Search results: psi

Sort order

1,538 models

Collapsing Lightsaber (Removable Blade)

This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…

Downloads
20,535
Likes
3,398
Rating
4.91
P
PrintablesRossero

Collapsible Hand Fan (print in place)

This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…

Downloads
15,847
Likes
4,111
Rating
4.37
P
PrintablesFlyboyEUC

Collapsible Dice Tower

This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…

Downloads
6,450
Likes
1,416
Rating
4.89
P
Printablesvaclavh

Collapsible Carrot

Nice collapsible carrot which can be magically pulled from your hand. Or from a combination safe lock box or from an egg shell . Prints mostly in place, just the carrot tip have to be inserted into the collapsed carrot body and pushed…

Downloads
1,569
Likes
400
Rating
4.95
P
PrintablesPRINTER

Collapsible / Rotatable Clothes Hanger (Print in Place)

Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…

Downloads
1,451
Likes
608
Rating
4.5
P
PrintablesFlexi-Maker

Collapsing Katana

Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.

Downloads
1,025
Likes
99
Rating
0
P
Printableshvrkh

Skládací košík, print in place, no support / Collapsible basket -- Updated!

Tento 3D model představuje skládací košík, který může sloužit jako dekorace nebo hračka. Košík je navržen tak, aby byl snadno sestavitelný a rozkládatelný. Jeho teleskopický princip umožňuje, aby se složil do malého tvaru a následně se…

Downloads
994
Likes
299
Rating
4.2
P
Printableshvrkh

Updated - Pocket hanger, collapsing, Print in place, travel hack, no support

I also made camping version. It is here : here Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší?…

Downloads
683
Likes
160
Rating
4.33
P
PrintablesStivo

Upside down dishwashing liquid holder

The bottle can simply be snapped in and the closure can be opened or closed together with the holder.

Downloads
625
Likes
245
Rating
5
P
PrintablesDanielAlex

Collapsing Lightsaber Blade

Blade This is the blade I'm using for my lightsabers. It consists of 6 pieces, each 18cm long. The whole blade is about 85cm fully extended. The pieces are printed in vase mode at 0.2mm layer height. If you want to illuminate the blade,…

Downloads
553
Likes
119
Rating
0
P
PrintablesFokieH

Print in Place Collapsible Back Scratcher

UPDATE V2 - 20241015: Geometrie modifiziert sodass der Griff im eingefahrenen Zustand nicht nach unten durchrutscht / Geometry modified so that the handle does not slip downwards when retracted…

Downloads
526
Likes
40
Rating
5
P
PrintablesCrazyRonny

Pacifier doll with print in place articulate collapsible handle

A lot of child, a lot of doll but only one Pacifier… a receipt for a disaster :-) Now there is no problem as they now have anough Pacifier for everyone… but I know… they'll find something else now :-P Easy to print and kids love them.…

Downloads
499
Likes
26
Rating
5
P
PrintablesFlexi-Maker

Collapsing sword

Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.

Downloads
493
Likes
40
Rating
0
P
PrintablesPRINTER

Collapsible Water Sprinkler (Print in Place)

Collapsible Water Sprinkler (Print in Place) Sweet collapsible water sprinkler for your kids. The water connection needs a little support. You only need the original seal of an adapter for the tightness. Model printed with: Prusament PETG…

Downloads
463
Likes
123
Rating
5
P
Printablesbrinkbeat

Stormtrooper Collapsing Lightsaber

I decided to (re)mix CaseStudyno8s (https://www.thingiverse.com/thing:5377195) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own stormtrooper's collapsing lightsaber. So I remodeled the whole thing…

Downloads
456
Likes
112
Rating
4.86
P
PrintablesFlexi-Maker

Collapsing Lightsaber (Multi-Part)

Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.

