Search results: ringe

Sort order

995 models

P
PrintablesPrusa Research

Blue-ringed Octopus tool holder

The blue-ringed octopus model pushes the edge of multicolor printing and it's a great example of the INDX capabilities. Once printed, it can hold all the tools that came with the printer and a benchy in its tentacles. The model is…

Print approx. €39.82–€48.67 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
167
Rating
5
P
Printablesbuchnema

Syringe Case – Secure Pre-Filled Syringe Storage for Travel

This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
303
Likes
38
Rating
5
P
PrintablesJoe Balough

e6000 to Luer Lock Syringe Adaptor

Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
295
Likes
30
Rating
0
P
Printables3DPrintM.D.

Ergonomic SMD Solder Paste Dispenser for 1ml and 3ml Syringe

For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
267
Likes
61
Rating
4.5
P
PrintablesCabista

Ringed Star Amulet / Earring

Ringed Star, wearable as Amulet and/or Earring.

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
246
Likes
43
Rating
5
P
Printableszonurben

Behringer X-Touch Faderknopf

Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
235
Likes
22
Rating
0
P
Printablesfivesixzero

Skadis Holder: Flux Syringe and Pen Holder (uses heat set inserts)

Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…

Print approx. €22.67–€27.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
210
Likes
38
Rating
5
P
PrintablesMojojojo3

Behringer X32 Fader Knob

This will fit on a Behringer X32 sound board. No supports needed.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
8
Rating
0
P
PrintablesJV Lobo

Syringe Booster

It prints with no support in around 1h using the “draft” setting on Prusa Slicer which has a .24mm layer height and a 15% infill.

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
19
Rating
5
P
Printablesthat1guy

Ringed cylinder

Use this model to organize your house, plant your flowers, hold your toothbrush, hold your pencils, or be part of a larger model

Print approx. €3.99–€4.87 excl. taxPreliminary estimate for one variant

Downloads
126
Likes
1
Rating
0
P
Printablessamede.de_

Schmuckbox / Ohring / Ringe

Eine Tolle Kompakte Box um die Schmuckartikel zu verstauen.

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
1
Rating
0

ProPipette - luer splip syringes conversion kits

ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
25
Rating
0

Syringe clip for vests, backpack

This item is part of an initiative carried out in cooperation with the Dobre Praktyki foundation: https://www.dobrepraktyki.org/nasze-projekty/wydruki-3d Created for paramedics in order to keep most important syringes ready to use at…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
6
Rating
0
P
Printableslordbale

Dartscheibe übungsringe

Verschiedene Dart übungsringe

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
2
Rating
0
P
PrintablesRay Fox

LED stringed lights support to illuminate pictures

LED stringed lights support to illuminate pictures

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
2
Rating
0
P
PrintablesTraincrossin

Behringer CMD PL-1 Angled Riser

Simple angled stand for the Behringer CMD PL-1 MIDI controller. Prints in two parts and fits on a Prusa Mini

Print approx. €7.23–€8.84 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
3
Rating
0
P
Printablesh2odragon
18+

The source marked this model as adult content.

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
9
Rating
0
P
PrintablesFool3

Deathbringer machine from HZD (updated)

Detailed model of Deathbringer from HZD, updated to be in almost one piece and with extra detail. Just glue the rockets onto the Deathbringer after printing. First model ever, enjoy :)

Print approx. €8.54–€10.44 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
3
Rating
0
P
PrintablesRNieland

Syringe holder

During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. I made two models: one with a clip for your chestpocket and one with a hole for a keyring. Choose…

Downloads
2,709
Likes
208
Rating
5
P
PrintablesAllpa

2026 - Lucky charm with shopping cart coin / Glücksbringer mit Münze für Einkaufswagen

Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…

Downloads
2,481
Likes
226
Rating
4.9
P
Printables660Prints

Argonath Buchhalter - Der Herr der Ringe / Lord of the Rings

Das Argonath, auch bekannt als die "Zwillingsstatuen", ist ein beeindruckendes Monument aus J.R.R. Tolkiens „Der Herr der Ringe“. Dieses detaillierte 3D-Modell der majestätischen Statuen von Isildur und Anárion ist nicht nur ein…

