Search results: puller

Nipple Puller

V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*

V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…

Keycap puller

A simple tool to help pulling the keys/keycaps of a keyboard.

Keycap Puller: Print-in-Place

Keycap Puller: Print-in-Place --------------------------------------------------------------------------------- About: Print-in-place keycap puller that safely removes keycaps from a mechanical keyboard Inspired by Nikoraasu's keycap…

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses / Fuse puller

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…

Logitech keycap puller

This particular keycap puller was designed and tested with Logitech G512 keyboard, but might very well work with other models and brands. For the best results use the 0.25 nozzle.

Plant & Weed Puller

Spring has sprung, and a lot of weeds have sprung up with it. Without the use of weed killer, removing weeds from a garden before planting can be a time consuming task. This tool helps with hard to remove weeds by loosening their roots!…

Subaru Liberty/Legacy Gen 4 Replacement Fuse Puller

A replacement fuse puller for storage in the engine bay with the spare fuses. Print instructions Unassociated tags: fuse puller Category: Hand Tools Print Settings Resolution: .1 Infill: 100% Notes: Small object, so shouldn't take long to…

MicroSD Card Puller for GoPro Hero 9/10/11/etc.

This tool was designed to make changing MicroSD cards in a GoPro a lot easier. The MicroSD card slot in the current generation GoPro has a tendency to launch cards across the room/field/car. If you avoid ejection it can be a bit tricky to…

Cable puller with magnet slot

Easy to print cable puller with magnet slots inside. You can use the pre-configured gcode that has pause in right time, or you can add your own pause. I used 3 of 12x1mm magnets inside the slot to have extra strong attraction. You can use…

Nerf foam blaster flywheel puller

Flywheel puller for if you over press your flywheel. This will not completely remove the flywheel. It will pull it flush with the motor stud. Works with a Gryphon with Kraken 130 motor and Kepler flywheel. Needed: 4mm nut and bolt Print…

Compliant Key Cap Puller

This is a keycap puller I designed to be material efficient and quick to reprint since cats seem to keep depriving me of my injection molded ones. (great for using up small strands too) I was worried about scratching, so I tried to make…

fuse puller

Extraction tool for STANDARD & MINI automotive flat plug fuses. This makes changing automotive flat plug fuses child's play!

Stepper Motor Pulley Puller - M3 Screw Version

As I was printing a few things to get ready to upgrade my MK4S to a CORE One, I printed off LarryD's Stepper Motor Pulley Puller without looking at what size bolt he had made it for. I didn't have any M4 hardware on hand so made this…

Arrow Puller

I printed this out of PETG for some added strength and added some foam inserts to grab hold of the arrow. I use it on my 4mil and 6.5 mil arrows but it should work with any size. For the pin in the joint, it’s just long enough to reach…

Mopar 55196762AA, Jeep WJ fuse puller

Mopar 55196762AA, Jeep Grand Cherokee WJ 1999-2004 fuse puller tool. Modelled according to OEM. Stores inside and underhood fuse box lid storage. Tested working even when printed with 0.6 nozzle. If the fuse has stayed in place for 2+…

Honda ATV Choke cable Insertable Nut (Under choke puller on handlebar)

Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…

Keycap puller supreme

This keycap puller is a simple and effective tool for removing keycaps from your mechanical keyboard. It comes in two versions, a short and a long one, to accommodate different keycap sizes and styles. The design is user-friendly, making…

Keycap puller

A very simple key cap puller for computer keyboards. I guess I could have just printed someone else's design but I just made my own in fusion 360. V3 is thinner to get into tighter keyboards

Mechanical keyboard MX switch puller

Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…

Elegoo Centauri Carbon Nozzle connector puller. Left-side with Handle

Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.

Elegoo Centauri Carbon Nozzle connector puller. Right-side with Handle

Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.

Guitar Knob Puller

This is a easy printable tool to safely remove guitar knobs by allowing you to equally apply upward pressure to remove it. Also, using plastic will not scratch or harm your guitar compared to prying it off with a screwdriver or pliers.…

Zipper Puller

28 mm paper clip is used as a base 🖇. Simple design made in fusion 360. Instead of a paper clip, you can use a piece of wire. When assembling, use glue 💧 It is better to place the paperclip so that its ends face the inside of the hexagon…

Extruder drive gear removal tool (puller)

When planing extruder upgrade on my Creality Ender 5 Pro I discovered that drive gear is push fitted on the shaft and there is no easy way to remove it (WD40 + pliers didn't work). So I've designed a small tool (a puller) to remove the…

TPU Panty Puller

TPU Panty Puller (BETA) by Qwerm Is your THICK magazine to much for that TIGHT little mag pouch to handle? A magpul-like magazine puller based on Weapons Grade Waifu's panty magpuls that they no longer sell. I'm considering this release…

