Search results: rce

Sort order

6,506 models

P
PrintablesPrism08

Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale

November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
2,726
Likes
416
Rating
5
P
Printablesdanny520

Print in Place Mercedes-Benz G-Class

Print in Place Mercedes-Benz G-Wagen G 63. Took almost 16hrs to print at .16 layer height with %15 infill used about 76 grams of filament. no supports needed but it may get some stringing around the pillars.

Print approx. €11.05–€13.50 excl. taxPreliminary estimate for one variant

Downloads
1,559
Likes
114
Rating
5

Ikea LACK Reinforcement

No support needed. Use 4x20 mm wood screws without predrilling.

Print approx. €6.55–€8.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,531
Likes
325
Rating
5
P
PrintablesGFS

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,463
Likes
121
Rating
4.83
P
PrintablesJADV

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,253
Likes
236
Rating
4.97
P
PrintablesHEXApd

Nike AF1 - Air Force 1 shoe lace lock

This is a shoe lace lock for Nike Air Force 1 shoe i made :D

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
546
Likes
36
Rating
2.5
P
Printablesflatsixguy

Settlers of Catan resource card holder/tray

This tray fits cards ~68x45mm which you can find in the german version (Kosmos). Not sure about other versions. It's a remix of thing:4703126, which was made for slightly wider cards from international versions (had to find it out the…

Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant

Downloads
455
Likes
105
Rating
4.86
P
PrintablesSpruce&Squirrel

Flamecraft Resource Tokens

Resource Tokens for the board game Flamecraft. They fit in laser-cut player boards designed for the original wooden tokens! Printed with 2 layer changes so they are dual-coloured on both sides. Project files for PrusaSlicer (.3mf) and…

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
411
Likes
106
Rating
4.67
P
PrintablesEcoDad

Better Wyrmspan Resources

Better than cardboard Wyrmspan Resources Wyrmspan is a 1-5 player game from Stonemaier Games where you build and explore a cavernous sanctuary for dragons, based partially on the popular game Wingspan. I have created 3d printable versions…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
405
Likes
55
Rating
4.5
P
PrintablesJeepingJohnny

Universal Phone and Tablet Stand "Reinforced Tabs" Print in place!

Made the tabs much stronger and made a few small improvements overall to the model. Tabs should not break off! Galaxy Black Prusament! Print in whatever you like! PLA

Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant

Downloads
349
Likes
40
Rating
4.83
P
Printablesmarroquino

Car brand's Logo (BMW,Mercedes,Toyota,Citroen,VW)

In this model we have the top 5 car brands sold in portugal. This design is just wall art althought it can be used for other purposes. Download your car logo and stun everyone with your 3D print! More car brands will come in the next…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
9
Rating
0
P
Printablesmnemic

Anno 1800 - Board Game Token Upgrades - Resources and population tokens

Custom-made upgrades for the components for the board game Anno 1800. I sprayed them with some metallic-like coatings to get a nicer sheen on them. For the gold ones tokens I included both an embossed and a debossed version, but I…

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
49
Rating
5
P
PrintablesDlteck2000

IKEA Hemnes 110364 renforced

Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
277
Likes
14
Rating
5
P
PrintablesBurt Simpson

Reinforced Jar Opener 85 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 85 mm model in the collection. Printing…

Print approx. €5.11–€6.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
249
Likes
14
Rating
5
P
PrintablesTeo_211

Mercedes AMG GT black series Wall Art

Wall Art Silhouette model of the Mercedes AMG GT black series. Adjustable size. I accept model suggestions or ideas.

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
219
Likes
51
Rating
5
P
PrintablesDany Sánchez

FC Barcelona Jerseys Keyring - Nike eras 2004 - 2025

🟦🟥🟦🟥🟦🟥🟦🟥🟦 ⚽ Visca Barça! 🏟 🟨🟥🟨🟥🟨🟥🟨🟥🟨 Nike is the current partner of FC Barcelona for kits and apparel, creating some of the most iconic jerseys for decades now! Here are some of the most memorable ones since 2004, when a golden age of FC…

Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant

Downloads
211
Likes
16
Rating
0
P
PrintablesAMDbuilder

Needlepoint Corner Reinforcer

An alternative design for supporting needlepoint stretcher bars, without requiring the use of tacks. Helps to ensure the frame remains rigid and straight. The design works with mini (12mm or ~1/2") stretcher bars but can be resized for…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
16
Rating
0
P
Printablesxenon

XL Filament Sensor - reduced force

the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
148
Likes
23
Rating
5
P
PrintablesJohan

Reinforced IKEA ALEX drawer

Easy and relative inexpensive way to reinforce your IKEA ALEX drawer. Needed if you use the drawer to organise screws etc. The connector is made to fit with GAH-Alberts 474409 aluminium U-profil 20x10 mm. Cost 4 Euro/1 meter at Amazon. As…

Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
144
Likes
47
Rating
5
P
PrintablesTeo_211

Mercedes C123 Coupé Wall Art

Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
25
Rating
5
P
PrintablesDieguito

3d Map Sagrada Familia (Barcelona) Spain

3d map of the Sagrada Familia and its environs In a 3d map with the reliefs of the city and the surroundings of the monument (it is a similar representation by copyright).

Print approx. €11.00–€13.45 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
13
Rating
0
P
PrintablesAngus B. Clark

Infill Percent Swatch

A remix of the original model (linked below), I wanted a simple one-click print solution for an infill-percentage swatch. Print in two colours to get the nice effect! Solidworks model is also included should you wish to modify it further.

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
32
Rating
0
P
PrintablesMatthew ")

mercedes keychain

easy to print !!!

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
123
Likes
4
Rating
0
P
PrintablesBurt Simpson

Reinforced Jar Opener 73 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 73 mm model in the collection. Printing…

Print approx. €3.98–€4.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
100
Likes
9
Rating
0
P
PrintablesFuturaprint

Mercedes 190SL Car Wheel: Elegance and Performance Combined!

Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
5
Rating
0
P
PrintablesBroederbenny

Dragon’s Fang Wizard Staff – Channel Your Inner Sorcerer!

🐉 Dragon’s Fang Wizard Staff – Channel Your Inner Sorcerer! ✨ Summon storms, control elements, or just rule your living room in style with the Dragon’s Fang Wizard Staff ! With a fierce dragon wrapping around a glowing arcane orb and an…

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
17
Rating
4
P
PrintablesVorpal

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
9
Rating
0
P
Printableslytta

Triforce Bobby Pin Clip

I thought I'd use a simple triforce design to test this method for making a print that is easy to clip on with a bobby pin. I ended up putting in a bit of extra attention to making the hole less visible so it doesn't break up the triforce…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
55
Rating
0
P
Printablesfluetke

Renkforce RF100 Part-Cooling duct

I found the available fan-attachments for the RF100 take up to much space around the printhead, and also sometimes don't produce enough airflow. This cooling solution utilizes a radial fan design and can be attached to the printhead using…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
10
Rating
0
P
PrintablesMagic Printing

Mercedes-Benz writing & Logo keychain

I made it myself because I love cars

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
4
Rating
0
P
PrintablesGFS

Keychain with logo. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Keychains in various versions. Keychains modeled after the seat belt alarm lock Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
3
Rating
0
P
PrintablesHarbach

Makita Vacuum Head Reinforcement (2mm version)

I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part). This redesign features a uniform 2mm…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
12
Rating
5
P
PrintablesFokieH

Prusa MK4 & MK4S Zwangsbelueftung / Forced ventilation

Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
37
Rating
5
P
PrintablesDarius V

Magnetic tray (with source files)

Very simple and easy to print magnetic screw tray with 9 integrated magnets. Magnets are snuggly press-fitted, so glue is not necessary. There is also an optional 1 layer thick sheet, that can be used as a cover for the magnets. It also…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
16
Rating
0
P
PrintablesR.R.

