587 models
Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
My contest entry for music instruments. Fully printable, No other hardware or gimmicks. With practice you can master the Lotus and play music. Without the Slide you can have a two tone “coo-coo clock“ bird sound by opening and covering…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
Vous êtes fan de moteur thermique, alors ce porte clef est fait pour vous…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The piston on the boat's manual toilet pump broke and the pump stopped working. Because I couldn't find the spare part in stock and I was forced to buy the complete pump, I decided to design and 3D print the piston I needed to repair the…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
This is a Piston Cup trophy I printed in silk gold PLA that is really knuckle dusters. USE FOR LEGAL USE ONLY.
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
Piston Cup, with several artistic changes. It is available in a single file, or in several parts, for an easy support-less print. The different files are organized in folders. If you use it and achieve a full make, please credit me and…
Glue “Hand” and “Piston” Screw Hand and Base with 2 “Screw M8 x 25” Glue the "Plate" (mine is personalised) 2 version of the “Base” : Full Empty with “Hood” (10x2mm magnet) to hide object Update v2 : more tolerance for the screw
Piston Cup Trophy - Inspired by the Disney / Pixar movies Cars
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
Summary Easy-to-print and without supports printable buddy in the form of an engine piston. I hope you like it! Requires only 15g of filament! Print no supports! 0.2mm layer height or lower 15-20% infill Postprocessing Be careful when…
This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…
PIston 3D model, more files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape%2Fengineering_technology&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters
Piston Cup from Pixar Cars. Print Settings Printer: Overlord Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Just print it laying on the bed Post-Printing ============= If you want all the entire cup joint the top and…
This is a model I designed to be a gift for a 'Cars' enthusiast in the family :) Probably less than optimal but it was well-received.
A great desk decoration for any (car) mechanic! Perhaps a good gift idea for your favorite mechanic? I designed this trophy as a thank you gesture for a friend who helped me fix some engine problems that I had with my car. Required parts…
Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…
A hydraulic piston looking abdomen armor for Dummy 13. This is a hard print, it'll probably not work on 100%-150% builds, and will need supports. The looks are worth it, though.
easy to print highly detailed I hope you enjoy printing and would be very happy about a like and a make.
Print .1, 100 percent infill, full supports
A set of spacers designed to advance a single piston or two pistons on the same side of the caliper. There is a left and a right side spacer that advance a single piston in the case of a sticky piston or to clean each piston. There are 4…
Service tool for Shimano 4 piston disk brake calipers (SLX, XT, XTR, ZEE, SAINT, ...). Perfect to loosen a stuck piston.
A piston is a moving part of a mechanism, usually cylindrical in shape, that moves up and down inside a cylinder. In piston engines, such as internal combustion engines, pistons are a key element in converting thermal energy into…
This is cool keychain for all the motor enthusiasts out there. PRINT SETTINGS: All parts can be printed with out supports. I recommend printing the conrods with 0.12 layer height. ASSEMBLY: Join the two parts of the connecting rod and…
Pad spacer for 4 piston shimano brake calipers. The pad spacer for disc brakes is an indispensable tool for transporting a bike without wheels. Once inserted, the spacer prevents the pistons from extending when unintentionally using the…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
Another take on the piston-keychain with a movable connecting rod. Designed to maximize quality at small size and reduce printing time. Only two parts: cylinder head and connecting rod. No glue/screws/pin required: the rod has to be…
Print Settings: (Across all parts, specifics per part in stl description) .1mm layer height 4 perimeters 15% infill (50% NEEDED for crankshaft, ran out of space in notes) supports ONLY on bottom faces of crankshaft Assembly: (for V1…