Keyboard Key-cap Puller - two versions

Sometimes I like to try out an idea in 3D printing even though I think it may not be the best choice for a particular application, because it helps me to test the limits of what is possible. With that in mind, I can say that these key-cap…

Wheel bolt cap puller tool VW Audi Seat Skoda

Thing name says it all :) Print Settings Rafts: No Supports: Yes Category: Tools

hair puller/cutter

for the ease of removing hairs stuck in wheels, brushes or any rotating object that can tangle them

Keycap puller that won't scratch your keycaps

I needed a keycap puller that won't scratch my keycaps so I 3D modelled one that resembles the popular one with metal wires. You need to print two pullers and insert them into the holder. They have holes so you can stick a piece of…

V2.0 Universal Keycap Puller [Apex 9/Pro Replica]

This keycap puller is a V2.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of keycaps without risking damage to the keycaps. This is an upgrade of my…

Fuse case and puller for low profile and mini car fuses

This is a single piece case to hold 40 mini or low profile mini car fuses and a printable fuse puller. I printed in PETG on a MK3S+ using PrusaSlicer's 0.2mm settings.

Elegoo Centauri Carbon Nozzle connector puller. Right and Left combined

Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…

Nail Polish Shaped Can Tab Opener / Soda Puller

Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…

Fuse puller keychain tool

for full size automotive fuse

Keycap puller

Thank you for looking. Please like, share and download.

Key puller

A simple keycap puller

Bridge Pin Puller for Acoustic Guitar

When I went to change strings on an old guitar I had trouble getting the bridge pins out. I scuffed them up with my needlenose pliers and also pinched my fingers. This is a small lever that fits around the bridge pin so that it's easy to…

Elegoo Centauri Carbon Nozzle connector puller with USB shaped handle

Uses the original model and adds in a USB sized handle to make for easier storage and purchase when in use.

X-axis Rod Puller

When you have to take your x-axis apart to replace the bearings and/or rods, this printable rod puller makes it a little easier with some spare hardware from your spare parts bags. All you need in addition to printing the parts with PETG,…

Guitar String Puller

Easy to use compact tool for whenever you restring your guitar. Easily slip the far end of the tool under any string while resting the proximal end on top of the string. Add leverage to stretch the string as you slowly move up the fret…

CAT6 inline snag-free cable puller

For pulling CAT5/6/7 cable snag-free through other mess of cables / drop-ceiling / raised floor Works when pulling just one cable out of a mess of cables, or when pulling a new cable through to replace a broken cable. Note: Always use…

Automotive / Car Fuse Puller

The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…

Corsair K70 Key Cap Puller

The key cap puller that came with Corsair K70 Keyboard broke. So I modeled an exact copy. Make sure to sand lightly around the arms so the keys don't get scratched when you pull them. Category: Computer

Puller Nozzle Heater and Thermistor Connector Elegoo Centauri Carbon -Updated16Feb26-

Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…

Keycap Puller compatible with corsair wrist rest

Designed a replacement keypuller for my Corsair wrist rest that I have on my K95 keyboard. Fits perfectly in the existing location so its perfect if you've lost or broken yours. It also works great as a general use key puller, PLA and…

Elegoo Centauri Carbon Nozzle connector puller

Centauri Carbonのノズルのコネクター取り外しジグです。 配線を引っ張ると壊れる事例があるようなので作りました。 This is a jig designed to remove the nozzle connector of the Centauri Carbon. I created it because there have been cases where pulling on the wiring caused damage.

Stealthpress Keybak Replacement Doorpuller

Cheap keybak alternative: https://www.amazon.de/ZDNT-Automatischer-T%C3%BCrschlie%C3%9Fer-Automatisch-T%C3%BCrschliesser/dp/B0BQRGTR8B Even cheaper when buying from aliexpress: https://www.aliexpress.com/item/4001346125084.html 800gr or…

DJI Mini 2 Battery Puller

A practical, small, easy to use battery puller. Snaps on with a firm satisfying "CLICK" and easily slides off. Easy to hang on to, but small enough to clip on to your drone bag or keep in your pocket without losing it. Based off this…

[Experimental] Kailh Choc V1 Switch Puller

It is still experimental! For now, please only print it if you own a 3D printer. I'd be happy about feedback. This is a switch puller for Kailh Choc V1 (PG1350) Switches. It will only work with switches in a plate. Layer height doesn't…

Keyboard Key Cap Remover/Puller

I lost mine so I modelled one up. It's designed to slightly bend and then hook itself under the keycap. You only need to hook one end and the friction alone on the other side will give it a secure enough of a grip to remove the keycap. I…

Tent Stake Puller and Tent Stakes

I designed this tool as a handy way of pulling tent stakes from the ground. Use the long claw to get the stake started and use the smaller hook on the back to finish pulling the stake. Printing: The handle components should be printed…

SFP Transceiver Lever Puller

I made this to more easily lift the lever on SFPs inserted into densely packed ports. Happy making! For what it's worth I printed mine in ASA and those little fingers are plenty strong.

