Search results: panels

Sort order

887 models

P
PrintablesWidgets

Sound Diffusion Panels (Square and Hexagon)

3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…

Downloads
9,794
Likes
4,412
Rating
4.9

▚ Cube Background Panels for Photography

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+

Downloads
3,042
Likes
1,912
Rating
4.88
P
PrintablesMetikumi

Winter Lantern with Interchangeable Color Panels

Get ready for winter with this stunning lantern, designed to brighten up any space with a warm, festive glow. With a modular design, this lantern can be printed in a variety of colors, allowing you to create a unique look. Each part is…

Downloads
523
Likes
238
Rating
5
P
PrintablesCD PROJEKT RED

Cyberpunk 2077 — Rogue’s Reactive Armor Panels

Where the hell is he, for f***’s sake? Arrogant, self-centered son of a bitch can’t keep his yap shut. Probably tellin’ the whole damn crowd what we’re about to pull. Better hope no corpo rats’re listenin’ in. I swear he’d better not f***…

Downloads
216
Likes
94
Rating
5
P
PrintablesFredslund

Wire Cover for Acoustic Panels

The model is made with a slid in one end where a wire can pass through, the slit is 6mm wide. i have printed the cover in black matt PLA and have added fuzzy skin to make it blend in better. To fit the cover in length it can easily be…

Downloads
216
Likes
35
Rating
0
P
PrintablesBrettcnc

Tanfoglio LIMITED CUSTOM Pistol Grips Panels. Ukraine Coat of Arms

Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.

Downloads
210
Likes
21
Rating
0
P
PrintablesDarkfin

Cubicle Shelf for fabric wall panels

Found this file on Thingiverse, it is https://www.thingiverse.com/thing:824839 . It suggested some cubicle hooks to get the pins from that were no longer available, so I modified the object to use these pins,…

Downloads
133
Likes
40
Rating
5
P
PrintablesYvoluk

Snap-on side panels Xiegu x6100

Snap-on protective side panels for QRP Ham radio Xiegu x6100. Very accurate model. No supports needed. You just need to slightly abrade surface of the holes and pins where is meets the hole. Then push the 8 pins into the holes, no need to…

Downloads
129
Likes
10
Rating
4
P
PrintablesAlexeyvik

Conductor for 18mm panels remix by voltNik

Conductor for 18mm panels remix by voltNik Ремикс кондуктора от voltNik'a для панелей 18 Remix from https://www.thingiverse.com/thing:5228089

Downloads
97
Likes
24
Rating
5
P
PrintablesAA

Qidi Tech i-​Mate S - Side Panels - Seitenpanele

Qidi Tech i-​Mate S - Side Panels Simply glue 6x2 magnets in the holes and you're done. Have fun ! Qidi Tech i-​Mate S - Seitenpanele Einfach 6x2 Magnete in die dafür vorgesehenen Löcher kleben und fertig. Habt Spaß !

Downloads
90
Likes
6
Rating
0
P
PrintablesMetikumi

Anton Firsik's Forest-Themed Side Panels for the Modular Lantern

This is Anton Firsik's improved version of the forest-themed side panels for the modular lantern. I created various variants, from an easy two-colour to a complex five-colour print. The side panels can be printed on any 3D printer using…

Downloads
87
Likes
48
Rating
0
P
PrintablesMetikumi

Beautiful Side Panels with Illustrations by Anton Firsik

No Longer Supported This project has been replaced by: Anton Firsik's Forest-Themed Side Panels for the Modular Lantern The Modular Lantern Frame, Lid, Pole and Foundation - Low Poly Design Explore More from Meti·kumi Interested in my…

Downloads
81
Likes
41
Rating
0
P
PrintablesMetikumi

Valentine Themed Side Panels for Modular Lantern

This is a new side panel for my lantern design in a valentine’s theme. It is a straightforward print that looks great with one transparent filament but can also be printed with two or more colours if you like. Please note that only the…

Downloads
69
Likes
50
Rating
0
P
Printablesfusion3dart

Voronoi Mozart 16"x16" 3D Filament Art - 4 panels

Free model to try my products! Please follow and please like and post your makes! This helps my channel and Club grow! Download the instructions file to know which colours are best and when to change layers. Decorate your music room,…

