Search results: right

Sort order

2,356 models

P
Printablesprntmkr

Compact 90° Right-Angle Bit Holder – Ultra-small for tight spaces

Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…

Downloads
2,891
Likes
859
Rating
5
P
PrintablesMeister Edel

Stable Hinge !upright printable!

Some time ago I was looking for a nice hinge to finish the encasing of my printer. Thanks to J-Max I found a nice hinge. It was easy to print and a lot stronger than the versions lying down. (https://www.thingiverse.com/thing:1396038) But…

Downloads
2,116
Likes
300
Rating
4.91
P
PrintablesDrakein3D

Challenge Coin Holder - upright display

Simple circular holder - fits most challenge coins. Quick print, no supports. Small footprint.

Downloads
1,731
Likes
157
Rating
5
P
PrintablesJan Tomášek

Ender-3 V3 SE Fan Duct - 5015 Right Side

0% infill (max 10%) Inner wall extrusion width 0.6 mm. PLA good enough.

Downloads
550
Likes
80
Rating
4.29
P
Printablessplatprint

Paradox Pokemon Slither Wing - Standing Upright

Pokemon Scarlet's Slither Wing, now printable! Some warnings: this is my first time trying to fix up a model! When scaled small, the wings tend to slice with holes or badly placed retractions/seams, probably due to the wings being tapered…

Downloads
444
Likes
59
Rating
5
P
PrintablesPrism08

Unimog RC accessories right side

31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…

Downloads
377
Likes
47
Rating
0
P
Printablesiqless

iQless Upright Ear Saver

This is an ear saver for masks. This print can be printed upright so you can print more at a time. In fact on an i3mk3 you can print 45 in one go :) Print instructions The 3mf files have setting to run the first 2 layers slower to help…

Downloads
298
Likes
11
Rating
5

Longer fan duct for Ender 3 S1 Stock fan mounted on the right.

The bracket to mount the stock fan an the right side can be found here: https://www.printables.com/model/213509-right-side-bracket-for-ender-3-s1-stock-fan

Downloads
289
Likes
66
Rating
0
P
PrintablesTedd007

MMU3 Buffer: colored, covered, upright

If you don't want to access your MMU buffer from behind but from above, this is exactly the right thing for you. In this version the buffer has been rotated 90 degrees so that the cassette slot is on the top . This has the great advantage…

Downloads
221
Likes
77
Rating
5
P
Printableslividcargo

Voronoi Upright Laptop Stand

An upright laptop stand, designed to fit Macbooks and tablets in an otterbox defender case. It should fit any newer Macbook Pro model (two slots this size) and an ipad in an otterbox defender case (one slot this size). The laptop slots…

Downloads
219
Likes
33
Rating
5
P
PrintablesSoontheman

OMNISTOR 5500 Endcap left & right

Left and right endcap for OMNISTOR 5500 motorhome awning. Developed in two parts - you have to glue it together.

Downloads
214
Likes
16
Rating
0
P
PrintablesGregory Verba

MK4 LoveBoard Cover Right Mod

I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…

Downloads
172
Likes
29
Rating
4.57
P
PrintablesAxioN

Return to Dark Tower: Archwright Battlement Token Standee

A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.

Downloads
145
Likes
16
Rating
5
P
PrintablesPeter Farell

Bronze Cast of President Lincoln's Right Hand

Bronze Cast of President Lincoln's Right Hand The Library of Congress has a bronze cast of Abraham Lincoln's right hand, made by Leonard Wells Volk in 1860. The cast depicts Lincoln's hand holding the sawed-off handle of a broomstick,…

Downloads
124
Likes
32
Rating
0
P
PrintablesBootcheekoh

Fan Duct - Dan A4 H2O Case - Thermalright AXP-90 X47

This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…

Downloads
112
Likes
4
Rating
0
P
PrintablesWindy

PRUSA MK4 Heatbed back cables cover - right side outlet MK4

I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…

Downloads
107
Likes
20
Rating
5
P
PrintablesDanny Dowding

storage bin right Ender 3 V3 SE

Decided i needed a storage bin for my printer, Clips onto the side rail of the printer and sits on the desk/table top so hopefully won't break under any weight. Will upload a better pic once i print it out.

