The source marked this model as adult content.
- Downloads
- 2,474
- Likes
- 560
- Rating
- 4.7
150 models
Not the absolute smallest box for the board game Splendor , but it comes in at only 30ml larger, a mere single shot of tequila! What do you get in that delicious extra space? Well, you'll find its standard usability coefficient is 4.3%…
Update 4/5/24: Newest version with small changes. Don't print this version! __________________________________________ This is my take on a compact travel box for Splendor. I printed one a while back that was fine, but the lid was huge…
**** Sleeved version click here ***** EDIT 5/27/25 Added full multicolor version EDIT 8/24/25 Added fully closed custom gem version This is an updated version of my Splendor box with tons of tiny changes I can't even remember. I've made…
I love the new splendor duel but any game I plan to keep I sleeve. That's why I made this insert.
Changed the other end of the Herb Tool's shovel to a tamper that measures 12.5mm OD and is designed to fit the Venty vaporizer from S&B, but will fit a variety of other ones as well. Don't use on warm items. I printed in [dried] PETG with…
This is an updated version of my Splendor box but this time made for Sleeved Cards! EDIT 5/27/25: Added full multicolor version EDIT 8/24/25 Added fully closed custom gem tray I used Sleeve Kings 63.5mm x 88mm. I cannot guarantee any…
Clip Version of the Nevermore V6 Micro Plenum-Body for the 1515 Extrusions. This is just the body with Supports.
The original-design blue tokens were difficult to pick up, so all tokens in this set have been redesigned to be double-sided for easier handling. All tokens are mirrored and optimized for clean, reliable printing. They have been…
a remix of Splendor Tokens: made them rounds removed the text changed onyx gem dimensions: 43mm x 3mm
Replace yours old round Splendor game tokens with this new 3D tokens.
After publishing the sleeved Splendor game organizer ( http://www.thingiverse.com/thing:759711 ), I had a number of requests for a version that would accommodate the four promo cards, and I have updated the design accordingly. I have…
I made this remix of tjdesign's splendor box to use with my Splendor Marvel game. Super easy to print, and can be done in multiple colors.
Inserts for the Splendor board game that hold the base game pieces as well as the various sets from the Cities of Splendor expansion.
This is a card and chip holder for the board game Splendor Print time: 2 build plates ~200 grams of filament ~5 hours on BambuLab X1 BOM: No additional hardware required Materials: Any material I used PolyTerra Draft PLA. Something…
Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…
Remixed the organizer by Kabong to fit the new Marvel version of Splendor. Still fits sleeved cards and I made the walls a bit thicker for added strength. I printed the lid upside down without supports, if you're printer can't bridge well…
Elektroinstalační krabice do zateplení Pro kompletní sestavu je potřeba vytisknout tubus + libovolný nástavec podle druhu montáže. Tubus má délku 180mm a nástavec 20mm takže sestava je pro zateplení tl. 200mm. Pokud potřebujete menší…
Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…
This is a mesh derived from a scanned point cloud and not prepped for printing. This would be used to copy the important geometry (e.g. planes, ports and fastener locations) to create a new intake manifold or to fit-check a model before…
Rotating Gem Tray for Splendor with Lord Holder and Card Holder Print instructions I used a 608 bearing for the gem tray I got the gems from amazon…
I love Steeveet's condensed Splendid box for Splendor - it's the best design I've found, and inspired some boxes of my own for other games. I like to include a reminder of the rules in the bottom of my lids, so I don't have to look up…
I designed this box for when i travel with my games. The need arose because the plastic insert in the original box isn't large enough for the cards when they are in protective sleeves. So this is large enough to accommodate the cards in…
All parts are 207mm wide and should fit in the box. At least they fit in my well used box. I also removed the walls in between each color group of strongholds and raised them slightly to make them easier to reach with my fat fingers.…
Latest files are available on MakerWorld. Get the full color separated Plate Print Profiles: https://makerworld.com/en/models/19550 === Here is a container for sweetener packets. Similar to the ones you see in restaurants and diners. But…
Splendor is a fantastic tabletop game, but the box for the game has a bit of wasted space which reduces the portability of the game. I was inspired to create this design after seeing a post where someone on reddit created a minimalist…
Update 4/5/24: Newest version here . Don't print this one! _______________________________________ This is simply a v2 of my previous design with a deeper logo and printable letters. Print the box, gem tray and lid as normal. Print 3 sets…
Printer settings: Ender 3 V2 10% infill 2mm walls PLA
Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base you can find pictograms for the number of players, age, and duration. I didn't leave any space in the box for the rules book, but…
I made this to hold all the chips in the board game 'Splendor. I suppose it could also be used to hold normal chips too. Or scaled to fit other kinds of game tokens. But this is made to hold the 6 different token types in the game with…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the pretty Plentifin found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming soon),…
These two models greatly improve the play experience of Splendor Duel; particularly when playing on a smaller table. Due to the slot in the nobles tray for the gameboard, you must print with support. The card tray fits cards sleeved with…
The golden horn of plenty!
