248 models
This is a roughly the size of a crankbait practice plug for practicing casting spin or casting style rod and reel setups. A split ring can be added to aid in simulating the casting of lures. Changing the density of infill allows for…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
A desktop display stand for your Sparrows Practice Locks. There are several configurations, including some with embedded magnets for use with metal desktops. Each display stand has recesses on the base for optional stick-on rubber feet .…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
This is an isometric practice worksheet with matching 3d models. The models use ¼" as 1 line length on the worksheet. The model “all isometric shapes” has them all within a 4.25" x 4.5" box. I included a STEP file of the group if anyone…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
This is my variation of ANicolai's “ Mute for Violin and Viola .” Printing in various PLA+ as oriented without support. .16 layers, 4 walls and 80% infill. We tested these against an actual an metal practice mute. It actually stacked up…
Some practice rings to improve your darts focus! ;-) Enjoy!
Here is a practice fishing plug. Print Settings Printer: Ender 3 V2 Neo Rafts: Yes Supports: No Resolution: .02 Infill: 100 Filament: NOVA Maker ABS Orange Notes: If you print at 100% it will be approx.11 to 12 grams which is about 3/8 of…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
12 ga 2.75" Practice round, dummy shell If you want to use this to practice loading i would print with a heavy wall count like 2.4mm, no infill, then pause it right before it prints the top and put some weight in there so it has the same…
Pencil holder shaped like a TIG torch to help practice, or just to show off how much you love welding
This quick-print model lets you practice your Heat Set Insert skills. Print a few, and practice inserting the Heat Set Inserts! It's designed for M3 inserts with a 4.6mm outside diameter, and up to a 6mm depth.
Turn any carpet into your new practice green! This easy and quick print lets you turn any carpet into you new practice green. I enjoy using it, and tossing it out like a frisbee to end up with a new random hole distance for practice.
EagleBalls - Golf Practice Balls A simple practice golf ball that won't fly far. Practice in the yard, at the beach, or in a parking lot (hitting off a mat): the world is your practice course! Print it with glow-in-the-dark filament to…
This is a playable uilleann (Irish) bagpipe practice set. It contains all the printable parts you need to build a practice set. I don't yet have good assembly instructions. Please email or message me if you'd like personalized assistance…
Verg good for practice. For best results print in TPU but it can still be printed in other filament. Just like a golf ball but it does not go as far.
Sorry in advance for the mess, this is just a quick post with some bad pictures of a design that I made in 2022 and never 100% prepared for release. I just found it again and thought it would be a waste to not post it to the community in…
Donald Linsay designed a mini bagpipe chanter in high G, and I wanted to print it as a practice chanter so I took the top file from Kadaku's practice chanter and resized it to fit, and I also took the printable reed parts to make my…
Just a bunny.
Regular print setting 0,2 layer and no supports should be ok, but feel free to experiment This thing definitley has more lift than just a stone or ball… just give it some rotation and good angle :) Disclaimer: Should fit in all cd-dvd…
Small 1:1 scale practice modeling - MK8 Hotend with a 0.4mm nozzle. Screws and threads modeled.
This is a 60.86 mm diameter by 352.49 mm high model of the M38A2 100 pound inert practice bomb. This was filled with sand and sometimes a small marker explosive then used during target practice in the forties and fifties. The originals…
Print using approximately 25g of filament, fill with 21 pennies to reach standard empty magazine weight of about 71g
It's a mini-billboard to practice graffiti, not accurate to image
Based on the dimensions from a store bought set. I haven't actually printed this version, the version I printed has 1mm holes and they turned out a bit small so I increased to 1.2mm and did a bit of alignment. I have included the Fusion…
my version of the butterfly knife took some time to get the weight distribution right but it now works well I printed mine in PETG and used a section of filament off the spool to act as the hinge pin on both handles to add some strength
9 hollow golf balls great for practicing and more
I made the club bigger and made the hole to fit a normal golf club shaft. same setting as OG model.
