Search results: pass

Sort order

3,282 models

P
Printableshvrkh

Chess Rook with Passthrough Illusion

Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…

Downloads
2,281
Likes
473
Rating
4.11
P
PrintablesBoogie

QR-code WIFI password (rickroll)

QR-code fake WIFI password Links to Rick Astley - never gonna give you up

Downloads
1,842
Likes
1,131
Rating
4.9
P
PrintablesNils Kal

Passe Trappe - The Fast and Addictive 1 vs. 1 Game

Here is my design of the board game "Le Passe Trappe" (also known as Flitzpuck). It's a fast and addictive game for two players. The print contains all required parts, the only extra hardware needed is a rubber band (I've used a hair…

Downloads
1,326
Likes
653
Rating
4.71
P
PrintablesEcoDad

Pentagonal Impossible Pyramid Passthrough Fidget

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…

Downloads
1,270
Likes
65
Rating
0
P
PrintablesCalebTimoteo

Minimalist Passport Book Cover/Case - Travel Essentials

Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…

Downloads
1,115
Likes
253
Rating
4.2

Vaccination Multipass Holder

This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…

Downloads
1,062
Likes
179
Rating
4.75
P
PrintablesAZ3D

Simple Compass & Scribing Tool | Fully 3D Printed | Less than 10 grams

Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…

Downloads
990
Likes
295
Rating
4.63
P
PrintablesSimple3D

RYOBI 40V Pass-Thru Charging Adapters

I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…

Downloads
889
Likes
112
Rating
4.86
P
PrintablesRadek Věchet

VW Passat/Golf wheel center hub cap

VW Passat / Golf wheel center cap modeled after the original but with modification (split in two separate parts) to be easily printed OR if you don't want the logo inside, you can go with “blank one object” but supports will be needed.…

Downloads
773
Likes
72
Rating
0
P
PrintablesPapyjo

Rail train Lego passage à niveau rectiligne

Passage à niveau multi-pièces. Pour emboiter la rampe sur les bandes (queue d'aronde) je place l'ensemble dans un étau. Bonne impression

Downloads
694
Likes
149
Rating
4.75
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
Printablesaxe

IKEA Lack Filament Pass-through with PC4-M10 fitting

Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.

Downloads
639
Likes
126
Rating
5
P
PrintablesNeolker

Phone stand for Volkswagen Passat B6 Bluetooth

Remixed and improved Phone stand for VW Passat B6 Bluetooth by: Adrian-Claudiu Bîcleșanu Changes of this remix Sacrificial layer for better print of holes for screws on the base bracket Redesigned left/right and down bracket Bigger holes…

Downloads
542
Likes
54
Rating
4.88
P
PrintablesPrusa.printer

Iris Plotting Compass (No glue or screws, also an incredibly fun desk toy)

Are you an artist who struggles to draw circles between 10 and 70 mm in diameter? Well, I'm not, but you're in exactly the right place. Even if you're not an artist, this plotting compass is a very fun make. Similar designs retail for…

Downloads
532
Likes
104
Rating
5
P
PrintablesMichaelQ

Easter Egg - Impossible Pass-Through

The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…

Downloads
525
Likes
51
Rating
5
P
PrintablesOzzy The Artist

Sharpie Compass [Large Circles]

This is a remix of a model made by Kezat. I made it longer, put accurate millimeter and imperial measuring marks on it, made the tightening knob larger and reduced clearances for moving pieces for more accurate drawing. • After printing,…

Downloads
461
Likes
122
Rating
5
P
Printablesdmeeze

Gift Card Ribbon Box - Single-Pass Three-Part Vase Mode - Parametric

Using under 5m of Filament, and printing in less than 90min, this is a perfect little gift card box you can quickly print while you're getting ready to go to that party. It's formed by a base, lid, and “ribbon” which neatly fits around…

Downloads
406
Likes
69
Rating
4.83
P
PrintablesMichal Fanta

Passengers Car for Wooden Tracks

Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…

Downloads
386
Likes
66
Rating
4.86
P
Printableschristiangda

hole cover with thread (Cable Pass Through)