Downloads
91
Likes
21
Rating
0
P
PrintablesClamikra

Stand for Withings Body Cardio Scale and BODY+ (upright position)

Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…

Downloads
83
Likes
14
Rating
0
P
Printablesdavid

Scrap box for right side of Prusa i3s

This is a Scrap Box that fits at the side of my Prusa Mk3s under the table right up to the Z-Axis motor I have changed the stl file now you can have a box with the text coming out as in the photos or the text going in to the box a little…

Downloads
62
Likes
1
Rating
0
P
PrintablesVodouch

VW Passat B5 Front Right Door Knob Rosette

I created the model as a replacement for a cracked original. It's not a 100% exact copy, but it's good enough for me. The printed model in the picture is a test model made of PLA, but due to summer temperatures it might be better to use…

Downloads
61
Likes
5
Rating
0

Foot to keep baby gate upright

Quick and dirty foot to prevent it from falling over. The bottom of this one was slightly over 40mm wide so it's squished a small amount to hold the foot on. Gate model is "Toddleroo by North States Quick Fit Oval Mesh Baby Gate", it'll…

Downloads
58
Likes
9
Rating
5
P
Printablesgrtych

V3 KE Right Removable Bin - Lower Height

Shortened the height of the removable bin so that Rui's Nebula Cam can still be utilized. Removed the Nebula Cam static mount

Downloads
49
Likes
14
Rating
0
P
PrintablesMaislins

Pegboard Accessory: Upright Pen and Object Holder; anything with a clip on the back

This model is used for traditional Pegboard with 1 inch (2.54 centimeters) seperation between holes. The model covers a total of 16 holes, 8x2. It is very useful to hold anything with a snaping style hook on the back meant to attach to…

Downloads
49
Likes
8
Rating
0
P
PrintablesFLWT Education

Frank Lloyd Wright - A.D. German Warehouse Concrete Frieze

Print your very own decorative frieze, inspired by those used to build Frank Lloyd Wright’s “A.D. German Warehouse". Wright's innovative concrete friezes were made by pouring concrete into molds. The concrete casts decorate the exterior…

Downloads
45
Likes
13
Rating
0
P
PrintablesChris D

XMAS LED Super Bright Lights - No vase mode and twist to turn on

XMAS LED Super Bright Lights - No vase mode and twist to turn on

Downloads
43
Likes
19
Rating
0
P
PrintablesDream

copyright - pin support KP3S

Просто загрузите файл на карту принтера и печатайте

Downloads
42
Likes
5
Rating
0
P
Printablesgrtych

V3 KE Right Removable Trash Bin - Shorter Length

Made the removable bin shorter in length to fit with the Nebula Pad being relocated.

Downloads
39
Likes
9
Rating
5
P
PrintablesSirHair

Dyson DC25 upright vacuum wand cap, part number: 914114-01

Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…

Downloads
38
Likes
2
Rating
0
P
Printablestom

Rechte Endkappe Wandanschlußleiste/ Right end cap wall joint trim

Ersatz für die rechte Endkappe unserer Arbeitsplattenabschlussleiste. Die Skizze ist ähnlich, der innnere Aufbau etwas anders. Translation: DeppL Replacement for the right end cap of our wall joint trim. The sketch is similar, the inner…

Downloads
35
Likes
5
Rating
0
P
PrintablesScott Gibb

Printer Enclosure 65mm Right Angle Modular Exhaust

Printer Enclosure 65mm Right Angle Modular Exhaust Summary This printable/thing is one iteration of the 65mm tubing system for the Printer Enclosure ventilation system. It utilises the same modular lock in plates. However this time it…

Downloads
33
Likes
5
Rating
0
P
PrintablesYardenSZ

Right Hand Rule - B/F/V

This is a right hand rule model. It was made for using in physics classes when making calculation of magnetic power. The hand is mine and it was scanned.