Had the issue with the tokens falling over everytime we played Splendor, got a suggestion to make a holder for them to take them out easy and put them back in easy. Still fits the boxs together with the smaller travel case i made if you…
Replacement chip for Splendor Duel. Recessed space for sticker. Optimized for 0.24 layer height.
A photo caddy insert for Splendor
For anyone who needs a simple exhaust plenum. I'm working on upgrading my 3D printer ventilation system and needed some bents, ducts and exhaust plenums etc. Figured I might design and print the parts myself. Even with the size of these…
Requires 10x M3x4x5 heat set inserts and 8x M3 screws to mount your fans. Fan cable hole is sized for a 15mm diameter grommet with a 2mm wide groove (not pictured). No single-piece version included since I wanted the cable grommet in the…
Little clip stand addon for the Plenty vaporizer by Storz & Bickel. Just clip one or two of them under the Plenty and it won't fall over anymore. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter…
I wanted a box that snapped together a little tighter and fit all the gem pieces. Liked the original quite a bit, love the space saving. For the best colored logo finish, I recommend printing with the logo facing up, with organic…
remixed mount and plenum for Nevermore V6
Splendor Game Organizer
I loved the removable trays in NoahMishkin's Splendor insert , but wanted to add a way to prevent the box from opening and allowing the cards/pieces to move around. I added QTY (8) of these 6x3 magnets to create a magnetic lid, which…
Remix of tjdesign's splendor gem tray to reduce printing time and filament by 20%. Added some rounded edges
In order to fit the fans into the plenum a few small cuts need to be made with flush cutters. I highly recommend wearing safety glasses when trimming pieces off of the fans as they WILL go flying. First: cut off the wire retention clip on…
I've been having issues with the fragile tab (used to hold the fan cables) snapping off during assembly, as it snaps across the layer line when applying a minute amount of pressure. Admittedly, this doesn't affect the operation of the…
Fits base game box, sleeved cards and lid is not elevated.
Wow, that 'Splendor' box is massive ! That sucks, so here's an insert that fits into the Splendor Duel box, and neatly splits up and organizes all the pieces. I'm sure there's a more efficient way to do it, but hey, this does the job! The…
Made myself a travel case for the game Splendor, as the box is quite big and the game is actually not that much. It holds together quite well but if you want to be sure i advise just putting a rubber band around it in case you want to…
Hab hier einen Schwimmender Tubifex-Futterspender konstruiert.
For having so little inside, the box that Splendor comes in is unnecessarily huge. Though I have found that the really nice versions made by kabong are super convenient, they just aren't small enough to fit in the glove box of my Karmann…
I really like the design of TheForrestFire's Ultimate Magnetic Splendor Box, but wasn't satisfied with the security of the magnets. A friend showed me Hugo's Snaplock Parametric Box, and I decided to combine the two.