Downloads
2,346
Likes
406
Rating
5
P
PrintablesJochem

Slider fader knob for Soundcraft, Yamaha, Behringer mixer

Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…

Downloads
1,337
Likes
150
Rating
5
P
PrintablesDuBois

S.I.M.P. the Stringer Internal Magazine Pistol (Nerf Blaster)

S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…

Downloads
1,215
Likes
285
Rating
4.67
P
PrintablesLeedle Dynamics

Cricket - Low hardware stringer pistol

I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…

Downloads
1,144
Likes
228
Rating
4.77
P
PrintablesKirby Downey

Fatebringer hand cannon from Destiny

Fate bringer hand cannon is a rare weapon which drops from vault of glass raid. this model prints on one bed and has holes for a 4.8mm metal rod to help with alignment and gluing. Print instructions Print all the parts as the import…

Downloads
1,132
Likes
177
Rating
4.71
P
Printablespastasauce

Button Overlay for Behringer X-Touch universal control surface with XR32 / XR32 & XLive

Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…

Downloads
1,062
Likes
31
Rating
5

Syringe

Syringe for putty and thick materials with a removable nozzle ,I recommend printing from Petg, it will withstand a higher load

Downloads
1,000
Likes
102
Rating
4
P
Printablessamsve

Rust Medical Syringe

This is a Medical Syringe from the game Rust. A label for it is also uploaded, might need some tweaking irl. UPDATE Made an adjustment to the thickness of the needle cap walls for better printing. Non commercial prop. Category: Props

Downloads
942
Likes
87
Rating
4
P
PrintablesThefrankenator

Darth Fader Behringer Console

Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.

Downloads
883
Likes
50
Rating
5
P
PrintablesLes Kaye

General purpose hobby syringe

General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…

Downloads
875
Likes
101
Rating
3.33
P
PrintablesKlaus Krämer

Putzausgleichsringe 60mm / High Plaster Distance Rings 60 mm 6 - 25 mm height)

Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…

Downloads
875
Likes
62
Rating
5
P
Printablesrobstinylife

3-Tier Behringer-style Synth Stand

A rack large enough to fit 3 Behringer-style desktop synth modules. I designed this at the request of a friend who was rapidly running out of desk space, based on some existing designs found online. This will fit any 3 modules of equal…

Downloads
865
Likes
97
Rating
5
P
PrintablesLeedle Dynamics

Stringer Mega Masterkey

This is just a tiny and simple stringer to put anywhere on your blaster to fire at roughly 60 fps, so nothing to write home about but probably highly useful for close quarters games against shields or special targets that require mega…

Downloads
842
Likes
210
Rating
4.8
P
Printablesmfetting

Vial Case for Syringes and Vials

A Travel Case to hold Vials and Insulin Syringes. Holds five vials up to 16.5mm in diameter and 32mm in height Fits commonly used 3MM Vials Holds syringes up to 120mm in length Fits commonly used 100-unit insulin syringes Room for Alcohol…

Downloads
832
Likes
82
Rating
4.33
P
PrintablesDavid McFarland

Oathbringer - Dummy13

“Accept the pain, but don't accept that you deserved it.” - Dalinar Kholin , from Oathbringer by Brandon Sanderson A neat little, to-scale (roughly, at least, Alethi heights are weird to have to work with) Oathbringer, to include the…

Downloads
817
Likes
161
Rating
4.67

Parametric Luer Lock Dispenser Tips for Syringe (SCAD)

These use the lock portion from #3712257, allowing the tip length, diameter, and style to be customized. Included is a collection of simple round and flat tips, as well as a couple examples of angled and offset flat tips. STL files are…

Downloads
800
Likes
100
Rating
5
P
PrintablesEggnog

Derringer Model 95

Visit the original page for more detailed instructions. I used any screws and bolt I could find to assemble it. Be prepared for a lot of sanding. I used plastic boxes/trays to emulate the spring as the original poster suggested. I don't…

Downloads
788
Likes
55
Rating
5
P
Printableslovelytuna

composite resin adhesive syringe holder

You can print each of these three components separately and then glue them together for use.

