Search results: rich

Sort order

Counting matching models…

P
Printablesmatej

upholstery clip 8mm / prichytka calouneni 8mm

Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…

Downloads
3,329
Likes
1,339
Rating
4.4
P
PrintablesKlaus

Cutlery Tray for old Ikea 60cm drawers / Besteckeinrichtung für Ikea Besteck-Schublade

This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…

Downloads
320
Likes
42
Rating
2
P
Printablestille

fest sitzender Wassertrichter für Wohnmobil und Caravan - Version 2

Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…

Downloads
293
Likes
25
Rating
5
P
PrintablesJSC

Fuchs Gewürze Trichter / Spices Funnel

Entdecken Sie die smarte Art des Nachfüllens mit dem Gewürzdosen-Trichter. Für eine saubere, schnelle und stressfreie Küche! Der Einfülltrichter sitzt passgenau auf der Gewürzdose, ohne zu verrutschen. So bleibt alles dort, wo es…

Downloads
214
Likes
28
Rating
5
P
PrintablesFlo12

Spice funnel (Trichter für Gewürzgläser)

Funnel exactly matched to common spice jars.

Downloads
137
Likes
19
Rating
0
P
PrintablesPolyForge

Ostrich – Large Bird Figurine

This ostrich sculpture captures the tall and elegant stance of the world’s largest bird. Ideal for collectors, nature-themed displays, and classrooms studying exotic wildlife. Printing : Suitable for FDM and resin printers Supports :…

Downloads
121
Likes
14
Rating
0
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter

Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…

Downloads
108
Likes
25
Rating
5
P
PrintablesMichael S

Schleifvorrichtung

Die Schleifvorrichtung ist hier in zwei Varianten ausgeführt: V1 - ist in X/Y-Richtung zum Schleifbock fix montiert und kann nur quer und radial zur Schleifscheibe geschwenkt werden. Zum Bohrer schleifen wird das Prisma V1 (ohne…

Downloads
102
Likes
9
Rating
0
P
Printablestom

Schraubbarer Trichter - screwable funnel for ÖRTFYLLD

Ein Einfülltrichter für Ikea Gewürzgläser ÖRTFYLLD. Der Trichter kann zur einfachen Anwendung auf die Gläser geschraubt werden. Die obere Einfüllöffnung hat ca. 70mm Durchmesser. Der Druck benötigt keinen Support. Google translater: A…

Downloads
74
Likes
1
Rating
5
P
PrintablesMartin Kurka

Electrolux Trichter zum Salz Nachfüllen

English: This model features a 0.74mm wall thickness version, equivalent to two layers without gap fill, available in two variants: shorter and taller. Specifically designed for refilling salt in the Electrolux dishwasher model:…

Downloads
59
Likes
4
Rating
0
P
PrintablesKlaus

Funnel and sieve / Trichter und Sieb für Speidel 12l Getränkefass

Scale funnel to 5% before slicing. No support needed.

Downloads
54
Likes
8
Rating
0
P
PrintablesKarsten

Feuerrohr-Trichter für Pellets - Fire tube hopper for pellets

Das Rohr hat einen Innendurchmesser von 55 x 55 mm. Der Trichter wurde unten mit 52 x 52 mm gedruckt (Aussenmaß), damit passt er auf jeden Fall. Die obere Einfüllung hat einen Durchmesser von 150 mm. Gedruckt in PLA. The tube has an inner…

Downloads
49
Likes
4
Rating
5
P
PrintablesFlo

Clamp for Proxxon handheld tools / Spannvorrichtung für Proxxongeräte

With this clamp, Proxxon and all other tools with a maximum diameter of 35 mm and a clamping diameter of 20 mm can be clamped in vices and with an additional clamp on the table. An M5x30 bolt and an M5 nut are also required. Link for an…

Downloads
44
Likes
6
Rating
0
P
Printablesblechbude

Trichter abgewinkelt Bernardo P600G Getriebeöl; Angled funnel Bernardo P600G gear oil

Abgewinkelter Trichter für das Vorschubgetriebe der Bernardo P600G. Ein O-Ring mit Innendurchmesser 17 mm und Schnurstärke 2,5 mm ist nicht unbedingt notwendig, hält den Trichter aber besser im Einfülloch bzw dichtet dieses ab. Ich habe…

