268 models
Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
Audentes fortuna iuvat! Protect your Philips OneBlade with a travel case worthy of a Bohemian knight. Inspired by the iconic Saviour Schnapps and medieval scroll cases from Kingdom Come: Deliverance , this design combines rugged…
Print approx. €12.13–€14.83 excl. taxPreliminary estimate for one variant
To prevent spills falling out of the Skeppshult pepper (casting iron, ceramic and beech tree) mill you may need this coaster to keep dinner table clean. This protection will be keeping attached to the mill when you pick it up. Just remove…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Some universal hooks for pegboards like IKEA SKADIS or UPPSPEL. Different lengths available. Printed with PLA and 15% infill. No supports needed. Material prize is around 0,05€ for each. Freecad model and .stl files attached. Have fun!…
My little one had such fun coloring these, so I thought I might as well share them for the prusa community. I printed with both PLA and PETG and the supports came off surprisingly easy, so I will share my support settings as well. Not my…
Basic and double hook for Skadis/Uppspel boards. Modular design for mechanical strength and modular capabilities to mount anything you want. Modules for equipment are available in my collection: UPPSPEL & SKÅDIS mounts For your own module…
Mount for all your screw bits to be always reachable. Mount is tilted so you can access any row anytime. My setup produce decent press fit (depend on printer and slicer calibration). No glue needed. For mounting on Uppspel board use side…
In 1986 the "Nederlandse Spoorwegen" (Dutch State Railways) started the refurbishment/reconstruction of "ballastwagons". Details: https://nl.wikipedia.org/wiki/Fccpps and http://spoorhistorie.com/goederenwagens-fccpps.html At first this…
Belt CLap- Two parts clamp. Easy to assembly. Use two M4 x 12 mm bolts for assembly. This object can be customized or integrated to use in your other projects. Also check out my other models and like them plce.
Das ist mein Closetsnap oder Kleiderschrank-schliesser! Die Anwendung ist einfach, Ausdrucken, dann den Haken an der Schrank Innenseite an die Gewünschte Stelle halten und Mit zwei Schrauben durch die Löcher Fixieren. Danach messen sie…
After publishing these wagons in Gauge 1, 45 mm , 1:32 ( https://www.printables.com/model/181911-nederlandse-spoorwegen-railpro-fccpps-ballastwagen ) several people challenged me to scale up to Gauge 2, 64 mm, 1:22.5. This seems a simple…
Verhindert das zu und Aufschlagen von Fenstern oder Türen, die in Kipp Position stehen. Am Wochenende war der Wind so ungünstig, dass meine Terrassentüer, die auf Kipp stand immer auf und zu geschlagen hat. Darum habe ich diesen…
Hochkippschaufel für die Bruderfrontlader Aufnahme. Prototyp für manuellen Betrieb, keine RC Funktion in dem Modell Verfügbar. würde mich über ein Feedback freuen.
Droneholder for the Ikea perforated plates UPPSPEL and SKÅDIS. Needs Supportmaterial!
Altura Recomendada 150mm Diseño Una figura modelada para capturar la esencia táctica y enérgica de Judy Hopps, inspirada en la película Zootopia. El diseño busca resaltar su personalidad fuerte y decidida combinado con un atuendo de…
Crimping plier holder for IKEA SKADIS pegboards specifically tailored to fit the IWISS SN-2549 ratcheting crimping pliers. Two versions are included: Plier holder with three slots to hold spare/different crimping jaws. One of the slots is…
A shotglass sized version of a german Dubbeglas (wine glass with dimples) Walls are 4mm thick to guarantee water tightness. Print Settings Printer Brand: Anycubic Printer: Kobra Rafts: Doesn't Matter Supports: No Infill: 100% Filament:…
A new 3D figurine generated by AI, a Chibi Judy Hopps (Zootopia). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of…
i saw the bell polymaker made and couldn't find the file so i made one myself. its a 2 piece print in place. 100mm bell about 210mm high assembled. bell portion is meant to be printed in pps for the ringing property and the handle can be…
Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.
Compact plier holder for pegboards like IKEA Skadis or UPPSPEL. Due to its perpendicular design you can store 3 pliers in the area of 1. Universal design - fits for small and big pliers. Easy to get, easy to hang. Designed to be printed…
Ferrule crimping plier holder for IKEA SKADIS or UPPSPEL pegboards. I think it will fit and hold most generic no-brand ferrule crimpers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong.…
Holder for a Toniebox compatible with IKEA Skadis and Uppspel pegboards. Update June 25 2024: I added a second Version to be used without the charging pad (running on battery) that has a the stub to hold the toniebox in place. Print both…
A little folding deck chair for the elf or another doll. Print in place with supports. You have to glue a piece of fabric to it (about 180mm x 45mm). I used a double layer of fabric and sewed it together.