Downloads
787
Likes
84
Rating
5
P
Printablesgrizzie17

Syringe and Vials Case

Case to hold seven vials and associated single use syringes. This is print in place. Each vial is approximately 20mm dia. x 39mm high. Syringes are BD 1ml TB. Printing No Supports Change History 2024-02-15: Provide space for 39mm tall…

Downloads
785
Likes
78
Rating
5
P
Printablesszutsgy

Behringer TD-3 or RD-6 double stand

This stand can hold two synthesizer. You have to take apart the model in slicer to fit onto bed. You can use heat inserts and 3mm screws or simple glue them together. The two side can held together also if you heatinsert 4 screwnuts on…

Downloads
771
Likes
27
Rating
5
P
PrintablesDaniel-Waiger

Syringe cap

0.3mm layer height. 100% infill no supports Esun PLA+

Downloads
722
Likes
100
Rating
5
P
PrintablesJack

Syringe Applicator

plunger rack for syringes for controlled dosages. A second ring above can be used to lock the plunger in place.

Downloads
720
Likes
283
Rating
5
P
Printablesakimakes

Syringe Screw Feeder

Summary: This syringe screw feeder helps extruding fluids from a syringe ... ... in a controlled way ... with substantial pressure ... with accurate dosage Extruding e.g. 0.1ml from a 2ml syringe is no problem anymore, even if more…

Downloads
707
Likes
91
Rating
5
P
PrintablesCorvus

LANKA Overhaul ___ (mods for Leedle's Lanka stringer blaster)

Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…

Downloads
702
Likes
208
Rating
4.83
P
PrintablesBobertmaX

MWO Hellbringer

MechWarrior Online Hellbringer, roughly 130mm tall. Fully articulated, and tested, all parts are error free and printer friendly. Multiple Torso and weapon options, and like the Atlas, does not require any glue for assembly. I used a…

Downloads
699
Likes
137
Rating
0
P
Printablesgoombasinastack

Cricket Pro - High power, low hardware stringer blaster

Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…

Downloads
690
Likes
145
Rating
4.64
P
PrintablesEZ-CORER

HARLOT Derringer case UP-DATED - ADDED case .STEP files

designed this case to fit on the shelf in my safe. print the latch at 100% infill. you will need: 2 - m3 x 18 button head machine screws (for the hinge) 2 - m3 x 23 or 25 button head machine screws (for the latch and the latch catch)…

Downloads
673
Likes
36
Rating
0
P
PrintablesSpdgoat

Behringer X32 Fader Cap

This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…

Downloads
652
Likes
38
Rating
4.67
P
PrintablesAcE Krystal

Needle / Syringe Caps

A needle cap to protect your (mostly workplace) needles, store them a bit more safe and without smudging you other stuff with its liquids :) I mainly want to use this on all of my solder flux and solder paste needles. But recently also…

Downloads
630
Likes
91
Rating
5
P
PrintablesGoMorko

Springed Catcher - miniature painting handle

Fully printable, springed and auto closing, miniature holder. It can hold wide variety of bases - spanning from 20mm to 40mm (and more with a proper arms variant!) This is part of larger collection of compatible (though less mechanical)…

Downloads
629
Likes
97
Rating
5
P
PrintablesAMOVFC

stringer pico mmu with 996R servo

WARNING DO NOT USE A 996 SERVO WITH A EBB36/42 YOU WILL KILL YOUR BOARD the 996 servo can draw a peak of 1.5 amps which is enough to fry the 1 amp 5v rail that is found on the big tree tech ebb boards. I just found this out the expensive…

Downloads
581
Likes
104
Rating
5
P
PrintablesDuBois

Fortinbras: A Fully 3d Printed Nerf Stringer Flare Blaster (Uses DB Shells)

"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…

Downloads
581
Likes
169
Rating
5
P
PrintablesPippa

Syringe earrings

Syringe earrings that come in 4 versions

Downloads
574
Likes
227
Rating
4.5
P
Printablesworstcase

Desktop Stand for Behringer Crave and Edge

Since I only have very little space in my music area, I developed a compact stand for the two Behringer synths. I have sized everything so that in order to protect the synths from scratches, you can easily apply 1mm anti-slip pads in the…

