserts. Printed in PLA with extra walls for strength. Align the holder and mount on the top of the guitar body that you want to route…
This is a PTFE tube router for the MK3 / S / + and MK4, that allows you to use a dry box or a separate spool holder on your desk. It spits out the filament pretty much where it would come out of a spool mounted on the stock filament…
Water spouting frog : https://drive.google.com/file/d/1EwWdHxvZjmnDGIcFG_wjHauetFlx5DhG/view?usp=sharing powered by a solar pump. (only at full sunlight) The frog is attached to the swimmingplatform at the edge of the pool. Print…
A 3-part snapfit sprouting jar stand that holds the sprout jar at an optimal 30° angle. Lightweight and Ideal for proper drainage of sprouts. Easy to clean.
Slot Routing Jig for Makita Router
Design is print in place and is working with all lenghts of översidan
This is a simple modification to the original model that introduces some feet that come off the face of the jar lid. I would recommend using supports PLA worked fine for me but the original author recommend PETG I have included three…
The Happy Cable Ender 3 electronics Case This case is the result of me being too picky about the internal cable routing in the ender 3 electronics case. As a result of having organised cables, it allows for amazing airflow, so that the…
If your X + hotend cable flows pretty well and you don't see a need for a cable chain, but just need the cable to route downward instead of outward to save on space or prevent interference, you can use this clip. Tested on Neptune 4 Plus.…
This remix simply builds upon the modifications made by Daniel Falkowski to add a cable routing channel for the relocated Y Endstop to have a neater appearance while retaining all of the other features of the PG7 + Spring Steel Voron…
Print List: Planter_Base ---------------------Print: 1 Planter_Cells ---------------------Print: 1 Planter_Roof ---------------------Print: 1 Planter_Wall '---------------------Print: 4 Planter_Clip_Vertical '-----------Print: 8…
EDIT: A note to say I've been using this extensively instead of the included bases and I'm routing basically dust free with much better stability. Tape over the round dust port milwuakee provides to improve the dust extraction. For any…
A minimalist tablet stand with an integrated shelf to put your stylus. It is designed for everyday desk use and media viewing. The angled design provides good stability while keeping a clean and simple look. The model is optimized for…
I didn’t print this myself yet, but while installing the original part I came up with a few improvement ideas. Update (11-02-2026): Uploaded Revision 2 added few radious to improve rigidity added .stl version since the step version had…
After some trial and error I found that the Hidden cable routing z belt cover mod by Aiko worked the best for me of the Z belt covers available. However, there were a couple things I decided to tweak. Same as Aiko there are A and B…
A replacement for the original grommet that protect the break and shifter hoses from wear when routing it through the bike frame. When I rebuilt my bike I couldn't find the original parts anywhere for purchase, so I decided to design my…
Draining holder for 2 sprouting jars. Holds 2-80mm dia jars. Maximum dimension of the print is 200mm, but it could easily be scaled up for larger jars if your printer supports it (mine doesn't). Enjoy!
Created ends (Black ASA) to tidy up hardware purchased speed bump/cable protectors that we use as physical marker to fit car just inside of garage so that door can close. Bolt Heads 17mm diameter max Bolt Hole 8.2mm Diameter Created model…
Printed in PETG at 30% infill. Supports required for one half - organic supports worked well and removed easily. May need to drill out bottom holes to make slightly larger, though have since modified the design to add some more space.…
I don't like the original cable routing on the model by IBI because the cables can move and break on the connector after some time, so I made this. This part has three functions: Make the connection between base plate and V2S more rigid…
Print without supports It helps immensely to remove the bars in front of the fans for better air flow. See photos.
I needed some rounded corners for a furniture project, so I quickly designed these to use with a handheld router and a flush trim bit. Provided are the sizes 25, 50, 75 mm, others could be customized (if you have solidworks). The models…
Remix with a wire routing port for stepper motor wire.
I've been using this simple cable clip for a while and it's served me well. I use some doublestick tape to hold it down on my desk and it can comfortably hold most small cables like phone chargers, mouse wires, and other things. You can…
Cable routing on the extruder side of the a1 and a1 mini. Prevents the cable from kinking. layer height = 0,15 / nozzle = 0,4 / without supporting structures
Heart shaped routing templates to fit the routing frame I made previously. ( https://www.thingiverse.com/thing:3513531 ) PLA is fine to use if you only plan on using the templates a few times. If however, you plan on using a template…
Like most of my lightboxes it has a short top and tall bottom. This allows for less waist if you get those pesky whisp or random issue. I have also included 2 ways to load the files. STLs The STL's do not include Wall hanging hole or…
Just some quick and dirty CNC work holding clamps for M5 waste-boards. This thing contains the files to 3D Print (stl), Laser Cut (dxf) or CNC Router (f3d/stp) (out of aluminium) this file. It has been tested with all 3 and my best…
With the original Prusa Lack Enclosure working well, I wanted to route my filaments similarly to how they were setup with the MMU2S previously, but now with an internal RMU MK3 buffer and an upgraded MMU3 with less friction. The…
Print with TPU
I needed a dust extraction solution for routing edge profiles. This dust extractor for the Bosch POF 1400 ACE makes use of the mounting points for the fence. Two 8mm rods of ~250mm are press fit in the holes. Good friction fit on Festool…
I created this drilling jig to accurately drill holes, and rout out the outline in a hardwood board to make a 29 shape 121-hole cribbage gameboard. The drill holes are sized for a ¼" bit and are chamfered to more easily locate the drill…
Basic mounting plate to allow the Ethernet cable for a Reolink PoE doorbell to come from the bottom instead of directly behind it. It fits in the existing mounting holes and is not very noticeable in use. I don’t think the model is…
BOM: Printed with ROSA3D High Speed PLA Dark Blue Taking our snap-fit design to the absolute maximum! This "mega" set of pipe brackets is specifically engineered for massive routing tasks in your workshop, garage, or basement. They are…
This will fit snugly into a hole drilled with a ¾" spade bit with a bit of overlap you can use to glue/add a grommet for a good seal. The hole is designed for the Starlink dishy→router cable and works nicely for those of us who didn't…
A Cap that locks into the bushing holder of the Bosch POF 1400 ACE. It helps with dust extraction when edge routing
I got a 3D printer last week and decided today to make my first 3d printable model. It is the back mounting plate with and without screw holes (it might be hard to print the tighter part of the screw holes so second version can be…
[ENG] Hi everyone, Thanks to @MoreSideways, I got into drifting in Assetto Corsa. Unfortunately, the narrow desk surface combined with its slippery finish makes it so that the steering wheel can shift during more intense movements, even…
Replacement feet for the AMS to allow for LED wire passthrough for minimal AMS height increase. My setup does not have the space for the LED bracket mods I have seen others make so this is my tidy solution. Printed in Bambu Lab TPU 95A…
Mason jar sprouting lid and ring printed in 2 parts, you'll need to make a pause to insert lid and continue printing. no support needed. I print it in PETG at 20-30 mm/s
I cuted the XBOX 360 controller clip away so it is easier to take the controller. Print Settings Printer Brand: Creality Printer: Ender 5 plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: Janbex PLA Blac
I had 1 out of 2 of these for a Trek Soho I was building up. I'm not even sure you can buy these through Trek, QBP, etc. If you could, they would cost more than they're worth. Just print your own. For bikes with internally routed brake…
Printed in PLA with extra walls dor added strength where the router bearing will ride.
No guarantee this will work, use proper safety gear. Thanks for the original model @MichaelOlson
