3,455 models
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…
Protector Case Kit for JST-XH Connectors (2-9 Pin) Keep your JST-XH connectors secure with this Protector Case Kit, designed for 2-9 pin connectors. This kit provides durable protective covers that help improve cable management while also…
I really liked the cover and after I have upgraded my trusted MK4 printer to MK4S I have found my old cover won't fit. Instead of redesigning the wheel I have just taken the original design and changed the size to fit my new printer…
An aternative to the existing Lenovo Legion Go Joystick Protectors
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
If you plug your Tesla UMC into the wall inside your garage, but charge outside, this will protect your cable from the garage door closing on it and damaging it. If you have a Prusa MINI, I highly recommend using the Gcode and PETG for…
Universal AB Clip version, remixed from kekerino 's project These are the .stl files for half of a clip of either the 2S, 3S, 4S, 5S, 6S, 7S, or 8S size clips. Both halves of a full clip are the same, and they just snap together on either…
Easiest remix I've done using only the text modifier in Prusa Slicer 2.6.1 to make a triangular hole as volume level marker. I've included the .3mf file so you can remix your own.
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Protective cover for child's pouch Prevents the pouch from getting squeezed, protects baby from getting dirty and ensures that all snack contents end up in baby's tummy - Easy to grip - especially useful on the go - designed to ensure…
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Allows for a single place/tool to hold your billiards cue joint protectors while not in use.
Do people still need these? Fits 7 pens (including sharpies) and most pockets. Rounded edges for comfort. No flap.
Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print instructions Category: 3D Printer Accessories Summary Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print…
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
These are some simple plates you can put in a socket to protect them from little fingers (or the other way around, protect little fingers). They are easy to place but to remove them without the ‘key’ is not that easy. Printed the…
corner and edge protector for float glass 6mm; can be used e.g. to securely store the float glass tabletop of the garden set during winter;
As stated in the summary, it is a corner protector of simple design. There are two types: 3-sided corner protector , the most common variant, intended for most applications. 2-sided corner protector , with the same dimensions as the…
The jaw protectors fits to a jaw width of 100mm (102). I printed the protectors in PLA and TPU as solid parts. A sample gCode is added but my recommendation is to create your own with reference to your filament wish. Any questions or…
Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…
Easy to install protection for your carsh bars. Fits Harley Davidson TOURING 2024+ I recommend printing with high-temperature materials. Use four wall outlines.
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
This two-piece magnetic adapter lets you comfortably use a Samsung Galaxy Z Fold 8 with a case inside the GameSir G8+ controller. The open center provides clearance for many cases with hinge protection, while the separate left and right…
Stick Protector Taranis QX7 V2 I modified the model so that it fits correctly on the sticks
Screen cover to protect your display from dust and damage. With a cover it is possible to reduce light from the screen when you are slipping and printing in the same room. You can choose from 4 variants. A reset button is visible on…
Protect your Bafang BBS01, BBS02, or BBSHD motor with this 3D-printed guard, easily installed on your bike frame with simple zip ties. Designed to shield your motor from rain, snow, and mud splashes from the front wheel, it’s especially…
remix for better fit of usb c in SpeedyBee f405 v4 FC
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Not so much a repair, as avoiding very costly damage. Dometic Campervan / Caravan / Motorhome fridges are deliberately built light and flimsy, this goes for the evaporators in them as well. Worse the protection for these light evaporator…
Helps to protect FPV goggle lenses. Designed to be compatible even when you use diopter lenses. Print instructions Best material is PETG, because it's has to be flexible a little bit. Fell free to trim-sand top "bumps" which fit into…
The Logitech C920 Case 2020 Extrusion worked very well for my C930e. I was afraid to let unprotected camera lens protrude like that, so I designed a simple pseudo-pyramid that protects them - now a stray cable won't catch it, but rather…
Print in something non-brittle (that means: no PLA) and slip two o-rings into the grooves near the edge, like in the photo. Stick on your pole tips to keep them from scratching your stuff during transport.
Diameter of recommended felt glider: 35mm
We decided we needed a more secure way to manage our toddler - who is a three year old Labrador retriever. Another gate (the kind with the metal bar across the bottom and a door within the gate) to the rescue - now how to protect the…
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
Bolt protector and decocker for Schultz & Larsen Victory. Suggest printing in a color that is highly visible, especially in forest or similar areas. Suggest printing in a material that is less brittle. I printed mine in the photo with…
Simple to print, PETG is a good choice here.
The Garmin Oregon 6xx and 7xx have a great touch surface, but it also reacts very easily to accidental touch. For example, if you wear the device on your belt, and it touches your pants with the screen. Only if you lock the screen, this…
Edge protectors designed for glass or plexiglass panels used inside our homes/businesses. Useful for panels of thickness around 4.8 mm or less. Material: Prusa PETG Print quality: 0.2 mm nozzle Print time: 54 minutes Note: PET is better…
Pococo Galaxy Projector Planetarium Dust cover / lens protector. Schutzkappe.