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Enhance your child's dexterity while having fun with our 3D printable animal shapes! Designed for sewing practice, each shape features easy-to-use border holes, making them perfect for little hands learning to stitch. Ideal for beginners…
The Guitar Practice Fretboard is designed for practicing guitar chords and notes. Beginners can use this fretboard to practice chord finger positions anywhere without needing an actual guitar. By using your old guitar strings, you can add…
This mounts to an xbox style wireless controller. It maintains the right joystick control in a centered position while allowing backward and forward motion only. This allows for an easier good swing in the advanced modes. (e.g pro). This…
Practice Stick Plane - print in place Category: Vehicles
These finger cymbals are also called zills. It is a suitable choice if you are an oriental-style dancer and want to practice without making too much noise. You need to print them in pairs and add elastic bands for your fingers.
Hello, i designed a simple pin organizer for the pins of locks. Enjoy :)
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
3D Scan to Editable CAD – Fusion 360 Practice Full step-by-step video tutorial: These are the downloadable files used in my 3D Scan to CAD / Reverse Engineering Fusion 360 tutorial . The goal of this exercise is to use a scanned 3D mesh…
A simple case for Sparrow Practice Locks inspired by https://www.thingiverse.com/thing:4955652. There is an OpenSCAD file you can customize and I have uploaded both a 4-lock version to hold the standard Progressive Lock set as well as a…
After looking at all the practice pads available, none of my liking were within my prince range. So after some thinking I came up with this design that allows you to mount a 10" mesh drum head to the shell and tighten it with the rim…
📄 Description: This is a fully 3D-printable clarinet reed designed to work with a standard Bb clarinet mouthpiece . Made from PLA , this reed is surprisingly functional, offering a playable experience for practice, testing, or…
Practice mute for brass instruments. The print contains two versions , one normal version for trumpets and smaller bore instruments and one large bore version for large bore trombones and their like. Printed in PLA with 0.2mm layer height…
A simple model to test the quality of brass inserts and practice for people who have never used inserts before. I recommend using a soldering iron and the insertion tools by ruthex…
Fusion 360 – 3D Sketch & Sweep Practice This project contains the reference files used in my Fusion 360 tutorial about creating 3D sketches and tubular geometries . Watch the complete Fusion 360 tutorial here: The exercise is designed to…
Simple weighted fish for practicing casting a fishing rod. My kids love doing this in the backyard between fishing trips. You’ll need to scale it down a bit and recommend printing with higher infill to give it more weight (80-100%…
This is a simple two-part print intended for use with Covert Instrument's CI Practice Lock . The bitting tray makes it easy to keep track of the bits, pins and springs you want to load into the lock, while the stand can be used to hold…
Plug follower and repining tool for a Sparrows practice lock. I remodeled it from scratch and added a chamfer to the bottom to make it print better without supports. I also added a grove to the top to help to align and reinsert the…
I designed this for my coworkers and after many iterations, this design seemed the most accurate. The hole is regulation size and the outcome of your shots should be close to what you would expect to happen with a real hole at at least a…
mini Idpa target for dry fire practice
This is a comprehensive set of 3D printable 9x19mm Luger dummy rounds (snap caps) designed for safe dry fire practice, function testing, and malfunction drills. These models are designed to protect your firing pin and allow you to cycle…
Practice guitar neck for learning chords on the go. Roughly modelled after the dimensions of a Stratocaster neck. De burr before use
There are two types of flower-shaped sewing practice boards for children. They can practice safely with a blunt sewing needle. Finished products will be beautiful handcrafted gifts or cute home decorations. Dimensions: height: 150 mm…
I saw a double feed practice round while looking for a snap cap model and really liked the concept but the execution just wasn't there so I made my own. These will fit in-between standard rounds or other snap caps but not consecutively. I…
a handle for the covert instruments practice core to be held in your hand. must be imported as imperial not metric.