3 Cylinder Engine Block With Movable Pistons Easy Assembly: Snap-fit design requires no additional hardware.
Note that the connecting rod has 2 different hole sizes, the small one goes to the piston! if your first few layers aren't perfect you might have to trim the holes a bit. I recommend attaching the rod to the piston first and then…
This is a model I adapted from my CAD courses back in Uni. I disassembled a 50cc engine to design it in Solidworks. I've adapted the model into a pen cup! You can print the model without supports as long as you position it with the top…
This is a very quick remix I made of the piston cup by jasonlcook on thingiverse (https://www.thingiverse.com/thing:3004784). I spent almost an hour cutting out supports, and my son broke it in about 20 minutes. I knew there had to be a…
This is a replica of the four piston bleed block that TRP sells. It is intended to be used with TRP DH-R Evo and TRP Trail Evo brakes but may work with Shimano four piston brakes as well since they use the same pads. Printing Instructions…
View the following link for video demo. View 10-step assembly guide in photos. Post your makes! Seeing your prints is my main motivator for posting models! Design intended for .4mm nozzle and ≤.3mm layer height. Support material ONLY on…
This project is a fully functional I5 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1‑2‑4‑5‑3, 🔩 Assembly Details The model is assembled…
Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
Beer cans mug, make your own design suitable for 500ml cans incl. 250ml adapter for energy cans Print Settings Printer: DIY Sidewinder X1 Rafts: No Supports: No Resolution: 0.16 Infill: 5% Filament: SILK PLA
you can use M4x35mm screws with nuts to hold it together and M4x12mm to attach the crank.
A handguard for the Motorized Piston Pump by XShot. Inspired by the HK433. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl…
Piston imprint cutters. When you need use glue for hard plastic (UHU, Tamiya...).
Piston block for servicing hydraulic, 4-piston brake calipers Remove brake pads and push pistons back into bore. Insert this block and pump the brake to push out a single piston for cleaning. Designed around Shimano calipers, but I have…
So, my crack at a shroud for the MPP, it sports two picatinny rails that are held in by dovetails and two cosmetic plates so you can color match a bit depending on your paintjob or in case of the original blaster just make it light blue…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
The X-Shot Pro Piston Pump AEB Barrel Shroud is a stylized muzzle to cover the exposed barrel of the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a Picatinny rail and M-Lok-compatible slots, this shroud allows for the mounting of…
What's this? This model represents a piston and its connecting rod. While not a faithful copy of the components in an actual engine (more realistic geometries may be coming soon), the piston head features two slots where o-rings would be…
Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…
Short battery stock for the Piston Pump combining the short simple design by ZafC with the utilisation of the original battery door by N8thin. Although this is a remix the battery stock was completely rebuilt from scratch using the two…
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
Unfortunately no yellow/gold fiber :(( The model consists of only two models. When folded, the model is 15 cm. There is a hole in the middle where you can put things. The size can be changed in each of the slicers
If you are like me and absolutely despise the exposed barrel on the end of the new XShot AEB, then this model is for you! I designed this barrel shroud to match the general aesthetic of the blaster, as well as add some extra rail space on…
A 3D printable model of the liquid piston engine designed by me. Print Settings should be 0.2 or 0.1mm for layer height because of the axial fitment of the bearings. The holes in the printed parts for the bearings are modeled as 37.1mm…
This model is compatible with the lego system.
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
This trophy is inspired by Piston Cup from The Cars movie.
Nicely working piston and connecting rod, use as you like just remix. The model was inspirated by the picture below, i did not know how to make the bolts to connect the model to the base so it would be nice if you can do it and post a…
Some problems regarding printing orientations, easy disasemble and more strong joints have been corrected, if you print it let me know how it goes. Remember, my current printer is broken I can not print it. Piston Fidget Toy Crankshaft 1…
Used for Shimano Road & Gravel Disc Brakes to push back the pistons. Very useful wen replacing your worn out disc brake. No Support needed.
3.8mm and 4.0mm thick SRAM Maven brake caliper block to aid in the piston massage process. Details of the piston massage process can be found on the SRAM Mineral Oil MTB Disc Brake Installation, Hose Shortening, and Bleed Manual ("Disc…
View the following link for a video demo of the fanned version of this project. https://www.printables.com/model/547261-piston-engine-mechanical-sculpture View 8-step assembly guide in photos. Post your makes! Seeing your prints is my…
This model is compatible with the lego system.