These little printable clips are cast iron pot protectors, similar to what some brands of cast iron cookware, such as Lodge, provide when you purchase their products. I modeled these pot protectors to fit our Lodge dutch oven as we had…
Plant Cover Protector This was a cylinder made in Tinkercad and printed on an Ender-3 S1 in vase mode with no bottom layers. Measures 200mm X 200mm X 250mm. With brim in Cura slicer.
Jelikož ochranný roh je ze silikonu a nedrží na něm oboustranná lepící páska a spadává ze stolu, vyrobil jsem podložku, kterou jsem přilepil vteřinovým lepidlem na ochranný roh a teprve podložku až oboustrannou lepící páskou. Nyní drží…
Print the top in TPU or other soft filaments so that it is squishy and slid the top into the base, which hides the screws used to fix to the wall.
Prints in TPU You can try different wall counts / infill if needed.
EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…
This is a protective Orca Torch battery case I designed to prevent spare batteries from touching each other and causing when traveling by airplane. It fits the D530 and D530V flashlight batteries. I printed it with PETG but I'm sure other…
Zanuzzi oven Button protector Designed by R_vdk Application / Functions As my kid (1.5y) keeps pushing the buttons of my oven (and installing alarms at random times, which scare the hell out of us), I made a quick bracket which blocks the…
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
The FeiyuTech WG2X gimbal's power/mode button is easily pressed if transported not in a purpose built case. It can also be easily depressed while in operation. This model adds a ring around this button making it recessed and much less…
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Not made by me just noticed there wasn't an option for these on Printables yet and I have been using these for years now with no issues and my Index lenses have zero scratches because of them. Simply slide them over your lenses and they…
When moving the trolley in tight spaces with sharp corners, the handlebar tape tore and had to be replaced regularly. Something had to be done. The printed parts are attached to the handlebar with 5 mm cable ties, as shown in the pictures.
Pint Settings Material: PLA Supports: Organic support seems to be easier to remove.
Welcome, and thank you for choosing my model. I will provide some context for this model. This is a specially designed protector for a set square. I made it because my set squares often got small dents and damage over time, even when I…
Schutzkappe. Dust cover / lens protector for Sega Toys Homestar Original Planetarium.
Very simple model. Printed with glow-in-the-dark PETG for flexibility and visibility. Snug fit that does not fall off, so no further retainers are necessary. Practical for outdoor operations, only around 6-7g extra weight.
a basic corner protector for the sharp edges of a shelf
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off. However this part has a slightly larger opening…
Description A very simple design. If you carry multiple interchangeable adapters for your disc retriever/telescopic pole, and just throw them in your bag, use these caps to protect the bag's fabric from ripping. Fits M5 screws on the…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Apple Lightning to USB C cable protector for your new cables. Maybe you need setup upside down this model on your slicer. I used raft while printing. You need to slice it so that the narrow edges are perpendicular on the print bed.
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Keep your furniture, walls, and equipment safe with this simple yet effective Corner Protector Guard. Designed to absorb bumps and prevent scratches, it’s ideal for desks, tables, cabinets, or workshop setups. The curved inner shape fits…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
This is a protector fan cover to avoid getting the fingers inside by accident. Based on FeNi64 that it has a file of the model but I couldn't open it to print it. No supports need it Donations through Paypal
Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…
Remixed the rear dust protectors from @dancan13f full set (awesome, love them) so they don't cover the entire back vertical surface, and can fit an 8mm magnet. Replaced the vertical bars with a low ramp so anything that falls should…
Corner Guard attached with simple adhesive pads for photos ... printed in TPU Kantenschutz; Schutz von Tischkanten; Eckenschutz kann z.B. mit einfachen Klebepads für Fotos befestigt werden …
Simple plug protector for the rectangle Starlink antenna cable - this is for the antenna and router side of the cable. The plug is identical but the housing for the plug is slightly different. I printed it in PLA, but have also done TPU.…
Top and bottom tank protector for keeping your resin tank safe in or out of the printer. M4 nuts required for bottom section to screw together! printed these on a Creality K2 Max in PLA Category: 3D Printer Accessories
I created a hockey stick protector using the Warrior Sabre Taper Senior Size Hockey Stick. The Print is straight so you have to use a blowdryer to manipulate the model to your stick curve. This enables all stick curves and types of…
Print Material For inside use: any material you like For outside use: PETG, TPU or ASA No supports needed. Recommended layer heights M4 - M7: 0.1mm layer height M8 - M9: 0.12mm layer height M10: 0.15mm layer height M12: 0.18mm layer…
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
Printed with TPU 90A
This is an HDD tray for a Fractal Define 7 XL (and other models) with an optional SAS protector. The tray is a drop-in replacement or alternative to the original “FD-A-TRAY-001” tray from Fractal Design. Or also called “HDD Tray Kit -…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together. It's a simple gimbal protector for the radiomaster zorro. Rotate 180 (print upside down) in your slicer to print without…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
