37 models
I wanted to double stack large spice bottles using the Spice Rack Pullout by SpongyBob so I made a version of the larger bottom part that can stack. You'll still need all the other pieces of the original set to use along with this part.…
Print approx. €8.12–€9.92 excl. taxPreliminary estimate for one variant
I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I wanted a better way to organize the spices in a cabinet but having it occupy a limited amount of space. I designed this pullout…
I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I redesigned my original Spice Rack Pullout I designed this pullout spice rack to allow for one, two, or three pull out shelves for…
ABS, PETG, PLA are OK. Better to have supports on overhangs of top & bottom shelves. As someone commented, i should clearly mention that top part is higher, than original. Beware: top part of this item is 132.6 mm in height!
With this fully parametric remix you can customize the dimensions of SpongyBob's original Spice Rack Pullout design. Want to use wider spice containers? Need a taller version of the top shelf? No problem at all, just follow the…
Printed on PETG to be a bit more durable. 0.4 Nozzle 0.12 layer height 50% infill Might need a bit of “X-Y Hole compensation” based on tolerances. Printed on Bambulab P1S
This is a remix of this design: https://www.printables.com/model/58718-spice-rack-pullout Thanks to the original creator. This spice rack was what I was looking for, but I needed to mount it from the top, so i modified it on fusion360 and…
This is a snap connector and pin to connect the parts of the spice rack (https://www.thingiverse.com/thing:4356449) together. They replace the need for a screws, washers, and/or book binders as mentioned in the original design. I have…
I've watched the Spice Rack Pullout by SpongyBob for a while, and finally decided to make it fit the 30 spice jars I bought off Temu a while back.
This attachment fixes the “Failed to pull back the filament to AMS” error. I loved the concept behind @TheTexMech original version but I want a fan of the process used to design it or the end result. So I went ahead and designed this…
Native model: Onshape Model Play with dimensions in the part studio “parts” tab configuration. Global variables also available in the variable studio.
I needed a compact way to store my nail polishes so I made this model based on a spice storage rack. I used command strips to attach it to my cabinet but it could be easily adapted to attach with screws by adding a few holes to the bottom…
UPDATE 10.1.25: Under the download section is now a installation manual available. UDATE 1.12.24: After the hint of @GabrioB_1701666, that the STL still don't match the STEP file, I generated all of them new out of the CAD and replaced…
This attachment fixes the failed to pull filament messages, put the higher tab at the rear so that it cant break off when moving to the front rail to do a Filament Cut Printed in PETG for some flex but at 99% infill Want to buy me a Slice…
I needed a spacer to allow the pullout spice rack to fit over the lip of my cabinets. I probably could have designed it to use a whole lot less filament.
Should glide a little bit smoother in the tracks, and now has the ports closed off on the visible side.
I needed a taller than original top shelf but shorter than existing remixes. This remix is 108 mm tall with 100 mm space for spice containers. Images included show the remix mounted with original design parts.
3D printed fastener so no fender washers, book binding posts or nuts and bolts are needed to attach the spice holder to the slider.
Der Griff eines Ziegler-Geräteauszuges war defekt und konnte nirgends bestellt werden. Deshalb habe ich den Griff nachgezeichnet und 3d-gedruckt. Ich habe 3 verschiedene Modelle hochgeladen. Ein Modell, dass möglichst nahe am Original…
Study kitchen spice pullout rack. This can fit 5x 3.75oz spice containers, or 6x 3oz containers. Pulls out super smoothly and rotates 360 degrees to reveal all spices in the rack. Contains an upper and lower compartment to store 2 layers…
I remixed the middle shelf for those of us that don't need/want the upper frame part. I removed the upper holes, thus allowing for some more structural strength above the rod locations.
Base Cabinet Pullout 2 Tier Cookware Organizer https://www.rev-a-shelf.com/p-174-base-cabinet-pullout-2-tier-cookware-organizer-sink-and-base-accessories.aspx This is the Clip that holds the vertical racks on the bottom shelf. Can't seem…
First of all @SpongyBob_8783 is a genius! I just needed a shallow rack for a lesser depth in front of the cooker hood exhaust. The 134x134 measurement is the area of the track. This model has no endstop, and i also opted out of the…
This remix I made for myself for all the Verstegen spice holders we had in our kitchen. And thought to share it. We had a lot of Verstegen spice holders in our kitchen (we like cooking with them a lot!). So after searching and testing, we…
It is compatible with the original design's dimensions. The assembly holds together fine with friction (I used M3-threaded rods), but I found that a drop of superglue in each hole helps with the overall sturdy feel.
You need to use supports since it has the narrow base to fit the original track.
We had some drawers start to pull out due to the original stoppers falling off so I designed some new ones that didn't need to be bent out of the way to remove the drawers, hopefully they will last a bit longer. I printed mine from PLA…
I made this because of the style of the faucet and the style of my sink. My sink has a smaller end to the left and a bigger/deeper end to the right. The reason why this faucet with this style sink makes it an issue is because of where the…
I made this model for my mothers kitchen
This follows the curves of the Rev-A-Shelf lids to add a minimal handle to the top of them. When your hands are covered in greasy gunk the last thing you want is a super slick lid that you can't grip. This fixes that design issue. This…
This is a gauge for Junker KV1-45-H45 drawer pullouts or similar versions (e.g. SO-TECH KV2) It should fit for length from 400mm to 750 mm and covers the first two holes for the drawer (S) and the furniture body (K). This way its much…
Our kitchen cabinet pullout drawers would often get hooked onto the cabinet door when pushing in the drawers due to the drawer face overhang. This slide attaches to the side of the pullout drawer so that if the door is slight closed with…
can be printed out of whatever, just be sure to enable supports. Insert a generic 3x1 gridfinity base into the bottom
Native model: Onshape Model Play with dimensions in the part studio “parts” tab configuration. Global variables also available in the variable studio.
You need to use supports since it has the narrow base to fit the original track.
Study kitchen spice pullout rack. This can fit 5x 3.75oz spice containers, or 6x 3oz containers. Pulls out super smoothly and rotates 360 degrees to reveal all spices in the rack. Contains an upper and lower compartment to store 2 layers…
This is a snap connector and pin to connect the parts of the spice rack (https://www.thingiverse.com/thing:4356449) together. They replace the need for a screws, washers, and/or book binders as mentioned in the original design. I have…