This is the ideal choice of PCAR if you want both the Silly Spigot mounting system as well as Thanh's new RIPPCAR geometry. Variations The internals of every variation are the same as the RIPPCAR, the only thing that changes is the outer…
Crimping plier holder for IKEA SKADIS or UPPSPEL pegboards specifically designed to fit the IWISS IWS-3220M ratcheting crimping pliers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong. I…
To clarify which holder you need: For XS Max and 11 Pro Max use iPhone_XS_Max_holder.stl For XR and 11 (non pro) use iPhone_11_holder.stl For X, XS, and 11 Pro use iPhone_X_and_XS_holder.stl There are quite a few 3D scanning apps…
Here is a simple parametric bin design for the Ikea SKÅDIS/UPPSPEL pegboards. By downloading the FreeCAD file named “Birdbrain_SKADIS_parametric_bin.FCStd”, then opening the spreadsheet called “params”, it is possible to adjust the…
Ersatzteile Kippschere für Kellerfenster ähnlich MEA 41 A 290 und 41 A 291 Spare parts for basement windows similar to MEA 41 A 290 und 41 A 291 2026-08-12: Revision 001 mit bespiegelter Führungsnut ergänzt. Nur CAD Modell geändert, nicht…
Remixed from https://www.printables.com/model/712211-gamer-supps-10-can-shelf A storage rack for Gamer Supps mix jars.
Praktischer Spender Für Wattestäbchen / Q-Tipps
Zwei verschiedene Größen von Haken für die Ikea Uppspel Vitrine. Das Board ist schmäler als das Skadis Board. Stärke des Board 1mm. Die Längen der Haken lauten: V1 = 10 mm V2 = 5 mm Die Haken sitzen feste am Board.
This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight) The cup fits nice and securely, leaving enough clearance. The cup holder slides over the load cell and screws…
EN: One of the guide hooks on grandma's fridge has broken due to age (or grandma's strength :D). So a replacement part was needed. This is a guide used for follower hinges on built-in refrigerators behind furniture doors. They are largely…
My dad got a “dust funnel” broken on his Einhell pull crosscut saw 2354. I have the small version, but the rod funnel is identical. So I designed the part for print. It ensures that the saw dust is directed into the catch bag. Printed in…
Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame (Speedybee Master 5 V2) but was too tight to rest under the arms…
Three versions available: With both unicorn and PPSh Only with unicorn Only with PPSh Made this model for my nephew, she said horse is boring. The PPSh-41 instead of mace is a reference to a well known scene from a Czechoslovakian movie…
Introducing the 3D printable case for our popular WiFi-Controlled Color Word Clock . We're a team of three siblings, still in school. Our Word Clock kit has not only been a labor of love but also a project that has resonated with makers,…
Just another Skadis Keeb holder with 35deg for more KEEBs on your wall :)
Used my Creality Ender-3 S-1 printer, 0.2mm layer, 20% infill (grid), with supports on. You may need to rotate the model to sit with the “bottom” down. Printed in PLA, which seems to hold up just fine. EDIT 11/22/2023: changed the model…
Some universal hooks with round tip for pegboards like IKEA Skadis or UPPSPEL. The round tip is excellent for hanging things with smaller holes. Different lengths available. Printed with PLA and 15% infill. No supports needed. Material…
STILL WORK IN PROGRESS! To Print the full raiser please visit https://cults3d.com/de/modell-3d/werkzeuge/creality-k1-max-deckelerweiterung becaus it is not a free model so i will not provide the original files! UPDATE 07/01/24 Fixed the…
There was recently a promotion at a discount store for a set of Parkway screwdrivers. To make sure they find their place on my Ikea Skadis wall, I created these two holders, which provide enough space for the slotted screwdrivers and…
The IKEA UPPSNOFSAD boxes don't come with any way to clip the lids down. These clips are a quick fix to a slightly annoying “problem.” Printed in PLA with 30% infill.
