Search results: pegboard

Sort order

3,876 models

P
PrintablesArchipel

Pegboard levitating toolbox

Print your own efficient common tools' toolbox for your pegboard wall. Turn your supports off in your slicer, you will not need support for any of the files includes here. Defy gravity with the "levitating" placement of those designs on…

Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant

Downloads
5,207
Likes
1,267
Rating
4.76
P
PrintablesPatrik

Multiboard pegboard click hooks in various sizes

When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
1,870
Likes
230
Rating
5

Pegboard hook

This hook is made for pegboard with CC 12mm and has a diameter of 3,9mm. for example Biltema's pegboard. This hook is perfect for hanging spanners, for example And this one is designed not to use screws

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
1,143
Likes
128
Rating
4.57
P
Printableskicsikrumpli

Ikea pegboard Sony headphone holder

Hang your headphones on Ikea pegboard. Prints without supports, hooks onto pegboard. Modelled for Sony WH-1000XM4.

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
362
Likes
46
Rating
5
P
PrintablesZach

Pegboard Wall Standoffs

I am adding some pegboards to my workshop area and I realized I needed some standoffs to give them consistent space off of my walls. What's more, the mounting screws I have were just a bit too small to work through the holes of the board…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
39
Rating
0
P
Printablesross549

Pegboard Zip Tie Storage- 4 sizes

Simple zip tie holders for your large zip tie collection. Fits the standard 1" spaced North American pegboard. These are 70mm wide, so they will hold a LOT of zip ties. Heights available: 200mm tall sized for 12"/30cm ties 150mm tall…

Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
32
Rating
0
P
PrintablesRon Harding

Pegboard Organizer for Hornady Reloading Dies

I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
56
Rating
5
P
Printablesnmumphrey

Starrett 12" Combination Square Pegboard Holder -- Sy's Peglock Board

After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
181
Likes
21
Rating
4.5
P
PrintablesStrathpeffer3D

Wera Kraftform Screwdriver, Hex & Torx Driver etc. Set Rack Pegboard Mount

Two adaptor brackets which, when combined, allow for the installation of Wera Kraftform Screwdriver, Hex & Torx Driver etc. racks with 1"/25mm pegboard. The adaptors are based on an stl file I found online designed for IKEA Skadis rack…

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
155
Likes
28
Rating
4.33
P
PrintablesCoolBlackCat

Lidl/Parkside Pegboard Accessory - Wrench 6-20

I created a whole set of holders for my tools on a Lidl/Parkside pegboard. Check for the other holders on my page. Fusion 360 files attached for personal adjustments.

Print approx. €2.95–€3.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
14
Rating
5
P
PrintablesOndra

Hammer holder hook for pegboard from Mars Svratka

Simple holder for pegboard. Fits into the bigger “keyhole” like the hole of some pegboards. I was searching for the Internet, but almost all holders for pegboards are designed for the small holes and not for the “keyhole” like which I…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
13
Rating
5
P
PrintablesOndra

Hook for pegboard from Mars Svratka

Simple hook for pegboard. Fits into the bigger “keyhole” like the hole of some pegboards. I was searching for the Internet, but almost all holders for pegboards are designed for the small holes and not for the “keyhole” like which I have…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
14
Rating
5
P
Printablesnmumphrey

Starrett 6" Combination Square Pegboard Holder -- Sy's Peglock Board

After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
16
Rating
0
P
PrintablesWillis Works

Park Tool FR-5.2H Pegboard Hook

This hook for Park Tool cassette lock ring wrench is symmetrical to closely hold the tool facing left or right. These tools tend to swing around a lot on traditional pegboard hooks, even with hook retaining clips (as seen in some of the…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
17
Rating
0

Smallest cup for ELFA pegboard

Easy 83mm small cup for Elfa pegboards. Required one pair of module clips https://www.prusaprinters.org/prints/60471 Based on remix of https://www.thingiverse.com/thing:2576053

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
12
Rating
0
P
PrintablesLi Ming

Pegboard Hooks and Holders

🔧 Custom 3D‑Printed Peg Hooks & Tool Holders 🔧 🖨 Easy to print on most 3D printers 💪 Stronger than other designs while using less material 🎯 Simple, practical, and perfect for organizing your garage or workshop ✅ Designed with efficiency…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
23
Rating
0
P
PrintablesWillis Works