Downloads
43
Likes
4
Rating
0
P
PrintablesTELDON Computer

extension for table feet diameter 5cm - prolunghe cilindriche per piedi del tavolo

Prolunghe cilindriche per piedi tavolo, con foro centrale per vite

Downloads
28
Likes
0
Rating
0
P
PrintablesRPK

Achsen-Haltestifte / Rods for "Spulvorrichtung für Filamentrollen"

EN: In the very simple and usable model of a filament spooler from 3D-Kalle, there are holes for attaching a pin to secure the shafts, but no pins are designed. Of course you could use a nail or pin, but metal is more slippery and…

Downloads
22
Likes
3
Rating
0
P
PrintablesStrankler

Permanent-On Switch for Insekten Schröter / Executioner / Röhrich

Description: Sometimes the chase for a mosquito or a fly takes longer as expected. Constantly keeping the finger on the button is exhausting, so there had a solution to be found. This gadget allows you to keep your Insekten Schröter or…

Downloads
18
Likes
5
Rating
5
P
PrintablesEG3Dprinting

Electric Guitar Body - B.C. Rich Warlock

Here's a B.C. Rich Warlock style guitar body I made. This is a fully functioning guitar body, just add a neck and electronics! I started making this in July 2022 right around the time Stranger Things 4 ended since I wanted the guitar from…

Downloads
5,460
Likes
946
Rating
4.89
P
PrintablesT B A

Funnel for resin bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others // Trichter für Resin-Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und andere

(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…

Downloads
3,758
Likes
335
Rating
4.88
P
PrintablesAki Racing

Beer Pong Funnel // Bier Pong Trichter

The funnel for your beer pong game. I have seen many of these funnels for sale (files or already printed) and thought to myself, I can construct this myself and publish it for you for free. It is designed for almost all cup sizes and can…

Downloads
2,044
Likes
134
Rating
4.5
P
PrintablesMiniWorld3D

King Triton's Palace, The Little Mermaid - Aquarium / Fish Tank Enrichment

🌊 🐠 Welcome Under the Sea! 🧜 🔱 You have the honor of visiting King Triton's Palace Under the Sea!! A majestic building of towering spires and impossible arches awaits your gilled friends. Dive in to learn about the features of this…

Downloads
1,493
Likes
407
Rating
5
P
PrintablesDJ

oil liquid fluid funnel with screw (thread) for cans - Trichter mit Verschraubung für Flaschen, Kanister Öl Flüssigkeiten

I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…

Downloads
1,443
Likes
322
Rating
5
P
PrintablesAA

Funnel - Trichter

Funnel (double-walled for faster filling) Scale it as you like. When handling food, always ensure appropriate hygiene and cleanliness of the funnel. Have Fun! Trichter (doppelwandig für schnelleres Füllen) Skalieren nach Belieben Beim…

Downloads
1,277
Likes
66
Rating
5
P
PrintablesMarkus Schmidt

Kleiner Trichter / Small funnel

Kleiner Trichter.. Ich benutze den Trichter, um Isopropanol für die Druckbett Reinigung in eine leere Glasflasche (in der mal Rasierwasser war) zu füllen. Das ist sehr praktisch und gut zu dosieren.. Zum Drucken den Trichter mit der…

Downloads
1,021
Likes
26
Rating
4.83
P
PrintablesEndersen

Trichter - Gravitrax Kompatibel

Remixed from Thingiverse User thomasdr if you like my model please leave a like there

Downloads
1,002
Likes
121
Rating
4.86
P
PrintablesTN 3D-Objekte

Funnel / Trichter

To use the PET-bottle after trinking as a food container. You can easily fill rice, corn or other thinks in it. Children love to fill sand in the bottle. Have fun.

Downloads
941
Likes
71
Rating
4.94
P
PrintablesLars Kramberger

Richard the rat

A rat that likes cheese.

