Counting matching models…
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
Here is my Boba Fresh/Re Armoured/Post Sarlacc Helmet. It's designed on the Side show helmet with the smaller turn signals. It is sized quite small at 100% so i'd suggest going to 103-105 for a normal sized head and 108 for larger sized…
Here's a tiny pergola for your climbing plants! Provide succulent shade for your succulents! This version prints faster than my original model because the four corner posts print horizontally instead of vertically, and that means that the…
RC generic body posts, 4 different lengths, 8mm diameter (quite large), fairly sturdy. The title sums it up mostly. 92mm, 76mm, 55mm and 45mm, should be generic enough to use anywhere where the body post doesn't have to slot into any…
This model is simply 2 different models assembled in Orca Studio. I wanted stackable sanding disc holders, but I always wanted some guiding posts so I could press the sander down onto the discs and end up with aligned vents. For this…
Update December 28, 2024: Per request, added a PrusaSlicer 3MF file (and a g-code file for the Prusa MK4) with raised text that says “CALIPERS” - with a color change for the text and then another color change to go back to the original…
A collection of screw posts / pegs for M3 screws. If you need a quick way to make mounting points in your own designs. These come in Round, Half-Round, & Square options, in *20, *16, *12, *8, *6, & *4 length. If you would like different…
Simple post to hang things with the Screwiverse thread
This Geocache Container was designed to be placed onto a 60 mm pipe post for e.g. road signs. The container can hold Standard Logbooks for PETlings as well as a pencil. Size: inner Diameter of Cap: 60,8 mm Container inner heigth: 110 mm…
Just some Low Poly Lampposts :) Fits well with the Low Poly People Pack: https://www.printables.com/model/811500-276-human-low-poly-people-pack-architectural-model
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
Supports for mounting 1-1/2" screen cap as a wall around a slot car track. The UPC tag for the screen cap (white wall in the photos) is shown in the pictures. Commonly available at home improvement stores. The fencing is a plastic leaf…
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
I coudlnt find any decent front sights to print so i decided to make my own and its roughly based on an existing design. This is still the V1 and if theres any changes that people think I should make then ill be more than happy to hear…
Eine Abdeckung/Abdeckkappe für Zaunpfosten 67x67mm (Innenmaß)
Bei der Besichtigung des Wagens 905-153 hatten wir den eingebauten Arbeitsplatz vermessen. Bei der Überarbeitung des Modells (Links: H0 , TT ) habe ich den Arbeitsplatz nachgebaut, auch wenn man ihn kaum sehen kann. Zum leichteren…
Tractor Supply sells lots of fence posting for creating welded-wire fences (for around animal enclosures). So we needed to make a new fence for our goats. One of whom keeps going over the fence, so we needed to add an electric fence to…
I wanted to replace my mailbox post and thought it would be nice to be able to put my address numbers on the post. You can just buy stickers to put on the box, but I was looking for something different. I liked the idea of engraving the…
These post mounts were originally designed to attach a bird nesting box to a post, as in this print : https://www.printables.com/model/832468-bluebird-housenest-box However, the basic design can be applied to other prints, provided that…
For an electronics project with some kids i needed a platform to built with the ESP32. So I came up with this version: big enough to fit two MB-102 boards (63 pins long) If you place the ESP32-dev board in the middle, you have 3 pins left…
This is an electrical fence insulator that can be used on existing fences using T35 poles. The insulator slides on the T35 profile, and can be fixed with a wire using the groove. It should be printed in any material that will support…
I have been using monstertail loom to make little rubber band flowers. However, the loom is too large for the flowers and overstretches rubber bands, causing them to eventually fail. I really liked the posts design on the monstertail by…
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of things. It can be stretched along the long axis, scaled, etc.for a variety of uses. The top edges are chamfered at 45…
Needed something to store two vehicules in one Kallax/Expedit shelve. Hardware required : 12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion) 4 m3 screw Print one master…
This is a custom body post designed for the K989 RC car. The front and rear body posts are slightly different to accommodate the front shocks. They are designed to be used with a neodymium magnet with a diameter of 10mm and a height of…
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
Standard R/C Server Mount Posts These are simple Standard size Servo Mounts for custom applications. Useful for Pan Cars, Crawlers, Robots, or whatever. I made them for my RC10, and have used them on a Crawler as well. They have a hole in…
Mini goalposts with a football
This base is to fit on miniature scale lamp posts commonly ordered from China. Includes channels for wires in the bottom
Models Two models are included, one with cylindrical prongs and one without. If your post does not have appropriate holes to mate with the four prongs on the under side, choose the “No prongs” model. The post extrusion profile that works…
magnetic body mounts that fit yokomo posts. Use existing body pins to secure to body posts. mounts them selves allow quite a bit of adjustment in height. These things are rough I just made them quick and sloppy as a stop gap but dammit…
Das Modell ist unten geschlossen für einen stabileren Aufbau The model is closed at the bottom for a more stable structure Printed on K1C with support standing Gedruckt auf K1C mit Support stehend
Pretty straight forward. Maybe better detail with a smaller nozzle but 0.4mm does an ok job.