Bondhus Metric and SAE Hex Set Pegboard Hooks

A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard

Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
17
Rating
5
P
Printablessmandrews

Pegboard Fitted Shelf for Brother TZe Modular Organizer

This is designed to work with the TZe tape organizers from ICT Avatar's model here - Modular P-Touch TZe Tape/Cassette Holder organizer rack This is a simple shelf that attaches to standard US size pegboard but might work with different…

Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
9
Rating
0
P

Pen / Pencil Holder (Pegboard)

The pen and pencil holder is connected to the pegboard with 1/4 inch pins that slip into the pegboard. It provides a convenient location to store and find your writing utensils in the shop. This unit is more substantial than the one I…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
5
Rating
0
P
PrintablesVaultPython
18+

The source marked this model as adult content.

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
19
Rating
0
P
PrintablesCoenW

Multimeter holder for errotools pegboard

This is a holder for a multimeter and cable organizer that fits an errotools pegboard. The model is inspired by this design: https://cults3d.com/en/3d-model/tool/multimeter-holder-pegboard-or-wall-mounted Print instructions I printed it…

Print approx. €6.51–€7.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
5
Rating
0
P
PrintablesCoenW

Screwdriver holder for errotools pegboard

This is a screwdriver holder for a errotools pegboard. It holds multiple screwdrivers. Print instructions I printed it on prusa i3 mk3s+ with 0,4mm nozzle in PETG, 3 shells, line width of 0,6mm, except for 0,45mm external perimeters,15%…

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
2
Rating
0
P
PrintablesCoenW

Pliers holders for errotools pegboard

Four different size pliers holders, each to be mounted in one slot of a 'errotools' pegboard: grip pliers combi pliers long nose pliers Side cutter Print instructions I printed it on prusa i3 mk3s+ with 0,4mm nozzle in PETG, 3 shells,…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
4
Rating
0
P
Printablesmkronmiller

Ryobi One + Tool Pegboard Mount

I was looking for a good mounting solution for my Ryobi tools when I came across a solid design with clever compliant clips by factorem.io . I remixed it to mount to a standard ¼" pegboard (such as Wall Control) using small pegboard…

Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
4
Rating
0
P
PrintablesCoenW

Penholder for errotools pegboard

A high cup for an errotools pegboard, using two slots, fitting for instance pens and pencils. Print instructions I printed it on prusa i3 mk3s+ with 0,4mm nozzle in PETG, 3 shells, line width of 0,6mm, except for 0,45mm external…

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
2
Rating
0
P
Printablesmkronmiller

iFixit Manta 1/4" Pegboard Mount

I wanted a slightly more space efficient tool storage solution for the iFixit Manta toolkit which is why it is oriented sideways. I also included a more standard orientation. I use off the shelf expanding pegs for ¼" pegboard as I've…

Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesCoenW

Magnetic holder errotools pegboard

A small holder for errotools pegboard to hold for instance allen keys, miniature screwdrivers, knifeblades, etc. It fits d4x12,5 cylindrical magnets in it. Print instructions I printed it on prusa i3 mk3s+ with 0,4mm nozzle in PETG, 3…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
2
Rating
0
P
Printablesmkronmiller

1/4" Pegboard Belthook Mount

About Mount for a 1/4" pegboard system to accomodate tools that have belt hooks. Designed it to fit on a standard Prusa Core One but the universal files allow for customization to meet your needs. Required Hardware: QTY 4 pegboard…

Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
2
Rating
0
P
Printablesmkronmiller

iFixit Mako 1/4" Pegboard Mount

I wanted a slightly more space efficient tool storage solution for the iFixit Mako toolkit which is why it is oriented sideways. I also included a more standard orientation. I use off the shelf expanding pegs for ¼" pegboard as I've found…

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
Printablesmkronmiller

Fanttik S2 Pro 1/4" Pegboard Mount

Simple quarter inch pegboard mount for the Fanttik S2 Pro (the rectangular one) It uses 2 of these pegboard expanding pegs to mount to the wall

Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
Printablesmkronmiller

Craftsman cmht77621 1/4" pegboard mount

About Mount for a 1/4" pegboard system to accomodate the Craftsman cmht77621 stud finder Required Hardware: QTY 2 pegboard mounting screws for a 1/4" pegboard (size small)

Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2
Likes
0
Rating
0
P
Printables6d6178

Skadis T-Nuts Mounting System for Ikea Skadis Pegboards

These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…

Downloads
16,191
Likes
3,552
Rating
4.93
P
PrintablesPrusa Guy

Pegboard system hangers

all parts is printed from PETG on default 0,2 quality settings in slicer.