Downloads
296
Likes
101
Rating
0
P
Printablessuaz0

SCP Challenge Coin: MTF Epsilon-11

I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Epsilon-11 ("Nine Tailed Fox"). SCP logo by Far2; Epsilon-11…

Downloads
272
Likes
24
Rating
0
P
PrintablesSteveS42

Upside Down Bottle Holder

I made this for my wife. She said when the dish washing liquid bottle gets low, the liquid takes a while to flow down to the nozzle; but this kind of bottle will not stand on its own upside down and she needed to find things to lean the…

Downloads
174
Likes
41
Rating
5
P

Collapsible chess pawn

* No screws, glue, or any hardware required * revision note 09-07-2024: “the master printer update” The current version can be fastened by a flange locking screw in the bottom of the pawn. The base stayed the same. Stay tuned for the pip…

Downloads
114
Likes
55
Rating
0
P
PrintablesVeracon

Virpil WarBRD Collapsible Base

I created this collapsible Base so that i can first get out of my simrig and second that the Virpil Sticks are not in my eyesight when i play racing games. Apart from the print you will need 4x M6x20mm Screws 4x M6 Brass Inserts 4x…

Downloads
97
Likes
31
Rating
0
P
PrintablesSimple3D

RYOBI ONE+ 18V EZClean 320 PSI 0.8 GPM Cordless Battery Cold Water Power Cleaner Hose Protector

The #1 complaint about the RYOBI EZClean 320 PSI Cleaner is that the hose connection breaks off. I tried to solve this by making a hose holder that attaches to the tool grip. This tool is great for small cleaning jobs. I use the rinse…

Downloads
83
Likes
28
Rating
0
P
PrintablesIwan

Nivea Roller Deodorant Upside Down Stand

wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…

Downloads
74
Likes
11
Rating
5
P
Printablesmstejska

Small collapsible cup

44mm diameter and 44 height

Downloads
72
Likes
6
Rating
0
P
Printablessuaz0

SCP Challenge Coin: MTF Epsilon-6

I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces. This coin is for members of MTF Epsilon-6 ("Village Idiots"). SCP logo by Far2; Epsilon-6…

Downloads
68
Likes
5
Rating
0
P

Collapsing Hex Fidget

The two vases have a 1 mm clearance. I vase-mode printed hexagons to fit together and bounce up and down using magnets. They offer an interesting fidget / conversation piece. Making them in different colors adds a bit. The 1.25" magnets…

Downloads
41
Likes
11
Rating
0
P
PrintablesBrian

WPPSI like / Intelligence Test Block

These are similar to the blocks used in intelligence tests. 2.5cm. Children are shown a pattern on paper and asked to replicate the pattern with the blocks Assembly To make two blocks, print two copies of the STL in different colors. I…

Downloads
40
Likes
3
Rating
0
P
Printablestimo

Popsicle stick drop box (lid)

This is an alternative lid for my coin drop box. In order to stimulate fine motor skills for my 1-year old, I designed this lid that lets her insert popsicle sticks in narrow slits. The slits are cross-shaped so it's a little easier as it…

Downloads
28
Likes
9
Rating
0
P
PrintablesChorchie

Flipside Wallet 4 Moto Tag Bracket

I love my Flipside 4 Wallet but could not find a bracket that holds a Moto Tag, so I designed one. This attaches just like any of the official accessories and holds one Air Tag. Printed in PLA with supports. 12/14/24 - updated to…

Downloads
21
Likes
1
Rating
0
P
Printablesjn_prusa3d2

Kapsáček - držák na ovocné kapsičky

Doporučeno PETG kvůli omyvatelnosti. Lze doplnit obrázkem a pod.

