Saint Paul
Saint Paul. Filled Back. Added UV Displacement. Sculpting.
- Downloads
- 876
- Likes
- 141
- Rating
- 5
419 models
Saint Paul. Filled Back. Added UV Displacement. Sculpting.
Hi all, tired of your old poti knobs? Here is the Solution ;) Easy to Print Poti Knobs for Les Paul. I have two Versions. This is Version 2 with embossed numbers and separators. The gcode contains 4 knobs. The printed Part on the picture…
this is an original design, just reuploaded to printables https://www.thingiverse.com/thing:4783829 DISCLAIMER: I've only tested this on a gametime buddies guitar, however it does closely resemble a wii les paul, down to screw hole…
Tired of making knots? I was, so I designed some fast to print hooks with a special twist: they hold up strong but are easy to use. You clip them on, then you tension the string by puting it into the little hook, this will ensure a strong…
Hi all, tired of your old poti knobs? Here is the Solution ;) Easy to Print Poti Knobs for Les Paul. I have two Versions. This is Version 1 with raised numbers and without separators. The gcode contains 4 knobs. The printed Part on the…
One of my favorite Jean Paul Gaultier eau de toilette – Le Male doesn't use a classic cap for closure, but a metal lock. Unfortunately, mine broke, and since it's really not a good idea to leave the spray unprotected, I had to model a…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
BB8 Stand designed by Paulorfo; downloaded from Cults3d.com. https://cults3d.com/en/users/paulorfo. Can be painted to match BB models made. Very easy print. Thanks to the designer for the free print and easy answer to keep the droid from…
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
(German below) English: Because I didn't like to screw or glue our new room ceilig, I wanted to attach our smoke alarm onto our nice Paulmann URail lightsystem Trails. For an easy attachment I used the genius but simple hookpart from…
On m'a donné cette carabine, sans partie douce en extrémité. J'ai donc conçu cette pièce en partant de la base blanche sur laquelle la pièce vient se fixer. Je l'ai imprimé en TPU Amazon Basics, un peu trop plein, il est bien dur. A vous…
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
I remodeled the original cover to be an able to reprint it with a darker or more light absorbing material (e.g. silver, black) - so that less light gets out of this genius hallway light. original Product: Paulmann 1x 107 lm LED Set
Stuff you need to buy: -M3x20mm screws (21 count) -M3x20mm nuts (21 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
The source marked this model as adult content.
Fret Buttons in Action Note these are 90% buttons. Gameplay Footage This is my version of a clone hero/guitar hero guitar in the style of the Les Paul Gibson. My goal was to make the best possible guitar with no compromises. Please also…
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Since Lego seemingly has stoped producing kamas I decided to take it into my own hands and designd my own for printing so everybody can have the happines of having driped out clonetroopers ! The kama The kama is designd to be printed in…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Supports…
This model is compatible with the lego system.
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale The real Lego Epaulettes don't fit on a real Lego Skeleton minifig, so had to make it a bit longer, so it will fit the…
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
This is a wall mount that I designed for my Guitar Hero guitars. Designed for the Wii version, but it should fit all Les Paul style Guitar Hero controllers. The holes fit the drywall screws I had laying around. I provided a version…
This is a replacement Lid for the Wii Les Paul Guitar for Guitar Hero. I wanted to route the cable to the outside without damaging the original lid, so I designed my own. Both versions (with and without hole) are available. It prints…
This is an relatively Easy Print to give your Telecaster a personal touch :) Design is made for a single material printer. However you can create special effects if you are printing without bottom/top Layers, just with the many…
it's reuplad from https://www.thingiverse.com/thing:625845
This Beyblade Launcher is designed to be as reliable as possible. It uses bearings and magnets for the stoper mechanic to reduce friction and down wear. You need 2x 608RS Bearings and 2x 8x3mm(or 2mm) Magnets (One 2x10mm Screw for the…
Public domain model of a Les Paul electric guitar by simonrepp . Originally uploaded to Blend Swap .
Electric Guitar model based on Gibson Les Paul. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok. To avoid supports, neck is divided…
This model is compatible with the lego system.
After seeing the Lucky 13 articulated figure by soozafone I knew the amount of articulation could be used for a lot of variations, and this was one of the ones I immediately started working on. I replicated the head and split it into a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Lego Star Wars Pauldron for Clone Troopers. Flexible/movable Pauldron. I modeled this using SiemensNX. Check out my account for more Lego Pauldron's and kama's.
Pickguard modeled after a Gibson Les Paul Standard. Includes .stp for customization and blank .stl for traditional design in your choice of color.
This model is compatible with the lego system.
Ok Mathew I was skeptical of making this because usually some form of Leather or fabric is ideally whats best. But I see now, as you want it for your 1/6th model here it is ; ) I cut this from a storm trooper model. So hopefully it will…
Simplistic 3D model of a shoulder pauldron. Smooth, reasonably thick and about the right size for a large build. Resize and remix to your liking.