Downloads
57
Likes
25
Rating
5
P
PrintablesJimleeQ

1x1 Gridfinity refined 2-ribbed bin with project_panels

So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…

Downloads
32
Likes
8
Rating
5
P
PrintablesMike

Vandy Vape Pulse X BF - V2 style panels

Vandy Vape Pulse X BF - V2 style panels cutout for 10mm x 1.5 - 2 mm magnets

Downloads
30
Likes
1
Rating
0
P
PrintablesOstseefoto

OSVAC Adapter für Dewalt Panelsäge

Diesen OSVAC-Adapter für meine Kappsäge Dewalt DWS773 habe ich mir gebaut. Er sollte auch an die DWS774 passen. Gedruckt mit PLA der Fa Geeetech. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Rohrbogen aus…

Downloads
11
Likes
1
Rating
0
P
PrintablesDan Rogers

Holiday Lamp Panels - Heart petal drifts

Decorative porch light inserts that arrange small hearts in a way that evokes a blustery day with cherry blossoms blowing in the wind. Note, each model in this listing is a different arrangement of the hearts - and together they give you…

Downloads
11
Likes
4
Rating
0
P
PrintablesSevro

Ring Lamp II with Halloween Panels

Overview This is my second version of the Ring Lamp. First version is available here: https://www.printables.com/model/929809-ring-lamp In the beginning I wanted to change only a base and add some new Halloween panels in the Ring Lamp but…

Downloads
3,967
Likes
1,394
Rating
4.94
P
PrintablesSevro

Christmas Panels for Ring Lamp

Overview This is my Christmas set of panels for my Ring Lamp It work with Ring Lamp II available below - there are files for lamp and instruction https://www.printables.com/model/1043648-ring-lamp-ii-with-halloween-panels The panels work…

Downloads
3,853
Likes
1,228
Rating
4.88
P
PrintablesRhys34512

PS5 (Original - not slim) Side Panels

These are side panel files for the original (not slim) DISK PS5 - Digital hopefully on their way soon, they require a large format printer to be printable, printers such as a CR-10 or likewise build volume (around 390mm high). This step…

Downloads
2,717
Likes
187
Rating
0
P
PrintablesNadir @ CN3D

Sovol SV08 Panels for the Enclosure

Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…

Downloads
2,616
Likes
213
Rating
3.75
P
PrintablesYardboy

Stacked HSW Wall Panels 2/4/6/8x211x248

These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…

Downloads
2,473
Likes
787
Rating
3
P
PrintablesFunkyArt

Hexagon LED Panels and Shelfs

You can see a great example of this HEX Panels on Engineericly 's YouTube Channel. I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and…

Downloads
2,046
Likes
790
Rating
4.57
P
Printables3D Printy

Printy Panels

3D Printed shelving system with snap together parts. https://youtu.be/xgLI_G_G63o https://youtu.be/Rua7R26Sotk https://youtu.be/c63ayOe9OTc Customization Basic Panels 1x1 (Use for test prints) 2x2 3x3 4x2 4x4 5x5 6x1 6x2 6x3 6x4 6x6 7x7…

Downloads
2,031
Likes
830
Rating
4.88
P
PrintablesMandicReally

REAL 3D Printed Sound Panels!

Hexagons maker everything better! Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping…

Downloads
1,908
Likes
1,327
Rating
4.5
P
PrintablesEusterics

Cube Background Panels (self assembling)

The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…

Downloads
1,760
Likes
1,339
Rating
4.75

Airbus A320 Korry style switch for 3mm panels

Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…

Downloads
1,710
Likes
53
Rating
0
P
PrintablesPrusa Research

Side Panels - Prusa CORE One

Make the Prusa CORE One your own! Our new printer is designed with modders in mind. Since we’re using proper metal almost everywhere, you can easily design all sorts of holders, organizers and shelves, and attach them using magnets to the…

Downloads
1,704
Likes
559
Rating
4.33

Kit for Removable Panels/Doors for Voron V2/Trident using Strong Snap Latch

Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…

Downloads
1,687
Likes
441
Rating
4.67
P
Printables3DVJ Models

Easy Connect Geometric Wall Panels

This model was made for those of you who do not want to buy those expensive wall panels. I decided to model these for a similar look and ease of use/installation. Measurements/Requirements: I modeled this to fit the Ender 3 3d printer.…

Downloads
1,539
Likes
308
Rating
5
P
Printablessduck

Eurorack Blank Panels

I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…

Downloads
1,440
Likes
172
Rating
4.9
P
PrintablesMichael M

K1 SE Enclosure side panels

If you have a Creality K1 SE printer and want to add an enclosure for ABS or ASA prints look no further. I used Henlor's CAD model as reference to the panel removed all chamfers to the bolt holes to satisfy Sendcutsend's website. Also,…