Downloads
18
Likes
1
Rating
5
P
PrintablesMartin

Upside Down American Yellow Mustard holder

Upside Down American Yellow Mustard holder Woeber's Genuine American Yellow Mustard Squeeze Bottle PETG Only Thank you

Downloads
18
Likes
1
Rating
0
P
Printablesyawutheawu

Gocheer 40 PSI Airbrush Kit Storage Box

A storage box for this Gocheer Airbrush Kit , specifically the 40 PSI version, but as long as the compressor is the same size, it should work for the 48 PSI option as well. Test print uses a low infill % (5%) and low top surface layers to…

Downloads
13
Likes
3
Rating
0
P
PrintablesJed LaRue

Collapsible Colander Organizer

Collapsible Colander Organizer allows you to set a collapsible Colander upright to save room in a pull out drawer.

Downloads
7
Likes
2
Rating
0

Collapsing Katana (Print in Place)

This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…

Downloads
126,878
Likes
15,751
Rating
4.62

Collapsing Katana V2 (Print-in-Place)

This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
90,094
Likes
8,637
Rating
4.6

Collapsing Drill Sword (Print-in-Place)

This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
70,656
Likes
6,209
Rating
4.71

Collapsing Lightsaber (Print in Place)

This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…

Downloads
56,747
Likes
10,658
Rating
4.88

Collapsing Pirate Sword (Print In Place)

This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…

Downloads
34,749
Likes
3,510
Rating
4.78

Collapsing Swords and Lightsabers Test Print

If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…

Downloads
34,198
Likes
1,855
Rating
4.84

Collapsing Master Sword (Print-in-Place)

This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
33,761
Likes
4,244
Rating
4.7

COLLAPSING DAGGER (PRINT IN PLACE)

This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Downloads
24,945
Likes
4,160
Rating
4.68

Collapsible Basket (optimized)

Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…

Downloads
23,410
Likes
5,205
Rating
4.88

Collapsing Sith Lightsaber (Removable Blade)

This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…

Downloads
13,292
Likes
2,087
Rating
4.91

Muichiro's Print-in-Place Collapsing Sword

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
13,245
Likes
1,203
Rating
4.5
P
PrintablesKingTut

Fidget: Collapsible Fidget

Want the same results? Click here to find the filament I use for results like these. This super satisfying fidget can be customized to be any shape or size with the simple adjustment of a number! I have added 9 sizes that are ready for…

Downloads
12,527
Likes
910
Rating
4.81
P
PrintablesModer
Downloads
12,471
Likes
485
Rating
3.7

Tanjiro’s 2nd Print-in-Place Collapsing Katana

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
10,830
Likes
1,315
Rating
4.68

Collapsing Katana v2 Print-in-Place (Multi-Color)

This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…

Downloads
10,554
Likes
2,893
Rating
4.56
P
PrintablesFlexiWorx

Collapsible Katana Sword (Print in Place)

Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…

Downloads
9,278
Likes
693
Rating
4.43
P
PrintablesModer
Downloads
8,362
Likes
751
Rating
3.82

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Downloads
8,072
Likes
1,002
Rating
4.85

Collapsible Sword - Épée dépliable - No support V1

Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…

Downloads
7,874
Likes
657
Rating
4.76

Rengoku’s Print-in-Place Collapsing Katana

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
7,777
Likes
951
Rating
4.52

Collapsing Spear (Print-in-Place)

This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
7,299
Likes
1,276
Rating
4.75
P
PrintablesekalfwonS

Collapsible Katana V2

This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…

Downloads
6,950
Likes
834
Rating
4.7

Tanjiro’s 1st Print-in-Place Collapsing Katana

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
6,942
Likes
764
Rating
4.71
P
PrintablesARegularBear

Collapsing Katana - No Logo

A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.