Downloads
922
Likes
99
Rating
5
P
PrintablesMK_Design

Hyperbolischer Trichter

-German- Dieser hyperbolische Trichter ist eine Erweiterung für eine Murmelbahn. Der Trichter ist den "Spendentrichter", die man oft in Zoo's oder sonstigen öffentlichen Einrichtungen sieht, nachempfunden. Die Kugeln laufen im äußeren…

Downloads
920
Likes
143
Rating
5
P
PrintablesGri

Trichter - Funnel

Simple and fast printing funnel. No support required - Scale it do the size of your needs

Downloads
911
Likes
28
Rating
4.86
P
PrintablesMZ4250

Van Richten's Guide to Ravenloft collection ( so far )

My takes on the NPCs and Creatures from Van Richten's Guide to Ravenloft are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…

Downloads
738
Likes
119
Rating
5
P
PrintablesFiewo

Oil funnel VAG vehicles / Öl Trichter VAG Fahrzeuge

Filament PLA Print in 0.3 100% infill need supports

Downloads
639
Likes
45
Rating
0
P
PrintablesTheBien

Diamond Painting Trichter Funnel für runde Dosen

Diamond Painting Trichter zum umfüllen für Steine in die runden Dosen

Downloads
637
Likes
75
Rating
5
P
PrintablesGri

Trichter mit Entlüftung - Funnel with ventilation

Funnel with vent tube so that air can escape from the vessel to be filled when the funnel is fully seated.

Downloads
627
Likes
38
Rating
5
P
Printableswie_das_geht

Planfräsvorrichtung für Makita RT0700C und Makita DRT50Z

Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…

Downloads
588
Likes
182
Rating
0
P
PrintablesFrankWL

Biegevorrichtung für Widerstände (Bending device for resistors )

Biegevorrichtung für Widerstände, Dioden, etc. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Filament: Anycubic PLA green Category: 3D Printing

Downloads
574
Likes
40
Rating
4.6
P
Printableskenny93

Filamenttrichter / Filament Guide für Prusa Mini

Keine Stützen nötig, Infill fällt nicht ins Gewicht, Den Trichter einfach auf das Ende des PTFE-Schlauches stecken.

Downloads
573
Likes
130
Rating
4.94
P
PrintablesLeapin_Cat

B.C Rich Warlock Guitar Body Remix for Tune o Matic Bridge

All of the changes are made are only to the middle two pieces, so those are the only models I included here. If you would like to print this guitar, grab my two files and then get the rest from the original model. I am very much a…

Downloads
571
Likes
85
Rating
0
P
Printablesblechbude

Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4

Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…

Downloads
546
Likes
122
Rating
5
P
PrintablesSuper-KAP

Mini Trichter mit Entlüftung / Mini funnel with vent

Mini Trichter mit Entlüftung zum auffüllen Flaschen oder ähnliches. Durch Entlüftung wird Blasenbildung verhindert und somit kein blubern und spritzen. Update - 23.02.2023 Jetzt braucht man keinen Support mehr. --------------- ENGLISH…

Downloads
538
Likes
18
Rating
4.67
P
PrintablesPablo_3D12

sculpture elephant a la Richard Orlinski

magnifique sculpture éléphant a la Richard Orlinski

Downloads
517
Likes
84
Rating
4.86
P
PrintablesTheSheDM

Treat Tower - Enrichment Puzzle!

This toy is designed to challenge your cats problem solving skills, patience, and paw dexterity. The simple design resists tipping over due to it's wide base but it still fits most build plates and prints support-free! Drop 2-3 of your…

Downloads
488
Likes
129
Rating
5
P
PrintablesNanodesigner

Set 'ELEGANCE' per Bambu e Stampanti Generiche - for Bambu and Generic Printers

Salve a tutti! Molti aspettavano la fine di questo progetto. Vi presento "ELEGANCE" il kit da tavolo universale per accessori Bambu e stampanti generiche. Ho ritardato per delle modifiche dell'ultimo momento (chi prototipa sa che non…

Downloads
486
Likes
161
Rating
0
P
PrintablesMAKERTEAM®

Hot Wheels Matchbox Launch Pad (Abschussvorrichtung)

Launch pad for Hot Wheels tracks. As you can see on the pictures it is pretty easy to mount. You only need an additional rubber band. We recommend to print GRIP & BOX in PETG and the BOLT in PLA. The grip can be screwed with 2x 10x4mm…

Downloads
472
Likes
129
Rating
4
P
PrintablesFlorian

Trichter

Universal Trichter

Downloads
465
Likes
24
Rating
5
P
Printablestopahl

Rolladen Einlauftrichter (299020 & 299010)

Nach gut 20 Jahren sind mehrere der Einlauftrichter meiner Rolladen gebrochen, da das Plastik langsam porös wurde. Da ich den Hersteller und das Modell nicht mehr herrausfinden kann, habe ich das Teil kurzerhand selbst Modelliert. Das…