This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…
Short body posts to fit wider range of bodies. STEP file included. Needed shorter body posts but didn't want to cut the original ones. Best printed lying down with supports, 0.12mm layer height preferred. Should fit with minimal post…
Replacement front and rear body posts for the FTX Bugsta RC Buggy. I know the Carnage has the same part but I am not sure that the holes are in the same place, looks the same chassis but I do not have one to test, perhaps someone could…
I needed extended body posts so I could get a nitro truggy body to fit on my (electric) Kraton 4S V2. The new body I purchased had some interesting cut lines that made it difficult to get the body clips to go through in the rear (due to…
I really loved this hotrod body Open RC truggy HOT ROD body (for testing!) by mochr | Download free STL model | Printables.com Made by @mochr And i wanted it for my cramer truggy, so i made som body posts for it. I made them out of TPU so…
I purchased some genuine Axial SCX6 body mounts to go with my Pro-Line Racing Cliffhanger body. The body mounts turned out to be a bag of junk, so I decided to design and print my own mounts instead. I designed these for use with the…
Body posts for Tamiya DT-03 Neo Fighter / Racing Fighter I added the original length and a shortened version that fits perfectly for the Neo/Racing Fighter. --- Karrosseriehalter für Tamiya DT-03 Neo Fighter / Racing Fighter Ich habe die…
Holds two BNC/binding post connectors for attaching a device for testing with a VNA. Designed in OpenSCAD, so it is completely parametric. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .2 mm Infill: gyroid Filament:…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Body post for Robak 2 RC, also played around with post you can add a magnet to hold the body with but I have not tested it yet. Will need two M3x8 and washers to mount the post.
Mounting clip for kitchen baseboards, that clips to legs/posts with a 32mm diameter.
DR Yarn Storage Bobbin Posts: Designed to be printed lying down, don't need glue, excessive -Z offset, and prayer
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Modelled at full scale - ready for you to scale to the needs of your layout. Image credits: Infrabel Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Doesn't Matter Supports: Yes Resolution: 0.02 Filament: Anycubic Standard…
Support block for scratching posts 1PZ - Diameter 67 mm x 122 mm 1PZ - Diameter 67 mm x 160 mm
Most laptops manufactured today use a brass grommet that is pressed into a plastic post to mount the screen hinges. Eventually this plastic will get brittle and break. Most of the time this involves replacing the palm rest. However, the…
Designed this to fit a 15.5mm OD pneumatic die grinder onto a CXA tool post on our Trak lathe. Holes are sized to fit 10-32 heat set inserts.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The capsule is large enough for a couple of house keys and…
Terminal plat to accommodate bigger Ø7mm binding post
This is a remix of the awesome phone tripod by LoboCNC. I have added two variations of longer tripod posts. - The 148mm post is 40mm longer than the original. - The 198mm post is 90mm longer than the original (intended for holding the…
Replacement body posts for Kyosho Mad Crusher VE. The front and rear versions are thicker and have no holes up to where the cross brace installs. The full version has a full set of 8 holes like the originals. I printed mine in nylon for…
Link to modified Onshape model Link to original model by mothdotmonster I only modified the 4 posts to be smaller to fit my board. They appear to be 2.5mm and my board was able to fit.
I just needed one of the middle panels to be longer this one is 210mm in length from 160mm, height still 110mm // original: Cat Fence 160x110 - 8mm
Mailbox Post Cap for US sized posts A very simple and elegant shaped, easy-to-print mailbox post cap to protect the top of wooden mailbox posts from weather. Two screw holes are provided for affixing the model to a post. By default the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is the 3rd iteration of this cord wrapping widget for use with my kid's skadis technology ‘drop zone’ My goal was to make something that was easy and fun enough for them to use without my help. we will see how that goes… Print…
The little posts on the covered doorway just didn't print well for me: they kept being knocked over. So, I cut them out and replaced them with angled supports instead.
I printed in PETG green marble, .45mm nozzle 0.2mm layer heights .42 layer width 8% infill and 3 layers thick Works like a dream! Though I wouldn't recommend putting them out on the ash tray.
This sleeve was designed for a 2011 BMC RM01 seatpost, but fits most D-shaped BMC seatposts of that era. The main purpose of the sleeve is to prevent the bike from twisting in the clamp of a workstand due to the D-shape of the seatpost.…
Replacement speaker grill posts for realistic minimus 7W speakers. These are a little wider to avoid rattles.
This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print in TPU/SemiFlex with the side with the back facing down and the wider edge up put support enforcer blocks under the hex posts.
I have a Basherbody on my Outcast 4s V2 and only needed one hole, so i allowed myself to do a little remix. printed in filamentum 98A TPU Thanks to @Geddysburg_565729
I had some issues with the posts warping when adding the inserts and then shearing off when screwing in the screws. I remixed the top case to make the posts thicker 7mm → 10mm and added a slight chamfer for easier insertion.