Mercedes-Benz 300SLR Mille Miglia, 1955

1927 entered into history as the year of birth for the Mille Miglia, the famous 1,600 km racing course through Italy. By 1930, the name of Mercedes-Benz was closely bound up with this endurance race. And the first victory came in 1931 for…

Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
5
Rating
0
P
PrintablesCobalt3D

US Air Force Weapons School Graduate Patch Magnet

Magnet of the US Air Force Weapons School Graduate Patch. Designed to fit small 6mm x 3mm magnets. Base layer should be grey. Red on patch is painted with red acrylic paint. G-Code has multiple layer pauses in it: 3.8mm: add magnets…

Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
10
Rating
5
P
PrintablesMarMir

Jack stand pad for Mercedes Benz W206

Must be printed with PETG (or stronger material), with 100% infill for stability. PETG print must withstand compression pressure 10 MPa (i.e. 1kg/mm2; the pressure area must be at least 1500mm2 - so make sure your jack stand fits…

Print approx. €9.41–€11.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
14
Rating
0
P
PrintablesR.R.

Mercedes-Benz SSK Black Prince (1934)

Count Carlo Felice Trossi came from the Gaglianico noble family in Biella of northern Italy and was born in 1908. As a motor sportsman and racing driver, he was elected Vice President of Scuderia Ferrari 1931. Gifted at the driving wheel,…

Print approx. €6.09–€7.44 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
7
Rating
0
P
Printablespalladin

Mercedes-Benz Heater and Control Knob inside

Inside of older MB cars knob. Sometime need small adjustment by knife :-) PETG - 15mm

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
4
Rating
0
P
PrintablesJoergH

Sicherheitsgurt Warner Alarm deaktivierer muter silencer Mercedes VW BMW Polsterschutz

Deaktiviert die lästige Frage im Fahrzeugdisplay nach dem Anschnallen hinten und dem OK bestätigen. Drei davon drucken, hinten in die Gurtschlösser stecken und es ist Ruhe… Meine Lösung ist klein und geht “um die Ecke”, damit man sich die…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
3
Rating
0
P
PrintablesAndreas Otto

VRS DirectForce Pro Wheel Base Power Switch and E-Stop

Be careful when pressing the M3 nuts into the base plate to prevent it from cracking. Softening the stubs with a heat gun helps. Connections: Pins 1 + 2: E-Stop (NC – opens when pressed to stop the FFB) Pins 3 + 4: Power (NC – opens to…

Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
10
Rating
0
P
Printablescyrus31

porte serviette pour sèche serviette+renforcer

idéal pour les familles nombreuse qui ce batte la place sur le sèche serviette. les cotes sont ceux d'un modèle standard de sèche serviette. modèle renforcer en plus au cas ou vous avez des brutes dans la famille. je vous donne le g-code…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
7
Rating
5
P
PrintablesBlackFury

Resource Containers for Board Games V2

I made this to hold the cubes from Lords of Waterdeep, but I figure it can fit many more games (Pandemic for example). It is a container to keep the resources organized. 60mm in diameter; 30 mm in height; around 28 mm in depth. The gcode…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
7
Rating
5
P
PrintablesV.Chadima

Hueforge Mercedes Benz AMG GT

I am learning with the Hueforge software, so I decided to share some of my work with u guys. Size is 200 x 133 mm It will take about 6 hours. You're gonna need these filaments: - Prusament PLA Jet black - Prusament PLA Pristine white -…

Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
8
Rating
0
P
Printablesh2odragon

Use The Force Signs

In honor of Star Wars day Works well in two colors, as with the included gcode file. Also see the Shadowbox Frame , which this and the rest of my sign collection fit. The Star Trek version may be handy if you're related to Mark Hamill or…

Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
7
Rating
0
P
PrintablesBurt Simpson

Reinforced Jar Opener 27 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 27 mm model in the collection. Printing…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
3
Rating
0
P
Printablesel

Mercedes Key Holder/Hanger

I needed a simple place in my shelf to put my Mercedes key into, therefore I designed this super simple holder that works both ways on a vertical mount (the keys stays in place either way) or can be mounted horizontally. The key is in a…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
3
Rating
0
P
Printablesfluetke

Tool-Holder for Renkforce RF100

The Renkforce RF100 is really an interesting little machine, sturdy, cheap and comes with a set of tools for printing - tools which would soon be found all over the place. Time to do some tool management. This Toolholder is small enough…

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
1
Rating
4
P
PrintablesChitoku

Reinforced Trigger for SO-100/101 Arm

The original trigger for the SO-100/101 arm is prone to breaking at the “neck” — specifically, the two slender posts that connect the trigger ring to the base plate that mounts to the motor. This redesigned version reinforces those two…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
3
Rating
5
P
PrintablesDvG3DAtelier

