Search results: poles

Sort order

266 models

P
PrintablesJay

Polestar 2 Charger Snow cover

Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…

Downloads
2,515
Likes
82
Rating
4.75
P
PrintablesStuartW

Skis, poles + goggles for Dummy 13

I had this great idea to create some accessories for the excellent Dummy 13 model. Well about half way through I realized someone had already beaten me to it (see https://www.printables.com/model/649568-ski-set and…

Downloads
777
Likes
126
Rating
4.75
P
PrintablesHeller

stringing test poles

Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop. At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool…

Downloads
717
Likes
30
Rating
4.89
P
PrintablesGadeberg

Polestar 2 Cupholder and Armrest

+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…

Downloads
630
Likes
50
Rating
4
P
PrintablesJustin B

Decorative Moss Poles

Three stackable moss pole styles and base Each pole is 200mm tall. Print with a brim Some support may be required

Downloads
550
Likes
101
Rating
4.6
P
Printables0x90

Grow Tent Hangar Clip for 16mm Poles - great for trellis supports

Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring. Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting) These…

Downloads
482
Likes
77
Rating
5
P
PrintablesKubiV

Ski Poles Clip

Attach Ski Poles together for better transport

Downloads
480
Likes
101
Rating
5
P
PrintablesLopatka

Super, Over The Top, Flag Holder For One Inch Flag Poles.

I leave my flag out in front of my house all year. The only time it comes down is before a huge storm or tornado warnings. But living in the Midwest, storms can form quickly, and without much warning (especially in the spring.) Twice over…

Downloads
447
Likes
31
Rating
5
P
Printablesjbutler

Polestar 2 Activity Key Enclosure

The Polestar 2 Activity Key is designed to be disposable. However, if you do not want to throw it away and buy a replacement when the sealed battery runs out (~2 years), it is possible to extract the key electronics, replace the battery…

Downloads
405
Likes
22
Rating
5
P
PrintablesCodingKiwi

Polestar 2 Charge Cover for smaller printers

My custom version of the Polestar 2 charge cover, optimised to fit smaller 22x22 cm print beds like the Elegoo Neptune 4. The supplied .stl file does not contain the Polestar logo due to copyright reasons.

Downloads
380
Likes
30
Rating
5
P
PrintablesAlex

Stream Deck mk.1 Holder/Bracket/Mount for 32mm diameter poles

The Parts are split into bodies which allows for easier printing without support. Parts are labeled A,B and C which are meant to be glued together. Be careful to glue them in the correct orientation. There is a Fusion 360 file attached so…

Downloads
378
Likes
79
Rating
5
P
Printablespajdzik

Improved poles for Crochet Granny Block

Improved poles for Crochet Granny Block Better printability Tight fit

Downloads
376
Likes
70
Rating
3.5
P
PrintablesBazzar701

Tiny NFS Heat Polestar - Mini Cars Series

NFS Heat Polestar, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…

Downloads
338
Likes
49
Rating
5
P
PrintablesSlithmin

Clip for nordic ski poles

There is two models: one for adults ( 16 mm diameter) and one for kids (13 mm diameter). Print in PETG or other deformation-resistant material (avoid PLA). Use supports between the top and the bottom clips.

Downloads
338
Likes
82
Rating
5
P
PrintablesPhasic

Polestar 4 trashcan

A trash can modeled to fit in the center console of the Polestar 4. It has four 9mm diameter holes in the back to press fit / glue in magnets. It prints in 3 parts: Main trash can Lid bottom Lid top You can also only print the main trash…

Downloads
307
Likes
14
Rating
0
P
PrintablesLaurent Vitalis

Polestar 2 Parcel Shelf String Clip

The Polestar 2 parcel shelf has, in my humble opinion, two design flaws. When you remove the shelf, a string can fall through its hole easily and you can lose it on the ground without realizing it. The string is strongly tied with no…

Downloads
289
Likes
40
Rating
0
P
PrintablesDavid S

Polestar Logo

The 10th addition to my logo lineup, the Polestar Logo.