This is a parametric design of a hole cover with thread developed in Freecad, and the source code is here: https://github.com/christiangda/3d-printing-hole-covers I used this to configure an Ikea PAX enclosure for my Prusa Mini, this hole…

Downloads
381
Likes
49
Rating
4.67
P
Printablessba1

Brio Lifting Bridge Underpass

I always thought that the Brio lifting bridge is built for letting trains go beneath it, once it is lifted. That was also one major reason I bought a 3D printer, actually. It's compatible with the "old" lifting bridge I played with when I…

Downloads
379
Likes
78
Rating
4.8
P
PrintablesREMLURELMI

Remix - Larger Console Tray for Honda Passport/Pilot/Ridgeline

Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…

Downloads
337
Likes
57
Rating
5
P
PrintablesJakub Kočí

Compass artifact

This is my version of a Compass artifact seen in S.T.A.L.K.E.R. series. It consists of several parts that can be easily assembled and mounted with LED lights. Personally, I find this artifact to be much nicer with transparent tubes rather…

Downloads
333
Likes
45
Rating
0
P
PrintablesJones

VW Volkswagen Passat B8 phone tray with rotated USB port

I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…

Downloads
332
Likes
50
Rating
0
P
PrintablesCAR KEYCHAIN

VW PASSAT KEYCHAIN

This unique keychain is a miniature replica of the VW PASSAT , designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette of…

Downloads
307
Likes
29
Rating
4.75

Cover for jacking hole VW Passat

Из-за снега и льда потерялась шапка домкрата. Решил оперативно сделать модель, чтобы поставить ее на место.

Downloads
285
Likes
20
Rating
0
P
Printablesdteng

Dry Box Pass-Through with Magnetic PTFE Coupler

This pass-through is designed for filament dryers or dry boxes. It consists of a threaded connector combined with a magnetic interface. The threaded connector requires a 0.5” (13mm) hole in the box, and is secured by a nut screwed on from…

Downloads
245
Likes
57
Rating
5
P
Printablesbuchnema

Filament Pass Thru / Through for Original Prusa Enclosure

There are a lot of filament pass through solutions here on Printables, but I didn't like how they stick out of the enclosure, so I designed these two fairly flush versions. One is for the mid cover part and the other for the edge of the…

Downloads
234
Likes
59
Rating
4.71
P
Printables3Der

Multipass Version 2

This is my multipass version 2 with features (See demo videos below) including the voice of Leeloo saying 'multipass'. Here's a demo of its features ( https://youtu.be/BCjvFPc9UcI ) This uses circuit python. I modified this model to…

Downloads
218
Likes
72
Rating
0
P
PrintablesPeter Farell

Bodhisattva of Compassion

Bodhisattva of Compassion

Downloads
210
Likes
47
Rating
0
P
PrintablesDedoper

Car fuel card parking pass holder

Card holder for in the car to store the fuel card, parking card or access card etc. For mounting in the car, use 2 countersunk flat head screws or double sided tape. Filament: ABS or PETG Layer thickness: 0.20 mm Filling: 15% Support:…

Downloads
202
Likes
17
Rating
4.67
P
Printablesferspam

VW Passat 3C reardoor knob for warning triangle compartment

I broke this piece of the warning triangle compartment in the rear door of my Passat 3C (year 2009) by closing it too hard. I have designed this just like the original and after 3 years I have not broken it again. It's true that I've not…

Downloads
200
Likes
18
Rating
5
P
PrintablesBooks

Compass Rose Coin

A coin with a compass rose engraved in it. Uses art from PublicDomainVectors.org .

Downloads
198
Likes
19
Rating
5
P
PrintablesFabio3D

Marker compass adapter: pen clamp

Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…

Downloads
196
Likes
28
Rating
0
P
PrintablesRichard

You shall not pass!