Downloads
29
Likes
5
Rating
0
P
Printablesnozzleshift.com

Front Right Bottom Magnetic Cable Duct for PrusaBox by Printer box

This an additional cable duct for the right side ( front ) of the PrusaBox if you have cables running here. You will need: Four 8x4 or 8x3 magnets (fix them with superglue, if necessary) Print with support. See picture: You can find the…

Downloads
28
Likes
8
Rating
0
P
PrintablesArgiraras

Shipwrights of the North Sea and Runesaga insert

An insert for Shipwrights of the North Sea and runesaga just because there is space in the box. Fits sleeved cards

Downloads
27
Likes
3
Rating
0
P
Printablessh

MK4 nozzle/scraper holder Z-TOP-RIGHT

Info: MK4 z-top-right-R2.stl customized to hold 4 or 5 nozzles and also scraper or any other tool optionally Print info: just like original, use PETG, 0.2mm layers, no supports

Downloads
27
Likes
4
Rating
0
P
Printablesnozzleshift.com

Rear Right Bottom Magnetic Cable Duct (Long version) for PrusaBox by Printer box

This an additional cable duct for the right side (rear) of the PrusaBox if you have cables running here. You will need: Five 8x4 or 8x3 magnets (fix them with superglue, if necessary) Print with support. See picture: This cable duct is…

Downloads
26
Likes
6
Rating
0
P
Printablesnozzleshift.com

Rear Right Bottom Magnetic Cable Duct (short version) for PrusaBox by Printer box

This an additional cable duct for the right side (short version) of the PrusaBox, which I needed, because I have a second raspberry on the outside of the Prusa Box and a lot of cables from my fire suppression system going in. Important!…

Downloads
25
Likes
4
Rating
0
P
PrintablesBooks

Copyleft/Copyright Coin

Coin with the copyleft symbol (or copyright, depending on orientation) engraved in it. Uses art from Wikimedia Commons .

Downloads
25
Likes
3
Rating
5
P
Printablesnozzleshift.com

Corner Cover for PrusaBox by PrinterBox Small Version/No cables (bottom rear right)

A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes without holes for cables. You need two 8 x 4 magnets. It is designed to use with my magnetic cable duct (see here…

Downloads
22
Likes
5
Rating
0
P
PrintablesKraiden

Apple "Always Right Way Up" Gimballing Logo

So is the logo on the new macbooks the right way up, or upside down? Some say right way up, because it's the right way, when the macbook is open. I say, that I payed for it, it should be designed for me, and I see it as upside down just…

Downloads
20
Likes
3
Rating
0
P
PrintablesHonzik1

CarryBright Bicycle Electric Car LED Turn Lights Side Mirror

I used PETG 0.2mm quality. If there is problem, turn it 180 degrees.

Downloads
18
Likes
2
Rating
0
P
PrintablesMücke

Maruzen - M870 - Action Bar Right - Airsoft - Free Download

Model of the right action bar of the Maruzen M870. Just in case yours breaks. It is normally meant to be cnc'd or printed in metal, but as I had surprisingly good results, just printing it in PETG, I will share my print file as well. But…

Downloads
14
Likes
6
Rating
0
P
PrintablesMichal K

Right Lid for side drawers w. Half-Life Logo

The side drawers are perfect solution, but I missed the right logo…

Downloads
14
Likes
5
Rating
0
P
PrintablesJörn

Bright solar-LED-Light for trunk of TESLA Model 3 (2021)

The lights in the TESLA model 3 trunk are much too dim and aftermarket lights are not really better or a very bright one could possibly draw too much current. So I bought a very bright solar LED outdoor light from amazon (see link below)…

Downloads
12
Likes
4
Rating
0
P
PrintablesAiden Sone DDS

Replacement Vegetable rail for right side drawer

Say Goodbye to Fragile Fridge Parts – and Hello to a Smarter Solution If you've ever felt the frustration of a broken refrigerator rail, you're not alone. After replacing the same flimsy plastic part twice —at a jaw-dropping $75 to $150…

Downloads
9
Likes
10
Rating
0
P
PrintablesMake-A-Print

Poseable Robot Hand (Right Hand) (PLA)

Hello print friends, as some people have requested, you will find now the “ right hand version ” of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…

Downloads
8,461
Likes
2,552
Rating
4.92
P
Printables3DPreviews

P.I.N.D.A A.D.J.U.S.T.A - The perfect tool to get your Pinda Probe to the right level

After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…

Downloads
6,305
Likes
976
Rating
4.81
P
Printablesharbormaster

Right Angle 90° Corner Clamp

This 90° Corner Clamp will give you a helping hand when holding 90° corners and "T" joints together securely during assembly. A second is included for “T” joints or to allow access for gluing. Great for things like constructing model…

Downloads
3,732
Likes
1,179
Rating
4.82
P
Printableshuba

Left / Right / Dual Thread Screws + Nuts

Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…

Downloads
3,297
Likes
595
Rating
4.9
P
Printables6d6178

Prusa Core One Nozzle Wiper V2 with Purge Bin (left & right)

This is a Nozzle Wiper Arm with Purge Bin for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads. It's available for both left- and right-side mounting. This is version 2 , an iteration of the popular version 1 , and…

Downloads
3,138
Likes
1,287
Rating
4.96
P
PrintablesBiomech

Core One Right Panel Hole Cover

Until you find a purpose for the hole in the right panel of Core One, this cover will keep dust out and heat in. I recommend printing it in PETG or any filament that can withstand 55°C of a fully heated chamber.