Practice Block for Threaded Heat Inserts M3 - M8 Made for Inserts from Turmberg3D and CNC-Kitchen Printed in whatever material you will place inserts in 0.2mm Layer hight 4 Walls 15% infill
I made this holder for the Covert Instruments lockpicking practice core, because the core is not very comfortable to hold in your hands. This print should make it much more comfortable. I made two versions; one is slightly shorter so you…
The Covert Instruments practice lock works best for me when fastened to something sturdy. I typically use a small vice to do this. However, I wanted something that would allow the vice to hold the cylindrical lock in a more robust way so…
Introduction In the last 5 years I have really got into sailing and boating in general, and even after joining a sailing club I noticed that many people subscribe to the “if you cant tie knots, tie lots” method of attaching boats. I am…
This is a practice tattoo machine that uses some electronics and a Bic 4 colour pen to give you that tattoo style on paper (and skin, just temporarily). I made this for a student who wants to be a tattoo artist and wants to practice the…
This model is part of a Fusion 360 practice project focused on designing curved, organic and complex geometry. The original piece is based on an automotive wheel cap, recreated from reference images. These types of designs, with smooth…
I needed a set of markers that I could use for teaching maneuvering exercises to prepare for the motorcycle test. The nearest practice area is designated for learner drivers only, but there are car learners who share the space. So I…
a weight to practice casting, good for kids, use in yard
Designed in Solidworks. Part of our Proto-pasta Stainless Steel PLA Polishing Kit available at Proto-pasta.com. A great first print for polishing practice! Purchase kits at proto-pasta.com or check out a local 3D Hubs Workshop :-)…
I had the nutty idea of using my M1 Garand rifle in 3-Gun competition. I wanted to practice speedy reloads at home, safely, using dummy rounds. You can use dummy rounds, such as A-Zoom snap caps, in a Garand clip. But there are a few…
Knot wizard is a surgical knot tying practice kit. The book-like shape allows it to fit in a white coat pocket to be easily portable. It can also store suture thread material for practice and scissors for cutting out tied knots. The…
CI Practice Lock mount to practice your locksmithing skills on a stable surface. Thanks @sgpdude_3039 for doing all the work to get the lock interface measurements perfect. The “v2” remix is simply canted back to access the front of the…
I was gifted a practice kit for trying locksport which included the CI practice lock . After a few days I got tired of holding it by hand and when trying in a vise, the back of the lock would not turn all the way after picking. So, I took…
Engage and educate young learners with this interactive 3D print model designed for mastering multiplication and division skills. The model comprises nine 12-sided dice, each featuring the product of a multiplication table. Children can…
Putt away! Two different hole styles - the round one is rather difficult, you need to be spot on. Instructions Print and putt! They're relatively large, but any printer should work. Shouldn't be much trouble with warping, since there…
Rubber Kukri for airsoft or practice use. Print the blade with TPU (low gyroidal infill for flexibility), and handles / pins with hard plastic. Glue needed for fixing the two halves of the blade together. Note the TPU may show the infill…
Really liked the previous practice lock holder but personally found the fit a little loose for my liking. Fired up OpenSCAD and haphazardly adjusted the original design. This variant holds the locks without any rattling or significant…
Arrow point cover for practicing knocking down bottles and what not. Can be printed from TPU with 20% infill as well for extra cushioning. Both caps fit perfectly my bullet and field points. Category: Sport & Outdoors
This is a peg dropping stand for fine motor practice. It's very similar (though not identical) to the one provided in the Lovevery playkits. Print 11 pegs and 1 stand. Designed with ❤ for Juliet, public for everyone. As with all…
A border makes sense for the ball and the stick. Carve the stick into shape and press it into the ball. Infill: 15% PLA, PETG -------------------------- für die Kugel und dem Stick ist ein Rand sinnvoll. Stick etwas zurechtschnitzen und…
Modeled from a Fender CC-60S acoustic guitar. Includes the first 4 frets along with raised channels for each string. Ideal for practicing chord shapes and finger dexterity exercises. Designed to be printed vertically in PLA, PETG or ABS.
