475 models
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A bidirectional letter opener that fits comfortably in your desk drawer and in your hand like a dice. Use the blade of a utility knife. You don't need to consider the direction of sliding envelope. I recommend to use the blade of a…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
I was at a small barbecue party and we had an uninvited visit from wasps. Unfortunately, a wasp had enjoyed the beer bottle of one of the guests without him noticing. The result when he put on the beer bottle was accordingly not so great.…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Bino plate with recess for Acra mount plate at bottom. Integrated slots for straps to hold binos down. Printed with PLA and 6 walls 25% infill, very rigid. Insure that you print the plate upside down that the recess is on top.
Print approx. €8.35–€10.20 excl. taxPreliminary estimate for one variant
There is space for the printer, anker prime power bank, full 1 kilo spool, screen, a bunch of power cables, and one build plate. I included the step file for the whole model as well as the dxf for the laser cut foam for the bottom.…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove…
Cave Mega Pack - revised and enhanced (OpenForge 2.0 compatible) The Cave Mega Pack ( https://www.thingiverse.com/thing:4605694 ) by John Scott is great! However, it has some issues: Most of the remixes have errors (holes, non-manifold)…
A handle for a Ruger 10/22 magazine, and magazine joiners. The 10-round magazines are fiddly things to manipulate, and recess into the rifle receiver. This handle gives you something to grab onto to extract stuck magazines, and to rapidly…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
This is a heavily revised version of The Ultimate Box Maker, but still true to the original design. Development occurs at https://github.com/jbebel/Ultimate-Box-Maker . Aside from a thorough cleanup of the code for readability, the…
Revised version of the Flashforge Adventurer 5M Orca Slicer project. I am using Orca Slicer version 2.1.1 at this time. Changes: . Reoriented a number of the plates for printability. . 15% Gyroid infill. . Mouse ears added for corners…
Revision of the Original Prusa MINI X End splitting the part in two: a fixed part to lock the X axis and a moving part for the idler, allowing an easier tensioning of the belt, which can even be done on the fly! This part is based on the…
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
A revised and improved T Clip tool
Revised all files in April 2026. This is my interpretation in Gauge 1 (1:32) of the Kds 54 / Ucs 908 Silowagon operated by Deutsche Bundesbahn. http://www.dybas.de/dybas/gw/gw_u_9/g908.html…
This is my one-box storage/organization solution for Agricola (Revised edition) and the Farmers of the Moor expansion. It supports sleeved cards, can be stored vertically or horizontally, and adds no box lift. Trays are designed to be…
This is my take on an already well built design for Agricola Revised Edition by 8BitRobo. I had to make some changes to the design in a way that better suited how I wanted to play. The card trays have all been widened to accommodate…
This is a set of files revised/updated for the Voronoi 3D-printed Stratocaster body as originally published by @lapwing_3d_prints on Thingiverse: https://www.thingiverse.com/thing:5155017 The original files are pretty great, however,…
This revision is based on Juan Puchol's V4 design, where he already fixed the first major issue of the fan door, after I pointed it out to him on FB, which was the unnecessary slop in the hinge that was quickly resolved by reducing the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a revised version of a vertical stand for keeping track of element infusion levels for the board game Gloomhaven. Redditor Sledhead_91 had the great suggestion of obscuring the element when Inert, and partially obscuring it when…
Cameraarm fo my revised X-axis: https://www.prusaprinters.org/de/prints/56241-x-axis-revision-with-belt-tensioner Step file for modifications included To assemble you need: 2x M3x18 screws 2x M3 hex nuts
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Hardware -20mm long M3 bolts https://amzn.to/3HwKVkT https://amzn.to/3SxeR6B -M3 nuts https://amzn.to/42biS3T https://amzn.to/48P1eWb -pen spring (4mm x ~20mm) https://amzn.to/3vQHC5g https://amzn.to/3OiGPAv -Spring wire coil…
COFFEE DISPENSER (REVISED*) (*) Bottom open containers have been included (for easy fill) (09.11.2023: missing files have been included, sorry for the inconvenience) Watch the video: https://youtu.be/BWoMwAzL7AI Just put your coffee pot…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Credit where its due I find the UltiMulti version of MMU3 to be a welcome upgrade on the MMU2/MMU3 basic design by prusa. Its a credit to @David_84304 huge amount of effort to design this, and I am thankful he made it available.…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Design Inspired from the nice ReSpool ~ Prusament edition model designed by Jacob Kincheloe I designed my own one with Fusion 360 to use it with larger spools (up to 75mm width) and with a higher support to have more space around the…
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Can be found here as a free .PDO upload https://www.onekura.com/
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Revised thread for easier and more tolerance friendly printing Variant for this brands: Bambulab spools (66mm width and 55mm hole diameter), compatible with AMS Redline Filament spools (70mm width and 55mm hole diameter) … Drop a comment…
Printed the original model at 50% scale for my daughter's Christmas gnome and quickly realized that there's something wrong with the Malm body model, some drawers wouldn't move at all, get stuck and also they weren't aligned at the same…
This is a stand for your laptop. It comes as tree parts, easily connected in the middle, and very easy to stove away.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is my small fountain used inside the zen garden. I have included all the files needed to scale this model any way you need it. My print was completed using these settings. I would suggest printing infill at 100% for the thin areas.…