Lithophane of amazing scene of Gandalf fighting Balrog in Moria. Printed with Prusament PLA. See the print file for more details. Lithophane is best to print “standing” and it must be 100% filled so the picture is visible. I would very…

Downloads
158
Likes
36
Rating
5

VW Passat B5 keychain

I was looking for a such a key chain STL file everywhere, but there was none of such thing. The idea of model comes from my friend who is obsessed with this car. I used Amazon Basics dark gray PLA with 0.12mm layer height

Downloads
152
Likes
16
Rating
5
P
Printablesnurotikpanda

Original Enclosure Center Plug PTFE Pass-through

This replaces the center plug for the Prusa Original Enclosure. You can pass the PTFE tube from the Print Head to a dry box. For best, performance, replace the FS-Cover with this one . I used this PTFE adapter for my Sunlu Filament dry box

Downloads
144
Likes
26
Rating
5
P
PrintablesDesertStorm

Top Edge Plug with cord pass for Original Prusa Enclosure

Remix of the Top Plug Edge for original Prusa Enclosure with a hole on edge to allow a cord pass through. I needed a plug that allowed my USB cord to pass through and I didn't want to remove the USB end, so I remixed the model to have the…

Downloads
135
Likes
34
Rating
5
P
PrintablesFlo

dowel pin clamp / Passstiftklemme (thin and thick version)

Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…

Downloads
120
Likes
36
Rating
5
P
PrintablesNISAkuh

Mandala Art Compass/Ruler

This simple, easy-to-use mandala art stylus is designed for quick setup and effortless use. It only requires a single M3 screw or a thumb pinch to assemble, making it ready to go in seconds. Perfect for both beginners and pros, it…

Downloads
117
Likes
21
Rating
4.5
P
PrintablesElyse

Money Box or pencil cup Impossible passthrough - Single Extruder, Dual Color

Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…

Downloads
96
Likes
24
Rating
0
P
Printablesprimalgeek

Remix of Guym's Prusa XL screen guard with LED light passthrough

I love the original design, but wanted to be able to see the screen status LEDs better so I added a section to print with a translucent filament. The main body is tool 1 which is the primary color, tool 2 is the section for the…

Downloads
92
Likes
24
Rating
0
P
PrintablesMilan Horínek

Passat B7 Lumbar Support Lever

Lever for adjusting lumbar support on front seats of VW Passat B7 (probably even more VW models, but IDK I don´t own more of them 😅). It fits both driver and passenger side. The one in photo was printed on i3 mk3s+ using Prusament PETG…

Downloads
89
Likes
4
Rating
4
P
PrintablesAberdeen Apiary

Vaccination Multimaterial Multipass Holder

At least a fourth generation remix of an awesome multipass model. My remix comes from the remix by Scotland who adapted it to fit the CDC vaccination cards. I didn't have a steady enough hand to paint them well, so I separated the…

Downloads
87
Likes
16
Rating
5
P
PrintablesPacho_z3D

No Trespassing sign

just sign: ) Full: 216x168 mm Half: 108x84 mm It is prepared for two colors, no MMU needed. Note: If you want use it commercially, just contact me. If you like this model (which is not behind a paywall) you can buy me a coffee.

Downloads
87
Likes
34
Rating
0
P
PrintablesAnde

Magnetic compass

You'll need a 20x10x2 mm square magnet. Use slot in the compass to put the magnet in. You can add a bit of glue, but check the polarity before - if magnet is reversed, then North points to South. Then just turn the magnet around. Magnet…

Downloads
87
Likes
23
Rating
5
P
PrintablesOleksandr

Passive-Aggressive Speakers Stand

Stan for DIY speakers. You can order the kit to build such speakers here: https://www.soundimports.eu/en/300-7148.html

Downloads
82
Likes
17
Rating
0
P
PrintablesEGDO

Warning triangle compartment knobs for Passat

Warning triangle compartment knobs VW passat b6. I made this 3D model to fix my car, it worked even if it's not perfect. I hope it will be useful, as I can see from internet the same knob are used in other VW model than passat. I needed…

Downloads
72
Likes
1
Rating
0
P
Printablesayamuz

COVID Multipass

This version doesn't require glue to assemble top and bottom parts. It adds supports around the card slot, which can be broken with a knife. Using PLA, this wasn't a problem. Big plus, it fits on the MINI+ plate.