Keyboard Cap Puller

It may be smart to print in PETG or Nylon, it works in PLA but is more susceptible to failure.

Shibari Rope Puller

A simple hook for grabbing rope and pulling underneath bands or cuffs for shibari or other rope bondage. This was designed as an accessibility aid for those with reduced finger mobility and strength, but helpful for anyone dealing with…

Fuse puller for AGC type glass fuses

Fuse puller for AGC type cylindrical glass fuses. Remix of thing:4833779 Category: Tools

Stepper Motor Pulley Puller

When disassembling the MK4s to convert to the CoreOne one of the pulleys was stuck on the motor shaft. Instead of yanking on the shaft I designed and printed this simple puller to print on the Mini+. Printed in PETG with 40% fill, flat…

Fuse puller

Simple yet effective fuse puller for your car.

Film Negative Puller

Have you ever experienced plastic print-file style film storage pages and how tricky it can be to insert/drag out a negative when there's a humidity in the air? Use this negative puller to pull them out or drag them in. Category: Camera

PET strip straightener for PET Puller

There are two models: the loose one - in the pictures - is for normal thickness PET bottle strip, the other is for thin PET strips (on normal thickness, it creates quite some friction ). Printed in PETG, for smoothness, 0.28mm layer, 3…

Bicycle hub axle end cap puller for 19 and 21mm endcaps

Suggested to me by Dave Rome of CyclingTips ( @romeandstuff on Instagram) when he noticed a similar tool in the CeramicSpeed hub bearing tool kit . The tool slips over press-fit end caps found on many hubs, especially those with 12 and…

Parametric keycap puller

Yet another keycap puller, this time in OpenSCAD. Use this to remove 18mm Cherry style keycaps without damaging the stem or stabilizers. You don't want to break your fancy keyboard while removing Hot Pocket and Cheetos crumbs, do you?…

Keycap Puller | Tastenentfernen | Tastatur

Schnell und einfach die Tasten deiner mechanischen Tastatur entfernen.

608 Bearing Puller

Pretty straightforward here, I used PLA no supports 80% infill, you will need a m5 X 50 screw and nut.

Ferris Wheel Puller for PET pulltruder machines

I have been using a pulltruder ( PETamentor2 by Ondřej Šraitr ) for almost a year now, and my biggest pain point was that after every PET bottle that I converted into 3D printer filament, I had to unwind it from the puller spool, and…

Keycap Puller / Stacker

A few people have been talking about keycap pullers with a stack component in the Mechanical Keyboard space. I quick designed one in tinkercad as none of them were free. So heres one thats free. The purpose of this is to be able to…

Arrow Puller

I've made two version of this arrow puller, that needs to be printed with a flexible filament. The original (photo) and a mk2. The mk2 is wider in the center and has secondary grooves for fat arrows. Print Settings Printer Brand: Prusa…

Windshield Wiper Arm Puller

Print with some strong settings. I printed this with 3 perimeters, 50% infill, PETG, 0.6 nozzle. I printed it on its side (as seen in the picture and also add some supports to help keep it on the bed). When I used it, the plastic bent a…

Switch Puller for Cherry MX Style Switches

Switchpuller for CherryMX switches. Prints fast and is sufficiently rigid while slim enough to not collide with neighboring switches. Adjacent keycaps have to come off for it to fit. Print with a 0.4mm nozzle and manually place the seam…

keycap puller

simple keycap puller

Keycap Puller

Remix with deeper feet

Slot Car Pinion Gear Puller

Puller for slot car motor pinion gears. You will need a 1/4-20 bolt and nut to complete the thing. Step file included so that you can modify as necessary. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…

Zipper Puller using paperclip

Remix of the hamano's paperclip . We only had the kind of paper clips in the pictures and many of the already done paper clip pullers did not fit to them, so I made my own from scratch. All the credits should go to the original creator…

PET bottle recycling puller

This is my version of PET bottle recycler gear reduction machine designed to pull and wind string made from recycled PET bottles. you can see assembling process here: parts you need: Screw M3x20 Screw M3x10 Bearing 608 4x 8mm shaft 2x

Puller V2 for FLSUN V400 printers

To assemble the puller, you need an rubber band. Just put the two halves together and screw on the nut. Put the rubber band in the grooves in two or three layers. In V2 roundings on supporting surfaces have been removed. The stability of…

Switch Keycap Puller

Switch Keycap Puller

Glass fuse puller

Tool for removing glass fuses

Nextruder Silicone Sock Puller for MK4S and MK3.9S

The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…

Trumpet Mouthpiece Puller

A neighbor's son had gotten his mouthpiece stuck in his trumpet late on a Sunday evening and we were unable to remove it. Searching online I noted a variety of simple ‘puller’ options available for purchase and wondered if I could model…

Jump Gym Ball Air Stopper Plug Pin With Plug Puller

Recomended for SLA print.