Downloads
1,392
Likes
94
Rating
5
P
Printablesvier2acht

Bambu Lab P1P closed side panels

Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit. Important Update: 23.01.2023. Printing these Files is complicated.…

Downloads
1,326
Likes
144
Rating
5
P
Printablessantiniki

Solar module drain clip for 30mm panels

Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…

Downloads
1,318
Likes
82
Rating
5

Prusa Enclosure Honeycomb Wall (Interlocking Panels)

The Honeycomb wall attaches to the side of the Prusa Enclosure, to provide attachment point for any of the HSW compatible tools. The sub panels lock together to create one continuous uninterrupted Honeycomb Wall. No need for…

Downloads
1,310
Likes
163
Rating
4.94
P
PrintablesDemigodofa

(10) Stacked Honeycomb panels quicker printing

I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.

Downloads
1,271
Likes
159
Rating
0
P
Printableshumebeam

Bambu Lab P1P - Fancy Corner Panels

Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…

Downloads
1,253
Likes
188
Rating
5
P
PrintablesRAF

CHAMELEON v3 - Modular Arcade Stick - Panels

Please check back periodically, as I will be regularly adding more panels! As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi ! - RAF = OnShape…

Downloads
1,208
Likes
108
Rating
5
P
PrintablesLumiArte

NORM - Hexagonal modular wall panels

NORM Hexagonal modular wall panels

Downloads
1,181
Likes
1,124
Rating
4.5
P
Printablespackley

Flashforge Adventurer 5m Enclosure Panels (Step Files for Laser Cutting)

I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…

Downloads
1,009
Likes
100
Rating
0
P
PrintablesLutraVulgaris

Acoustic Diffuser Panels with (or without) LED-lighting

Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…

Downloads
972
Likes
659
Rating
4.5
P
PrintablesNT

Japanese Garden Lantern with Swappable Panels

This is a Lantern with swappable panels inspired by the Japanese Garden theme. The panels can be swapped for many themes : Disney, Valentines Day, Christmas, Halloween, Easter, Thanksgiving, etc. Making this a year long ever changing…

Downloads
955
Likes
364
Rating
5
P
PrintablesBeamCase_Design

BeamCase SW - LOOP case panels

These are the LOOP style case panels for BeamCase sandwich and BeamCase SFF. Instead of multiple panels that are printed in a flat orientation, these are loops that are printed standing up, and come with two different vent patterns, slots…

Downloads
912
Likes
502
Rating
5
P
PrintablesOLEGator Screb

Creality K1SE/K1 SE enclosure panels with top cover

The names of all files include the number of parts needed !!!ATTENTION!!! LOW version fits all k1se, HIGH-only for printers with 4 m3 holes in the top of the frame. I cut out the panels from 3mm acrylic and printed other parts from PETG,…

Downloads
892
Likes
98
Rating
5
P
PrintablesMandicReally

Medium 3D Printed Sound Panels! - Bambu & Prusa Mk4 Version!

Hexagons maker everything better! Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping…

Downloads
880
Likes
471
Rating
5
P
PrintablesAlbeart3D

Modular Led Channels for Hexagon Panels + Geometry Wall Art Sleeves

Modular LED channels for hexagonal acoustic (or 3D printed) panels. The channels are designed to be printed with 0,4mm nozzle. Assembly material: Hexagonal Acoustic Panels 30cm x 26cm 3D printed Channels LED Strip: Minimum 60 LED/meter (…

Downloads
774
Likes
564
Rating
5
P
PrintablesBeamCase_Design

BeamCase ITX - Panels v3.2

These are case panels v3.2 to cover up your BeamCase and give it a unique look. The handles make it easy to carry and also act as feet and bumpers, though alternative case feet are avaliable. These are only the files for the outer panels,…

Downloads
754
Likes
398
Rating
5
P
PrintablesBlueShell3D

GameCube Replacement Rear IO Panels for GC Dual

Print standing up with lots of supports and ZERO infill. You can do it!!