FULLY REVISED MODEL (APR2026) Nederlandse Spoorwegen DG conducteurswagen in gauge 1 / 1:32. https://nl.wikipedia.org/wiki/Dg_(spoorwegmaterieel ) The concept for bearings, wheels, buffers, couplings, etc.......... is the same as I applied…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UPDATE: Added slider for 9 / 10 mm timing belt. It uses 5 mm shaft or M5x25 bolt. A revised version of G.design’s Y-axis belt tensioner. Instructions can be found on https://www.printables.com/model/149658-y-axis-belt More stable and…
For no other reason than because I can, I decided to re-design the Voron V0.1/0.2 door handle for the enclosure. Mostly I wanted something that had more surface area for attachment with 3M VHB tape, so I made this one instead. Fits the…
When you want to go down a river that goes on for Niles... and Niles... and Niles... This model is based off of the original blueprints for the ride vehicles that ply the waters of Disneyland. I finally got a chance to test print my…
I remixed asb2106's design from Thingiverse because the letters aren't fully attached to the baseplate when sliced. I re-created it from scratch by using the original design as a sort of template. The only extra items you'll need for this…
Originally remixed from Gulsifer ' s mount, now redesigned from scratch. Simple adapter mainly designed to make direct drive setups as fast as possible. Nozzle position is 8.83mm lower comparing to rookery, keep that in mind. Changelog:…
9-5-26 Update: v11 non PTFE model -added 0.5mm to side facing hotend to close gap -added significant material to attempt increased strength of filament path section -assembly may now require inserting idler bearing first, and main drive…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I love the idea of Carlos Guerrera's plate holder mod of the original A1 and B1 sections of the AD5X enclosure files. When installing the revised sections with the enclosure panels, the plate holders prevent the side plexiglass from…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hi everyone, i created Insert for Talisman and 4 big expansions and 4 Small expansions - because i could not find one that i would like. Basically you will need only 1x main box and 2 expansion boxes. The third one is optional. It is…
Set of 4 coasters with Emoji Theme 95mm x 5.6mm approx Added STL Files
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Introduction (for revision see bottom of document) The (Bug-Insect) Hotel. You can use all of the Prusament filament Spool and all of the cardboard box it came in, along with a load more upcycled products. Parts required The bug hotel…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I struggled to insert the end pieces on v2.0. I remixed it to increase the tolerance on my printer. I run a 0.6mm nozzle but did print at 0.2mm as directed. I've simply opened up the tolerances for the two tongue parts. Please get the end…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Summary This is the leg compatible with the Bosch Dishwasher. Model reuploaded from thingiverse. Have a nice maker days. Print Settings Printer brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0,20 mm Infill: %30…
This model is a REMIX of pejvl2000's model which is itself a remix of3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260 Uses 2x 625ZZ Bearings 16 X 5 X 5 (Outside / Inside / Thickness) Press fit hole is exactly…
I like the fidget spinner from Aauron Park, but the sides didn't quite work for me, because the were rubbing against the bearing causing friction, so I set out to redesign the Parts in Fusion360 as a challenge (my first design). basically…
After modifying the S4 with the stock files from Sunlu, i found that the cardboard rolls were biting into the holder. I decided to design up a holder for multiple polymaker spools. This is a drop in replacement from the original Sunlu 3kg…
2024-04-14: revised by adding more variations: longer tray and more pegs on back bar. Caddy set comprising a tray, a box, many grid sizes and several beam variations. Mix and match to your needs. Filenames show (in order): length, width,…
I was in need of a thin child safety lock that would not interfere with the opening in then top of a drawer. This design is slim enough to fit above most side mounted drawer slides. Each latch consists of 3 parts. A striker to mount to…
This is an updated version of my previous version card holder. After prolonged use, the cards were starting to show wear, so we bought the card sleeves https://www.amazon.ca/dp/B07NZMR346?ref=ppx_yo2ov_dt_b_product_details&th=1 for them.…
Revised CV Laser Module holder using Creality Ender-3 S1 Simple Tool Changer by Jón Schone - https://properprinting.pro I found this great interchangeable tool system and was happy to see there was a laser attachment for it here . Remix…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Schuko childproof dust cover A childproof version of the Schuko dust cover. This cover can be completely retracted into the socket and can only be removed with a tool. Version 1: Dust Cover with a hole, so you need an “Key” to remove it…
OVERVIEW Baseplate and Festool hose attachment for Milwaukee M18 router. The base plate allows dust collection from below which almost entirely eliminates dust when used for straight cuts. Based on the design of @mgrobins . Original model…
Re-design of the inner box to have the additional chamfer and marking on the narrow side so that the lid can close without catching on it. Everything set up ready to print in the 3mf (import as project), just change the printer and the…
Note: This was remixed from a model on Thingiverse and is now imported here. Update: I printed this and all the tips I have (including the longest tip I have, TS-ILS) fit. Also, check out the comments to find where to get the adapter! I…
The original design proved to be difficult to assemble. Initially, I decided to have a multi part body design with smooth interior walls. This has been changed now, and the body shell consists of a much stiffer single piece (with a…
I recently got the revised edition of citadles (2021) and had trouble finding an insert so decided to make my own. I'm definitely a beginner in terms of designing and modeling so any tips or suggestions on how I can improve this would be…
This is a remix of Ivan Urbánek's fantastic Continuous Shelves bracket, the peg is slightly reduced in thickness
Updated the washer for connecting the handle to the magazine to make it as low profile as possible.