Downloads
9,982
Likes
3,590
Rating
4.89
P
PrintablesRobert G

Skadis Pegboard, all sizes 80 to 360mm

Tired of being limited to IKEA’s fixed SKÅDIS sizes? Here’s the print your own version: fully parametric, resizable, wall-ready. Pick any size you want, 80 mm to 360 mm included Standard 20 mm spacers stand-off Countersunk mounting screw…

Downloads
7,608
Likes
2,253
Rating
5
P
Printablesmgx

Pegstr - Pegboard Wizard

Infinite ways to create pegboard holders and bins for tools, parts or display objects. Highlights: One or multiple (m•n matrix) objects per holder Round, square or rectangular with rounded corners Generate various shapes of bins and trays…

Downloads
7,093
Likes
1,846
Rating
4.71
P
PrintablesMAQUINA

IKEA SKADIS PEGBOARD 200X200MM / 360X360MM

3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…

Downloads
6,311
Likes
696
Rating
4.71
P
PrintablesStellasFun

Sy's Peglock - Locking Pegboard System

This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…

Downloads
6,297
Likes
1,111
Rating
4.9
P
PrintablesAmos491

Pegboard Stuff

These pegboard hooks and mounts are designed for standard American pegboard with 1 inch (25.4mm) spaced holes that have a hole diameter of 3/16 inches (4.8mm). If you like what I am doing, just send a friendly comment. Knowing people find…

Downloads
6,116
Likes
1,033
Rating
4.88
P
PrintablesGokuXIV

Pegboard in 3 different sizes

Pegboard in 3 different sizes. Fully compatible with the IKEA Skadis Pegboard solution. Print settings: 0.2 mm layer height No support needed Mounting: Please use 3mm or 4mm screws. Max head size 8 mm. Either place the board mounts or…

Downloads
4,858
Likes
1,625
Rating
4.91
P
Printablesherbert

Pegboard Screwdriver Holder

I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…

Downloads
4,658
Likes
587
Rating
4.84
P
PrintablesForker45

Pegboard Hooks (US)

Background I tried out several hook designs available for US pegboard, but none fit my pegboard just right or had sufficient strength/geometry for my needs. I spent enough time printing & testing incompatible designs that I finally gave…

Downloads
4,522
Likes
372
Rating
4.93
P
PrintablesYangorang

Power Tool & Battery Wall Control / Pegboard Mounts for Milwaukee M12

Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…

Downloads
4,374
Likes
599
Rating
5
P
PrintablesTheRooster

IKEA Skadis Pegboard - Paint Bottle Holder

I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…

Downloads
3,781
Likes
528
Rating
4.98
P
PrintablesCatdad Workshop

Ikea Skadis pegboard cups (vase mode)

The Ikea Skadis pegboard is cool, and cheap, and quite functional, but at the same time, its accessories are quite expensive. When I moved into my new apartment, I got three of them in order to store a bunch of stuff on the wall of my new…

Downloads
3,760
Likes
926
Rating
4.67
P
PrintablesGekoPrime

Strong hinge, easy latch, fast printing cable winder with parametric CAD. Print in place cable organizer or wire spool for pegboard

The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…

Downloads
3,430
Likes
485
Rating
4.6
P
PrintablesTechnofrikus

Skadis Pegboard keyboard holder v1.5 - now also for splits

UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…

Downloads
3,157
Likes
499
Rating
4.92
P

IKEA Skadis parametric pegboard tray

This is a parametric tray for the IKEA Skådis pegboard. The model can be customized in FreeCAD to fit your needs. Print instructions Customize in FreeCAD. Print without supports (if your dimensions are within reason).