Practice Pad using TPU for the pad and PLA for the Base. Both printed on Creality Ender-3 V3-SE TPU settings Layer Height - 0.2mm Walls - 3 Top shell layers - 8 layers Bottom shell layers - 6 layers Infill 30% to 40% (Higher infill =…
My Quest 3 controller golf adapter is based on Wasyl00's tennis adapter ( https://www.printables.com/model/686026-v20-quest-3-table-tennis-adapter/files ). I have modified it to fit my practice golf club, which has a diameter of 27mm and…
Fair warning before you print I am new to Blender and 3-D modeling in general, However, I tried this and it printed pretty well. The hardest part was making sure the bottom surface was flat, so you don't get weird supports underneath. My…
Printable Dummy Mags for the GHK G17/G45 Gen 5 Printed Mag is just the standard close to 1:1 with the standard mag with no feed lips or router Weighted Mag has a cavity internally for filling with weights, pause the print at 70mm from the…
No particular instructions; of course print it with the material you want to practice with ;) The FreeCAD parametric model can be used to change the number of pads, the diameter, etc.
One of my many hobbies is lockpicking for sport and fun, and I really like the brass practice locks from Sparrow (no affiliation). They're not too bad to pick in-hand but my weak hands still cramped up from holding them after a while so I…
Storage for the Covert Instruments Practice Lock and pins
A design I created with the help of a great tutorial video. Finishing it was a great inspiration for me. I hope you like it! I printed it small on a resin printer but scale it up and make it a big dummy on your XL. :) I also gave it a…
This donut-shaped case holds the 6 practice locks from the basic TOOOL set. There's plenty of room for the locks to easily slide in and out of each sleeve, and the hole in the middle lets you lash this threaded container onto your bag as…
You can practice with this uber super gadget
Add another level of fun to your trigger time. Hitting a pressurized plastic bottle using this cap will result in a 150 decibels sonic boom that can be heard up to 2 kilometers away! Screw this cap design on top of a regular 28mm PET…
Here is a link to Part 1 The demo video. https://youtu.be/ZIV9U77arEY Here is part 2 the 3d printed parts. https://youtu.be/XQTVmnMyplo Here is part 3, the wood case. https://youtu.be/U0qbj59C6bI Here is the Rocking foot pedal to control…
adapter should print without support
A very basic holder for the Covert Instruments practice lock. I just wanted something so I didn't have to hold onto the bare lock. Allows access to the top of the pins so you can re-pin it without removing it from the holder. Prints in…
Dank einer kostenlosen Vorlage im Internet habe ich dieses Knotenübungsbrett mit Ring, Klampe, Poller und Reling erzeugt. Empfehlenswert wäre hier, mehr Füllung zu geben, da die Seile bzw. Knoten einen gewissen Druck erzeugen könnten.
I made these numbers to mark the holes on a practice green. They have a tee at the bottom that can be inserted into the grass without causing damage Hice estos números para marcar los hoyos en un green de practica. Tienen un tee en la…
This is a 6" practice tamborim for samba drumming, made to the size of an average tamborim with 8 tension lugs. The “skin” is not very durable, I suggest gluing on a thick fabric or similar, so it lasts longer.
5 different sized practice rings for your dart game.
A simple print to use as "practice targets" to get your bludger swings just right! Print some faces or whatever on paper to glue on to the to circular area… the diameter of the top circle is 50mm.
This is a 29mm cylinder lock holder used for practice picking locks (for sport only). It was designed specifically with the Covert Instruments “CI Practice Lock” in mind. That lock can be found at:…
Ruthex Heat-Set Insert Tools Background I had some time to explore and decided to try making use of inserts in my designs and projects. After exploring YouTube and Amazon, I treated myself to some specialized soldering tips that were…
mine ended up litle heavy so you can decrese infil or so :)
I'm an amateur lockpicker with large hands. The edge of the fortress cylinders kept digging in my hand when practicing which made those types of locks not enjoyable to play with. Problem solved. The holder is 20mm thick, which makes it…
When doing dry fire practice, you need something to aim at. This simulates a full size plate at a distance for use in training environments with limited space. Best printed in dark gray to simulate real plates, or red for no-shoots. Print…
A holder for practice locks. The other holders I found on Thingiverse were way too small to fit my locks, so I made my own. There are tabs that prevent the locks from sliding out without some effort. The center plug snaps into place for…
A practice object to enhance your welding technique.
I wanted a small case to hold the Sparrows practice lock. This is the first version and still might need a little modification. I help train and host LockP Pick Villages so I have several sets of the 2-5 Practice locks from Sparrow Lock…