I really liked the Modular Gridfinity Drawers ( https://www.printables.com/model/402298-modular-gridfinity-drawers ) by Travis Houston https://www.printables.com/@TravisHouston_483368 but I wasn't happy with how much bridging it took to…
I liked the watering bottle cap from @3dprintnovesia (https://www.printables.com/de/model/151956-watering-bottle-cap), but unfortunately it leaked out of the thread, so i fxed it. I just added a chamfered ring to seal the top of the…
This is made to assist in loading 9mm ammo into Glock style magazines. I bought a PCC, it was set up for Glock mags. I bought the mags and realized I didn't have a loader. I printed another design, but didn't like it, so I copied the…
NOTE: Original model is excellent unless you run into trouble to get the srat located in these smallest indents, so I re-designed the star, having one piece with 0.15mm olive ring unterneath, then just glue it on. As a remix is not…
Design My Spool (Re) Winder - Prusament Revised Edition → https://www.printables.com/model/244914-spool-re-winder-prusament-revised-edition was originally designed to be used with Prusament spool using a special interface As I wanted to…
Updated version of my Ankylosaurus
Slightly better than the original version I made a while back, can be used right after being taken off the bed. Basic model has 100mm legs while the longer version has 150mm legs. Might make a stronger version that can use pipe or dowel…
4/12/2024: REVISE #2 My initial design did not hold up for very long and a couple bumps with my hands when changing filament finally took it out for good. I decided I needed something beefier but wanted to stick with PLA as I already had…
In this remix I added rounded corners for a more polished look and a larger opening so the box fits in better. Happy Printing!
Revision of one of my most popular models.
Changed based on the feeback on Kapiosk version - for large spools. To avoid the spool rim colliding with the extruder release handle, added a 2cm deep collar to the base of the spindle. This makes the spool rim further away from the…
EN: Revised version of the rear roller for the Hydra Pro AMS. The rollers in the back with guides didn't really make sense to me. In my case, they don't properly center the filament spool, nor do they prevent the spool from rubbing…
This design with a much shorter stem works better for me visually. The g-code and the 3mf include the color change. Infill at 100% recommended.
A pep file I found sometime back on a free to download pepakura website, so not even sure if it is Madalorian, but I suspect it is? Thanks to Keith Brown for the information that the original model was done by Jackrit Cheers Jace
The latest version of the Wombat doesn't fit the original case. There's an electrolytic capacitor that stands too tall, and the reset/power button has been moved. This fixes it. This also closes up the area over the jumpers, as I don't…
This is a remix of the "Revised Apple iPhone Magsafe and Apple Watch Charging Stand" by Bar1ow: https://www.prusaprinters.org/prints/46548-revised-apple-iphone-magsafe-and-apple-watch-charg The remix allows for the (usually cheaper) AT&T…
Iconic Movie Moments - The Wizard of Oz - On the Yellow Brick Road - 1939 3D printable model.
No supports needed; stock settings should be fine.
EDIT 07 Feb 2024: the space for the GPS Module is tight; a user reported that the BE-180 fits, while the BE-182 doesn't. So ****USE A BE-180 GPS MODULE *** with this box. ______________________________ This box is derived from my previous…
Token holders - capsules - for the resources from the Arkham Horror LCG Revised Edition. Printer Settings: Material : PLA Resolution : 0.1 mm
![[revised] BottleCaps v2 - Insect cover for bottles](https://media.printables.com/media/prints/215863/images/1971380_6c21485d-bdac-4b84-8426-25d9f5b8de3b/bottlecaps.png)
![Modular kitchen sink caddy [REVISED] (cadquery parametric)](https://media.printables.com/media/prints/809614/images/6496983_c95ab88b-d165-4f1c-b4ff-a9efddf7378d_6a9b2280-ebe6-4a1d-8999-fc1b6f88d0ea/kitchensinkcaddy10.jpg)
![[revised] Schuko childproof dust cover](https://media.printables.com/media/prints/213045/images/1951793_70ec6ffd-4c95-4571-aec5-58b493c370ae/schuko-childproof-dust-cover-v2.png)