Downloads
3,126
Likes
802
Rating
4.98
P
Printablespaul_delta

Meta Quest 3 right controller

I used Hammer's great controller scan published on Grabcad and did my best to align it to XY axis as best as possible using Quest Pro model as reference. Simplified in Meshmixer and cleaned up in Sketchup to make it solid. Category: Scans…

Downloads
3,063
Likes
55
Rating
5
P
PrintablesSHaDoW6

K1 Max Right Middle Side Mounted Spool Holder

Hi, used these two great models, one from Fred Boisselier, https://www.printables.com/model/540699-creality-k1-max-side-load-spool-holder and the other from Hugo Groeneveld, https://www.thingiverse.com/thing:3020026 to create an excellent…

Downloads
2,818
Likes
198
Rating
4.89
P
PrintablesMiceciCZE

ROBAK 2 Super Bright LED BRACE

Super Bright LED Light Bar RC Car Roof Lamp CH3 Control for 1/10 RC Crawler Axial Capra SCX10 II 90046 RGT EX86100 TRX6 TRX4 D90

Downloads
2,279
Likes
35
Rating
0
P
PrintablesTUTA#92

Toilet - THRONE ROOM right side - sign, easy to print

Toilet - THRONE ROOM right side - sign, easy to print

Downloads
2,265
Likes
644
Rating
5
P
PrintablesMicah

G 17/19 Right Hand Holster

Something I recently learned is that the belt clip is a bit weak, so I just made some changes 5/1/24 and will keep the old files up, but be warned they are not awesome. NEW files use an 8 mm diameter spring to close the lock. If using the…

Downloads
2,229
Likes
233
Rating
5
P
PrintablesHaro

Ender 3 v3 SE Right bucket

2023/11/28 Update It was updated with some modifications to better match the shape of the base.

Downloads
2,169
Likes
303
Rating
4.88
P
Printablesmakermatto

Left/Right Fender Strat Guitar Knob

Replica of Fender Stratocaster knob. I made it also for lefthand guitar! update: added the version with numbers go to 11. Now you can have an extra push over the cliff! :D update2: thanks to the feedback I have enlarged a little bit the…

Downloads
2,086
Likes
227
Rating
4.77
P
PrintablesMrDefaultUser

Audio-Technica ATH-M40X hinge (left & right)

Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.

Downloads
1,959
Likes
70
Rating
4.9
P
PrintablesTickTock

HarvestRight Freeze Dryer Tray Stacker

[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…

Downloads
1,874
Likes
137
Rating
4.8
P
Printablesyamikinyu_com

Elegoo Centauri Carbon Nozzle connector puller. Right-side with Handle

Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.

Downloads
1,828
Likes
297
Rating
4.94

6" Corner Clamp, Right Angle Clamp, Positioning Square (v1.3)

This is a 6" corner brace (for clamping), aka right-angle clamp, aka positioning square. As requested, there are now four variations: A: Sharp corner — measurements on sides (inches & millimeters) right down to zero B: Corner nipped — for…

Downloads
1,788
Likes
263
Rating
4.92
P
PrintablesTheWeirdCrafter

Right angle clamp

No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : M8 nut M8 x 80 (or longer) screw/bolt

Downloads
1,699
Likes
594
Rating
5
P
Printablesoriddlero

Tool Trays - Prusa MK3S Right & Left Side w/ Honeycomb, PRUSA logo & 45 Degree Matched OEM Front

The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…

Downloads
1,682
Likes
402
Rating
4.93
P
Printablesautomontronic

Right Angle Bracket/L Bracket/90 Bracket

A 3mm thick 15mm x 15mm right angle bracket with two 4mm holes and side supports.