This is a funnel for the Plenty Vaporizer. It lets you use the standard Storz & Bickel grinder to dump it's content directly in the plenty's oven without making a mess. It can still be used as a regular funnel but I would suggest cutting…
Esta maceta esculpe el instante de una flor en pleno estallido. Inspirada en el Futurismo italiano, su forma captura el movimiento, la energía y la velocidad del crecimiento natural. Una explosión orgánica que fusiona lo vivo con lo…
One of my favorite board games is Splendor, by Marc André. For a game which requires very few components, that box is rather large, so it's difficult to tote around. I've reduced the footprint and provided a sturdy casing to survive many…
Umožňuje viesť rôzne káble(Satelitný, Sieťový, Elektriky), cez zateplenie na dome. Dôvodovom tejto upraví je to že originál je určený na svetla a zásuvky rozmer bol príliš veľký. Tak som to vytvoril na tento spôsob na vedenie káblov na…
Reserved card you should not show to other players. I do not want to hold it in my hand - use this stand. Holder can carry 3 cars as possible according to the rules.
Plenum and grille for air ventilation/heat echangers. Fits for installation on furniture or drywalls (2cm thick) and with a ventilation tube 90mm (like comfotube 90m). Can be equipped with a filter (like G3 filter). For faster printing, a…
When you're playing Splendor, according to the instructions, the youngest player goes first. Of course, just to keep things interesting, it's always nice to swap the starting player around. This special token indicates where the game ends…
A simple way to hold your Splendor coins while playing the game. Each section has the symbol from the coins on the bottom. These will fit in the original box underneath everything else. Category: 3D Printing
Just as with the base set that requires only a little bit of space for storage of the actual game, compared to its original box size, so does the expansion Cities of Splendor. So, I have taken the dimensions of all the guts and hollowed…
Insert that fits in a box. It speeds up setup time. It's parts can bee used as trays for holding cards during game. Do you like my design? You can buy me a coffee :) Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't…
Previously I printed and really liked the Ultimate Splendor Box by Noah Mishkin ( https://www.thingiverse.com/thing:4586346 ), finding it so convenient to send the chip tray around to each person as turns progress. Unfortunately I could…
Update: 17.05.2026 second version uploaded - wider slots for all type of the cards for the sleeved version - need to be tested by one of the user. First of all - I would like to thank Steeveeet as he was my inspiration in this upgrade…
Did you lose one of your precious Coat of Arms from your Cities of Splendor expansion game? Well, fear not! Couple this file with your resin printer and you'll be right back in business. Heck, print'em all in one go if you have to. Here's…
Did you buy an old Uprint only to find out the previous owner had broken off the air plenum tabs? Download the STEP file and print it on your own without buying an overpriced replacement. With reinforced anchor tabs. STEP file provided so…
This works for both original Splendor and the Splendor Marvel edition. The card trays are large enough for sleeved cards. They can be removed and used to hold the decks during the game. The jewel / infinity stone trays can also be used…
Splendor game organizer with support for sleeved cards and promo tiles.
Primary Features Supports sleeved cards. Pokeball chip organizer, ready for table use. Vertical storage friendly. No lid lift. General Information This game has few components, which made creating an insert that would be friendly to…
A combination/remix of a few existing designs. I've taken the card holder from Patella ( https://www.thingiverse.com/thing:5777834 ) and cut down the scroll holder into a simple box area, and I've redesigned a play area helper based off…
January 7, 2024: Added some more performance data to the bottom of the original blog post on what happens with key down.. https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/ January 4, 2024: I recorded a timelapse…
This is designed to fit in the original splendor box and fits: The base game Cities of Splendor Expansion Premium Glass Gems My pink print failed but is still functional. Print Details Nozzle: 0.4mnm Layer height: 0.2mm Material: PLA…
I always wanted to keep Splendor with extension in single box, but did not like the idea of cards and tokens flying freely inside. This print allowed me to store everything nicely in compact way, additionally whenever i want to play it is…