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
A few months ago I rebuilt a golf cart motor for a friend, and as a result of that, I had this old piston just laying around. I threw a few pens in it, but it really wasn't a good pen holder. So, I got the bright idea to model it in…
The X-Shot MPP is an almost perfect blaster. But it definitely lacks a slingmount option. I didn't find any files online, so I simply created one myself. You can just add it to the blaster by putting it onto the buffertube and fasten the…
Berserker mech from the game HAWKEN. The zip file contains printable parts. Legs, cockpit and arms are movable. For most parts printing with supports from bottom is adviced. I printed my make at 30%
Introducing the Piston Baby Rattle to turn every baby into the gear head you have always wanted. This little rattle can be filled with a child-safe noise maker of your choosing (rice, barley, etc.) Print in PETG on a slow speed for…
Kolbenhalter für die Simson
Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…
Bike Brake Piston Press / Velo Bremskolbendrücker
Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…
I presents one of the project made by my students- a key chain - piston and connecting rod. Category: Keychains
A simple and easy-to-print tool that allows you to effortlessly remove or re-insert the spring cap of the XShot Piston Pump AEB in seconds! The two examples seen in the photos are printed in PETG (dark green) and PLA (brown), PLA and…
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
A compact tool to clean the pistons individually on Shimano 4 piston brakes. Depending on orientation you can clean and lube each piston one after the other. The tool is designed to allow top or bottom loading.
As seen on X and YouTube: Designed for use with the Dayton Audio DMA70-8 full range driver. Usable overall bandwidth of 60Hz - 20kHz. Dayton Audio DMA70-8 Full Range Driver:…
Note: this model also uses my check-valve design (see: https://www.printables.com/model/446650-3d-printable-check-valve ) as a subassembly. For Assembly Instructions please refer to the included PDF.
This is the piston head for a DOHC (duel overhead cam) quad valve piston head. This model has been taken directly from a V6 assembly I designed for a project - however this piston head works amazingly well as a desk ornament '\_ -_- _/'.…
Created a simple tool to help realign the piston on a Flair 58 manual lever espresso machine. I tested it on my Flair58 while fully heated and the tool seems to hold up fine printed with PETG, but use at your own discretion. Also works…
A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…
Beside the existing model for the 4 piston brakes (MT7/MT5), I've created the decoration rings for the 2 piston brakes (MT5 Trail, MT8, ….) It can be printed in PLA and need no support It can be printed in vasemode, but no need for this.
I have a Fiamma Aqua 8 water pump, which lost lots of its pumping capacity. Turns out the three acryllic(?) "pistons" inside were cracked and broken to pieces. Replacements are available at Fiamma, but not these pistons as a set, you get…
A remix of the piston cup trophy but making the piston head, arm & pin one piece in a vertical postion that can be printed with no supports. Base & wings are from the original.
A guard for your tiny pp's! Refer to the original for the shroud's hardware to mount onto the blaster. Print with tree supports. There are two versions, one with picatinny only on the top, and one with picatinny on the top and bottom.
I made this as an inexpensive alternative to a metal tapered piston ring compressor. It worked well on the 87mm bore Nissan SR20DE I am building. I also made one in 86mm, since that is the stock bore for the SR20 and a number of other…
Here is the Piston Cup from cars ! It has been designed to minimize the need of supports. It technically needs no supports but I personnaly used for the wings and the rod just to be sure. I didn't had the time to paint it but as soon as I…
Enjoy the First ever easy clip-in flared magwell that utilizes the groves in the original magwell to hold it onto your Piston Pump! It adds a nice flare of color to your Piston Pump while also giving you the easy of reloading mid battle.…
Wanted to make a little color for my bike.
I made this to compress the rings on a Stihl 031 chainsaw. Plan on making more sizes, if you have a piston size to suggest send email to [email protected] and i will make an stl to add to the project. 46mm for O28 woodboss 48mm for…
These little wedge spreaders -now 50% littler!- will help you keep the calipers of your disc brake system apart when you take your wheel off, and when not helping you do that they'll clip together to store neatly and efficiently wherever…
UPDATE 04.08.25: added thicker version that is closer to the original for handguard addons that clamp to the collet nut, like the terrier handguard by LoneWolf052 replaces the easily cracking barrel collet nut of the PP. i recommend…
There are lots of issues with the model, such as the e-rod not aligning perfectly and being too fragile to turn the rotor externally, as well as the rotor being printed in two parts and only being able to rotate smoothly counter…
This is a simple tool used for the same purpose as the Park Tool PP-1.2 . Sometimes you need to spread the pistons out on a hydraulic caliper to accept a disc rotor. Oftentimes the brake lever is accidentally pulled without a rotor in the…
Hi there, here is my design of a piston/connecting rod assembly based on a Subaru EJ20 STI motor. These parts were designed through the Onshape CAD software. Printing Instructions: 0.12/0.2mm layer height depending on your desired detail.…