This model is not permitted for use on selling websites like Etsy. I keep models free because I believe this idea should be free. Please do not sell printed versions of this model. The first 3 layers of the largest part should be printed…
Very simple but effective holders for gamepads. Designed specifically for the xbox series x controller but it works okay with the dualsense from playstation. It is mounted on the table frame taking advantage of the existing slot. the two…
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
This is the full-length barrel for the TB-12 including a handguard. Assuming you have the old barrel, just transfer over several components like the ejector to this. I designed it to be modular so you can experiment how long you want it…
Disclaimer: I am not going to be held responsible if you overserve yourself while using my scoops. According to people in lab coats, 400mg of caffeine is the recommended daily maximum intake. One serving of caffeinated Gamer Supps…
Tray for Clamps (without the stopperpins! I took them out after I lost some of them)
Best done slowly and with support.
Small bottle holder for pegboards like IKEA Skadis or UPPSPEL. Designed to be printed without supports. You need to print two hooks (skadis_bottleholder_Hook_v1.stl) for one holder. Different diameters available. Printed with PLA and 20%…
A storage rack for Gamer Supps drink mixes Print Settings Printer Brand: Creality Printer: K1 Rafts: Doesn't Matter Supports: Doesn't Matter Notes: Print on the back if you want the least amount of support, I ended up slicing the raised…
A mount for the HiQuick 8 Slot Battery Charger . I've used CSD_Salzburg's universal hook for this design. This is compatible with both SKADIS and UPPSPEL boards from IKEA.
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1. I made three versions for single, double and triple frames. The versions for double and triple frames are designed for a plug in the lower hole and…
Gedruckt habe ich es aus ABS, weitere Parameter kann ich leider nicht geben. Der Fuß ist bereits seit 2018 Montiert und hält seitdem^^ Die Nieten vom Originalstuhl wurden entfernt und durch Schrauben und Muttern ersetzt. 2024_05_30 neu…
Another great model from onecura. I spent 10 minutes playing round in Windows Paint3D. Very cool app Cheers Jace
In this case I have reduced the keychain and it does not have the bottle opener functionality that @MatthiasW_1620678
A tray to hold all of your samples. 9 slots hold about 25 samples each. 70.7mm wide. Fits Prusa Mk3s bed. No supports required! Please don't sell on Etsy! Please share your make! I want to see your collection!
Lid of Eshopps medium overflow. Fits well. Printed in PETG at .2 layer height, no supports required.
A simple cover that fits over a Gamersupps Energy container. I have some cans I want to bring into my office, so I designed this to cover the cans that have less work-appropriate labels. This should be a snug fit over the container, so…
A tight and strong clip for the UPPSNOFSAD storage boxes from IKEA. Plus you can still stack them. Insert from the bottom and clip upwards.
Es handelt sich um einen Nachbau einer Kippschere mit der Kennung "48 A 59". Sie wurde abweichend vom Orginal um die letzte Einrastung eingekürzt. Die Kippschere verhindert allgemein, dass das Fenster beim Öffnen aus dem Rahmen fällt und…
improvement to the sonicare charger, since it fell over on minute one after getting it. I use the Double Version to get two toothbrushes charged at the same time.
Required hardware: 20x20 Aluminium Extrusion 2x Extrusion Nuts (M5) 1x 16mm M5 internal hex Screw 1x 25mm M5 external hex Screw Besides the obvious feature of serving as a stop for repeatable cuts, this model has a passtrough for a…
Dies ist ein kleiner Adapterring für Pappspulen von z.B. Polymaker oder Overture, damit diese problemlos in Multimaterialsystemen wie der QIDI Box oder dem Bambulab AMS funktionieren. Der Vorteil dieses Ringes besteht im Vergleich zu den…
Use variable layer height in PrusaSlicer to get the top details better (0.1mm) and print the base with 0.2mm. Edit 29.03.2024: Added versions for "Chrome" and uploaded missing STL file for “Outlook LED” variant. Edit 31.03.2024: Added…
A quick modification of the original part. The cover is not available in my country, so they cannot be stacked. I have created this remix to be able to stack them without any problem.