Downloads
1,599
Likes
111
Rating
4.6
P
PrintablesLocalOutlier

Low profile right angle screwdriver handle

I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…

Downloads
1,556
Likes
489
Rating
4.94
P
PrintablesDaniel B

Right storage box with an angle

As the title said, added an angle to the storage box. It does not match the angle of the display unit but the knob is free. Copied from https://www.prusaprinters.org/prints/31977 Print instructions Printed with .30 and PETG. But would…

Downloads
1,544
Likes
263
Rating
4.81
P
PrintablesThomCraft3D
Downloads
1,536
Likes
496
Rating
5
P
PrintablesWhisky Lima

Strong Right Angle Shelf Bracket

This is nothing special, just a basic bracket to use in a pinch but is surprisingly strong. I printed mine with 6 walls and 35% infill and have been using 2 of them to hold a wooden shelf with up to 11 rolls of filament at any one time.…

Downloads
1,500
Likes
152
Rating
5
P
Printablesaleprint

Ender 3 V3 SE Right Bin / Bucket

Ender 3 V3 SE Right Bin / Bucket If you repositioned your LCD stand, there is a shorter version. https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand Don't forget supports!! Left version can be found here:…

Downloads
1,488
Likes
191
Rating
4.82
P
PrintablesKeenan Finucan

"Blade Runner" Ennis House Tile - Frank Lloyd Wright

Originally designed by Frank Lloyd Wright for the Ennis house built in Los Angeles, 1924. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that…

Downloads
1,450
Likes
207
Rating
5
P
PrintablesBaGooN

Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter

I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…

Downloads
1,390
Likes
92
Rating
5
P
PrintablesSemaphoreSlim

Intex Bestway Pool Right Angle Outlet

This outlet replaces the existing standard one in your pool I have a 15x42 Intex pool, and it seems that between the threads or the diameter of the outlet cover, the other designs are slightly off for what I have. This design matches the…

Downloads
1,368
Likes
163
Rating
5
P
Printables3DiXY

Bambulab X1 Plate Holder, Left + Right mountable

It is designed for the Bambulab plates but I guess it will work for other plates as well… I added the missing "coupler" to couple the front and back. I glued the parts together. and mounted them to the printer with double sided tape. The…

Downloads
1,324
Likes
431
Rating
4.91
P
PrintablesSpank

Playstation PS5 wall mount (left/right sided)

Printed on PLA infill 50 % to be very solid and strong , i think its better if you can print it on PETG How about buy me a coffee buymeacoffee.com/spank7

Downloads
1,257
Likes
164
Rating
3.67
P
PrintablesOneiro

Raspberry Pi 5 Rack Mount - right sided

In search of a suitable 19" rack mount for a Raspberry Pi 5, I couldn't find anything suitable. The model was inspired by LittleProgrammers' "Raspberry Pi 5 Rack mount," which however did not meet all of my requirements. These…

Downloads
1,239
Likes
137
Rating
4.91
P
PrintablesUncleFrankSays

UFS-069 Try Square & Corner 90 Degree Right Angle Clamp

This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…

Downloads
1,181
Likes
178
Rating
4.86
P
PrintablesWaschbaer91

Sleek and upright-friendly Bomb Busters Insert

This insert stores the basic components of the Bomb Busters game, while the advanced components are stored in their cardboard boxes. It is designed so that the box can stand upright without the need for lids. The model features a special…

Downloads
1,124
Likes
86
Rating
4.83
P
PrintablesAvgjo

1:50 scale 1905 Wright Flyer (Glider)

Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…

Downloads
1,100
Likes
289
Rating
4.86
P
Printablesshay

K2 Plus - Right poop chute with removable bin

Creality K2 Plus - bin Right position This chute model is for the Creality K2 Plus printers. The chute is designed so that it does not interfere with the normal operation of the fans that are located on the back of the printer. It is…

Downloads
1,090
Likes
96
Rating
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Right Hand)

In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…

Downloads
1,080
Likes
163
Rating
3
P
Printablespbechard

R2D2 Google Home Mini Upright

I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…

Downloads
1,044
Likes
170
Rating
4.55
P
Printablesthall72

Lego Compatible (10124.dat) Bigfig Hulk Arm Right

This model is compatible with the lego system.

Downloads
1,020
Likes
102
Rating
0
P
Printablesthall72

Lego Compatible (10126.dat) Bigfig Hulk Hand Right

This model is compatible with the lego system.

