Search results: ovo

Sort order

3,597 models

P
PrintablesFredslund

Dock Holder - Lenovo ThinkPad

Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…

Print approx. €18.96–€23.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
454
Likes
61
Rating
4.67
P
PrintablesJ.K.

Sovol SV08 Enclouser - Führung für obere Glasplatte / Guide for upper glass plate

Führung für obere Glasplatte des Sovol SV08 Enclousers. Mit diesen Keilen kann die obere Glasplatte des Enclousers, wie eine Schublade vor und zurück bewegt werden. Mich hat das Einkeilen der Türen immer ziemlich genervt. Guide for the…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
14
Rating
5
P
PrintablesMart80

Lenovo Power supply holder

A simple laptop power supply holder for the table top. The holder is attached to the tabletop with a max. 25mm screw. Suitable for Lenovo's laptop.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
6
Rating
0
P
PrintablesHaltmar

Stohovatelná sušička ovoce na radiátor

Plat můžete dát na sebe kolik chcete... Základní plato se skládá ze dovou částí zastunutých do sebe. Print instructions nejlépe z PET

Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
1
Rating
0
P
Printableskubamxbot

Huawei - dokovací stanice pro bezdrátovou nabíječku Wireless Charging to the Huawei P30

Držák pro přesné uchycení telefonu pro bezdrátové nabíjení Huawei.

Print approx. €0.85–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
1
Rating
0
P
PrintablesAnas Bedda

CONNETTORE DEFINITOVO

Questo connettore può essere utilizzato in diverse maniere, ad esempio per creare una serra o un growbox ecc…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
6
Rating
0
P
PrintablesDan

Pákový povolovač na sud, víčko, uzávěr

Praktická páka na otevírání sudových uzávěrů je neocenitelným pomocníkem při manipulaci s plastovými i kovovými sudy. Ergonomický design a robustní konstrukce zajišťují snadné a bezpečné použití, čímž šetří čas i námahu. Ideální pro…

Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
Printablesrogerquin

Cable Chain ( SPINE ) for SOVOL SV06 3d printer extruder cable

This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…

Downloads
7,060
Likes
1,434
Rating
4.86
P
PrintablesTim

Lenovo ThinkCentre Tiny 10" Rack Mount - now with optional Keystone Sockets (M720q, M920q, P330, etc.)

I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…

Downloads
6,031
Likes
467
Rating
4.97
P
Printablesrogerquin

Heatbed Cable Support for SOVOL SV06 / SV06+ 3d printer

This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…

Downloads
5,591
Likes
567
Rating
4.94

The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Downloads
3,737
Likes
378
Rating
4.9
P
Printablesbassamanator

Sovol SV06/Plus/ACE Extrusion Seal

SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…

Downloads
3,704
Likes
448
Rating
4.82
P
Printablesbraga3dprint

Sovol SV06 Strain Relief

If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…

Downloads
3,222
Likes
300
Rating
4.91
P
Printablesmak77

MAK PrusaSlicer Preset for Sovol SV06 / SV06 Plus

PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…

Downloads
3,009
Likes
175
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 Panels for the Enclosure

Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…

Downloads
2,616
Likes
213
Rating
3.75

Sovol SV06 / Plus Extruder Colling Fan 5015

Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…

Downloads
2,566
Likes
336
Rating
4.82
P
PrintablesRappetor

Sovol SV08 - BTT Eddy Mount

What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…

Downloads
2,553
Likes
236
Rating
4.95
P
PrintablesNadir @ CN3D

Sovol SV08 Top Hat

WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…

Downloads
2,453
Likes
344
Rating
4.85
P
Printablesrogerquin

LCD Display Back Cover for SOVOL SV06 3d printer

This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…

Downloads
2,435
Likes
267
Rating
4.96
P
Printableskampfwuffi

Sovol SV08 - Optimized Macro.cfg & printer.cfg / Orca G-Code & Settings (Github now)

Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…

Downloads
2,212
Likes
190
Rating
4.83
P
Printablesbulbasaur0

Sovol SV06 Plus Heat Bed Cable Support Bundle for tight spaces (now V2!)

Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…

Downloads
2,179
Likes
238
Rating
4.94
P
PrintablesNadir @ CN3D

Xenomorph Toolhead for Sovol SV08

27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…

Downloads
2,151
Likes
327
Rating
5
P
PrintablesLukasz M

Lenovo legion go adapter

Adapter for lenovo legion go connect

Downloads
2,099
Likes
127
Rating
4.25
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Downloads
1,995
Likes
158
Rating
4.92
P
Printablesbraga3dprint

Sovol SV06 / SV06 Plus Extruder Visualizer / Motor Knob

Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…

Downloads
1,963
Likes
325
Rating
4.96
P
PrintablesSpb2005

Sovol SV06 bed alliner

Helps you to put on your bed correctly

Downloads
1,945
Likes
267
Rating
5
P
PrintablesStougaard print

Lenovo tiny 10 inch rack mount

I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front

Downloads
1,837
Likes
182
Rating
5
P
PrintablesJoshii_H

SOVOL SV07 PLA print profile (PrusaSlicer)

You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…

Downloads
1,817
Likes
54
Rating
5
P
PrintablesAllTheHobbies

Sovol SV06 Tool Storage

Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…

Downloads
1,799
Likes
207
Rating
4.52
P
PrintablesAllTheHobbies

Sovol SV06 Filament Guide

Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.

Downloads
1,756
Likes
188
Rating
4.88
P
PrintablesFreshPrints

Bambu Lab Anti-Vibration Feet for All 3D Printers FDM 2020 4040 frame, Anycubic Prusa Sovol Elegoo Voron Creality

These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…

Downloads
1,699
Likes
407
Rating
4.93
P
PrintablesRonanWarrior

Wall Mount for Lenovo M11 Tablet (2024)

Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…

Downloads
1,693
Likes
70
Rating
5
P
Printablesrogerquin

GT2 Belt Mounted Y-Stop for SOVOL SV06 3d printer

This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…

Downloads
1,678
Likes
234
Rating
5
P
Printablesbassamanator

Sovol SV06/Plus Frame Mounting Solution 2040 Extrusions

Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…

Downloads
1,642
Likes
212
Rating
4.91
P

Lenovo Tiny Fan Shroud

I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…

Downloads
1,616
Likes
171
Rating
4.83
P
PrintablesNadir @ CN3D

Sovol SV08 Cable Chain V2

I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…

Downloads
1,542
Likes
195
Rating
4.71
P
Printablesitsrouteburn

Sovol SV06 Plus Print Head Cable Support

A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…

Downloads
1,500
Likes
151
Rating
4.92
P
PrintablesRobs

Lenovo Legion 5 Gen 6 Laptop Stand support Mount

A stand for the Lenovo Legion 5 laptop that allows you to close the lid

Downloads
1,481
Likes
94
Rating
4.86
P
Printablesrogerquin

Cable Strain Relief for SOVOL SV06 3d printer

A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…

Downloads
1,475
Likes
173
Rating
4.89
P
PrintablesSam Schultz

Sovol SV08 Orca Tuned Profile

####The orca profile here is fine but the klipper config is not only old but has issues in it. I would love to post an updated klipper config that works on .13 klipper but I have moved to mainline, incorporated eddy-ng, and some other…

Downloads
1,466
Likes
64
Rating
0
P
PrintablesNadir @ CN3D

Sovol SV08 Hinge and door handle

Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…

Downloads
1,462
Likes
167
Rating
4.73
P
PrintablesJapple

Sovol SV06 PSU Fan Silencer

If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…

Downloads
1,437
Likes
218
Rating
4.68
P
Printablesrogerquin

Raised Cable Strain Relief for SOVOL SV06 3d printer

This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…

Downloads
1,381
Likes
166
Rating
4.91
P
Printablesmightyohm

Under-Shelf Mount for Lenovo ThinkCentre/ThinkStation Tiny PC

I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…

Downloads
1,337
Likes
101
Rating
5
P
Printables3DprintMyLife

Sovol SV08 Enclousure

I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…

Downloads
1,320
Likes
281
Rating
5
P
PrintablesAvel

Sovol SV06 5015 Blower Fan Duct

I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)