Got sick and tired of cleaning a filter sock and not having a place to put my purigen so I designed this guy to hold filter floss or mechanical sponge that can just get tossed when clogged on top with a removable divider to hold my…
Materialunterlage für Kappsäge oder Kappzugsäge. PETG Düse 0,4mm Schichthöhe :0,15mm Die Schichthöhe von 0,15mm oder weniger ist empfehlenswert. Die höhenverstellbare Materialunterlage ist mit einem Feingewinde versehen. Beim Absägen von…
Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…
Bring the beloved optimistic bunny cop to life with this stunning 3D printable figurine that captures every adorable detail in perfect STL format! This meticulously crafted statue showcases the determined stance and iconic features that…
Nothing fancy. Just a shelf for the Ikea SKÅDIS / Uppspel so my steam deck is not laying around. Printed in HDglass but PLA or any other material will work. I printed with supports under the hooks but I don't think its really necessary. I…
Ersatzteil für Klappstachelreihen Klammer vom Geschierspülmaschine von Siemens. UPDATE 17.09.2023: Klammer wurde überarbeitet.
Adapter ELU - Festool Bosch etc. Print instructions Unassociated tags: kappsäge Category: Parts
Holds Gamer Supps sample packs - Includes divider to keep them upright. Printed with PLA .2mm, 15% infill, no supports. Divider may need to be printed at a slightly larger scale if it fits too loose. It depends on the filament.
This is part of my Extremely Practical Prints series. I wanted somewhere to store my prints which required little to no effort to put together. It is recommended that you print this in ABS. On a Voron 2.4 350mm, this will take about ~3…
Co worker wanted a 45 degree angle to spray gel under boats at a different angle (some trimming or sanding required) a 90 degree and better model coming soon (i am new to fusion 360) being my first model I've made its not perfect and…
Allows to mount UPPSNOFSAD container as a drawer for small things.
Capture the adorable charm of everyone's favorite rabbit officer with this stunning 3D printable STL figurine that brings Disney magic straight to your desk! This beautifully detailed statue showcases Judy in her iconic pose, perfect as a…
Since the PPS has no filled cup holder because one usually mixes the paint and then uses it. I use the system to give me a way to quickly switch between paints and cleaning solutions. I store the filled cups since they are airtight and I…
Have dropped these bottles in the past and they just cracked on the edges making the bottle unusable. I'm hoping the TPU will give it some bounce without inner cracking to the bottle. I haven't done any tests as I don't want my bottles to…
Jung A590 Rocker Switch (Wippschalter) Printer: Bambulab X1 Carbon Nozzle: 0.4 Filament: Bambulab ABS Layer Height: 0.16 Wall Loops: 2 Infill Density: 40% No support or brim needed Have fun
Bring the determined spirit of Zootopia's beloved bunny officer to life with this stunning 3D printable STL model that captures every detail of courage and optimism. This beautifully crafted figurine showcases the iconic rabbit character…
A parametrized card box, in the SCAD or FreeCAD file you can modify the parameters. parameter description default value width Box inner dimensions 42 length Box inner dimensions 128 heigth Box inner dimensions 25 wallthick Wall thick 1.5…
Nachbau der Kippschere für ein Fenster im Untergeschossen
Spring locks / Hasp for drawer/doors in my Knaus Südwind, the original one is broken.
I lost my gamer supps scoop so I printed a similarly sized one. Made the handle shorter to fit tall and wide tubs! Print open side up, use slim trees, .12mm layers.
Re-Upload from https://www.thingiverse.com/thing:3267444 to share it with Prusa-Printers as well inspired by some of the other self watering pots i made this Power-Plant-System The insert for all of the Pots is the same, just print…
So let's face it, some of us who order these things have a problem with collecting these things. Myself, well I have around 20 tubs and as much as I like how they look as collectables, they take up a lot of space. So here's my solution to…
This is a remix of one of my previous models adapted to work as headphone stand instead of a a game controller one. The two designs are actually compatible and can be combined if for instance you own only one headphone and one gamepad :-)…
Mit der Schriftseite zur Build-Plate drucken. Die Schrift liegt relativ flach im Modell, sodass nur wenige Filamentwechsel erforderlich sind. Die Schriftschärfe wurde sowohl auf strukturierten als auch auf glatten Build-Plates getestet –…
Ich habe den Benchy Halter umgeändert um ihn an der Ikea Uppspel Vitrine zu befestigen. Die Rückwand ist dünner als die Skadis Reihe. Der Halter liegt als 1er, 2er oder 4er Modul dabei.
Simple 2d design of the PPSH-41.I will make more guns if you want to suggest them let me know in the comments.
Generic door handle Bear for kids room You need to add spacer from the door to make a handle as you like
What you are looking at is a solver to a problem a few of us have. Having too many Waifu cups or GamerSupps tubs and nowhere to display them, introducing my Gamersupps Shelf. Designed to hold one Cup or Tub of your choosing, Pictures that…