Downloads
702
Likes
88
Rating
5
P
PrintablesCaptainAl

10" Rack - Half rack panels for network devices (incl. Unifi/Ubiquiti)

I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…

Downloads
701
Likes
67
Rating
5

Airbus A320 EFIS Panels

Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…

Downloads
681
Likes
43
Rating
0
P
PrintablesCooler Master

Panels clips replacement - MasterBox NR200 & MasterBox NR200P - Official

Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to print and modify the design for the clips that hold the paneling of our most beloved ITX enclosure(s)! Lost one? Your product is out of warranty?…

Downloads
653
Likes
68
Rating
5

Japanese Garden Lantern - Separated Panels Remix

This is a remix of Keenan's great lantern model. I separated the the cross hatch panels in order to get a cleaner print. Otherwise the model is the same. If you want the model with the socket, download the base from the original.

Downloads
642
Likes
288
Rating
5
P
Printables3D Printy

Printy Panels - Box Connectors

Box connectors for all standard square Printy Panel sizes (2-8 units). https://youtu.be/Rua7R26Sotk https://youtu.be/xgLI_G_G63o Customization All clips - Connector has clips for every available port. This is a good option for stronger…

Downloads
622
Likes
238
Rating
5

Skadis panels modular kit

Skadis pegboard modular kit My daughter wanted a Skadis pegboard like this for Christmas. So I assembled it and hung it on the wall. It looks great with the accessories! Then I thought of doing something similar so that the individual…

Downloads
614
Likes
382
Rating
5

Airbus A320 Flaps Panels

Reasonably dimensionally accurate flaps panel, designed to fit Skalarki size Pedestal. Panel size 148.5mm x 100mm. Solves the problem, how to engrave position legend on curved surface. 3 layer panel designed to be routed from 3mm cast…

Downloads
580
Likes
31
Rating
0
P
Printablesqpockets

Dotmod DotAIO V2 replacement panels

dropped and shattered one of the doors on the DotAIO, so i made some replacements. The button side door is pretty much a 1to1 replacement The tank side door has been modified with a bigger juice level viewing window and airflow cutout.…

Downloads
575
Likes
20
Rating
4.5

Airbus A320 Korry style switch for Skalarki Overhead panels

Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…

Downloads
574
Likes
23
Rating
0
P
PrintablesAsraff Amzani

Customisable 3D Printable Pegboard Panels

The previous one uses a lot of resources, such as thick flat panel at 5mm and then added mounting of half the side of picattiny rail, and print another rail coupler as well as you might be using more screws than you ever imagined. I…

Downloads
570
Likes
35
Rating
5
P
PrintablesCerberus

XT60E-F Socket Panels

This is a range of panels for presenting XT60E-F sockets. I designed them to present XT60 12V power sockets in a campervan. But I imagine they could be useful for any number of situations where presenting XT60 power sockets would be…

Downloads
539
Likes
71
Rating
5
P
PrintablesEIGA

FormD T1 Side Panels

As seen in my YouTube video: The Ultimate FormD T1 Air Cooled Build Panels require a large print bed (300mm+) and a well calibrated printer. They are somewhat experimental, trial and error may be necessary to get satisfactory results. The…

Downloads
533
Likes
45
Rating
5
P

Rat Rig V-Core 4 - Printable Parts & Enclosure Panels

V-Core 4 Kit: https://ratrig.com/3d-printers/v-core-4-category.html The most up-to-date documentation (BOMs, CAD files, Build & Commissioning Guide) can be found at: docs.ratrig.com This page provides the STL files for your V-Core 4…

Downloads
515
Likes
49
Rating
5
P
PrintablesMrKit

Corrugated Metal Roofing Panels – Multi-Scale and Multi-Size

This set includes a variety of corrugated metal roofing panels—the familiar wavy style commonly seen on barns, sheds, industrial buildings, and rural structures. Designed with scale modelers in mind, these panels are ideal for adding…

Downloads
508
Likes
36
Rating
5
P
PrintablesMM3D Workshop

Christmas Tealight Lantern with Swappable Light Panels

Description This is a lantern model with interchangeable side panels featuring various Christmas motifs. The lantern is made exclusively for LED tealights. Do not use regular tealights! The project is very simple and consists of the main…

Downloads
499
Likes
106
Rating
5
P
Printablesfreemanowe

No drill cabinet door and drawer handles for 18mm thick panels

Simple cabinet door and drawer handles with 2-sided tape mount for 18mm thick panels (3 size variations). Made for temporary use until I decide what will be the permanent “style” - although they are tougher than I initially thought. Only…

Downloads
465
Likes
79
Rating
5
P
PrintablesOrnotermes

10" rack blank and vented panels 1-4U

Panels for your 10" rack. Blank / solid, or ventend with hexagons or triangles. Designed 3mm thick, but you can rescale that in the slicer if you want something different. Made to fit my 10" 2020 rack. Category: Computer