Downloads
72
Likes
25
Rating
0
P
Printablesbuchnema

PTFE Filament Pass Thru / Through for Drybox

For my Ikea drybox mount I needed a filament pass through for PC4-M10 fittings which don't stick out of the drybox. So I made this model for the 10,6L size Ikea 365+ container for two filament spools. Printed in PLA with 0,2mm quality…

Downloads
68
Likes
12
Rating
5
P
PrintablesVodouch

VW Passat B5 Front Right Door Knob Rosette

I created the model as a replacement for a cracked original. It's not a 100% exact copy, but it's good enough for me. The printed model in the picture is a test model made of PLA, but due to summer temperatures it might be better to use…

Downloads
61
Likes
5
Rating
0
P
PrintablesTeraflop

Private Property No Trespassing, No Soliciting, No Flyers Sign, 24 Hour Audio and Video Surveillance

PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.

Downloads
58
Likes
11
Rating
0
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Back Widow Left Edge Plug with Cord Pass Through

I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…

Downloads
58
Likes
14
Rating
5
P
PrintablesRo3Deee

Optimised Prusa XL side filament bypass - UM2 Quick PTFE Pipe Coupling Collet

Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…

Downloads
55
Likes
10
Rating
5
P
PrintablesAdri Brow

Portalápices, caja o/y alcancia de paso imposible - Pencil holder, box or/and piggy bank that cannot be passed through

Diseñe el modelo con el objetivo de poder tener dos portalápices fácil de juntar para ahorrar espacio, pero que tuviera un diseño lindo y llamativo, me inspire en los juguetes de giro con paso imposible para llegar al modelo, al cual a…

Downloads
54
Likes
13
Rating
0
P
PrintablesAdastorm

Every 60 Seconds; A Second passes in Africa Keychain

A simple keychain that states the obvious. Printer: Ender 3 Pro Layer height: 0.12mm Filament: PLA Slicer: Ultimaker Cura For colour swapping, i just paused the print at a layer and manually swapped my filament

Downloads
48
Likes
11
Rating
0
P
Printablesguennersen

Passap Pfaff Duomatic 80 Nüsschen / Needle 9670-K

EN Replacement needle with part number 9670-K for Passap/Pfaff hand knitting machines. An approx. 2 cm long piece of PTFE tube (outer diameter 4 mm, inner diameter 3 mm) is used for improved thread guidance. DE Ersatz Nüsschen mit der…

Downloads
40
Likes
2
Rating
0
P
PrintablesPeopleware

Anpassbarer LACK Enclosure Spulenhalter für große und kleine Spulen / Spool holder for large and small spools

English see below Wer sich das Prusa LACK Enclosure V2 gebaut hat und eine MMU2 besitzt, hat vermutlich die Spulenhalter für 5 Filament Spulen gedruckt auf den LACK Deckel gebaut. Nachteil dieses Spulenhalters: Die großen Filamentspulen…

Downloads
35
Likes
5
Rating
0
P
PrintablesSeppel

Prusa MMU2 Filament Passage for Platsa - 44mm Bottom Part

This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet. I am using a stacked Platsa cabinet which means that there is 44mm of wood between the two parts instead of 22mm. This part replaces Kalle's bottom…

Downloads
32
Likes
5
Rating
0
P
PrintablesJPS

Stand für Magenta TV-Stick und evtl auch für Apfel-TV bei Größenanpassung

Lläßt sich mit verschiedenen Materialien einfach drucken. Wer möchte kann für besseren Halt 2 kleine ( ich habe 10mm x 1mm genommen ) N52 Magnete benutzen/an-einkleben. Weiterhin ist der Ständer/Halter beidseitig nutzbar und jedesmal ist…

Downloads
27
Likes
1
Rating
0
P
PrintablesBoBaCool

Barriere passage a niveau - Duplo - Railway crossing barrier

Barriere passage a niveau Duplo de rechange. Replacement Duplo railway crossing barrier.