Downloads
287
Likes
11
Rating
0
P
PrintablesRoggason

Universal Hook & Eyelet for Tent Poles V1 – Strong Camping Holder for Tarps and Ropes

Update Available A new and improved V2 version of this Tent Pole Hook & Eyelet system is now available. V2 includes: Improved locking mechanism Redesigned geometry Stronger and cleaner shapes 100% support-free printing Better everyday…

Downloads
282
Likes
87
Rating
0
P
Printablesdem34

N Scale PRR Amboy Secondary Catenary Poles

This is the Original file. Contact my Email at [email protected] if you would like modifications or permutations of the design to your specific needs. Despite the claims of Spencer3D on Ebay to the contrary. I also provide printing,…

Downloads
277
Likes
36
Rating
0
P
Printablesg4hsean

Polestar 2 Charger Snow cover (North American)

I remixed this from: https://www.printables.com/model/90514-polestar-2-charger-snow-cover so like that it fits north american models.

Downloads
261
Likes
8
Rating
0
P
PrintablesNarsil

Polestar 2 central console divider

Very simple central console horizontal divider Printed in PETG

Downloads
259
Likes
20
Rating
4
P
PrintablesmCex9WfH

Polestar 2 - Bin for the central console

This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.

Downloads
257
Likes
20
Rating
0
P
Printables3DSistem

Hiking poles clip

Simple clip to be used as temporary storage for your hiking poles when you need both of your hands free during a walk. Two models available one for full size 25mm strap, and B model for narrower shoulder strap, only difference is the slot…

Downloads
254
Likes
85
Rating
5
P
PrintablesYoPrint3

Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure. Normal Version

Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…

Downloads
228
Likes
7
Rating
5
P
PrintablesKayakW

Thread Board Screw Poles

Made a shaft inside the M and F ends of the original design. Printable without supports because of a cone cut out inside the female end so if you print F down onto the print bed it won't need supports inside which altered the thread…

Downloads
215
Likes
30
Rating
0
P
Printablesmental808

Grow Tent Hangar Clip for 22mm Poles for AC Ifinity tents

I remixed this to fit 22mm grow tent poles which is commonly used in AC Infinity tents (among others). I printed this in PETG and it uses roughly 5.3grams of filament .20 Walls: 3 15% Gyroid

Downloads
215
Likes
22
Rating
0
P
Printablesjeffjewison

ACME (3/4 x 5 tpi) Threads for Painters Poles

Overview : I have several painter’s poles that adjust to various lengths. I’ve developed a number of attachments for them, but the ACME thread definitions in Fusion 360 are not compatible with the ¾” (075) x 5 tpi definition used for…

Downloads
203
Likes
11
Rating
0
P
PrintablesBelac

Volvo/Polestar Activity Key Shell

The battery in my key was dying, so rather than buying a new key, I cut open the shell and replaced the battery. I didn't really want to glue back together the original mangle shell, so I modeled a version that snaps closed. It's no…

Downloads
202
Likes
13
Rating
0

Poles

poles

Downloads
200
Likes
64
Rating
5
P
PrintablesEngkje3d

Thicker Polestar 2 Charger Snow Cover

This reduce the chance of snow building up around the charging plug. Printed mine in PETG-CF.

Downloads
193
Likes
12
Rating
3
P
Printablesdfense

Ski and Poles Clip / Ski and Poles Holder

Parametrized Ski Clip to transport skis and poles together, slightly over engineered ;-) Completely parametrized, therefore works for a wide variability of skis and poles, even elliptic poles and asymmetric skis (different width/thickness…

Downloads
192
Likes
35
Rating
0
P
Printablesmatti

Polestar 3 & Volvo EX90 Armrest Compartment Top Organizer V1

A basic organizer for the top of the Polestar 3 armrest compartment. The armrest compartment of the Polestar 3 is quite large but that is due to its depth. This means that it can easily hold longer items, but who does that in the armrest…