Dust Filter for Core One Vents – Reinforced Remix with Dovetail Connection / Staubfilter für Core One Lüftungsschlitze – stabiler Remix mit Schwalbenschwanz-Verbindung

This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
13
Rating
5
P
PrintablesLukas

Reinforced camping gas stove adjustment knob

My lovely co-worker blessed me with another project :). The original knob of her camping gas stove broke due to thin walls and years of usage. My design is a snug fit and has thick walls. It is recommended (but not really necessary) that…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
5
Rating
0
P
PrintablesChris Ne

Mercedes EQC Keychain

colorchange at layer 6 Glue the to sides together. Gcode for demonstration. PLA + for better results. I would be very happy about a Make, Like or Share! Happy printing!

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesAinon3Dtisk

Priests, sorceresses, novices, mummies

Hello, Today I have for you Priests, Sorceress, Novice, Mummy or whatever you wish. Suitable for board game figures, or just for a diorama. It is fully authentic, suitable for coloring. I used PLA/PETG Basic as the material No need to use…

Print approx. €9.12–€11.15 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
8
Rating
0
P
PrintablesAn12854

Logitech Driving Force GT Clamp Key

Re creation (not remix) of https://www.printables.com/model/216076-tightening-key-for-the-logitech-driving-force-gt-w Made for easier printing and added comfort Printed at 0.2mm layer height with 30% zigzag infill Also added .ipj file for…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
1
Rating
0
P
Printableselectry

Parkside vacuum cleaner PHSSA 20-Li D2 – Reinforced Dust Container Latch Repair

The original opening/latching mechanism on our Parkside PHSSA 20-Li D2 cordless handheld vacuum cleaner broke during normal household use. Instead of replacing the entire dust container or throwing the vacuum cleaner away, I designed this…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
8
Rating
0
P
PrintablesHerrTheiss

Eierpiekser / Eggpiercer HSV

Ein Eierpiekser für Fans des Hamburger Sportvereins! Dreiteilig, wobei Teil3 einen Farbwechsel von Weiß auf Schwarz bei 3,8mm braucht. Außerdem benötigt wird: eine relativ schwache Feder, die über den Zapfen in der Grundplatte, und in das…

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
1
Rating
0
P
PrintablesMrGira

Antares - Gotcha Force

I suggest printing slowly with a matte PLA in order to hide layer lines. Almost all the parts require glueing with super glue. Print with organic supports.

Print approx. €11.16–€13.65 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
3
Rating
0
P
Printableshakkaisha

Reinforced Screw‑Through Ceiling Hook

Overview A compact, support‑free hook for hanging baskets, rings, or tools from the underside of a shelf or ceiling. Designed by hakkaisha for people who want a quick, strong, and low‑profile hanger that installs with wood screws and…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
6
Rating
0
P
PrintablesFilLuk

Wieszak do modelu Mercedes-AMG F1 W14 E Performance

Model do powieszenia Mercedes-AMG F1 W14 E Performance

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
6
Rating
0
P
PrintablesFokieH

Peg Perego Ground Force Power Winch Adapter / Seilwinde

Hier findet Ihr ein Modell eines Adapters für meine PegPeregoAnhängerkupplung um auch an dieser die originale Seilwinde verwenden zu können. Gedruckt wurde das ganze aus PETG auf einem Prusa MK4S mit Stützmaterial. Viel Spaß beim Drucken.…

Print approx. €7.81–€9.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
4
Rating
0
P
Printablesnem

Reinforced webcam holder for MK3/S/+ MK4/S/+

PETG recommended with at least 15% gyroid infill, 2 horizontal and 3 vertical shell layers. Supports recommended but not required.

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
1
Rating
0
P

Pierce seatbelt buckle

Pierce seatbelt replica. Fits Ascendant and most modern engines.

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
0
Rating
5
P
PrintablesOčko

car registration plate_SPZ_BUDDY TOYS_MERCEDES_AMG_GLE_63

name for the bouncer printed by PETG Layers 0.2mm total height 1.2mm filament replacement after 3 layers added small cleaning tower, prints the first small square when changing the filament. text editable in Prusa Slicer

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesJC

Ford Police Interceptor Utility Vehicle - Sun Visor fix.