Downloads
23
Likes
2
Rating
0
P
PrintablesCAD-Guy

Filament passage

Filament pass through for wood panels from 13mm to 18mm. I had some issues with the printed tread, so I have just cut it with a screw tap.

Downloads
20
Likes
7
Rating
0
P
Printables3DMason
18+

The source marked this model as adult content.

Downloads
18
Likes
11
Rating
0
P
Printablesa.jova

Passive Sound Amplifier for CMF Phone 2 Pro

Upgrade your mobile audio experience with this compact, passive sound amplifier. This device requires no batteries or external power ; simply place your CMF Phone on the stand (or fast it with the dedicated screws) to enjoy amplified…

Downloads
17
Likes
0
Rating
0
P
PrintablesFabrigator

Toyota Corolla Passenger Air Bender

Ever been driving in the heat and wanting the cool air coming out for the non existent passenger to actually reach you. Well this adapter should help direct cool air towards your midriff. Print with PETG or PLA depending on your needs…

Downloads
15
Likes
10
Rating
0
P
Printablessabbrad6

Blackberry Passport Holder

Commercial use: Even if the license forbids this I agree if you show this model to your audience in a video etc. or use it if you run a business. Only selling the files or the physical model is prohibited. Please remember to name me as…

Downloads
10
Likes
1
Rating
0
P
PrintablesLudo B

Paaldoorgang, Pole passage, stake passage, Pale passage, tube passage

Om mijn 3 hoekig zonetent aan een paal (buis) vast te maken zonder dat het touw stuk gaat. Het touw zou anders doorscheuren op de scherpe kant van de buis. To attach my 3 angular zone tent to a pole (tube) without breaking the rope. The…

Downloads
7
Likes
1
Rating
0
P
PrintablesHelle

V02 Tisch oben passend zu Tisch unten V02

Schafft Platz in einer Borte zb. für Pz Modelle.

Downloads
6
Likes
0
Rating
0
P
PrintablesMotherBuzzard

Lincoln Log Train Passthrough Shed

This is a passthrough style shed I designed to fit Lincoln Log tracks. It is not based on any particular Lincoln building - the goal was just something that would appeal to young train enthusiasts. I printed in PLA with the default Prusa…

Downloads
6
Likes
7
Rating
0
P
PrintablesLIG Computer

Spiral Passthrough Fidget

This is another spiral passthrough fidget. The center can pass through in either direction. Do not scale down and I recommend not to simplify the model. It stands 3.375" (85.725mm) tall. The model in the picture was printed out of ABS…

Downloads
12,155
Likes
1,251
Rating
4.91
P
Printableshvrkh

Christmas Tree 4-in-1, Spiral Vase, Passthrough

Christmas Tree 4-in-1 We present our latest Christmas decoration – Christmas Tree 4-in-1 ! This model includes four different variants that you can print in various modes to create a unique atmosphere in your home. Tree Variants 1. Solid…

Downloads
11,533
Likes
2,219
Rating
4.93
P
PrintablesTechMagic3D

Ultra Durable Cone Fidget Passthrough Spiral Toy

This is a scaled version of Zagatorz's amazing fidget toy. My friend had printed another version of the spiral passthrough that would break when dropped, so when I found Zagatorz's one with the thick base, I was elated! However, the shape…

Downloads
11,370
Likes
399
Rating
4.9
P
PrintablesIshdo

Iris Compass Circle Drawing (Easy to assemble)

*Update: added STEP files & link to assembly jig . *Update: added STL files without text. I Saw Makers Cabinet's IRIS and had to have it, but the I found how much it costs and decided to design a 3d printable version. Maybe someday I'll…

