76 models
I've used to have a lot tangled cables behind my computer, at my router, behind the TV, all of them of different diameters. To unplug one of them or to find out where the other end leads, used to be a nightmare (and a training in…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Update 20.09.2023 I made 2 improved versions from the original one. The original version had the problem that the leg broke quite often at the joint to the lug that prevented bending. I opened the lug, so the new design has at least 2…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
Každý potřebuje trochu jiné rozměry své krabičky… proto vznikl tento model. Nastavitelné parametry umožnují přizpůsobení modelu. Update: v1.1 - Přidán vnitřní pořadač (Add inside binder) Koukněte i na mé další modely .
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This is a model of a convenient sliding lid box with an easy to use locking mechanism consisting of a bump on the lid that keeps it securely closed. Note that for slim boxes the lid does not bend as much and the locking and unlocking may…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Print, push the two parts together with a firm grip until they snap in and then use simple double-sided tape to glue to desired drawer, cabinet door or other appropriate place. Once in place, you can insert/remove/replace paper labels as…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Small customizable rugged box done in openSCAD. Can also be used as openSCAD library. NEW NEW NEW: Version 2.0 out here: Have fun! Please like if you deem it useful! Tips welcome ;-)
Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html , nebo potřebné soubory z knihovny jsou v přiložené složce BOSL2. Doporučuji podívat se také na tento model - Univerzální krabička pro PCB v1.1
Nastavitelné parametry umožnují přizpůsobení modelu. Počet nožek k PCB a jejich poloha atd… Použitá knihovna přiložena. Koukněte i na mé další modely .
This is a very sturdy box which can be parametrized by adapting the OpenSCAD source code. You can change the inner dimensions of the box in OpenSCAD and generate an STL file from it. I printed it in PLA but PETG should also work very fine!
Kabelová průchodka, nastavitelné parametry v OpenSCAD. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Upgrade: v1.3 - verze bez knihovny BOSL2 v1.2- Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
Nastavitelné parametry umožnují přizpůsobení modelu. v1.1 - Oprava chyby Další tvary zde: Kolíček police kulatý Kolíček police sklo
Important note: Adding text to the holder requires PrusaSlicer version 2.3.2 (in beta, as of July 3, 2021, available to download at https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.2-beta ) and above . The older version…
Keycaps parametrizables low profile para switches MX Update: 04/01/2026 - Upload to MakerWorld to use parametric model there: https://makerworld.com/es/models/2197996-parametrizable-mx-low-profile-keycap
Cubo infinito con anillo. El archivo de Solidworks esta parametrizado, permitiendo ajustar las siguientes dimensiones: C= CUBO L= LADO H= HUECO E= ESPESOR ANILLO En el modelo stl, las dimensiones son C= 30mm L= 4mm H= 2.5mm E= 2mm
I just commented out the code for the snaps and hinges and it creates a neat clam shell style box that can be glued together easily. Use a shellThickness of at least 8mm and a infill density of 50% for best sound properties. Cutouts for…
Miska se vzorem plástve, nastavitelné parametry v OpenSCAD.
Nastavitelné parametry umožnují přizpůsobení modelu.
Nastavitelné parametry umožnují přizpůsobení modelu.
Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
Nastavitelné parametry umožnují přizpůsobení modelu. Další tvary zde: Kolíček police Kolíček police sklo
This small container made for my Bosch Intuvia pedelec display is based on Parametrizable Rugged Box by TheSameNameTwice I changed dimensions and added an inlay for the Bosch Intuvia. The white box shown by the picture has been made of…
Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
To my surprise I wasn't able to find a existing generic hydraulic piston model suitable for repairing Bruder excavators. This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is…
Nastavitelné parametry umožnují přizpůsobení modelu. Další tvary zde: Kolíček police Kolíček police kulatý
Nastavitelné parametry umožnují přizpůsobení modelu. v1.1 - Přidán držák plného profilu. Možnost zvolit poloviční nebo plný profil kabelu. Koukněte i na mé další modely .