Downloads
2,864
Likes
482
Rating
4.7
P
PrintablesKattstryparen

Pegboard accessories

Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…

Downloads
2,727
Likes
494
Rating
5
P
PrintablesBlue Wings

Ikea Skadis Pegboard Container Box

I remixed this design to include hooks that allows the box to be mounted to the pegboard without having to glue hooks. This means that supports are needed during printing. I have used Tree support rather than normal support as it is…

Downloads
2,701
Likes
425
Rating
4.89
P
PrintablesLittleGreenFire

Modular Pegboard - 100% Parametric Design

Parameters: HoleSpacing - How far apart the center of each peg is. Default = 25mm PegHoleDiameter - The width and height of each square hole. Default = 5.5mm PegboardHeight - How tall the pegboard is, which dictates stiffness. Default =…

Downloads
2,400
Likes
250
Rating
5
P
PrintablesHawk7

LED-Frame for IKEA SKADIS pegboards

LED-Frame for IKEA SKADIS pegboard 🚀 ⚠ Before you start this project, check out the New Version 2.0 of this design! It's a new iteration with better modularity and available CAD files. --- I'm sharing the design of this LED-Frame I made…

Downloads
2,305
Likes
1,502
Rating
4.77
P
PrintablesPaul

Pegboard Hook

My original design from Thingiverse was remixed into a better design , which I used instead of my own. I decided to resurface it here with some improvements of my own. This design is a little more rigid and snug. Enjoy! I've used it in…

Downloads
2,215
Likes
184
Rating
5
P
PrintablesJayKeyStk

IKEA Skadis pegboard - Lock plugs and secure hooks

Stop the original metal hooks from falling down and ratling around. Use the 3D printed hooks for even more securely fastened hooks as well as to spice up the colors on your Skadis board. The included tool allows for quick and easy removal…

Downloads
2,112
Likes
440
Rating
4.9
P
PrintablesWittless

Pegboard Cup

Just a small cup to mount on a pegboard to hold small items like screwdrivers. Edit: Added a second bigger model due to several requests. I had initially made the cup smaller to fit very snug and secure into my pegboard so I didn't risk…

Downloads
2,037
Likes
313
Rating
4.59
P
PrintablesKC

Milwaukee Tool Holders for Pegboard or Wall Control

I decided to clean up my tools. Started with wall control and then added more metal pegboards later. The pegboards I ended up with have smaller holes so I modified the anchors to suit mine, both are included. These will fit both pegboard…

Downloads
2,028
Likes
294
Rating
5
P
PrintablesCabbitCastle

Ikea Skadis Pegboard Wargaming Paint Bottle Holder

Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…

Downloads
1,963
Likes
573
Rating
4.5
P
PrintablesStulli

Skadis pegboard phone holder

Simple phone (or Tablet) holder with two angles for the popular Ikea skadis pegboard. I used the awesome T-Clip Design of Xuis (https://www.printables.com/model/256896-skadis-t-clip-system) to attach this holder to the Board. Please…

Downloads
1,904
Likes
557
Rating
4.89
P
PrintablesCovertContours

Compact Pegboard Hook - (Ikea Skadis)

Simple and strong little hook. Updated Feb 16/22 Appreciate everyone's feedback! Version 2 is available below. While still a snug fit, this one doesn't need anywhere near the same amount of force. Feedback is always welcome. Hoping to…

Downloads
1,894
Likes
293
Rating
4.9
P
Printables3icad

Parametric Standing Pegboard with Desk Stands

A customizable, freestanding desktop pegboard designed to organize your workspace, electronics bench, or hobby table without drilling holes into your walls. Compatible with standard slotted pegboard accessories (such as IKEA SKÅDIS hooks,…

Downloads
1,746
Likes
683
Rating
5
P
PrintablesMeyui

Skadis Shelf Tray - Asanoha Pegboard Organizer

SKÅDIS Shelf Tray - Asanoha Pegboard Organizer Discover a practical and refined way to organize everyday items on your SKÅDIS board. This collection features three trays designed to hold kitchen, office, or studio accessories securely and…