Downloads
427
Likes
14
Rating
5
P
Printableswfvn

HR Richter / Brodit mount basic plate

HR Richter / Brodit mount basic plate, meant for creating your own phone holder Category: Mobile Phone

Downloads
400
Likes
14
Rating
0
P
PrintablesDrSchiduwi
Downloads
395
Likes
35
Rating
5
P
PrintablesCaleb_3D

Trichter für Kaffeefilter, Filter Isopropanol oder Likör, ISO, Resin, funnel, Dual Trichter

Hallo ich habe hier einen Trichter im Trichter quasi so das wenn man nen Kaffeefilter rein macht das ISO z.B. dann nicht nur unten sondern auch seitlich gefiltert werden kann. gedruckt habe ich diesen mit PLA, wie PLA auf dauer auf…

Downloads
385
Likes
29
Rating
5
P
PrintablesMachspace

Modular cat enrichment puzzle feeder

A modular enrichment tray for feeding cat treats. Four different puzzle sections, plus a blank model to design your own. Each section prints in place with no support material needed. Works up quickest using rectilinear infill and a large…

Downloads
375
Likes
87
Rating
5
P
PrintablesJohination

OPEL Wischwasser Trichter / OPEL wiperwasher fluid funnel

Printable without support! my print settings: Rafts - Brim: YES Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 100% Material: PLA Brand: Extrudr Color: Black

Downloads
369
Likes
69
Rating
3
P
Printablesbredlmax

Trichter Streudose Salz

Ohne Stützmaterial druckbar. Nicht geeignet für die Dosen mit der halbrunden sichelförmigen Öffnung. Facebook: 3D Druck für praktische und nützliche Dinge

Downloads
367
Likes
46
Rating
5
P
PrintablesRealPrint

Interior (Inneneinrichtung) for Märklin 4022 (D-Zug-Wagen, 2. Klasse)

Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. Falls die…

Downloads
352
Likes
17
Rating
0
P
PrintablesMinitobi26

Trichter(Funnel)

A funnel with a diameter of about 60mm and 120mm

Downloads
336
Likes
12
Rating
5
P
PrintablesMichael Schmitz

Wiper fluid funnel Smart 451 - Wischwassertrichter Smart 451

I was pretty upset the way Smart designed the intake for wiper fluid, made a funnel for it. Ich war ziemlich ‘bedient’ wie Smart den Wischwasserbehälter designte, hier mein Trichter dafür.

Downloads
335
Likes
49
Rating
5
P
PrintablesPascal

Trichter / Funnel für Wolkenkraft Vaporizer Kapseln

Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…

Downloads
322
Likes
26
Rating
5
P
Printablesjohnbbb

Richard Wagner Bust

Sculpted in Blender. I tried to make it require as few supports as possible. I used tree supports and printed at 0.12 layer height positioned straight up. It is originally a bronze statue i Baltimore:…

Downloads
321
Likes
30
Rating
4
P
PrintablesBerserker

Spülmaschinen Salz Trichter; dishwasher salt funnel

PLA Perimeter: 2 Resolution: 0.3 Supports: no

Downloads
316
Likes
19
Rating
5
P
Printablesnetwalk

Kleine Krippe, in Anlehnung an Ulrich Bernardi Krippenhaus (ANRI), altes Modell

Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…

Downloads
316
Likes
36
Rating
5
P
PrintablesMax Im

BMW f20 Scheibenwasser Trichter mit O-Ring Einfassung

Trichter zum befüllen von Scheibenwischwasser für z.b. BMW F20 Der Trichter wurde so geändert, das man einen O-Ring einsetzen kann um einen stabilen sitz zu bekommen und gleichzeitig eine abdichtung zu erzeugen.