Downloads
1,289
Likes
155
Rating
4.46
P
PrintablesLtChipotle

Lenovo Legion Go custom backplate + .step source files

Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…

Downloads
1,257
Likes
77
Rating
5
P
PrintablesHawker

Lenovo Tiny M720q Top Vented Cover

The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…

Downloads
1,221
Likes
72
Rating
0
P
PrintablesTonyB

Silicone Tube Leveling Jig for Sovol SV06 Heatbed

This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…

Downloads
1,211
Likes
110
Rating
4.96
P
PrintablesNadir @ CN3D

Sovol SV08 Belt Helper for X Carriage

I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…

Downloads
1,206
Likes
220
Rating
5
P
Printables3DprintMyLife

Sovol SV06 Camholder

You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…

Downloads
1,206
Likes
185
Rating
4.85
P
PrintablesDeuce

Sovol SV08 Taco Bed Fix

My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…

Downloads
1,205
Likes
224
Rating
4.92
P
Printablesub3rmario

Sovol SV06 Minimal Filament Guide

Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…

Downloads
1,188
Likes
156
Rating
4.96
P
Printablesyor42

Lenovo Legion GO Protective case

A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…

Downloads
1,181
Likes
83
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 Exhaust Filter

This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…

Downloads
1,176
Likes
196
Rating
4.83
P
PrintablesUncleSash

Sovol 3D - DUAL Filmanet Dry Box Stand Off

Due to the Heatplate in my DUAL Filament Dryer from Sovol 3D, I made a StandOff for the DryBox. The StandOff has a 20 mm height, to make sure that the Dryer has enough clearance for ventilation. Share your make, that makes me more happy…

Downloads
1,173
Likes
150
Rating
5

Sovol SV06 PLUS Better Fan Duct

No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…

Downloads
1,157
Likes
100
Rating
4.8
P
Printablesowlish

10 Inch Rack Mount for Lenovo Thinkcentre m920q (m720q) Tiny

I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…

Downloads
1,153
Likes
116
Rating
5
P
PrintablesTom

Sovol SV08 drag chain system

This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…

Downloads
1,149
Likes
144
Rating
4.74
P
PrintablesMorgan.T

Sovol Filament Dryer SH01 and similar dryer extension feet

Description : Sovol dryer is perfect but the underside gets very hot. This holder protect the support and help to dissipate heat. re-use original pads hold in place without glue Version : V1 (deprecated): - Perfect for my dryer V2 : - Add…

Downloads
1,109
Likes
157
Rating
4.92
P
Printablesrogerquin

Spool Holder for SOVOL SV06 3d printer

A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…

Downloads
1,105
Likes
161
Rating
4.8
P
PrintablesMixmeister

Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch rack mount

This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…

Downloads
1,097
Likes
100
Rating
4.8
P
PrintablesRoboMagus

Lenovo Legion 5 Pro Riser Feet

These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…

Downloads
1,091
Likes
88
Rating
4.92
P
Printablesrogerquin

HD Filament Guide for SOVOL SV06 3d printer

This is a very easy-to-print, very easy-to-install filament guide for the SOVOL SV06. No tools are required for installation. To install, temporarily remove the spool holder tube and slide the filament guide over the spool holder arm.…

Downloads
1,071
Likes
152
Rating
4.9

NexGen3D: Lenovo Legion Go (LeGo) CyberDeck Mod

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…

Downloads
1,050
Likes
128
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 5" BTT HDMI Display

Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…

Downloads
1,047
Likes
171
Rating
4.88
P
Printablesss1gohan13

Sovol SV08 Orca Profile - Gohan (w/ filament)

**************************************Update: 7/26/24****************************************** For the most recent changes and notices about my macro setups, see my github. New updates to my profile. Now filament is added to the start…

