Airless Ping Pong Ball
NEW 3.0 revision now available on MakerWorld! https://makerworld.com/en/models/426056
- Downloads
- 22,007
- Likes
- 4,057
- Rating
- 4.72
Counting matching models…
NEW 3.0 revision now available on MakerWorld! https://makerworld.com/en/models/426056
NEW 3.0 version now available on MakerWorld! https://makerworld.com/en/models/426056 This is the 2.0 version: Now with more bounce, stronger, thicker, more fun! Prints without supports for easier post processing. Print with a 5mm brim,…
An airless ping pong ball! Seen with some of my other ping pong machinations ( https://makerworld.com/en/models/166872 & https://makerworld.com/en/models/207809 ). Legal weight is theoretically slightly high (based on design program and…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
I needed a way to hold my sponges that allows them to drain and dry easily (not stacked up on top of one another), so I designed this quick model. It holds a scrub daddy (I cannot recommend this enough), a regular sponge, and another item…
A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Sponge Bob Square Pants. Removed version with thin legs. Fixed multiple shells. added .3mf and .gcode (10/6/2023)
Kitchen sponge holder that attaches to the tap. Tested on PLA and PETG materials. Support is required, but is easily removed after printing. Designed for a 2.5 cm diameter tap and a 6 cm x 3 cm sponge. Print instructions - 0.4 mm nozzle -…
Vertical 2‑Sponge Holder A compact and practical vertical sponge holder designed to store two sponges while keeping them dry, organized, and easy to access. The vertical layout improves airflow and helps sponges dry faster, reducing odors…
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3033103
A free file to help organize your kitchen sink.
You can print this ping pong paddle with custom infill types in your slicer. Use 15% infill. Make sure to set top and bottom layers to 0, with this way it will be "Airless" and it makes your paddle silent I printed with three color…
17.02.25: New added model in files: Drainage Container - Just put it under the sponge holder (see pictures!) Say goodbye to messy countertops with this modern-designed sponge holder! Featuring a unique honeycomb base, it allows your…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
A soap/sponge tray which allow for airflow and fast drying.
So another rather minimal soap / sponge holder… I needed one with a specific and rather larger size of the underneath drawer to hold a soap savior (a special request from my family). Bottom drawer size: H 10 x W 85 x L 130 mm Two version:…
I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining
This is a functional, full-sized ping pong/table tennis racket by [https://www.thingiverse.com/juholga/designs](Juho Jalava on Thingiverse). I've tweaked the design slightly to make it print well on my Prusa i3 MK3S+. It also serves as an…
Please , if you don't use your head, save your time and filament, thanks materiál: PETG without supports infill: 5% layers: 0,2mm (but top of : Bhlava, Boci, Bduhovky, Bcoky, Bret - 0,07mm) - Bzuby, Bpasek and Bramena need to be glued -…
Practical sponge box with a drainage groove to keep your sponge dry and hygienic. Compact design saves space at the sink and fits any kitchen.
The funnel for your beer pong game. I have seen many of these funnels for sale (files or already printed) and thought to myself, I can construct this myself and publish it for you for free. It is designed for almost all cup sizes and can…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
Keep your counter clean with this tray, designed to move excess water towards the spout into your sink.
good working airless pingpongball
Straight from Bikini Bottom's Jellyfishing fields. This guy was inspired by the octopus flexi toy Layer Height: 0.16 Infill: 10% Use CA Glue to Connect parts
I absolutely enjoy the Kitchen Spongeholder design by pdiqlosis . However, not all the sponges and sinks are created equal. This is why I created a parametrizable version. Bonus feature: you can choose on which side do you want the drain…
A small sponge drain rack, sutable for two sponges and two mini brushes. Supports are required when printing
A compact kitchen holder designed for storing a dish sponge and hanging a kitchen rag or dishcloth. The base includes a removable grate with space underneath for water to drip and collect, helping the sponge dry more easily after use.…
We needed a place to allow our dish sponge to dry. So… Here it is. I recommend printing this on the back face (shown below) requiring no supports.. I printed this at .2 mm layers.
Patrick 15 cm - 1 Parts Des Cadeaux pour Noël 2020 ! https://youtu.be/JpHoKxPGJoo Facebook : https://www.facebook.com/B0DY3D Team BODY3D : https://www.facebook.com/groups/492474174608397/ Instagram : https://www.instagram.com/body.3d/…
Two part print, can be printed in any material. Lower heat filaments might warp in the presence of hot water, probably not dishwasher safe unless done with low temperatures. A lower layer height is recommended to avoid spots for water to…
Simple sponge holder for kitchen sink. Very easy to print and keep your sink organize. Please feel free to download the version that you need. Happy printing and enjoy my design of the kitchen accessory.