Downloads
309
Likes
49
Rating
4
P
PrintablesPascal

Wolkenkraft Äris Trichter / Funnel

Zum einfachen befüllen eines Wolkenkraft Äris Vaporizers. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. For easy filling an Wolkenkraft Äris Vaporizer. If necessary, sand the inside of the funnel with fine sandpaper.…

Downloads
299
Likes
31
Rating
5
P
PrintablesSTxS

Trichter / Funnel

Material: 34 g ASA (wegen Geschirrspüler, regarding dishwasher) / PLA+? Druckereinstellung: Layerhöhe 0,2 / Wände 5 / Schichten 5 oben, 7 unten / No Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be…

Downloads
293
Likes
76
Rating
5
P
PrintablesSavageRodent

(Pet Enrichment Toy) Turntable Starfish

Pet Enrichment Toy Simply put a treat or morsel under each of the sliders then give the toy to your pet and leave it to them to work out how to retrieve the treats. The design is based on something I saw for a small dog, although I've…

Downloads
287
Likes
80
Rating
5
P
Printablesblechbude

Yamaha XS 650 Einfülltrichter Trichter funnel Öl Motoröl oil filling funnel engine oil

Trichter um an der Yamaha XS 650 das Motoröl einzufüllen. Version v1 ohne Nase; Version v2 mit Nase um an den originalen Mikuni Vergasern zentriert werden zu können. Gedruckt mit vier Perimeter ohne Stützmaterial. Probedrucke wurden mit…

Downloads
281
Likes
30
Rating
5
P
PrintablesSpeedy

Beer pong funnel / Bier Pong Trichter

Introducing a beer pong funnel designed to fill 10 cups simultaneously and evenly, ensuring a mess-free and consistent experience every time. Say goodbye to spills and uneven pour levels! Currently in development; your feedback is welcomed!

Downloads
275
Likes
15
Rating
0
P
Printablesyammit85

Lüfteradapter für Hoymiles HMS Mikrowechselrichter

Die Homilies Wechselrichter können bei viel Sonne (viel PV Leistung) sehr warm werden. Der Wechselrichter sollte zwar automatisch abschalten, aber man tut der Elektronik etwas gutes, wenn man den Wechselrichter kühlt. Ich habe mir einen…

Downloads
270
Likes
9
Rating
0
P
Printablespeteruhlmann

Zusatzkühlung für DEYE Wechselrichter 8, 10, 12 KW oben 45 Grad mit 3 Stück 120mm Lüfter

Dies ist eine Zusatzkühlung für Deye Wechselrichter, welche oben auf den WR gesetzt wird. Die Schrauben M4X35mm werden von vorn durch die Löcher, durch die Lüfter gesteckt. Von der Rückseite werden die Schraubecken mit der Schrauben…

Downloads
270
Likes
10
Rating
0
P
PrintablesJace1969

Reinhardt Balderich Helmet

Over watch helmet to the previous Reinhardt. Print instructions Category: 3D Printing

Downloads
265
Likes
61
Rating
0
P
Printablesjano

Trichter

man braucht Trichter hat aber nur ein 3d Drucker? druck doch ein Trichter

Downloads
262
Likes
7
Rating
0
P
PrintablesMalinaPl

Bc Rich Warlock mini Guitar model

Hi ! Today guitar straight from hell. Model is 30 cm long. There are two versions of body - with raised flame pattern (for easier painting) - like on photo - v3 Second version is flat , without any pattern -v6 Best resoults with 0.1…

Downloads
261
Likes
33
Rating
5
P
PrintablesSavageRodent

(Pet Enrichment Toy) Sliding Tiles Puzzle

This enrichment toy is based on those old, handheld, picture puzzles with sliding tiles. There is no picture to arrange but there are small compartments to hold food under each of the tiles. This is a pretty easy puzzle and my rats…

Downloads
257
Likes
93
Rating
5
P
Printablesper-form-3d

PRUSA SL1S SPEED Abtropftrichter

Trichter zum Ablegen des Tanks direkt auf der Resin Flasche. Passt bei allen gängigen Flaschen. Auch das originale Sieb passt hinein.

Downloads
253
Likes
36
Rating
5
P
PrintablesPat_S

Silica gel container with funnel / Silica-Gel-Behälter mit Trichter 64 mm x 25 mm

The silica containers I've found so far have always been too big for me, so I had to make something of my own. And tada... another silica gel container, but this time more handy and with a funnel for easy filling. Dimensions of the…

Downloads
251
Likes
30
Rating
5
P
PrintablesFlexible3DPrint

Trichter

Ein ganz einfacher normaler Trichter mit Griff.