Downloads
1,577
Likes
654
Rating
5
P
Printablescatnerd

Universal hooks for pegboards (like IKEA SKADIS or UPPSPEL)

Some universal hooks for pegboards like IKEA SKADIS or UPPSPEL. Different lengths available. Printed with PLA and 15% infill. No supports needed. Material prize is around 0,05€ for each. Freecad model and .stl files attached. Have fun!…

Downloads
1,566
Likes
202
Rating
4.85
P
Printablesfranpoli

Parametric Ikea Skådis Pegboard Accessories

Here is an OpenSCAD library to generate accessories for the IKEA Skådis pegboard . Check the instruction linked below for the usage: https://github.com/franpoli/OpenSCADutil/tree/master/libraries/ikea_skadis_pegboard_accessories Download…

Downloads
1,526
Likes
518
Rating
4.88
P
Printablesagepbiz

Xbox Controller Stand for IKEA SKÅDIS Pegboard

I've designed a minimalistic Xbox Controller Stand for the IKEA SKÅDIS pegboard Subscribe or follow me on: Instagram: https://www.instagram.com/agepbiz/ YouTube: https://www.youtube.com/user/agepbiz Twitter: https://twitter.com/agepbiz

Downloads
1,515
Likes
291
Rating
5
P
Printablestheamzngq

Ryobi Power Tool Pegboard Holders

TOOL HOLDERS AND PEGS REVISED!! UPDATED Aug 19, 2026 Added battery holder, remixed the excellent holder by Jerrari to add UniPeg slots Replaced Battery Post V4_Curve Down, removing weird void found by user @Glory0_2597396 UPDATED Jan 20,…

Downloads
1,507
Likes
249
Rating
4.88
P
Printablesdevdrik

Honeycomb Ikea Skadis pegboard plier/scissor/anything holder, hex all the way and no supports

This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…

Downloads
1,474
Likes
329
Rating
4.79
P
Printablesumar167

Universal Controller Holder for Skadis (SKÅDIS) Pegboard

Here's another modification I've done to be compatible with the Skadis Pegboard! The easiest was putting the hook on. The hardest was making sure every controller I had was fully compatible. I used the modified ps4 controller holder as a…

Downloads
1,458
Likes
250
Rating
4.81
P
PrintablesG3ox

Lidl pegboard hook (Parkside / Powerfix)

UPDATE 09.01.2023: I created a stronger version for heavier tools and with an extension on the left to better handle forces from one side (for the extension on the right just mirror the model in your slicer). I have also included the…

Downloads
1,403
Likes
236
Rating
4.67
P
PrintablesHarti

Pegboard shelf

A small shelf to present your 3d Prints on a pegboard-wall. For this model a bit of support is needed to print the holder for the shelf. Pegboard holedistace: 23mm Pegboard holediameter: 6mm

Downloads
1,345
Likes
297
Rating
4.4
P
Printablest0b1

Pegboard hooks for IKEA SKÅDIS

Simple hooks for the SKÅDIS pegboard from IKEA. OpenSCAD files are included for your adjustments.

Downloads
1,338
Likes
221
Rating
4.86
P
Printablesmakerunit

IKEA "Skådis / Skadis " pegboard accessories

Hooks and a paper towel holder for IKEA Skådis pegboard. As seen in YT Short video: https://youtube.com/shorts/XZz_wNMSfuw?feature=share

Downloads
1,315
Likes
382
Rating
4.82
P
PrintablesSilver beast

ikea skadis pegboard desk clamp

this clamp holds skadis pegboard made by MAQUINA : https://www.printables.com/model/73926-ikea-skadis-pegboard-200x200mm the 3mm version

Downloads
1,295
Likes
550
Rating
4.67
P
PrintablesSvettis

Square Pegboard Hook

A simple hook I made for my pegboard that uses 9mm square holes with a CC of 38 mm. I printed in PLA with 40% infill and it feels very solid.