Ford Police Interceptor Utility Vehicle - Sun Visor fix. This vehicle has hide away lights attached to the sun visor. Old factory metal clip finally gave up with the extra weight of the hide away lights. This part was printed with…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
4
Rating
0
P
Printablesh2odragon

Commerce sign

100x160mm sign, reading "Commerce profits both parties" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
2
Rating
0
P
Printablescmos

rain barrel tap-reinforcement | Wasserhahnverstärkung für Regentonne

strengtheness the standard plastics taps on water barrels, increased wall thickness of the design, 3 to 5mm.

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
0
Rating
0
P
PrintablesVSVlab

Micro griffe ouvre colis. poids 0.4 g / Micro-claw parcel opener.

FR La micro griffe est un ouvre colis de dépannage Rapide, facile, ultraléger, économique. Il n'est pas fait pour ouvrir des dizaines de colis à la suite, pour ça il est préférable de le faire en métal. Il est là pour vous dépanner quand…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
1
Rating
0
P
Printablesprntmkr

Parcel Opener – Safe, Durable & Blade-Free

Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…

Downloads
24,270
Likes
4,459
Rating
4.79
P
PrintablesLite

OpenVessel: The Open-Source Test Print Boat (Not a benchy though)

V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…

Downloads
22,895
Likes
387
Rating
4.89
P
PrintablesRepkord

RepRack: Open Source Spool Holder And Storage System by Repkord

REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…

Downloads
22,834
Likes
7,090
Rating
4.97
P
PrintablesTeachingTech

Open source SpaceMouse - Space Mushroom remix

Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…

Downloads
10,864
Likes
4,875
Rating
4.77

Extra Large Dragon Egg with Threads - (300 percent scaled version)

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . After much trial and error, I…

Downloads
9,699
Likes
1,438
Rating
4.91
P
PrintablesAWT Works

Modular Filament Storage System - V1 (Tested & Reinforced Design)

IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…

Downloads
9,197
Likes
3,085
Rating
4.89
P
PrintablesMiniWorld3D

Sagrada Familia - Barcelona , Spain

🇪🇸 Benvinguts a Barcelona! Welcome to Barcelona! One of MiniWorld3D's most popular models is now on Printables! Our Sagrada Familia model has been printed by makers all around the world for more than 5 years. This model comes in two…

Downloads
8,764
Likes
1,167
Rating
4.96
P
PrintablesConair

Mercedes Logo

Easy to print Mercedes Logo.

Downloads
7,243
Likes
121
Rating
4.94
P
Printablesfixumdude

Tie Fighter Interceptor Kit Card

This model was featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon kit card, I thought I would try to design a tie interceptor to go with the other…

Downloads
7,029
Likes
2,072
Rating
4.87
P
PrintablesMohsin Hussain

Nike Air Force One

Testing out Mole 3D Scanner, Used my Wifes "nearly new" AF1 Shoes in White not sure how you would print it, but if you do. please post it up I have uploaded the stl and ply files if there is anything else you would like me to try…

Downloads
5,713
Likes
193
Rating
4.78
P
Printablesdirtdigger

Calistar - Parametric, open source alternative to Califlower

2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…

Downloads
5,311
Likes
691
Rating
4.91
P
PrintablesRamBros

Dragon R1 - Open Source RC car

Features of this Open Source car: Maximum 3D printed parts Easy to source hardware Simple Assembly Easy maintenance and battery access Dual wishbone suspension Open differential Low noise drive (using Blheli ESC) Printable with a 200mm…

Downloads
4,821
Likes
2,354
Rating
4.78
P
PrintablesM1nt1x

Gyro Keychain (Volkswagen, Mercedes, Seat, Citroen, ..more to come)

This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…

Downloads
4,686
Likes
435
Rating
4.9
P
PrintablesJaneo

Mercedes keychain

Mercedes car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.