Downloads
11,363
Likes
3,623
Rating
4.51
P
PrintablesMaster Printer

The BEST Impossible Vortex Passthrough

What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…

Downloads
9,740
Likes
802
Rating
4.67
P
PrintablesIdea2Item

Impossible Passthrough Pyramid and Cone style hourglass (Dubbel Size also!) Helical Fidget vortex

Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…

Downloads
9,645
Likes
679
Rating
4.69
P
PrintablesEcoDad

Triangle Pyramid Impossible Passthrough Helix Fidget

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…

Downloads
7,438
Likes
307
Rating
4.24
P
PrintablesNeilHailey

Spiral Passthrough Fidget Cone - Easy to Print!

An easy-to-print spiral passthrough fidget cone with a small pointy handle. A Quick Note: These fidgets take hours to design. Please consider subscribing to my Patreon to support my work and get access to my full library of designs , with…

Downloads
5,438
Likes
225
Rating
4.57
P
Printableshvrkh

Wolf - Passthrough efekt

Do not forget to visit my other designs: https://www.printables.com/model/1194818-stylish-tissue-box-pillow Update 30.1.2025 - Tight version This updated version includes a reduced gap between the inner and outer parts to 0.2 mm. The…

Downloads
5,353
Likes
1,313
Rating
4.48

Spiral Fidget Passthrough Toy

This spiral fidget toy is designed with two interlocking, twisted cone-like structures that fit perfectly together, offering a satisfying passthrough experience. Each half features a smooth spiral design that rotates effortlessly within…

Downloads
5,074
Likes
142
Rating
4.81
P
PrintablesRJ Design

Impossible Passthrough - Original Series - Octagonal

The Design Since some have asked for other shapes, here is Version 3 of the Impossible Passthrough/ Vortex Thread Illusion with an Octagonal Base This also fits perfectly with Impossible Pyramid Passthrough, Greater Clearances give smooth…

Downloads
5,043
Likes
509
Rating
5
P
PrintablesMaster Printer

The BEST Passthrough Series (V1.1)

What makes it special I put all twelve of my BEST passthroughs into one download with this V1.1 set. The set covers the original BEST passthrough, the square pyramid, triangle, 4D octagonal pointless, octagonal vortex, rectangle, circle,…

Downloads
4,923
Likes
678
Rating
4.35
P
PrintablesThe Duck Vault

Egg Impossible Passthrough

XY Size Compensation on the Inner Piece at -0.4mm

Downloads
4,793
Likes
509
Rating
3.78
P
PrintablesHexiBase

HexiBox Series: Dayton TCP115-4 7th Order Bandpass Subwoofer

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
4,663
Likes
670
Rating
5
P
PrintablesTitanori

Passthrough Fidget Christmas Tree

Passthrough Fidget Christmas Tree 🎄 A fun holiday themed fidget toy shaped like a Christmas tree. Easy to print, no supports needed Works with PLA, PETG, or glitter filaments Great as a desk toy, stocking stuffer, or small gift

Downloads
4,008
Likes
568
Rating
4.88
P
PrintablesSuperMatt

ID / security pass card holder - print in place - NEW VERSIONS ADDED

Thanks for downloading my model. If you like it and would like to help fuel my designs I'll welcome a coffee donation :D thanks! https://ko-fi.com/supermatt The clear plastic card holders we use at work just don't last. I designed an ID /…

Downloads
3,720
Likes
402
Rating
4.65
P
PrintablesMaster Printer

The BEST Triangle Passthrough

What makes it special This triangle version takes the BEST passthrough idea into a three-sided shape, and its structure runs smoothly once the pieces are set up right. It prints with a structural design that helps the print go smoothly,…

Downloads
3,657
Likes
546
Rating
5
P
PrintablesVertigoMakes

Prusa MMU2 PTFE Holder M10 Passthrough Adapter

Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…

Downloads
3,583
Likes
585
Rating
4.98
P
PrintablesMysticLabs

Passthrough Fidget

First model i have made in fusion360 after following an online tutorial, i hope you enjoy it! Print in place I gave this passthrough a little more tolerance then most that i have personally tried, this thing glides like butter.