Share a photo of the printed model 🗿 Remember to give me a like 👍 https://www.instagram.com/kuleshow/
Dust filters are especially useful if you have some dusty spools of filament that you want to print from or if you have pets at home. It protects your nozzle from clogging. This model prints without supports (even the nose was printed…
A very nice Sponge Bob's pineapple house for fishes to live in. I made it as accurate as possible to replicate the same house shown in the cartoon, but I'm hoping that fish won't get lost in there. Should be printed in Orange/Green, but I…
📝 Description Simple and practical sponge holder designed to keep your sink area clean and your sponge dry. honeycomb grid helps water to flow freely while keeping the sponge elevated. This helps it dry much faster instead of sitting in…
I got three versions of dishes to suit your convenience: one for simple yet efficient (soap1.stl) and two others that come with bases with built-in drainage to place next to your sink or bathtub. For the two bases you have the option of…
This sponge holder can hold up to three typical sized dish sponge in a vertical orientation. The sponge holder measures 90mm wide and 130mm deep. Each sponge slot can accommodate 30mm thick sponge. It is intended for use with an…
This is the second version of the design I made previously. The first variation is more intended for 3D printing with resin and subsequent painting with acrylic paints 🎨🖌. 🫧🧽 The design is optimized for color 3D printing. The arms have…
Here's a 6 color remix of Cipis' multi-material remix of the original sitting Spongebob model by Alsamen. This version is built for Bambu Lab X1 with 2 AMS units and was saved in Bambu Studio. Here are the changes I made: Changed sock…
Homer può essere stampato in un colore o fino a 4 colori (la parte marrone del viso sembrava troppo piccola per creare uno strato in più, quindi l'ho aggiunta allo strato bianco; basta colorare il pezzetto). @Preferisco stamparlo in…
Very important print at 200% scale
Bist du es leid, die Becher manuell zu befüllen und dabei wertvoll Zeit zu verschwenden Bist du es leid, dass nach einigen Runden das Befüllen zur Tortur wird? Kiwi12_34 bietet dir eine Erlösung mit dem BpK befülle die Becher in noch nie…
Printer: Ender 3V2 Rafts: Doesn't Matter Resolution: .2 Infill: 20% Filament brand: Replitech Filament color: various Filament material: PLA
This ping pong ball is fully 3D printed! This model is based on the popular Airless Basketball design by Wilson - in the form of a ping pong ball - it bounces well and is totally playable with! Print settings 2-4 walls 20-30% infill PLA…
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
Surprised Buddha started feeling lonely on the top without his best friend. So now SpongeBob has converted religion and is now on the same road of enlightenment as Surprised Buddha Patrick. Help them along their journey by downloading…
This is a simple Beer pong funnel which I designed myself. Fits just right onto 10 standard cups and can be printed on a 230x230mm bed (e.g. Ender 3 etc). You just need to rotate it a bit in the Slicer so it uses the least amount of space…
Simple holder made to help drying of the makeup sponge. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Cubic Filament: Fiberlogy PETG Transparent Category: Bathroom
Sponge Holder. PLA or PETG. Might work better if you put some supports in for the holes. Some are not perfect but it printed well enough without them. PLA and PETG not dishwasher safe. Melted in the dishwasher. ASA, ABS dishwasher safe.…
SpongeBob Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
It is an octopus with Spongebob's head on it. The nose needs supports. I also added a multicolor version.
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson https://www.thingiverse.com/thing:4575259 **This design…
simple airless ping pong ball
Spongebob Bikini Bottom Lamp.
This is a simple kitchen brush and sponge holder I designed to fit my regular accessories I had lying around. It can hold: A typical kitchen sponge of approx. 12cm x 7cm A sink brush with 5cm diameter (holder is 6cm so an even larger…
This 3D printed sponge caddy is the perfect accessory for the Scrub Daddy sponge. Designed to keep your Scrub Daddy within easy reach while you’re washing dishes or cleaning counters, this holder is crafted to securely hold the sponge and…
For long time now, we've been using the Scrub Daddy line of sponges in our kitchen. They've typically either been set on the edge of the sink or (on occasion) stuck on the handle of the faucet using the ‘mouth’ of the sponge. I searched…
This is a simple, elegant wall mounted rack for storing table tennis balls. The balls are held securely and won't be dislodged by wind if, like ours you have them stored on a verandah, but they are easy to remove and replace one at a…
You're the best ping pong player around. Not that other person. You know the one I mean.
Sponge holder 27 mm wide; 90 mm long; 40 mm high ( inside dimentions)
ScrubDaddy sponge holder with drain tube.
This is the same as the original adjusted to hold a thicker sponge. The original has been in my sink for about 3 months. It seems to be holding up well. I printed this in PETG at 0.2mm layer height, 3 walls, and 10% infill. The Fusion 360…
Bottom of the basket was elevated with feet to prevent water accumulation. Enable support (on build plate only) when printing.