Downloads
245
Likes
9
Rating
0
P
PrintablesSidious 01

Drehvorrichtung für Atomstack s10 pro

Vorrichtung oben und unten aus PLA gedruckt Adapter M12-M6 + Achse/Axis aus 1.4301 Kugellager/Ball-Bearing : https://www.ebay.de/itm/222526238773 Schrittmotor / StepperMotor: https://www.ebay.de/itm/392557822271 Antrieb / Drive:…

Downloads
242
Likes
39
Rating
5
P
PrintablesFranktion

VW Bus T3 Öl-Trichter T25 OIL FUNNEL

Trichter passend zu Öleinfüllrohr am T3. Funnel for oil filler pipe.

Downloads
238
Likes
25
Rating
0
P
PrintablesRadswid

PEI Sheet Alignment Tool / PEI-Druckplattenausrichter

This should help to align the PEI sheet with the printbed.

Downloads
236
Likes
23
Rating
4.67
P
PrintablesPascal

Wolkenkraft FX Mini Trichter / Funnel

Zum einfachen befüllen eines Wolkenkraft FX Mini Vaporizers. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. For easy filling an Wolkenkraft FX Mini Vaporizer. If necessary, sand the inside of the funnel with fine…

Downloads
231
Likes
19
Rating
5
P
PrintablesErwian

Wassertrichter für Fiamma Anschluss

Ich habe immer das Problem gehabt, das beim Wasserauffüllen mit einer Kanne der Trichter weggerollt ist. daher habe ich einen passenden Trichter für meinen Fiamma Wasseranschluss kreiert. Vielleicht können andere so etwas auch gebrauchen.

Downloads
226
Likes
21
Rating
0
P
PrintablesBiff Brensing

Bohrer-Schleifvorrichtung / drill bit sharpening jig für Proxxon TG 125/E Tellerschleifer

Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…

Downloads
224
Likes
21
Rating
5
P
PrintablesPeter_Sörgel

Hängevorrichtung für USB-Kabel

Jeder hält wohl diverse USB-Kabel in den unterschiedlichen Ausführungen irgendwo bereit. Mit dieser Hängevorrichtung kann man sie schön platzsparend und übersichtlich lagern. Ich habe Varianten für unterschiedlich starke Träger zum…

Downloads
221
Likes
25
Rating
4.33
P
PrintablesAK

Trichter mit Gewinde für Sodastream Flaschen / Funnel with thread for soda stream bottles

Dieser Trichter mit Gewinde passt auf Sodastream-Flaschen. Wir nutzen eine alte Flasche als Behälter für das Geschirrspülmittel und verwenden den Trichter zum Nachfüllen der Flasche. This funnel with thread fits sodastream bottles. We use…

Downloads
221
Likes
35
Rating
5
P
PrintablesYanneck

Delonghi Dedica EC685 Pulvertrichter (51,5mm)

Trichter zum einfüllen von Kaffeepulver in den Siebträger, geeignet für alle Siebträger mit 51,5mm Innenmaß. Durch Skalierung kann der Trichter natürlich auch für andere Durchmesser angepasst werden. Lasst doch gerne einen Kommentar oder…

Downloads
221
Likes
18
Rating
5
P
PrintablesSchranzer

Bohrerschleifvorrichtung

Diese Bohrerschleifvorrichtung V1.0 ist zum schleifen von Bohrern gedacht. Passend für den Bosch GBG 60-20 und GBG 35-15. Am besten in PETG oder ABS drucken, das falls er mal runterfällt nicht direkt entsorgt werden muss. Breite: ca. 70mm…

Downloads
218
Likes
6
Rating
0

Rolladen Einlauftrichter

Rollos (Rolladen) mit Lamellen benötgen manchmal eine Führung, in meinem Fall zerbröselten die 20 Jahre alten Kunststoffteile, das Rollo lief dann nicht mehr richtig. Den Hersteller gibt es nicht mehr. Also zeichnete ich es neu. Meine…

Downloads
216
Likes
11
Rating
0
P
PrintablesRealPrint

Interior (Inneneinrichtung) for Märklin 4027 (D-Zug-Wagen, 1. Klasse) (auch 4023?)

Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…

Downloads
212
Likes
13
Rating
0
P
PrintablesSB

2x Universal-Trichter mit Sieb und Aufsätzen - UpDateV4 + Trichter 80mm!