Downloads
1,287
Likes
128
Rating
4.75
P
PrintablesDeLongShot

Pegboard 5-inch/127mm Sandpaper Disc Holder

I liked the idea of this design …but I wanted one with wider and more more slots and would not require supports to print. So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have…

Downloads
1,254
Likes
235
Rating
4.8
P
PrintablesRuxi

Gridfinity baseplate [2x4] with Skadis Universal Hook mounts for IKEA pegboard

Tired of gloopy overhangs? Need to mount gridfinity organizers on an IKEA skadis pegboard? Welp, here it is! Remixed @glitchprinter's 2x4 baseplate with four ikea skadis universal mounts. --- Parts used in this remix Magnetic Frame - 2x4…

Downloads
1,206
Likes
254
Rating
4.93
P
PrintablesPeterBr0

Pegboard Pegs

These hooks are perfect for hanging hats, keys, necklaces, or anything with a loop from a pegboard! They are specifically sized for a board with 1 in (25.4mm) space between holes, and a thickness of 0.26 in (6.7mm). Printed on my…

Downloads
1,192
Likes
168
Rating
5
P
Printablesbrenpoly

Meta Quest 2 mount for Skadis pegboard

Remixed Meta Quest 2 HMD and controller mounts for the Ikea Skadis pegboard or equivalent

Downloads
1,182
Likes
206
Rating
5
P
Printablesherbert

Pegboard Caliper-Holder

I was missing the hooks for the Pegboard ( http://www.pegboard.perfonet.de/de/das-pegboard/ ) I am using. size: 120 x 60 x 0,5 cm perforation: Ø7 mm hole spacing: 25,4 mm Source: https://www.tinkercad.com/things/gd2YuYFwI4F Print…

Downloads
1,181
Likes
126
Rating
5
P
PrintablesAlex_Repairs

Paint Rack for IKEA Skadis Pegboards

Paint Rack for IKEA Skadis Pegboards Paint storage rack for 26mm paint bottles that can be attached to an IKEA Skadis pegboard. Includes pins to attach it and sturdy holes in the rack that will not break over time. Parts fully designed in…

Downloads
1,150
Likes
196
Rating
4.75
P
Printablesippe

Biltema Pegboard Hammer Holder

This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is…

Downloads
1,125
Likes
154
Rating
4.9
P
PrintablesTheWortLord

Pegboard Plier Holder

I modeled this plier holder for a standard pegboard. I was having issues with existing holders not sticking well to my print bed so I added a connector between the main body and the end of the two pegboard hooks. Just snip this connecting…

Downloads
1,124
Likes
146
Rating
4.36
P
PrintablesBigRedButton

Pegboard anchor

Designed to be able to securely screw heavier objects onto the pegboard. Takes a bit of force to insert and tightens pretty well when a 3mm self taping screw is added. Can also be locked by pushing in some 1.75mm filament. Comes in 1, 10…

Downloads
1,113
Likes
205
Rating
4.89
P
PrintablesMakoto

Perler Bead Pegboard (Customizable!) with various sizes included

This is a design that allows you to create a customized Perler (aka Hama / melty beads) bead base in Fusion 360. I originally designed this in OpenSCAD but found that it took way too long to render. Fusion 360 allows you to have a…

Downloads
1,110
Likes
82
Rating
5
P
Printablesslayernine

Pegboard Wall Mount Spacer with fitted through-washer

Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…

Downloads
1,108
Likes
148
Rating
4.83
P
PrintablesTwogz

Shop Towel Pegboard Mount (Quick Load)

This model is a fully printable shop towel pegboard mount with a quick load function for ease of use (and tactical towel reloads, of course). No dowel rods required! Fits a standard 1" x 1" pegboard, and can be removed/adjusted as needed.…

Downloads
1,104
Likes
538
Rating
4.67
P
Printablesjagerman

DeWalt pegboard dual battery holder

DeWalt battery holder that mounts to a 1/4" pegboard and takes two standard size 20V (AKA 18V in some parts of the world, but using misleading marketing is the norm in North America) DeWalt batteries. I wanted a sideways mount so that I…

Downloads
1,081
Likes
187
Rating
4.78
P
Printablesstefanwest

Modular Skadis Panel / Pegboard

Been looking for a way to display my diecast collection with the help of 3D printers. Discovered IKEA Skadis boards and all the cool items made to be used with them. Been looking for some designs to print my own boards and I liked Asraff…

Downloads
1,062
Likes
133
Rating
5
P
PrintablesSOME Studio

Caliper Mount for Multiboard Pegboard using T-Bolt

This is a caliper mount that is easy to print and attaches to a Multiboard pegboard/small hole using a T-Bolt.