Downloads
1,015
Likes
100
Rating
0
P
Printableshennedo

Low profile right angle cap for Neutrik NC3MXX

Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…

Downloads
990
Likes
91
Rating
4.83
P
PrintablesGentleTide

Anycubic Kobra S1 Right Side Poop Chute and Bucket

Poop Chute: The chute will print on the Kobra S1 build plate diagonally with some rotating. I've added a 3mf file with the print oriented already. Update: I've created a “5cm” version that is deeper than the original (3cm). Sometimes,…

Downloads
985
Likes
73
Rating
3.67
P
PrintablesShahriyar

Replacement Hinge Swivel Part for Sony WH-1000XM4 Headphone (Left+Right)

This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…

Downloads
983
Likes
47
Rating
4.88
P
PrintablesWindy

PRUSABOX Heatbed back cables cover - right side outlet

I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…

Downloads
970
Likes
88
Rating
4.96
P
PrintablesWuup

Click-in Hinge Rightside

I printed it upright in PLA on my MK3S+ no problems or support

Downloads
945
Likes
495
Rating
4.5
P
PrintablesZeroDotCMD

Cartographer 3D RIght Angle K1 Series Mount

Right Angle Cartographer Mount This mount is designed to be used with the Cartographer 3D Right Angle V3 probe. This is a side mounted design, featuring zero Y offset, reducing the effects of Axis Twist . Help support my work with Ko-Fi…

Downloads
887
Likes
97
Rating
5
P
PrintablesTim W.

K2 Plus poop slide Left and Right

Google Translator: I once created a poop slide that you can easily print and that should work with 1-2 magnets (8mmx3mm) and the original screws or with 8 magnets (I haven't tested the pure magnet version yet)! The chute cannot be…

Downloads
883
Likes
46
Rating
5
P
PrintablesSHaDoW6

K1 Max Right Rear Side Mounted Spool Holder

Hi, I used a great models from Hugo Groeneveld over at https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max. This model replaces the two back screws with (M3*10) for…

Downloads
878
Likes
96
Rating
5
P
PrintablesTidal

AAP-01 One Side Charging Handel Ambidextrous left / right

Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…

Downloads
875
Likes
71
Rating
4.75
P
PrintablesAndreas G

Boomerang for left and right handers

Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added

Downloads
865
Likes
124
Rating
5
P
PrintablesPhrat

fiat grande punto, punto evo rear parcel shelf clip (gancio cappelliera) left and right

replacement part for a fiat grande punto or punto evo Printing settings: Print in PETG or higher temperature material 4+ perimeters Supports everywhere print laying on its side

Downloads
864
Likes
52
Rating
5
P
Printablesngathant

Right Angle 90' Corner Clamp

Use 1 inch long 1/4-20 bolts and wing nuts for this remix. I got the zinc ones from Lowes. Print Settings: Overture PLA at 215'C hot end / 60'C bed Smart fill supports at the 3 bolt ceilings 0.3mm layer height DRAFT 30% cubic infill

Downloads
864
Likes
194
Rating
4.75
P
Printableswasyl00

Meta Quest 3 right controller 3d scan

This is quick mirror of the great scan by Chri. Cheers!

Downloads
825
Likes
28
Rating
0
P
Printablesyamikinyu_com

Elegoo Centauri Carbon Nozzle connector puller. Right and Left combined

Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…

Downloads
797
Likes
158
Rating
4.5
P

Right side Webcam Holder / Mount for Elegoo Neptune 3 and 4 Series (incl. Pro / Plus / Max)

Based on the design (https://www.printables.com/de/model/392102-elegoo-neptune-3-webcam-mount) I made a mirrored version and made the contact surfaces a little thinner for a better fit. Fits the Elegoo Neptune 3 and 4 Series (incl. Pro /…

Downloads
785
Likes
109
Rating
5
P
Printablesdromanol

The Mandalorian beskar armor right arm

The Mandalorian beskar armor right arm (flamethrower). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Fixed wrong surface on right attachment. UPDATE: Fixed…

Downloads
784
Likes
134
Rating
0
P
PrintablesJemima9876

Ryobi link tool holder upright

Tool holder for the ryobi link. I printed some with 40% and some with 50% infill // PETG and .08 nozzle// gyroid infill with Rectilinear top and bottom layers. // with supports on the build plate

Downloads
781
Likes
102
Rating
5