Nastavitelné parametry modelu umožnují v OpenSCAD přizpůsobení pro různé šířky desek. Doporučuji tisk z PET-G kvůli napružení.
Remix of "Parametrizable Rugged Box (OpenSCAD)" by https://www.thingiverse.com/thing:4768000 Added options for inner dimensions and user friendly parameters: https://www.youtube.com/watch?v=rp665S-Zts8 As you can see in the video you can…
Nastavitelné parametry umožnují přizpůsobení modelu. Doporučuji tisknou otočené na bok. Upgrade: v1.1 - přidána možnost posunu vzoru plástve
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP ProDesk 600 G1 computer case. Multiple adaptors could be stacked and screwed together to fit multiple 2.5" HDDs into a single…
Original steering wheel on our Rolly Toys tractor broke, so I designed a replacement. The model is using OpenSCAD for customizability and all major parameters can be adjusted easily, with the model changing accordingly. Should also work…
Designed to fit a 7ah SLA Battery with room for electronics Customized version of https://www.thingiverse.com/thing:5983067 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=5983067 Instructions Using the…
Parametrizable dogtag with fusion 360
Nastavitelné parametry umožnují přizpůsobení modelu.
Možno měnit mimo jiné počet, výšku a šířku kelímků až v 5 řadách. Upgrade: v1.2 - kulatý nebo šestihranný vnitřek, v každé řadě v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde:…
What it is A funnel with a rectangular shape, so that it fits in a small component bin. The funnel is optionally asymmetric, which means that the wide part is not sloped on one side. If the component bins have a lid that opens up to 90…
A simple footstool for guitarists, build from three parts. Standard adjustable footstools are cheap, but… I have personally found the slope of the top surface too big to be comfortable. They topple over too easily. They look flimsy and…
Nastavitelné parametry umožnují přizpůsobení modelu vašemu obrázku.
Nastavitelné parametry umožnují přizpůsobení modelu. Koukněte i na mé další modely .
Simple HSW honeycomb parametrizable bottle or can holder; parametrizable easily by opensource OpenSCAD on all platforms. There are quite plenty bottle holders for HSW available, but I was looking for something easily changeable on the…
Stojan na podtácky, nastavitelné parametry v OpenSCAD.
The uploaded STL files are for a desk thickness of 0-20mm. For best results on the MK4 you will need e.g. https://www.printables.com/model/588524-prusa-mk4-improved-fan-duct-bi-directional-cooling or a similar fan duct to ensure that the…
When searching for a spiral cable protector that I could adapt for use on a Unitree GO1 robot to protect repaired/soldered cables to the motors of one leg, I came up empty. So here's an OpenSCAD based version that conveniently allows…
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
Esta es una llave triangular diseñada para abrir cerraduras de cuadros eléctricos, contadores de gas y agua, o cubos de basura . He creado el modelo en varias medidas estándar , pero también está disponible en versión parametrizable ,…
Nastavitelné parametry umožnují přizpůsobení modelu. Použitá knihovna přiložena.
Replacement part for broken overfill cover in an old bathtub. With default parameters it fits a system with 42mm or slightly larger hole, where it is screwed with a single screw to the pipe on the other side. You can open the source in…
Nastavitelné parametry umožnují přizpůsobení modelu. Koukněte i na mé další modely .
Nastavitelné parametry umožnují přizpůsobení modelu. Koukněte i na mé další modely .
Nastavitelné parametry umožnují přizpůsobení modelu.
Nastavitelné parametry umožnují přizpůsobení modelu.
Description This is a quick headphone holder I designed in FreeCAD in about an hour or so, to hold my headphones on the side of my desk. The design is parametrized, so you can change it to fit your headphones and desk. Differences between…
Nastavitelné parametry umožnují přizpůsobení modelu. Použitá knihovna přiložena.
Warning: This is only for low voltages. Fuse holder for fuse 5x20mm with spring from ball point pen. For size changes you can change the parameters in fusion360. If you enjoy the project, please leave me a like or post a make. Assembling…
Nastavitelné parametry umožnují přizpůsobení modelu. v1.0- přidány wallbt - deska s okraji, joint_square2 - spojovací kolík pro dvě desky, joint_square3 - spojovací kolík pro 3 desky.