Downloads
4,537
Likes
330
Rating
4.94
P
PrintablesTeachingTech

Portable drill press/depth stop attachment for hand drill - Open source

I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…

Downloads
4,445
Likes
3,320
Rating
5
P
PrintablesZach

Triforce Bookmark

A detailed Legend of Zelda bookmark, designed to be super thin and fast printing. No page damage, no hassle, just a cool design :) Test printed using an FDM printer. As I'm going for very thin layers, including the first layer, you'll…

Downloads
3,983
Likes
817
Rating
4.81
P
PrintablesMartin

Enforcer Droid ED-209

This is a posable model of the ED-209 from the movie Robocop. It is a kit and all the joints are posable. Default color of the model is grey. so if there is no color code at the end of the model name, it means it is grey. G - grey B -…

Downloads
3,970
Likes
1,162
Rating
5
P
PrintablesKaminoKGY

Reinforced replacement for broken kitchen hinge

Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰

Downloads
3,897
Likes
2,099
Rating
5
P
PrintablesChip

Belt Tension Gauge (source file included)

Open source tension meter for GT2 belts based on Prusa gcode This design is made based on their gcode file with eyeball measuring. Use at your own risk. STL, STEP , FreeCAD format are availabe for download. The lite version with small…

Downloads
3,585
Likes
288
Rating
4.94
P
PrintablesTeirale

Sorcerer - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Downloads
3,577
Likes
394
Rating
4.93
P
PrintablesDavid Newham

Lego Mercedes F1 42171 Wall Mount

Designed to fit snugly in the center of mass in the model. One screw seems to be enough to hold against the wall I recommend printing it with at least 6 walls, 35% infill, tree supports.

Downloads
3,423
Likes
177
Rating
5
P
PrintablesAndrás Bognár

Lego Duplo Brick Collection with Parametric Source Files

Update 2024.12.05. – I updated the source file for better results. I measured, designed and printed lots of Duplo bricks to bring you the ultimate, well-tested Duplo Brick Creator. I started out from a Fusion 360 design I found out in the…

Downloads
3,383
Likes
283
Rating
4.8
P
PrintablesPeter Farell

Baby Grogu using the force.

Baby Grogu Using the Force. Design by https://skfb.ly/onVoy. Fixed for 3d printing.

Downloads
3,319
Likes
621
Rating
4.57
P
Printables6d6178

Ikea Skadis Detailed Model Full Assembly (Design Resources)

These are detailed models of IKEA SKÅDIS / UPPSPEL pegboards in all standard sizes . They include the pegboard, the mounting bracket, screws, and standoffs. You can use these models in CAD assemblies to create renders, to showcase your…

Downloads
3,212
Likes
251
Rating
4.75
P
PrintablesJamehz

Everdell Complete Collection Resource Containers

This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…

Downloads
3,193
Likes
410
Rating
5
P
PrintablesPower Jojo

Nike Airforce 1 shoes for Dummy 13/Lucky 13

Nike Airforce 1 shoes for Dummy 13

Downloads
3,048
Likes
450
Rating
5
P
Printablesvexanix

Reinforced Articulated Shark

The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…

Downloads
3,038
Likes
415
Rating
4.77
P
PrintablesReferentiel

Star Wars TIE Interceptor

Original part : https://www.thingiverse.com/thing:103582/files

Downloads
3,018
Likes
521
Rating
4.9
P
PrintablesDieZopfe

Open Source Universal Ball Joint (to reuse!)

PROJECT PRESENTATION I share with you the source files allowing you to make a solid ball and socket connection to reuse in your designs. This version is the result of a long series of iterations to find the right design. This ball joint…

Downloads
2,963
Likes
490
Rating
4.86
P
PrintablesJADV

IKEA LACK reinforcement

Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…

Downloads
2,938
Likes
991
Rating
4.97
P
Printablesk014

k014's Parametric 18650 Battery Holder (opensource)

This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…

Downloads
2,938
Likes
472
Rating
4.92
P
PrintablesRichi Sch

COMPLETE TBS Source One V5 CAD MODEL STEP

Hi guys, i just made a CAD File of the TBS Source One V5. Feel free to use it. Tip me a cofee if you want to: paypal.me/richi241

Downloads
2,844
Likes
86
Rating
3
P
PrintablesTeachingTech

Spherical port for filament dryers - Open source and parametised

Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…

Downloads
2,751
Likes
772
Rating
4.75