Downloads
1,059
Likes
105
Rating
5
P
Printablesjdegs

Pegboard Hooks (Build123d Customizable)

Variety of pegboard hooks with included sourcecode. These pegboard hooks are designed to work with standard 1-inch center-to-center pegboard with 0.25-inch holes. The design includes one tight fitting peg which improves their strength and…

Downloads
1,057
Likes
115
Rating
5
P
PrintablesShabubu

Pegboard Storage Tray

Simple storage tray for general use with a pegboard. Conveniently, they sit almost flush together, horizontally, if you want to print a row of them. Feel free to tinker: https://www.tinkercad.com/things/gWTecoGJSHi-pegboard-storage-tray…

Downloads
1,052
Likes
223
Rating
5
P

Spray Can Holder Pegboard

remix of Spray Can Holder 4 PegBoard to add hook to pegs : https://www.thingiverse.com/thing:3657721 Category: Organization

Downloads
1,033
Likes
125
Rating
4.9
P
PrintablesJevin

Pegboard Accessories

Various parts for a standard ¼" x 1" spaced pegboard. Screwdriver holders, pen/pencil holders, and a sharps container. Place the pegboard mount into the pegboard, and if desired, place a small m3 nut in the back prior to installation.…

Downloads
1,020
Likes
220
Rating
5
P
Printablesrynn

Direct screw in T-Nuts for Ikea Skadis Pegboards

General: Please take a look at model/228663 for a detailed explanation of what this is and what’s it for. This versions are probably not as tough as the versions with hex-nuts, but usable. Preparation: As my printer produces slightly…

Downloads
1,009
Likes
122
Rating
4.83
P
PrintablesRon Harding

Lockable Pegboard Rivet

A lockable pegboard rivet for 1/4" pegboard. This is based on similar designs I found on Thingiverse, but tweaked to my liking. Pegboard Push Rivets by Kenneth Stout Pegboard rivet by Jon Sanders I liked the general design of Kenneth…

Downloads
1,002
Likes
135
Rating
5
P
PrintablesRussellZ

Pegboard / Wall Control screw anchors

One of the tricks I like to use in organizing my tools is to attach things to pegboard using wall anchors in the holes to accept screws. This doesn’t always work as well as I would hope. Since pegboard is usually 1/4″ thick or thinner,…

Downloads
986
Likes
174
Rating
5
P
PrintablesNottingham82

pegboard shelf

pegboard shelf 5 pegs wide. Printed with supports from build plate only. Started by trying to modify Harti's shelf but ultimately scrapped the whole shelf except the peg and started over.

Downloads
985
Likes
109
Rating
5
P
PrintablesRoboMagus

Pegboard Shelf Mount

Pegboard shelf mount of about 222mm deep. This bracket has some discrete curvature to the supporting struts. Supports are required for the outermost pegs and hooks only. (Middle ones are angled such that no supports are required).…

Downloads
978
Likes
188
Rating
5
P
PrintablesThe3Dprinting

Vallejo PegBoard Bottle Holder - Ikea SKÅDIS

I needed to save some space in my painting area and I decided to get a Ikea SKÅDIS. I wanted to have the bottom of the bottles facing out so I can have a better view of the colours. I made 2 sizes so I can maximize the size of the…

Downloads
976
Likes
196
Rating
5
P
PrintablesBlonky-Kong

Pegboard Shelf

This might take a lot of prints and adjusting to get right. Wish I could remember the brand of pegboard this is.

Downloads
970
Likes
189
Rating
5
P
PrintablesSaddamCZ

Allen wrench holder for pegboards

NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…

Downloads
924
Likes
142
Rating
4.5
P
PrintablesAmos491

Pegboard Helping Hand

When you need a help hand or just something held, for like a minute… Recommend printing the hooks with 80% infill for increased strength, but the rest can be 10-20% infill. Update: I promise it was not intentional that the helping hand is…

Downloads
913
Likes
273
Rating
5