These tokens are based on a PnP I found long ago of a rethemed version of Splendor. I decided to finally deluxe-ify my PnP with some tokens. You'll need 7 × 5 colors (green, blue, red, white, black) + 5 jokers (gold) for a complete set. I…
Model to help hold chips will playing the great game of Splendor. Fits diagonally in box along with the card tray from https://www.printables.com/model/486524-splendor-board-game-chip-and-card-holders
Both Splendor and the Cities Expansion come with suitable inserts. However, there is no space left in either box to include parts from the other. This insert lets you combine all your Splendor cards/tokens/pieces into a single box. This…
A replacement mouthpiece for the Plenty Vaporizer. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: Replacement Parts
As you may or may not know, some GL1100 part are unobtainable as new parts. So, I designed these replacement gaskets for the air box and the plenum on the GL1100. I think the GL1000 uses the same gaskets, so it may fit that too. If they…
Compact holder to hold the 6 piles of tokens for the Splendor game during play, so the 6 piles of tokens won't constantly fall off. The holder for the gold tokens pile is smaller, so it will be flush with all the others (it's easy to see…
Based on build by CDN_Printing https://www.printables.com/model/204892-marvel-splendor-organizer/comments I printed the base and had issues with cards so I rebuilt the entire thing. Added channels beneath the coin slots to allow finger…
[updated 7/2/2025] 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer. Replaces the original open cell foam that sits between the cabin air filter housing (with the interior/exterior air flow actuator) and the duct leading to the…
I like to play Splendor and now that I own Cities of Splendor , I wanted to organize the game so that all of the parts would fit into a single box. My solution to organizing this game is as follows: Sleeve all the cards. Use my 3D printer…
Daikin AC plenum intake / outtake for the FDXM25F9, FDXM35F9 (and maybe FDXM50F9 and FDXM60F9)…
Organiser for Pokemon Splendor game that fits cards in sleeves.
Did you lose one of your precious Strongholds from your Cities of Splendor expansion game? Well, fear not! Couple this file with your resin printer and you'll be right back in business. Here's a link to the Coat of Arms in case you're…
The Agfa Ansco Plenax PD 16 were are series of folding cameras for 116 film (PD16) format for 2½×4¼ inch negatives (nominally 6.5×11 cm) which was manufactured around 1935. Since the camera is available on the market for a reasonable…
A card case for Splendor Duel , available with or without the Splendor “S” logo on the lid. The case sits neatly in the original box insert’s card slot. Sized for 71 Small / Mini European cards with 80 μm thick sleeves. 46 mm wide Sleevy…
Sleeved cards didn't fit in the original insert, but I didn't want to print a new one, so a designed in fusion 360 this small deck box This fits in splendor duel spanish edition with no premiun sleeves (47x70mm) Game box closes perfectly…
OEM advanced filtertation kit (2025 model) uncomfortabley smashes the filter against the housing on one side and fan on the other. This kit adds a plenum and spacer to provide 20mm of gap on either side of the filter. This is an unrefined…
Redesigned gem poker chip tray for @tjdesign 's Splendor Box v3 with wider supports on the chip holders on the ends of the tray. The original design by @tjdesign is fantastic, but I modified it a bit after breaking one of the thin curved…
This is a more compact (and less spillable) box for the Pokémon edition of Splendor. It fits everything except the rules and Pokédex sheets in nice organized slots. I just didn't personally feel those were necessary in the name of…
These are modules of 10x10 cm and 15x15 cm square and angular that assemble among themselves to build the necessary grid system to the establishment of a plenum in the Jaubert's method of a reef aquarium. The height of the modules is 2…
A cool simple plane to decorate, play with, or color! It comes with an extra engine for extra-measures, too! :D
I printed mine upside down on the bead with simple supports for the fan mounting tabs. I also put some holes in the tabs for threaded inserts. Turns out the fit of the fan into the top of the plenum is pretty snug so I never put the…
I wanted to teach myself how to 3D model gears and made a basic planetary gear set to do so. works great, But i did not intend to make this for sharing, so you will need some uncommon hardware for assembly. iirc i used 3x28 cylinder pins,…
desk holster klutz-proofing for klutz producing tool
The original version of this compact game holder has 2mm walls which may be too thin for some folks (for whatever reason... slicer doesn't fill or it's too fragile). So, here's a 3mm-thick-wall version. Lid ID is 97.4 x 140.9mm Box OD is…