2x Universal-Trichter mit 115mm / 80mm Durchmesser und folgenden schraubbaren Ansätzen : 10/15/20mm Auslass in den Größen 100mm / 50mm 5l Kanister Sodaflasche 14,5mm Für den 115mm Trichter stehen 3 verschiedene Siebeinsätze zur Verfügung:…

Downloads
200
Likes
37
Rating
5
P
Printablesangel618

Worx Regen-Trichter für Garage 60mm

Trichter für die Worx Original Garage um den Landroid schon bevor er im Nassen durch den Garten fährt in die Regenverzögerung zu bringen. Durch den Trichter läuft das Wasser gleich auf den Regensensor und der Mähroboter bleibt in der…

Downloads
200
Likes
7
Rating
5
P
Printablesmatej

upholstery clip 4mm / prichytka calouneni 4mm

prichytka calouneni dveri auta. ve sliceru je třeba nastavit “detekce tenkých stěn” aby se správně vytvořila první vrstva včetně křidýlek. Pokud potřebujete úchytku upravit, zde je zdroj https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl

Downloads
199
Likes
76
Rating
5
P
PrintablesSchraubaer

Trichter groß

Gedruckt wurde der Trichter auf einem Prusa MK4 mit 0.4er Düse, PETG Gedruckt wurde mit der großen Öffnung nach unten, kein stützen notwendig. Die Größe kann im Slicer skaliert werden.

Downloads
194
Likes
20
Rating
5
P
Printablesbredlmax

Trichter mit Entlüftung

Das Einfüllrohr hat außen einen Durchmesser von 28mm. Der Trichter ist bestens für 20l Kanister geeignet und muß beim Einfüllen nicht gehalten werden. Das Entlüftungsröhrchchen ist in den Trichter integriert. Ich fülle damit schnell…

Downloads
190
Likes
6
Rating
0
P
Printablesblechbude

Trichter für Kanister zum aufschrauben; M44 x 4; Funnel for canisters, screw-on type

Trichter für 5 oder 10 Liter Kanister zum aufschrauben. Gewinde M44 x 4. Die mir zur Verfügung stehenden Kanister hatten ein Gewinde mit ca 43,5 bis 43,8 mm Aussendurchmesser. Die 4 mm Steigung war bei allen gleich. Empfehle das Gewinde…

Downloads
189
Likes
64
Rating
0
P
PrintablesMcClean

Stabiler Trichter / stable Funnel

Ein Set stabiler Trichter in verschiedenen Grössen / A stable funnel set with different sizes

Downloads
185
Likes
7
Rating
5
P
PrintablesThor

(Schüttgut) Trichter

Ich fülle mir für die Arbeit immer Instantkaffee in ein kleineres Glas ab und habe mich immer über den zu kleinen Durchlass geärgert. Gut für alles trockene Schüttgut. PLA ; 0,4mm Düse ; 0,2mm SH ; 15% infill ;

Downloads
185
Likes
9
Rating
0
P
PrintablesYOKOZO

Friedrich Nietzsche

A striking tribute to one of philosophy’s most intense and influential minds. This stylized bust features Nietzsche’s iconic mustache, piercing gaze, and 19th-century suit—perfect for thinkers, collectors, and lovers of deep, radical ideas.

Downloads
184
Likes
24
Rating
0
P
Printablesmetalsepp

BMW Scheibenwasserbehälter Trichter

erstellt für meine BMW 320d Xdrive von 02/2016. Wie weit dieser Trichter an anderen BMW Modellen passt, ist mir nicht bekannt. Der Ausschnitt an der Seite dient dazu dass die eingefüllte Flüssigkeit in das seitlich abgehende Rohr im…

Downloads
183
Likes
25
Rating
0
P
PrintablesJP

Trichter für PET-Flasche

Dieser Trichter kann auf eine handelsübliche PET-Flasche aufgeschraubt werden.

Downloads
179
Likes
5
Rating
5
P
PrintablesJan Suchý

HR Richter držák - Škoda Citigo, Seat Mii, VW UP!

Upraveno pro použití navigace https://www.aliexpress.com/item/1005004865198233.html?spm=a2g0o.order_detail.order_detail_item.4.10be636893FN9d&fbclid=IwAR1T28ESixCD5mmZuOtxk7f5PXLtn2wc0LULY0BBeizbumiF6x48bzStoPk&gatewayAdapt=glo2deu na…

Downloads
176
Likes
12
Rating
5
P
PrintablesModel Magic

Pretty Woman - Julia & Richard - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
166
Likes
19
Rating
0