Downloads
1,019
Likes
48
Rating
0
P
PrintablesJustin Vallely

Sovol SV06 Backpack

The best places I’ve found to mount a Pi on the Sovol SV06 and SV06 Plus require drilling and tapping so I came up with this “backpack” concept to clip onto the controller housing. It lightly plays into PLA’s compliance to hold firm and…

Downloads
1,015
Likes
192
Rating
4.95
P
PrintablesNadir @ CN3D

Sovol SV08 Feet V4

One of the mods we are most proud of! this feet they are not just aesthetics they have multiple purpose obviously a fabulous look risers for better ventilation of the electronic part they have the role of protecting the large pulleys from…

Downloads
1,012
Likes
175
Rating
4.93
P
PrintablesAB Laser CO2

Profiles orca slicer Sovol sv08

I am sending a pre-configured sovol sv08 profiles file materials such as PLA, PLA-SILK, ABS, ASA, PETG you can mosify and experience improvements have fun profiles are in a zip file I added pla wood in the test version, set the speed as…

Downloads
1,004
Likes
66
Rating
0
P
PrintablesD1ngsbums

Lenovo ThinkCentre M Tiny stand

This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…

Downloads
986
Likes
68
Rating
5
P
Printables3DPrintDemon

SOVOL SV07 Extruder Ribbon Cable Support Extension

…Please be sure to hit like & post a make, I'd love to see your prints! Print on its flat EDGE as this will provide the strength you need in this orientation, that's important! Don't print too fast or you could pull it off the bed, use a…

Downloads
983
Likes
81
Rating
5
P
Printablesasd913

Lenovo Thinkcentre Tiny Stand

I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Downloads
982
Likes
100
Rating
5
P
PrintablesLoogle

Sovol SV01 Pro OS2 Fan Duct (with CFD)

Testing finished, released! Read Design/Testing section below if you're interested in the details. Checked in with Sovol and they confirmed this will also work with the SV05. I find 30-55% fan works well with PETG depending on nozzle temp…

Downloads
977
Likes
112
Rating
4.64
P
Printableskiwiprint

Sovol SV06 Buildplate texture and model for PrusaSlicer/Superslicer

This is just a simple texture and model combination for your Sovol SV06 presets in SuperSlicer or Prusaslicer. All I did was adjust the z position of the stl for the bed and quickly made a texture in Affinity Designer for the texture. It…

Downloads
963
Likes
98
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 cable chain

This is a slim version for having cable chain on the Sovol SV08 All the part are pre oriented in the best position. Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good…

Downloads
960
Likes
163
Rating
5
P
Printablesbassamanator

ADXL345 (standard and BTT) Mount for the Sovol SV06/Plus

UPDATE Added v2 (RECOMMENDED) Changelog Easier to tighten. Accommodates: Standard ADXL345. BTT ADXL345/S2DW (see this make ). 3 versions of the mount (see filenames for explanations). The bed spacer now plugs into the mount. BOM 4 x M3 x…

Downloads
948
Likes
120
Rating
5
P
PrintablesJLS

Sovol SV08 Side Mount Spool Holder - Remix

Print with 3 perimeters, 20% infill, use snug supports to the bolt holes. Use M4 bolts and nuts to attach everything together. This works perfectly with the SV08 Filament runout sensor holder from dmika7200 . EDIT: I completely…

Downloads
943
Likes
131
Rating
4.94
P
Printables_ _

Scissor mechanism for Lenovo laptop keyboard

Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…

Downloads
939
Likes
34
Rating
0
P
PrintablesRene

LENOVO ThinkCentre Wall and Under-Desk Mount

edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…

Downloads
915
Likes
62
Rating
4.5
P
PrintablesAnUnknownSource

Lenovo Tiny PC 2x 1U Server Rack Mount

Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…

Downloads
909
Likes
124
Rating
5

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Downloads
903
Likes
69
Rating
5
P
PrintablesFreshPrints
Downloads
898
Likes
157
Rating
5
P
PrintablesRobindk