Drop-in replacement whammy bar base for Wii Les Paul guitars, in both left- and right-handed configurations. Matches the original design as closely as possible. Printing While PLA can probably be made to work, I recommend printing the…
The Paulskirche was consecrated in 1833 and in 1848 became the seat of the first German National Assembly, on whose drafts the present Basic Law of the Federal Republic of Germany is based. At present, awards ceremonies as well as…
Recommend printing with PETG, as PLA is a bit too brittle. Needs some support under the fingers and battery latch, the default auto generated supports printed well and removed easily on both my PLA print and my PETG print.
I've always loved playing Fender guitars but loved the look of a Les Paul body. This guitar gives the best of both with the body having a cutout to fit a standard Fender Squire neck. There are two cylinders cut in the body so either two…
Here are the files for my replica of Anakin's Pauldron that he wears in the clone wars. these files print stood up with spaces on the back for 2 x magnets (10 x 10 x 5mm) these can then be used to hold the Armour to the sleeve of a…
Interlagos (Autodromo Jose Carlos Pace), Sao Paulo, Brazil, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
Lego Star Wars Pauldron for Clone Troopers. Flexible/movable Pauldron. I modeled this using SiemensNX. Check out my account for more Lego Pauldron's and kama's.
New model, new armor! I'm going to keep doing what I do best and make the types of armor bits I would have loved to play with as a kid. I took the pauldrons from my Bastion/Rampart 13 and added them to the Carbon 13. It limits the range…
Heyho :) Here is part 2/3 of my DIY projector screen project. A practical fastener for the screen (or other thinner objects). It works quite simply and reliably (already tested for a few months on high tension). Part 3/3 of my project is…
The jack plate on my Gibson Les Paul Studio II disintegrated so I created a new one to print in Wood PLA or ABS. The difference between this one and stock is really the jack spacer is inset on the top rather than stick out further. I also…
🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail;…
Heavy duty hook for securing of tarpaulin during the winter storms. Secured to your deck using regular Ø4.2mm deck screws. PRINT PROPERTIES Fiberology Impact PLA 0.2mm layer hight 42% Grid infill 6 parameters No supports
This is a Les Paul Guitar Hero guitar battery door. I created this to replace the missing door for my PS3 guitar. If you'd like one with the RedOctane logo embossed or debossed, see links below. Print settings: Use a small brim to keep it…
This is the mmu2s Version of my single version for a Les Paul Pickguard - an relatively Easy Print to give your Paula a personal touch :) Design is made for a mmu2s printer. You can create special effects if you are printing without…
This model fits the PS3 (and maybe Xbox 360) Guitar Hero Les Paul controller. It replaces the unused RJ11 port on the guitar with a passthrough for a USB cable for Arduino-modded controllers for use with a more modern system and the…
Travel guitar with integrated effect device and power bank. Headless and full scale 628mm. Suitable for E-Gitarrenbausatz Single Cut and pocket pod effect device. Guitar 1 also has a low-latency Bluetooth transmitter for direct…
Hold the pods outside the guitar cavity, making it easier to solder all the wires. Update: additional model (Wiring Jig LP - G59) with larger holes (10mm vs 9mm) and measurements based on…
All these parts are very easy to print with a 0.4 mm nozzle. No supports needed No brims 0.12-0.2 mm layer height Material I used PLA exlusively for the modifications shown in the pictures. More specifically: PolyTerra PLA Forest Green…
Simple clamp to fix the tarpaulin on INTEX pools. This should avoid the tarpaulin to be blown away on windy days. I recommend to print this with somehow elastic filaments like ASA or ABS. To keep the camp flexible i also recommend to…
To switch between the 7 mm or 11 mm widths, simply rotate the blade holder. My print settings: Printer: Neptune 4 Pro Layer height: 0.16 mm Nozzle: 0.4 mm Infill: 15% Speed: 150 mm/s Supports: Only in the larger hole Filament: I used PLA…
Statue John Paul II Use organic supports Nozzle 0,6. permiters 3 infill 15 % grid
Gibson Les Pauls model need support
'cause I thought it would be neat.
I printed a good amount of frets that I found on Thingiverse and Printables, but none of them seemed to fit as well as I wanted. I decided to take what seemed to fit the best and modified it until it was perfect for my PS3 Les Paul. I'm…
An airduct/scoop to fill up the hole in the NZXT H7 Flow. The scoop directs the air from the front fans towards the GPU. This duct is specifically designed to work with 140mm fans. It bolts through the air duct into the 140mm fan as shown…
These bins are inspired by Pred's bins and include the same label shelf. These bins are recreated in build123d and are parametric, I've uploaded 376 variations. They are easy to print (overhangs and bridges are minimised). They support…
I'm remixing the Polly the Propagator Ball designed for a 20mm branch — itself a very nice 3D-printable interpretation of the classic air layering pod/ball/box, a version of which you can make by recycling any appropriately-sized plastic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The official logo for São Paulo Futebol Clube. The famous Brazilian football (soccer) team. I printed mine in PLA with 0.2 mm layer height and 0.6 mm layer width. I used Ironing on black and red top layers. Colors swap: Starts with White,…
Description I designed this model as a gift for one of my best friends. I aimed to faithfully reproduce one of the most iconic guitars in rock history: the Gibson Les Paul . I transformed it into a smartphone stand to keep on the desk…
Heat Set Insert Press With this conversion kit, the Paulimot drill stand can very easily be converted into a melting helper for thread inserts. Never again crooked threads or missing hands. ;) The print can actually be made in all…
I recommend to print it solid and switch colors once it starts to print the letters. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Music
Since my backyard find Les Paul Ultra II came with a broken plate and it is literally impossible to find a replacement online I went and designed my own replacement. When printed in PLA the plate is flexible enough to conform the the…
Replacement plug for Spaulding basketball hoop system base. Keeps the water in. Fits snug as it, which is what you want.