🦠Let your fishes swim through Plankton's “Chum Bucket”!🦠 The walls are 2mm, requiring minimal filament usage. No supports required for the handle. Supports are needed for the door frame and possibly for the text (with proper printer…
Spongebob skeleton | no AMS Give a spooky twist to a classic character with this Skeleton Sponge inspired 3D model 💀🧽 This unique design reimagines the iconic sponge in a skeletal style , combining humor and Halloween vibes into one…
Container for makeup brushes, makeup sponge and/or other beauty tools. Made in similar style as my Cotton pad/tips holder
🪼 Transform your Jellyfish Swimming - Mechanical Interactive Art into a SpongeBob-style jellyfish! This playful variation brings a splash of cartoon charm to your setup, with vibrant spots and a dome that can be printed in two colors.…
Prints in one piece with no supports! You will need to add sponge or filter floss media to the base around the annulus, and then an airline to plug into the top. I'm currently testing this in my fish tank now!
Another endeavor in "sculpting" spongebob characters in Blender. Some booleans, some subsurf modifiers, and the all-important singular ice cube, all bodged together into this somewhat unstable gentleman. I recommend using tree/organic…
Sponge holder with drainage holes. Holes on all sides for better air circulation and prevents mold! Easy to clean.
I needed a sponge holder for the sink. You need to print 2 parts and then connect them. it goes on tight but holds strong. Printing instructions: the hook printed on the edge with the big surface perpendicular to the print surface…
Patrick Star : Sponge Bob I may have done him before.. But here is another one. also note that the precompiled gcode is for ASA… that was an oversight.
Want to live healty? Start with the details! Your little yellow kitchensponge propably contains more Bacteria than your hole Bathroom, but you're cleaning your dinnerplates with it! With this little device, your sponge can dry much more…
A kitchen sponge caddy that will fit over the bridge between 2 kitchen sinks, designed to hold a sponge/cloth on each side, allowing the water to drain away and the sponges to dry out for a safe and healthy kitchen.
Check out my Amazon Page to see what kind of gear I use to make these models! A bed for your sponge! I printed this on a Lulzbot Taz 6 using Amazon Basics PLA filament.
A sponge/soap tray with a funnel to drain excess water from the sponge or soap while drying. Tray size: 10.5 x 11 x 6 cm Available in multiple variants for aesthetics and easy maintenance. Your feedback is highly appreciated.
Airless Ping Pong Ball Print tips: pla no support needed add some brim to the bottom
Sponge Bob Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Soap/ Sponge Holder + Drip Tray allows for easy drying with a self-draining design and removable honeycomb lid design for easy cleaning. Print Settings: Layer Height - 0.2mm Wall Loops - 3 Infill Density - 15% Support - Auto Tree Printed…
--------------------------------------------------------------------------------------------------------- Be sure to orient the model so the large overhang is facing the print fan to avoid a saggy overhang.…
📝 Description (Detailed) This is a custom-designed Boatmobile inspired by the iconic vehicle from SpongeBob SquarePants. The model captures the playful proportions and details of the Bikini Bottom boat car, making it perfect as a display…
The paddle is composed of three parts. The paddle itself is made of pla and the grips are made of tpu (the softer the better)
The tray with a dish brush holder is only 15 cm wide in order to be able to fit on a 21x21 buildplate, and therefore two versions of the stick and grid exist. 15 and 20 cm in the name of the models refers to the height of the rods.
¡Sumérgete en el mundo de Fondo de Bikini con estos detallados modelos 3D de las icónicas casas de Bob Esponja, Calamardo y Patricio! Estos diseños están listos para ser impresos y son perfectos para fans de todas las edades.…
cartoon characters spongebob squarepants 6 color and 4 color inc in 3mf file stl also inc print face up
This is a lower-profile guitar pick dispenser that can hold several picks. Print the 3 parts; Take a cleaning sponge and cut it in a triangle shape (it will act as a spring that pushes the picks out); Put the triangle-cut sponge in the…
To print the main SOAP DISH BODY part use Fuzzy skin to get a nice texture. I suggest these settings if you want light texture: Fuzzy skin: All walls Fuzzy skin thickness: 0.15mm Fuzzy skin point distance: 0.25mm To print the INFILL STYLE…
Keep your counter clean with this dish wand & sponge organizer. It will hold both round or rectangle sponges depending on which anti-slide pin you use. Excess water is drained back into the sink and not left on the counter. Easy to print,…
The model can be placed on a 10-cup beer pong formation to fill all cups with approximately the same amount of water at the same time. For reasons of hygiene, beer should not be used and the filled cups should not be drunk from. You can…
Since I only remixed the bottom, the top part can be downloaded by the original creator :) Remix of:
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A cute 3D printed figurine of Gary the Snail,…