Downloads
3,563
Likes
155
Rating
4.6
P
PrintablesThe Duck Vault

Cone Impossible Passthrough

XY Size Compensation on the Inner Piece at -0.4mm

Downloads
3,471
Likes
130
Rating
2.4
P
Printablesgeo panta

BIG EDITION IMPOSSIBLE PASSTHROUGH FIDGET TOY

BIG EDITION IMPOSSIBLE PASSTHROUGH FIDGET TOY A BIGGER FIDGET TOY FOR MORE FUN.250MM!!!!!!!!!! WARNING:FOR THE {{{GREEN PART}}} {{{OUTSIDE PART}}} BEACAUSE I HAVE 2 FAILURES WHEN THE PRINT GOES ON 4h30min YOU MUST TURN THE SPEED ON…

Downloads
3,381
Likes
404
Rating
5
P
PrintablesThoughts On

Mini Fidget Passthrough Cube (2cm)

I wanted to have an "impossible passthrough" style model that is small so I can print one for everyone in a group, as a surprise present is sturdy works well has maximum possible detail for the size both parts should seem like a full size…

Downloads
3,340
Likes
251
Rating
4.4
P
PrintablesScott

GoPro Hero 9 10 11 12 13 USB passthrough battery door

This is a battery door that fits GoPro Hero 9 through 13. Designed so that you can plug in a USB cable while the door is closed. I have personally tested with Hero 10 and others have posted makes showing it is working with Hero 9-13. Make…

Downloads
3,295
Likes
309
Rating
4.9
P
PrintablesSil Noah
Downloads
3,270
Likes
255
Rating
3.8
P
Printables007pickle

Impossible passthrough

Fidget fun for all times!!

Downloads
3,241
Likes
333
Rating
5
P
Printableshvrkh
18+

The source marked this model as adult content.

Downloads
3,156
Likes
2,066
Rating
5
P
PrintablesPeliX3D

impossible pass through calibration cube | fidget helix

I wanted to try designing an impossible pass through model and decided to use a simple 20mm calibration cube as a base. The tolerances between the parts measure 0.4mm - so it's rather simple to accomplish a working 3d print. Please…

Downloads
3,090
Likes
276
Rating
4.4
P
Printables3DPmom

Pear Pass Through Fidget (2 Styles)

This is the Pear-fect Pass Through Fidget for all the pear lovers in your life 🍐 I designed two styles: a pear with a closed bottom and a pear with an open bottom for the core to pass all the way through.:) 3D PRINT SETTINGS Layer Height…

Downloads
3,074
Likes
572
Rating
4.33
P
PrintablesDave

Quieter twisting fidget pass through cones

December 2024 A friend showed me a twisty cone that she liked the look of. https://www.printables.com/model/927393-spiral-cone-fidget-toy The original is too loud for my taste, so I started from scratch in Fusion and found that mesh…

Downloads
2,985
Likes
157
Rating
4.86
P
PrintablesThe Duck Vault

Pawn Chess Piece Impossible Passthrough

XY Size Compensation on the Inner Piece at -0.4

Downloads
2,936
Likes
487
Rating
4
P
Printableshvrkh

Passthrough Easter Egg – Stylish Decoration and Fidget in One

Model Description Introducing the passthrough Easter egg, a special 3D creation that combines the charm of a festive decoration with the practicality of a fun fidget toy. This model allows for endless creativity with customizable color…

Downloads
2,713
Likes
368
Rating
4.5
P
PrintablesDarkka

Impossible Passthrough - Interchangeable Spiral Fidget Toy

I designed these three fidgets that are interchangeable. Let me know if you would like any other shapes. NON-COMMERCIAL USE ONLY

Downloads
2,692
Likes
264
Rating
4.89