Downloads
190
Likes
14
Rating
0
P
PrintablesNormos

Polestar 4 Centre console Tray

The 4 parts consist of the basic shape and the 3 shapes that can be integrated into it. Supports must be printed for the radius files I used PLA This model fits into the Polestar 4 middle console The photos are the individual parts and…

Downloads
187
Likes
10
Rating
0
P
PrintablesFx137

Holder for Ski Poles

Holder for Ski Poles Printed without supports on Prusa i3 MK2.5 In PLA

Downloads
186
Likes
49
Rating
5
P
Printablesliqwid

Spring-action Butterfly V-clip for Attaching Maintenance Accessories to Swimming Pool Poles

If you have ever maintained a swimming pool you will be familiar with this type of clip. I needed replacements and ended up designing my own. My priorities were durability and printability. I carefully chose the dimensions to make sure my…

Downloads
185
Likes
18
Rating
5
P
PrintablesNormos

Tablet holder back seat Polestar 4

I have designed a holder for the Polestar 4 where a tablet can be attached to the rear seat. Unfortunately, it's a bit tricky to print because of the ball. Any holder from the trade for a ball size of 16.8 cm (is almost standard) can be…

Downloads
180
Likes
8
Rating
5
P
PrintablesAdamR

AirTag holder for keyring (with or without Polestar logo)

I wanted an Air Tag holder for my keyring with a Polestar logo. After being dissatisfied with many clip-together models, I made one that is screw-on – Very secure! Strong, heavy duty, rugged. The white part of the Tag protrudes slightly…

Downloads
174
Likes
21
Rating
0
P
Printablessonnyc

Street Signs Base and Poles (Remix)

I liked JamesThePrinter 's design, but I wanted a little versatility. So, I reduced the base diameter from 135mm to 100mm, and extended the pole to be taller. I have provided many options to customize your base and pole sizes.…

Downloads
168
Likes
33
Rating
0
P

Rubber tip caps for «Nordic Walking» poles

Rubber tip caps for «Nordic Walking» poles. To be printed with soft material (TPU, NinjaFlex, …).

Downloads
167
Likes
12
Rating
5
P
PrintablesSteve Lupton

Phone Retainer - Polestar 4

Retention cradle to keep a phone in the centre of the charging pad and to prevent unwanted rear ejection under acceleration. Should fit any current 'non-Max' iPhone and any 'normal' Android handset. Max dimensions 79mm x 160mm

Downloads
166
Likes
5
Rating
5
P
Printablesdb3jhf

Support "UFO"-Ring for fiberglass poles / portable antenna tower

Support Ring for Amateur-Radio antenna poles. Our working title was "UFO-Dish". It's purpose is to fix and stabilize the fiberglass tower during use. We tested serveral copys and use them during fieldday-events. There're versions with…

Downloads
161
Likes
30
Rating
0
P
Printableschking

Wire Shelf Wedge for 1 inch Poles

Replacement wedges for the 1 inch poles of wire shelving. Print Settings For each pole print 2 wedges. Print vertically Print with supports For best results use the 3MF file with the proper settings included Either PLA or PETG will work…

Downloads
155
Likes
19
Rating
0
P
PrintablesYoPrint3

Polestar 4 Charging Cradle Retaining Lip – Large Version for Big Phones!

Polestar 4 Charging Cradle Retaining Lip – Large Version for Big Phones! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This…

Downloads
154
Likes
4
Rating
0
P
PrintablesMatthias Tytgat

Polestar 2 middle console organizer

Never saw much use for the cup holder in the middle console of my Polestar2. So I decided to design a piece to organize stuff I use and need more frequently. There's room for: 4 charge cards A coin for shopping cards. (modelled after a 2…

Downloads
150
Likes
15
Rating
0
P
PrintablesFrankkieNL

iPhone 13 Max holder for Polestar 2

Download the required hook from here: https://cults3d.com/en/3d-model/various/polestar-2-cup-holder-mroek

Downloads
143
Likes
14
Rating
0
P
PrintablesKB9RLW

Anderson Power Poles shell

There are four sizes. Small, for TrueSDX power cable, Small twin, for Yaesu FT-817 or similar size cord, 12 gauge and 14 gauge twin power cords. They are in half shells, so print two of the size you need. They take M4x12mm screws.…