Parametrizable spool for filament. Create your own spool and use infill patterns like Rectilinear, Grid, Triangles, Tri-hexagon, Honeycomb, Zig Zag, Cubic or even Gyroid as flange wall. Features: Filament notch Filament holes Label area…
Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.2 - verze bez knihovny BOSL2 v1.1 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
Mode made with FreeCad. Fully parametrized box with a magnetic holders. One or two magnets can be set with parameters. All sizes are in “par” spreadsheet. The main parameters marked with green color. m - means “manual”. This value was…
Nastavitelné parametry umožnují přizpůsobení modelu.
Space saving installation for a Mac mini or similar mini PC, by hanging it on the arm of a monitor mount (The premade STL is for a Bretford Mobile Pro Desk Mount). OpenSCAD file provided for customization.
These are simple magnetic supports to fixate a PCB on a steel surface. More specifically, these supports are intended to hold a PCB at the correct (aligned) position on a stencil printer (also called a screen printer). And more…
I used the IKEA 365 10.6l box and mounted a rod inside that holds two filament spools. I designed a very simple mounting bracket for the spool rod, that can either be hot-glued or skrewed to the side (I used hot-glue, and it holds well -…
This is a design for a battery-powered amplified speaker in the size of a (small) briefcase. It is intended to be used with a musical instrument, such as an electric guitar; suitable for practice or small-scale performances. One feature…
Nastavitelné parametry umožnují přizpůsobení modelu.
This tape dispenser is inspired by the horizontal tape dispenser . I redesigned it in OpenSCAD, with various changes to make it suitable for wall-mount use. In particular, this design is for tapes with a core size of 50 mm or 76 mm, and a…
This is a replacement meat pusher for meat grinders. It is parametrizable in Fusion 360, so it can be customized to any grinder size. This pusher matches The Sausage Maker - 7" Plastic Meat Pusher for Meat Grinders . Modification…
A simple and small mount for a fan on a RAMPS1.4 board. The photos show a small 40mm fan, however the brackets are parametrizable and other fan dimensions (e.g. 50mm) could be used easily. The brackets have a small air guide on one side.…
A compact cable clip for fixing cables inside 1515 extrusions. The OpenScad is completely parametrizable, so it can be adjusted to fit 2020 or other extrusions as well. Suggested print settings Rafts: No Supports: No Resolution: 0.2mm…
They have bothered me enough! Printing: PLA is most likely enough, probably use light color with tip on top no support Other diameters: Open the file qm-x.FCStd in FreeCad open the “parameters” spreadsheet modify diameter export: select…
Configurable X hook. Configurable hook to achieve the measurements you need. Practical double hook for hanging, you can make the combinations you need, see image, can normal hang or reverse hang Configurable parameters. NORMAL HOOKS ON…
Con este adaptador su puede ajustar una lamina de pape a la rosca del filtro de un objetivo de 55mm, 100% parametrizable
Remix of "Parametrizable Rugged Box (OpenSCAD)" by https://www.thingiverse.com/thing:4768000 Added options for inner dimensions and user friendly parameters: https://www.youtube.com/watch?v=rp665S-Zts8 As you can see in the video you can…
A compact cable clip for fixing cables inside 1515 extrusions. The OpenScad is completely parametrizable, so it can be adjusted to fit 2020 or other extrusions as well. Suggested print settings Rafts: No Supports: No Resolution: 0.2mm…
Configurable X hook. Configurable hook to achieve the measurements you need. Practical double hook for hanging, you can make the combinations you need, see image, can normal hang or reverse hang Configurable parameters. NORMAL HOOKS ON…
This is a very sturdy box which can be parametrized by adapting the OpenSCAD source code. You can change the inner dimensions of the box in OpenSCAD and generate an STL file from it. I printed it in PLA but PETG should also work very fine!