all my keychains are now free on my end for COMMERCIAL USAGE,any licensed images used are owned by there creators and would need separate approval updating permissions as and when i get time paul keychain / necklace charm 2 color stl inc…
Modified to be compatible with guitars: Xplorer/Les Paul(Wii) Originally created by: superryan14
Circuit Paul Ricard, Le Castellet, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
The Gibson Les Paul is one of the most iconic and revered electric guitar models in the world, known for its rich history, timeless design, and versatile sound. It was first introduced by the Gibson Guitar Corporation in 1952 and was…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A replace for the pickup selector switch, suitable for Epiphone and Gibson. Printed with Creality Ender 3.
This is a replacement part for a STEMA trailer. A round knob 20mm to fasten a tarpaulin or net cover. No support needed, if you want to have a better surface you have to chose a smaller layer height, but you lose some stability. Diameter…
I made these to add a bold look to my old Epiphone LPS2 (named Vör) and designed a new pickguard to accomodate the addition of a 3rd humbucker. The selector ring should be printed with a different color for the first layers to get the…
I recently borrowed a microSD card from my friend Paul and decided to send it back to him per mail. But placing the card directly in an envelope seemed a bit risky, since it is thin and small it might get damaged or lost. Therefore I…
F1 circuit Sao Paulo Grand Prix Interlagos Autodromo Jose Carlos Brazil - with elevation, start line and DRS detectin zones. Data (elevation and circuit shape are taken from f1.com). Can be printed with small supports on DRS and start…
Thingiverse Link: https://www.thingiverse.com/thing:106568 Made By: HPaul (Thingiverse) Original Description: This stand provides a sweep, or curved, seamless background for photographing small to medium sized objects. It will hold…
This is a remix of VladTheInhaler's awesome MiniCaster controller design. I liked his design so much and wanted to improve on the design a little to focus less on portability and more on comfort and aesthetic accuracy to the guitars that…
This is a simple remix of Josh Designs's Clone Hero Les Paul controller with a 3rd button opening and mount added to the lower body and panel to allow for whammy along with pause and star power without requiring an analog input (bind to…
Public domain Gibson Les Paul electric guitar model by Asthenia . Originally uploaded to Blend Swap .
ENGLISH I lost the original control cavity cover on my 2011 Gibson Les Paul Studio. After realizing that replacement covers available online are either overpriced or don't fit the Studio model properly, I decided to make my own. The model…
Added frets to the Neck parts of the guitar, and made a custom pattern that any printer can print for the face plates. I also included a slightly redesigned version of the faceplates that are meant to be printed “face down” with no…
This model is compatible with the lego system.
Use this file instead of the “ Spinner_Outside_V4.stl” to be able to launch Metal series Beyblades . There are 3 versions of the spinner. "Spinner_Outside_left_and_right" can be used for Beyblades that can spin only to the left or only to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
St. Paul of Thebes, also known as Paul the First Hermit or Anchorite, was an Egyptian ascetic who lived in the 3rd century AD. He is considered the first Christian hermit and a pioneer of monasticism. According to tradition, he retreated…
Das ist ein LötkolbenAdapter für den PAULIMOT Bohrständer. Zur befestigung eines Lötkolbens. Damit kann man Ruthex Einschmelzgewinde in einen 90Grad Winkel einschmelzen. PAULIMOT Bohrständer mit Arbeitstisch, 43 mm Euronorm-Aufnahme…
These are very easy to print replacement frets for your CRKD Les Paul controller. These work with both the Silicone Neck and the Mech Neck. No Supports are required. Some files require gluing together. I recommend a small dab of…
A model i made while practicing fusion 360. I didnt include the strings. because it would probably not end well… Moddled in real size you will probably have to resize to print. But going too small may result in some very fragile parts.…
The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…
Ich habe für meinen Paulimot Messchieber 300 mm ein paar Erweiterungen gebraucht, um tiefer in einer Box messen zu können. Also habe ich mir diese Erweiterungen konstruiert. Sicher sind diese nicht so genau und da es Kunststoff ist,…
Full guitar body top of a Les Paul to allow you to put leds or electronics under printed part.
Printed with PLA and PLA+ filaments, 0.15mm layer height.