PTFE Grommet for Sovol Filament dryer

I bought a Sovol filament dryer. It comes with plastic grommets, but you can't feed a PTFE tube through them. So I drew up a grommet, that fits a PTFE tube, so I can print directly from the box. I printed it using PLA and a 0.6 mm nozzle.…

Downloads
881
Likes
120
Rating
4.79
P
Printables3DRibo

The Nautilus - Sovol SV06 PLUS

The Nautilus design remixed to fit Sovol SV06 Plus taller hot end. This will work with stock or volcano nozzles. The model is quite rough and ready, not as refined as the original, but works absolutely fine and printer first try. when I…

Downloads
881
Likes
113
Rating
5
P
PrintablesHermann S

Lenovo Tiny 10 inch Rackmount with Keystone slots

Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…

Downloads
881
Likes
120
Rating
4.44
P
Printables3DPrintDemon

SOVOL SV08 Silicone Nozzle Cleaner & Purge Bucket Minus Load Cell brass brush option

…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…

Downloads
852
Likes
187
Rating
5
P
PrintablesITG Gear

3D Enclouser Case for Lenovo M90q gen1 ft. MSI RTX 3050 LP, 3.5in LCD Screen

Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…

Downloads
845
Likes
48
Rating
0
P
PrintablesDavid Fish

Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening

Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…

Downloads
836
Likes
73
Rating
4.5
P
Printableslollo99

Cable Strain Relief for SOVOL SV06 Curve

Remix of the cable relief if you have your printer next to a wall 0.2 layer or 0.15 i used PETG for better heat resistance Supports on plate only Remix of Cable Strain Relief for SOVOL SV06 3d printer da rogerquin

Downloads
836
Likes
93
Rating
4.5
P
Printablesrogerquin

Back mounted cooling fan duct for SOVOL SV06 3d printer with 4010 blower fan

***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…

Downloads
835
Likes
128
Rating
4.71
P
PrintablesTeknikFrik

Sovol SV08 Camera Angle Bracket

Adjusts angle of the built-in camera so it points down more (centered a bit below the nozzle). I recommend using Arachne wall generator to handle the very thin loop. Category: 3D Printer Parts

Downloads
829
Likes
171
Rating
5
P
PrintablesOverthinker42

Sovol SV06 PLUS Better Fan Duct Remix

Improved dimensions. See Sergiienko Valentyns original for more details. If you use Polymaker PolyMide CoPA like me: Printing it all in one piece with supports is an option, but the supports are a struggle to remove as is default with…

Downloads
827
Likes
80
Rating
4.88
P
PrintablesMyTechFun

Fixing Sovol SV06 Plus bed cable problem

Sovol SV06 Plus is a great printer, but its bed heating cables are not fixed resulting a safety issue. With this solution first 20mm will be fixed. Don't forget to print it from ABS or other hi-temp material. Installation requires 10…

Downloads
819
Likes
137
Rating
4.64
P
PrintablesMaxim7745

Nozzle Z Offset Search - Sovol SV06 Version

Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…

Downloads
818
Likes
78
Rating
5
P
Printables3DPO

Remix of stephzic's Sovol SV08 Bambu Lab Nozzle Adapter with Heat Inserts

I printed this in ABS with 4 walls and 40% gyroid infill Required: 4 x M3 x H4 Heat Inserts, 4 x M3 x 20 Bolts

Downloads
810
Likes
89
Rating
5
P
Printablesvrsn3ptoh

Lenovo Thinkcentre M920 10 Inch Rack Mount

Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…

Downloads
807
Likes
114
Rating
5

The Amonite - Sovol SV06 Fan Duct Dual 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Downloads
803
Likes
112
Rating
5
P
PrintablesITG Gear

Ventilation size panel for Lenovo M910s/M920s, M720s, M710s

Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…

Downloads
800
Likes
40
Rating
0

Sovol SV06 / Plus Bowden Tube Mount

Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler

Downloads
797
Likes
134
Rating
5