Downloads
140
Likes
35
Rating
5
P
PrintablesStarForge

28mm WW2 Military Canvas Tent with Rope Ties and Wooden Poles StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
138
Likes
12
Rating
0

Clutch forTrekking or Nordic poles

Replacement clutch for trekking or Nordic poles for poles with a diameter of 16 and 18 mm You can print this useful tool if it breaks or gets lost For strength, increase the number of perimeters to 4

Downloads
136
Likes
60
Rating
5
P
PrintablesKevin Grøn

Polestar cupholder and armrest

A few minor changes was made to the original model. When i first made the cupholder, I had very thin walls in some areas. One guy had put up some pictures of the location. I made the walls a bit thicker which fixed this issue. Made the…

Downloads
135
Likes
9
Rating
0
P
Printablesjgentry

Volvo EX90, Polestar 3 Key Tag Case

Update: 12/21/2024 Added a little extra room to the latching part of the case. Previously it was difficult to get the key tag in and out. You may need to still file down the bump if it is still too difficult to remove. The key tag that…

Downloads
133
Likes
16
Rating
4.75
P
PrintablesJose R

Pool Accesory Holder for Deck Pole (skimmer nets and poles)

This pool pole holder is meant to help you organize pool pole based accessories vertically on a deck pole. It has spaced out holders for 3 poles and fits tightly to a deck pole. Note Before Printing: Please measure your deck post and pole…

Downloads
127
Likes
30
Rating
0
P
PrintablesBBoyd

MLok Relocation Bracket PowerPoles

This fits my MLOK cage I designed for my radio. It will relocate a pair of Anderson Powerpole connectors. Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage MLok Relocation Bracket BNC -…

Downloads
126
Likes
18
Rating
0

Clip for ski poles

Фиксатор лыжных палок: Ø 16 мм, Ø 14 мм, Ø 10 мм.

Downloads
123
Likes
12
Rating
5
P
Printableschesamo

Improved Improved poles for Crochet Granny Block

A very very simple remix of a model that's already itself a remix. Print as oriented with your chosen infill; 100% infill makes for very strong pegs. You'll have to print the original model in order to make use of this model.

Downloads
117
Likes
10
Rating
5
P
PrintablesDanZbo

Trekking poles basic clip

Info Simple clip with 16mm diameter (I also made clip with hole for ruber - as fuse). I also made split pin with 4 x 20 mm. Note: Reducing the clip size in the slicer should be fine to use on a smaller diameter. (not tested) Print…

Downloads
116
Likes
29
Rating
5
P
Printablesvictorprost

Hiking poles cap

This hiking pole cap was made to fit the black diamond distance FLZ hiking poles and replace lost standard rubber tips such as these decathlon poles. The cap inner diameter is 10.1mm and the hole height is 28mm with a snug fit on the…

Downloads
111
Likes
28
Rating
5
P
PrintablesMojo Wu

Polestar 2 17mm ball mount phone base

This is a 17mm ball head mount for the Polestar 2 car's central control. It can be easily inserted into the ball head base without the need for adhesive, making it quite stable. The standard 17mm ball head allows for easy connection to…

Downloads
106
Likes
11
Rating
5
P
PrintablesWilts01

End caps for fishing poles

The end caps of my 10m and 7m fishing poles had cracked so I designed and printed these replacements. The larger one for my 10m pole has a thread of ANSI 2-18 UNS, the smaller one for my 7m pole has a thread of ANSI 1 5/8 - 16 UN. I…

Downloads
105
Likes
37
Rating
3
P
PrintablesNormos

Polestar 4 Mobile Key Cup Holder

I have designed a key and mobile phone holder as a cup holder for the Polestar 4. This has space in the smaller front holder, whereby the mobile phone is still clearly visible in this position ;-). Have fun