Lawn Weed Puller

As I was trying to pull some weeds from my lawn without pulling up the grass, this idea came to me. This tool lets you pull leaves and stems of broadleaf weeds while leaving the grass alone. This does not pull the roots out (maybe it will…

Zipper puller for backpack

My wife lost one zipper puller on her backpack, cord just pulled of it, so I printed replacement. Initially I created two part piece with idea to put cord and assemble afterwards. But after some tests I realized that solid piece will be…

Uk 3 pin Electrical Plug puller for the disabled/elderly

I saw something like this some years ago, and as my Mother is now becoming frail I decided to update the idea, to a solid object. The 3 pin fit is snug, to stop the plug falling out when removed from socket, and stops fingers or objects…

Minimal Keycap Puller | Mechianical Keyboard Caps

BOM: Printed with ROSA3D Starter PLA Black A must-have utility tool for any mechanical keyboard enthusiast! Clean your board or swap out your keycaps instantly with this lightweight, support-free design. This keycap puller is specifically…

Christmas Light Bulb Puller

Simple tool to pull miniature light bulbs from strings of lights.

Entladehammer Verschluss / Inertia Bullet Puller Screw Cap

Drucktipps Sie können die Kappe mit dem kleinen Loch auf das Druckbett setzen. Keine Supports erforderlich. Empfehle einen äußeren Rand. TIPP: Wenn Sie das Loch schließen möchten, damit Pulver nicht versehentlich ausläuft, können Sie…

Puller tab for bag zipper

Edit The standard piece has a 0.2 clearance in the carabinier, in my case it opens just fine after a little initial resitance, but I added 0.3 and 0.4 clearance versions in case the standard ones bind too much on different…

JST-XH plug puller

I got tired of destroying my fingers trying to pull/wiggle stubborn JST-XH plugs out of their sockets, or destroying the plug by trying to grip it with pliers. This simple tool securely grips 2, 3, or 4-pin JST-XH plugs (2.5mm pitch)…

Kia Soul Fuse Puller

Lost the fuse puller for my 2016 Kia Soul. When I found it again, I decided to make sure I had an extra. Not an exact match, but it does fit in the storage location in the under hood fuse box and will pull fuses as expected. My print was…

Drawer / door / handle / knob / puller

Just a drawer / door puller. Print Settings Printer: Hypercube Hevo Rafts: No Supports: Doesn't Matter Resolution: 0.15mm Infill: 25% Filament: Generic PLA White Category: Replacement Parts

J Case Fuse Puller

for pulling the box shaped j case fuses with 12/10mm body Category: Automotive

Keycap puller remix - thinner arms

Print at 0.2mm layer height, 5% infill, two walls.

Hoodie string puller

Tool for pulling a hoodie string back around. Can be used with (hopefully) any round string Very easy to print, very easy to use Printed in PETG, not tested in PLA yet, but should work out fine, about 15-18 minute print time For how to…

Leather Fork Puller

Simple design, but very useful - especially for larger chisels. Filleted to avoid imprints. Printing 0.20mm Material: PLA/PETG Infill: 15% Supports: no Brim: no

BMW E60/E61 MHD Puller

Just mocked up a simple MHD puller that makes it easier to take it out. This was designed for a 5 series (e60/61) as it is extremely hard to get this out without using a screwdriver or something similar. Printer: Prusa MK3S/+ Material:…

Sinew Puller

Summary This model represents an innovatively designed sinew puller, optimized for tie-dye artists who require a reliable tool for applying tight, consistent pressure to sinew or rubber bands during the dyeing process. The tool's…

Gear Puller

100mm Mechanical / Gear Puller

Nerf flywheel puller for Kuryaka flywheels (Daybreak, Kepler, Pulsar)

3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…

Airsoft AA 1911 Magazine Puller

Print at .2 resolution 100% infill. No supports

RCBS Bullet Puller Organizer

This part keep you collets and die parts better organized in the RCBS box. It is reversible if you prefer the die on the other side. Category: Tool Holders & Boxes