Downloads
454
Likes
42
Rating
5
P
Printables3DPHUB.NET

Laser cut panels for Creality K1 Series

Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…

Downloads
443
Likes
69
Rating
3
P
PrintablesTs3D

Sound Diffusion Panels

Sound Diffusion Panels

Downloads
420
Likes
93
Rating
0
P
Printablestodbot

Cube of Rainbow Torment: LED Cube w/ cheap WS2812 / Neopixel panels

Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…

Downloads
402
Likes
114
Rating
5
P
Printables3D Printy

Printy Panels - Gridfinity Panels

Printy Panels compatible with Zack Freedman's Gridfinity system . https://youtu.be/Rua7R26Sotk https://youtu.be/xgLI_G_G63o https://youtu.be/ra_9zU-mnl8 Options Basic Panel - Uses minimal filament Weighted Panel - Squeezes in a few more…

Downloads
400
Likes
210
Rating
5
P
PrintablesAsraff Amzani

Braces for Modular Skadis Panels

These are braces for the modular skadis panels meant for https://www.prusaprinters.org/prints/19442-modular-skadis-panel These will be used to piece together the above panels to form a big wide panels according to your liking. You need to…

Downloads
383
Likes
88
Rating
5
P
PrintablesMichal Fanta

Simple Concealed Hinge for Folding Table Tops / Panels (Low-Profile)

This is a more straightforward sibling to my 180° Stealth Concealed Hinge I designed this version to be easier to print, easier to install, and very practical for things like folding table leaves , fold-out work surfaces , portable desks…

Downloads
380
Likes
270
Rating
5
P
Printablesjericho

Pegboard panels for Bambu P1P minimal shell enclosure

wanted to add pegboard side panel like the ones on Bambu's website. So i replicated the pegboard design onto the dxf cutout that the minimal shell had for the left side panel. I then imported it into the slicer and cut it so that i can…

Downloads
372
Likes
61
Rating
4
P
Printablesmattmega77

Cooler Master QUBE 500 - Print Your Own Panels

The original colors are cool, but what if you could print your own panels? I separated the panels out from the original STEP file and cut them into printable sizes. I also uploaded the original panel sizes if you have a large enough print…

Downloads
368
Likes
53
Rating
0
P
PrintablesAsraff Amzani

Pegboard Panels

I made this pegboard panels so that those who wanted to organize their house/office/table or anything but don't know or no place to source a pegboard, this can can be 3d printed instead. There are 3 panel sizes, 10, 15, 20cm and hole…

Downloads
366
Likes
64
Rating
5
P
PrintablesOutsider

VV Pulse v2 panels

přední a zadní kryt(panel) pro Squonk mod VV Pulse v2 materiál: Petg,Pla,Abs atd….. výplň minimálně 20% front and back cover (panel) for Squonk mod VV Pulse v2 material: Petg, Pla, Abs etc.… .. filling at least 20%

Downloads
365
Likes
17
Rating
0
P
Printables3D Printy

Printy Panels - Angled Panels

Printy Panels with an angled shape for bracing and corner shelves. https://youtu.be/c63ayOe9OTc https://youtu.be/xgLI_G_G63o Customization Corner Panels Double Panels Printing All parts can be printed without supports. Add a brim if…

Downloads
357
Likes
204
Rating
5
P
PrintablesMilan Paskaš

Cable entry on van roof for solar panels

Considering it is mounted under solar panels the part is protected from direct sunlight and UV. Otherwise I would recommend ABS or ASA. This width is suitable for Fiat Ducato, Citroen Jumper etc.

Downloads
354
Likes
29
Rating
0
P
Printablesmistic100

Hexagonal light panels

Update 18/10/2026: I added a new additional tile with IKEA Skadis compatible holes. This is a modular light panels system I designed during the past month, inspired by the LumiHex project by Smart Solutions for Home . Each tile is 18cm…

Downloads
349
Likes
241
Rating
0
P
PrintablesNix

Cube Background Panels for Photography -- Border Pieces

These are border pieces for the photo background panels by @TripleGWorkshop which allow for a gap-less box when creating a photography background using their panels. Set includes three varieties of edge-strips to avoid visual repetition…

Downloads
349
Likes
299
Rating
5
P
PrintablesKrenotenze

FlashForge Adventurer 5M Enclosure Sidepanels

Slice them up however you may need in order to print! It can be sliced in quarters and be printed on the 5M. They have plenty of spots that are thick enough to accommodate a peg. Magnet positions are also present. I do not remember what…