Downloads
102
Likes
8
Rating
0
P
PrintablesDabovos3D

Flower support poles

Hello there! Flower support rods that are easy to connect. Instructions for connecting the parts can be found in the photos. The only place where supports are needed is here: For outdoor use, I definitely recommend PETG or a more…

Downloads
102
Likes
20
Rating
4.75
P
PrintablesFagge

Polestar 2 Key case

I replaced the soldered battery with a battery holder for CR2032

Downloads
102
Likes
8
Rating
0
P
PrintablesSuchtzocker

M20 support for 16mm grow tent poles

Supports 20mm Installation PVC Tubes on a common 16.1mm growtent pole. Made this to stop my tent from getting sucked together by exhaust fan pressure Printed with 0.4 Nozzle 0,2 Layerheight Polymaker ASA No Support 100% Infill Please be…

Downloads
102
Likes
9
Rating
0
P
PrintablesAntoDelG

selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section

selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…

Downloads
101
Likes
5
Rating
0
P
Printablesalain

Protectioncap to cover lead acid battery poles

when handeling those heavy lead acis batteries it comes handy to cover the poles to protect against short circuits.

Downloads
99
Likes
13
Rating
0
P
PrintablesmangoDB

Parametric Cable Clip for (Monitor Arm) Poles

Parametric Cable Holders for Various Diameter of Poles You can adjust: Pole Diameter Holder Thickness Holder Height Width and Depth of the Cable Holding Section The Chord Length (Entrance Size) and Tightness (Tolerance between the Pole…

Downloads
95
Likes
13
Rating
0
P
PrintablesJonesy

ANNEX SMART POLES

Got sick of Setting up my annex on my camper trailer. Came up with this to put on the end of poles. Join poles together and have them on a hinge. Have included different types as I'm not sure which way I'm planning on going but they are…

Downloads
94
Likes
17
Rating
0
P
PrintablesMD3D

GoPro-Mount for poles or diving tank

The idea for this GoPro-Mount was born while leading dives and me wanting to take video backwards to get footage of my buddy behind me. This lead to this mount for a diving tank (regular 80cuft aluminium or 12l steel) and to prevent…

Downloads
93
Likes
13
Rating
0
P
Printablesmkosiedowski

Trekking poles clip for backpack shoulder strap

This clip mounts onto a shoulder strap of a backpack and can hold two trekking poles to allow you to free your hands for a while - ex. when you want to take a photo Works with shoulder straps up to 80mm wide. Prints in place, best with…

Downloads
92
Likes
19
Rating
0
P
PrintablesMacLemon

LED Strip clip for pipes or poles (parametric)

This is a fixture clip for easy and quick mounting of an LED strip to a pipe, like a camping pavillion. This also allows for easy removal of the strip before teardown without having to fiddle around with cutting tape off of a pole. It's…

Downloads
91
Likes
9
Rating
5
P
PrintablesLMCEI

Double Hook Fence Bracket for Swimming Pool Poles (Single hook now available)

This is a pool post fence bracket created with Fusion 360 which is very useful if you have a metal fence with two top 25mm x 25mm tracs separated by 124mm. The thickness is designed in such a way that the bracket can be installed on both…

Downloads
90
Likes
18
Rating
5
P
Printablesvidision

Trim Rings for Lally Poles, 3 sizes

A split ring meant to be place at the base of a lally type support pole. It can be finished with sealant and/or paint.

Downloads
89
Likes
4
Rating
0
P
Printablesnurgmurgl

Polestar Keychain

Polestar Keychain w/ Logo, hollow design Bicolor revommended

Downloads
87
Likes
13
Rating
5
P
PrintablesAndrás Sümegi

Geocaching Hook for Biltema Poles (Angel Caches)

Universal hook for Biltema / Angel-Cache fishing rods. Unlike standard screw-in or glued hooks, it requires no modification of the rod. It is intended for a 7–8 m carbon-fibre telescopic fishing rod with the last segment removed. The hook…

Downloads
87
Likes
5
Rating
4
P
PrintablesiPeel

Polestar 2 parcel shelf holder plug

The little rubber bung thing on the end of the parcel shelf lace snapped when it got caught on something in the boot ( trunk ). I designed this little plug so that the lace can be threaded through it then shoved back in the rubber bung,…

Downloads
87
Likes
7
Rating
0
P
PrintablesKubastel

Printable poles for modular shoe rack

For a basic Version 1, 3 level shoe rack (like that on the cover photo) you will need: 4x Pole 50mm.stl 8x Pole 100mm.stl 6x Pole 130mm.stl 9x Pole 250mm.stl Print them on their sides for extra strenght.