I needed suitable caps for our garden fence, but since I didn't know where to find them, I decided to print them myself. We'll see how durable they are and which material will work best later on. I created these caps with specific…
I didn't want to have to think as much about alignment when putting the model together so I added some registration posts/holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill:…
I've remixed the existing solution for Spool hanger to use it with cheap wood posts. wood used is: 60 x 30 mm, Length: 2000 mm (2m). my setup is to use 3 hanger (one each side and one in the middle) Printed for extra strengths: PETG n0,4…
You can build your own customizable robot maze with these corner posts. These small posts can connect foam core board walls into different configurations to create a robot maze for your robot to navigate.
These are posts designed to hold up a cat hammock. I didn't want to spend the money on a commercial solution when I have a thing maker in my home, and I wasn't satisfied with the solution(s) currently on Printables. Therefore, I designed…
Simple and easy to print toy miniature fence models. Long and short variants of the fence and a semi-circular gateway are available. A connector ring model is also provided for extra stability for adjacent pieces. The rings can be…
Simple, easy‑to‑print miniature fence pieces designed for toys and tabletop builds. Each section features circular vertical posts that allow smooth rotation. The set includes long, short, and very short fence variants, along with two gate…
I designed these to easily find the CG of my Flite Test Legacy V2. The Legacy V2 has two holes in the wing to support the plane to find the CG. Designed in three parts, print two of each then glue together. The clearances are a little…
Optic post holder for the use with 14 mm posts. The hole on the bottom is made for a M6 heat insert. The hole on the side is made for a short M6 heat insert.
Grab Version #3 - fully printed and shipped straight to your door - from the Dickson Antiques eBay shop! Ships in 1 day, with a generous helping of strawberry bon-bons in every order. Version #3 requires no support structures and features…
Optical post holder for 12 mm or 1/2 inch diameter optical posts. Thread holes are modeled, compatible with metric M6 threads and bolts. Print with 0.10 mm layer heights for at least where the threads are for best thread hole quality.…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
ZD Racing Pirates 3 body posts (mounts) for 1/8 Pro-Line BullDog Body No support. TPU 95A, 60D
I used this to plug the seat post hole while having my 2 bikes on a bike rack so the seat posts don't get stolen, it clamps on and fits tight. One of them actually got stolen while I was sleeping overnight at a truck stop so I guess its a…
Made this model to support a ESP version I am sure is the new ESP8266.
I'm sick of buying terminal blocks for $2.5 each. It's time to make my own. You will need: 6x M2 bolts (around 8mm) 6x M2 nuts (they will slide into the square cutouts and be used to tension the bolts against the wire) The holes are 2mm…
The rook was like the only piece that wouldn't make anyone think anything about me. the pawn looks sus, everything else is a religious symbol. actually the knight would be good. uses #6x1/2" wood screws comment if you have any ideas or…
Needed something to store two vehicules in one Kallax/Expedit shelve. Hardware required : 12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion) 4 m3 screw Print one master…
Traffic posts: To print a 750mm high traffic post you require: Qty. 1 Cap Qty. 2 Joiners Qty. 2 Posts Qty 1. Base post twistable Qty. 1 Base You will also need some glue and 50mm reflective tape. Recess in the posts for the reflective tape.
We recently installed new lamp posts in our yard, but unlike the old ones they didn't have cross arms. A bit of an issue now that we want to hang Christmas decorations, so 3D printing to the rescue. This collar is sized for standard 3''…
Furniture and post pad. Version 2. Screw-mounted. Podkładka do mebli, słupków. Wersja 2. Przykręcana na wkręt.
Furniture and post pad. Version 3. Screw-mounted. Podkładka do mebli, słupków. Wersja 3. Przykręcana na wkręt.
If you've ever gone to replace your lane guide plastics or the metal guides under them (check out Cliffy's replacements if you haven't yet: www.passionforpinball.com), then you've probably fought to remove the riveted-in supports so you…
I made a battery pack using an ammo box and a 12V, 4S LiFePO4 set of cells. The box came out great and is since used regularly for my outdoor astronomy activities. I bought two binding posts to recharge the battery with the usual ring or…
Shout out to @TimAngus whom I believe is the maker of this Garmin mount. When slicing you need to separete the individual parts and possition them on the print bed. If you will not do this, it will not work (I correct the stl file later).…
These are printable replacements for the body mount posts on the Nikko Evolution and Nikko Super Evolution, the 1:14 and 1:10 scale vehicles respectively in the Evolution lineup. There are two lengths of post I'm aware of, usually with…
Post Cap for 6[in] SQ. Desk Post. The Cap is 5.75[in] Inside Square to give clearance for any deformation in the posts… i.e. bent, twisted, leaning, etc. I printed them with the top on the build plate (i.e. upside down) so no supports…
Screw in post for keeping my wooden framed windows open/closed. Two types are just different screw hole locations.
a clip to mount a baseboard to you kitchen furniture posts.
Optic post holder for the use with 14 mm posts. The holes at the bottom are made for 5 mm diameter magnets The hole on the side is made for a short M6 heat insert.