Downloads
6,402
Likes
281
Rating
4.55

Collapsing Jian (Print in Place)

Collapsing Jian This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long The Replaceable Blade Version is available to my Clubs…

Downloads
5,965
Likes
791
Rating
4.94
P
PrintablesJamesThePrinter

Collapsing Pirate Spyglass

Land Ho! Sail the seas with the help of your Print-In-Place Collapsing Pirate Spyglass! This telescoping spyglass expands to almost 400mm! Print Settings No special settings are required. If you would like to make a 2 color version, you…

Downloads
5,416
Likes
1,649
Rating
4.98
P
PrintablesFlexi-Maker

Collapsing Katana

Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…

Downloads
5,036
Likes
826
Rating
3
P
PrintablesPlastic Flow

Toy Sword or Lightsaber (collapsible)

This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…

Downloads
4,865
Likes
503
Rating
4.75

Collapsing Archangel Blade (Print-in-Place)

This collapsing Archangel Blade is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
4,798
Likes
849
Rating
4.9

Wado Ichimonji Print-in-Place Collapsing Sword

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
4,604
Likes
437
Rating
4.63

Collapsing Lego Lightsaber (Print-in-Place)

This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…

Downloads
4,505
Likes
762
Rating
4.68

Collapsing Katana Single Edged Curved Blade (Print-in-Place)

This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…

Downloads
4,394
Likes
560
Rating
4.36
P
PrintablesTrzaX

Fish - collapsing sword

Fish with collapsing sword inside. You can use 8x2mm magnets for head attachment. I recommend printing it from petg for better durability. Happy printing!

Downloads
4,191
Likes
366
Rating
4.79

Print-in-Place Collapsing Tritana

This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…

Downloads
4,036
Likes
586
Rating
4.57
P
PrintablesEvey Bee

short collapsible sword

inspired by the popular ones, i made this myself because i want to sell them. make sure your settings are perfect.

Downloads
4,010
Likes
168
Rating
4.47
P
PrintablesModer

Collapsing Katana, katana, the witcher,sword

katana s desingem the witcher na hraní či na dekoraci

Downloads
3,964
Likes
302
Rating
3
P
PrintablesFlexi-Maker

Collapsing Katana

Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.

Downloads
3,914
Likes
529
Rating
2.4
P
PrintableshannesPrintable

Print in Place Collapsible / Self-Inflating Christmas Ornament

🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…

Downloads
3,695
Likes
820
Rating
4.17
P
PrintablesMarko

Collapsing Pirate Sword (Print In Place) Remix

The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.

Downloads
3,599
Likes
487
Rating
4.92

Lightsaber Collapsible Light Saber with blade retainer

A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…

Downloads
3,437
Likes
666
Rating
4.94
P
PrintablesPlastic Flow

Pocket Sword (collapsible)

This is my silliest design yet, but fun to play with anyways :-) It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket. After printing, inset the 5 parts of the blade into the hilt and close it…

Downloads
3,188
Likes
330
Rating
4.82
P
PrintablesVenomX260

Collapsible Christmas tree fidget toy

Collapsible Christmas Tree Fidget Toy Looking for a fun, interactive, and festive addition to your holiday season? This 3D printable Collapsible Christmas Tree Fidget Toy combines the joy of Christmas with the satisfaction of a fidget toy.

Downloads
3,089
Likes
267
Rating
4.9
P
Printables3DPmom

Popsicle Layered Fidget Toy

Popsicle Layered Fidget Toy 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Supports needed. Print in place. Dimensions of Popsicle: 2.75 in. X 5.5 in. x .75 in. I do not recommend scaling the print smaller due to…

Downloads
2,888
Likes
380
Rating
5

Enma Print-in-Place Collapsing Sword

This collapsing sword is designed to be printed as one part. The multi-part and the replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…

Downloads
2,875
Likes
208
Rating
4.83

Collapsing Print-in-place Lego Katana

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
2,819
Likes
364
Rating
4.83
P
PrintablesEvey Bee

collapsible sword with replaceable blade

collapsing sword inspired by "3d printing world". you can print the blade separately and slide it in the back.