Downloads
85
Likes
13
Rating
0
P
PrintablesVA3NCA

EcoWorthy 8Ah LiFePO4 Battery Cap with Anderson PowerPoles and Fuse

ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…

Downloads
83
Likes
23
Rating
0
P
Printablesvidision

Trim Rings for Lally Poles, 3 sizes (2 piece w/ pins)

The alignment pins are on the small side and meant for use with glue or epoxy. If you want a more snug press fit, scale up a couple percent!

Downloads
81
Likes
15
Rating
0
P
Printablesneophrema

Tent spare part. Foot for poles.

This is used to hold the tentingpoles in place. You can adhere it to the tent with a screw and Nut. Its very durable and worked fine for me. If interested I'll tweak the model; a Drainage hole is needed for raining conditions. It's quite…

Downloads
81
Likes
8
Rating
0
P
Printablesdgrosserhode

Trekking Poles (Black Diamond) Tip Protection

This tip protection is used when your polls are traveling in your duffle or suitcase. Its meant to protect the duffle or suitcase from tarring or puncturing. This tip protection is made to be threaded onto poll.

Downloads
80
Likes
3
Rating
0
P
Printablesucito

Helinox end cap with rope clamp for rubber rope for 17,4mm poles (Chair One XL, Swivel Chair, Sunset Chair, Savanna Chair, Bench One)

If, like me, you are a little clumsy and, for whatever reason, pull too hard on the chair leg and end up breaking the plastic part, you will find a replacement part here to reassemble and use the chair. Fits the Helinox chairs with the…

Downloads
80
Likes
9
Rating
0
P
PrintablesPillow Thoughts

Komperdell Stockteller / touring poles baskets

Komperdell kompatibler Teller für Stöcke Ich empfehle die Teller aus TPU zu drucken

Downloads
77
Likes
6
Rating
0
P
PrintablesYoPrint3

Polestar 4 Dashboard Holder for Saphe Drive Mini

Polestar 4 Dashboard Holder for Saphe Drive Mini 🚗✨ Keep your Saphe Drive Mini securely in place with this custom-designed dashboard holder made specifically for the Polestar 4 . It fits perfectly between the ambient lighting and the…

Downloads
74
Likes
1
Rating
3
P
PrintablesNikdfish

In-line Fuse Block for Anderson Powerpoles

An in-line fuse block, fusing both positive & negative lines, for circuits using Anderson Powerpole connectors. 0.25" female spade terminals are used for the fuse holders. This model uses standard bladed fuses, not mini. Short lengths of…

Downloads
74
Likes
15
Rating
5
P
PrintablesStarForge

28mm WW2 Military Canvas Tent with Rope Ties and Wooden Poles StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
73
Likes
9
Rating
0

Clip-On Corner Shelf for 4" Pots (16mm Grow Tent Poles)

Description: I needed a simple way to give cuttings and small plants more light in a crowded tent, so I designed this clip-on corner shelf. It snaps onto standard 16mm tent poles and holds a 4" pot securely, turning unused corner space…

Downloads
72
Likes
26
Rating
0
P
PrintablesAenar

Flag holder wall 20 mm/0.8 inch flag poles

Wall mounted. 100% infill. Use screws.