Downloads
346
Likes
56
Rating
0
P
Printablesthrutheframe

ARC-PEGLAGO panels for ARC and Spool bracket

Introduction A lot of thought has been put into the design for ARC . One of the considerations is that not everyone wants a fully enclosed P1P as they may only print PLA or PETG. But they still want vented side panels and a door to…

Downloads
336
Likes
110
Rating
5
P

Art Deco Triptych Wall Decor Panels

Three wall panels in the Art Deco style of the early twentieth century. Use individually or as a triptych. These panels are large, 400mm tall, because I think that size was needed to really do justice to the style. Different heights and…

Downloads
331
Likes
177
Rating
0
P
Printablesbeerman

Led Hexagonal Panels

I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them. I've have added…

Downloads
325
Likes
114
Rating
0
P
Printables3D Printy

Printy Panels - Wall Panels

Specialty panels for hanging Printy Panel shelves on a wall. https://youtu.be/Rua7R26Sotk https://youtu.be/xgLI_G_G63o Sizes 3x3 4x4 5x5 6x6 7x7 8x8 Printing All parts can be printed without supports. Add a brim if curling is an issue.…

Downloads
322
Likes
119
Rating
5
P
PrintablesDarkstar77

Voron Switchwire Deck Panels

This is a simple printable 2 part deck panel for the Voron Switchwire. I've added 3 additional mounting holes to better align the panels, and more rigidly mount them. The panel is split in 2 parts that just fit on the VSW build plate. I'm…

Downloads
316
Likes
54
Rating
5
P
Printablesikletti

Axial Capra body panels

Body panels for the Axial Capra. I designed them as two parts, so the inserts can be printed in a different color. You can even used two different colors for printing the insert to add more contrast :-) The hood is a two-piece design to…

Downloads
314
Likes
24
Rating
5
P
Printablesnk_synth

Eurorack textured blank panels (11, 17, 4 HP)

Textured blank panels for Eurorack cases. Tinker with different colors on the top layers for a fun multi-colored effect.

Downloads
314
Likes
43
Rating
5
P
PrintablesOcelotzlasu

Lost Vape Centaurus M100 replacement side panels

I decided to make some replacement panels for my Centaurus M100 to give it some character. I made a blank and some customized panels. Feel free to remix it with any design you want. The cutout with the design should be 0.4mm deep if it…

Downloads
313
Likes
16
Rating
0
P
PrintablesSevro

Easter Silhouette Panels

This is my Easter set of panels for my Ring Lamp It work with Ring Lamp II available below - there are files for lamp and instruction https://www.printables.com/model/1043648-ring-lamp-ii-with-halloween-panels The panels work also as…

Downloads
311
Likes
96
Rating
5
P
PrintablesPigeon

Pigeon Panel - Pulse AIO - Panels

Some panel doors to fit the Vandy Vape Pulse AIO mod. These Panels use the common 3x1mm magnets and need to be glued into the panel. I have included a 'Test Fit' STL file as I print in ABS. if you print in PLA or PETG please print the…

Downloads
311
Likes
17
Rating
5
P
PrintablesGinger Saw

JST SM Panel Mounts for 1.5-2mm panels

JST SM panel connectors for 1.5-2mm deep panels. Cutouts for 2-10 pins included.

Downloads
310
Likes
32
Rating
5

Texture Rolling Pin - Metal Crosshatch Panels

Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal with bands and rivets for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a…

Downloads
308
Likes
59
Rating
0
P
Printableshumebeam

Python - Ultimate Bambu Lab AMS - Side Panels (For Official Supporters)

Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Last update of serial numbers: May 29, 2026 Download the zip file here , right…

Downloads
304
Likes
47
Rating
5
P
PrintablesBasementLAB

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…

Downloads
302
Likes
98
Rating
0
P
PrintablesJack

Iflight Chimera 7 Side Panels

Iflight Chimera 7 Side Panels

Downloads
292
Likes
17
Rating
0
P
PrintablesPavel Jeníček

Vandy Vape Pulse AIO V2 Panels

Panely pro Vandy Vape Pulse AIO V2. díry jsou přizbůsobeny pro magnety o průměru 3mm a výšce 2mm. V modelu jsou díry s tolerancí 0,2mm. Magnety jsou poté zalepeny lepidlem. Na některých panelech byla přidána 0,4mm vrstva obrázku a výměna…

Downloads
288
Likes
22
Rating
5