Downloads
2,770
Likes
187
Rating
5
P
PrintablesFeetOffTheTable

Hornet's Needle - Collapsible Sword - Hollow Knight: SilkSong

After some friendly suggestions, I am leaving a ko-fi link here for anyone who wishes to support me, no expectations: https://ko-fi.com/feetoffthetable ***Edit*** - added a flattened point version for anyone who doesn't want a sharp…

Downloads
2,737
Likes
367
Rating
5

Collapsing Clearance Test Print

This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…

Downloads
2,566
Likes
118
Rating
4.91
P
PrintablesMaekri

Collapsing Carrot Sword

In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다

Downloads
2,537
Likes
315
Rating
2.67

Collapsing Scottish Claymore (Print-In-Place)

This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…

Downloads
2,478
Likes
458
Rating
2
P
PrintablesNikoFly

collapsible stool - PRUSA MINI EDITION

I've reworked this design, which I think is brilliant, so that it fits on the mini's bed. I've kept the same specifications as the original model (mechanical spacing and thicknesses) . I added a few fillets and lightened the final piece a…

Downloads
2,477
Likes
326
Rating
0

Collapsing Katana Print-in-Place (Multi-Color)

This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…

Downloads
2,465
Likes
488
Rating
4.83

Dread Pirate Roberts Collapsing Sword Print-in-Place

This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…

Downloads
2,441
Likes
376
Rating
4.82
P
PrintablesMike

Collapsible Christmas Tree V2.0

This is the second version of my previous collapsible Christmas tree design. The first version can be found here: https://www.thingiverse.com/thing:4675040. There are two versions of this Christmas tree: one using the 5-point star as the…

Downloads
2,411
Likes
846
Rating
4.81
P
PrintablesREDZC

Phone Stand foldable Phone Holder foldable collapsible easy printable stojan mobil tested

Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…

Downloads
2,407
Likes
229
Rating
4.8

Rey’s Print-in-Place Collapsing Lightsaber

This version of the Rey’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the on/off…

Downloads
2,322
Likes
340
Rating
5
P
Printableswyatt wolf

Collapsible Lightsaber

Printed this on a Sovol SV06 without too many issues. I had stringing between the blade segments so watch out for that. This would be pretty easy to modify for print-in-place, but I wanted to print the blade in a different color. The…

Downloads
2,291
Likes
196
Rating
4.4
P
PrintablesLoboCNC

Collapsible Cup Holder Spike (print-in-place)

Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be…

Downloads
2,287
Likes
1,123
Rating
5
P
PrintablesDrJones

customizable collapsible wand/stick/pointer/dagger/sword (OpenSCAD)

Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…

Downloads
2,266
Likes
139
Rating
4.63
P
PrintablesAndrea Loddo

Alastor's collapsible staff

Straight out Hazbin Hotel, m eet Alastor, the enigmatic “Radio Demon”, known for his powerful sorcery and status as one of Hell’s most feared overlords. Once a notorious radio host and serial killer, Alastor’s transition to the afterlife…

Downloads
2,245
Likes
194
Rating
5
P
Printableselectrosync

Miniature Collapsible Crate

Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…

Downloads
2,224
Likes
576
Rating
4.61
P
PrintablesWillDeVries

Collapsible Travel Hanger (Print in Place)

Print in Place Folding Hanger Designed to fit on smaller machines while being sturdy enough for most clothing items. Changelog : 11/12/21 Release 11/14/21 Update: Curved files have been added. 3/8/25 Update: Removed confusing files,…

Downloads
2,192
Likes
465
Rating
4.87

Collapsing Celtic Dagger

This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
2,081
Likes
211
Rating
4.56
P
PrintablesW1nter

Deadpool Collapsing Katana

Deadpool Collapsing Katana (Print in Place)

Downloads
1,923
Likes
132
Rating
4.25
P
PrintablesFurysamurai72

Collapsible Darksaber from The Mandalorian

This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…

Downloads
1,857
Likes
391
Rating
4.67

Yoda’s Print-in-Place Collapsing Lightsaber

This version of Yoda’s lightsaber prints in one piece except for the front guard which is printed separately and glued The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…

Downloads
1,845
Likes
311
Rating
4.5