Downloads
71
Likes
2
Rating
0
P
PrintablesMartin_au

Netatmo Rain Gauge mount for poles

Remixed from https://www.thingiverse.com/thing:2822754/files and https://www.thingiverse.com/thing:1635934/files Thanks maciii and denisvic

Downloads
70
Likes
7
Rating
5
P
PrintablesLeo

Snow plate for ski poles

A replacement Snow plate for ski poles. Is plugged in the pole. Print without supports. Print settings: 0.20mm speed 50% infill no supports no edge Thanks for download and like. Leo

Downloads
69
Likes
12
Rating
4
P
PrintablesJuro Leho

Langlauf Nordic Walking Ski Poles Holder / Clamp

Langlauf Nordic Walking Ski Poles Holder / Clamp V3 - D15mm / D12mm - up to 47mm V2 - D16mm / D13mm - up to 50mm PETG is maybe better for cold wetter and more flexible.

Downloads
67
Likes
7
Rating
5
P
PrintablesFumundaSoup

Adapter - Lucky Duck Decoy Spinner to Mojo Ext Poles

Pretty simple, but functional! Originally, I looked for an adapter that someone else has made. I'm very new at this printing adventure, so I took it upon myself to start my journey to create a functional part I will use. This adapter…

Downloads
67
Likes
10
Rating
0
P
PrintablesBeardface McGee

Connector for wire shelving rack poles

This simple connector is to replace the slip fit type that came with my shelving unit. I included the step file to resize as you see fit.

Downloads
63
Likes
5
Rating
0
P
Printablesbunnyology

Rubber cap for Hiking Poles

The rubber caps of my hiking poles always got lost easily. Printed in TPU, these replacement caps fit tight and until today sustained well more than a year of heavy duty hiking. Suitable for pole tips with a diameter between 12mm - 15mm.

Downloads
62
Likes
14
Rating
5
P
PrintablesTedGhast

Telegraph poles

Telegraph poles for wargaming, to decorate your worn torn tabletop game. Made for games like Fallout, Mutants: Zone Wars, This is not a test, Last Days, Zona Alfa and others. Standing and fallen. Find all my building on Cult3D: TedGhast…

Downloads
61
Likes
7
Rating
5
P
Printablesfshiper

tip bumper for Leki Sherpa poles

tip bumper for Leki Sherpa poles

Downloads
61
Likes
4
Rating
5
P
PrintablesYoPrint3

Polestar 4 Charging/Credit Card Holder – 5 Slots (Fits Driver's Door Side Storage)

Polestar 4 Charging/Credit Card Holder – 5 Slots (Fits Driver's Door Side Storage) Looking for a neat and organized way to store your charging cards or credit cards in your Polestar 4? This custom-designed 5-slot card holder fits in the…

Downloads
60
Likes
8
Rating
0
P
Printableslei xu

极星(沃尔沃)防水小钥匙可替换外壳,Polestar (Volvo) Waterproof Small Key Replaceable Shell

Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…

Downloads
57
Likes
8
Rating
0
P
PrintablesOE5EEP

Screw Cap for Telescoping Poles (Replacement)

Telescoping fibre-glass poles were originally designed as fishing rods, but they are also used by radio amateurs to erect antennas in the field. A popular brand of these poles was sold by Lambdahalbe in Germany. Owners of such a pole…

Downloads
57
Likes
4
Rating
5
P
PrintablesYourLocalSwede

Polestar Keychain

Polestar Keychain. Made it for my dad cause he drives a Polestar 2 so why not upload it for other people to use.

Downloads
55
Likes
3
Rating
0
P
PrintablesKrzysztof

Clip for Black Diamond Trail Trekking Poles (16 mm)

Clip for Black Diamond Trail Trekking Poles (16 mm) A practical clip designed to hold together a pair of Black Diamond Trail trekking poles or any other poles with a 16 mm diameter . It makes transport and storage easier by keeping the…

Downloads
52
Likes
4
Rating
0
P
Printablesucito

Helinox Ball Foot for 17,4mm poles (Chair One XL, Swivel Chair, Sunset Chair, Savanna Chair, Bench One)

Remix of the great model from Peter H with adapted dimensions to replace the original feet on the Helinox chairs with 17.4mm poles. In my case they are used on my Swivel chair , but according to Helinox's description they should also fit…

Downloads
52
Likes
14
Rating
0