Downloads
547
Likes
45
Rating
0
P
PrintablesLMR0X

Syringe dispenser

A ratcheting syringe dispenser for ~15mm OD syringes. The ratchet has a tongue that flexes to move on to the next tooth on the plunger. Its function relies on friction applied to the plunger which is usually from the rubber tip of the…

Downloads
540
Likes
126
Rating
3
P
Printablesdanandrei96

Luer-lock syringe cap for flux, solder paste, etc

Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…

Downloads
533
Likes
91
Rating
4.8
P
PrintablesJulian0815

2026 Gimbal Lucky Charm / Glücksbringer

2026 Gimbal Lucky Charm / Glücksbringer with different ring clearances from 0,20 mm to 0,35 mm. Beside the different clearances, the Gimbal Lucky Charm is also available in different versions: 2026, for single tool 2026, for multi…

Downloads
493
Likes
49
Rating
5
P
PrintablesGameFan

Behringer UMC22 mount

Printed in 2 parts (left and right side). I used PETG, use whatever filament you want. Parts are oriented for printing, I printed it with 0.3mm nozzle (because I'm insane), you can use whatever you want, preferably 0.4 or 0.6mm. Use a…

Downloads
484
Likes
58
Rating
4.8
P
PrintablesCursed

Fatebringer - Destiny 2

This is a relatively easy print; however, I will say these models are not to scale, so if you are looking for a 1:1, make sure to set the scale to 75%. Besides that, I highly recommend orienting the models to have the most surface area…

Downloads
476
Likes
134
Rating
5
P
PrintablesNK6150

Behringer Wing notebook pad (updated)

Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.

Downloads
450
Likes
26
Rating
0
P
PrintablesKophi

13mm Flux syringe plunger

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…

Downloads
448
Likes
39
Rating
5

FLP-05, the Springer Perilous

This is the Springer Perilous. It is a long draw side-mag pump action threaded rod springer. It has linear rail in the prime. It has a quick swap spring cap, and uses 11" springs. It uses Talon mags. It is capable of achieving well over…

Downloads
440
Likes
121
Rating
5
P
PrintablesRobert Gogete

Automatic syringe plunger for MG90S servo

Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…

Downloads
420
Likes
160
Rating
0
P
PrintablesStagebox

Recessed Rackmount for Behringer X Air XR18

I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…

Downloads
388
Likes
28
Rating
5

Parametric Heavy-Duty Tube Roller Squeezer Wringer Thing

Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…

Downloads
374
Likes
49
Rating
4.75
P
Printablesthall72
Downloads
370
Likes
43
Rating
0
P
Printablespflug

Solder paste (FLUX) & UV-mask - stand for 5x syringes

Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers

Downloads
355
Likes
35
Rating
5
P
PrintablesPiotrK

Plunger with cup opener ( UPDATE 1 ) for soldering paste syringe for KOKI 40g/10ml and some other paste or flux syringes

This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…

Downloads
354
Likes
40
Rating
5

Sealed Syringe Disposal Box - Print in Place - No Supports

Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…

Downloads
353
Likes
63
Rating
0
P
PrintablesCpu77

Refrigerated Peptide/Insulin Syringe 2x a Day 1 Week Storage

I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…

Downloads
347
Likes
49
Rating
3
P
PrintablesFoxdude

syringe

prop syringe

Downloads
343
Likes
17
Rating
5
P
PrintablesAlex

Schlüssel für EATON M22 Befestigungsringe

Mit diesem Schlüssel lassen sich EATON-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu befestigen…

Downloads
343
Likes
34
Rating
5
P
PrintablesMichael Kehm

Syringe adapter

This is a model of the syringe adapter used by “Stem inventions” in the video Young Engineers: Pneumatic Machine - Build a DIY Air Pressure Powered STEM Project for Kids I was only looking for the adapter but couldn't find it anywhere…

Downloads
326
Likes
24
Rating
0
P
Printablespopatze

Behringer X32 Halter für Tablet / Holder for Tablet or Mobile

Die ist eine Weiterentwicklung von Christian Tablethalter. Einfach zwei, oder besser drei, der Halterungen ausdrucken und mit den Original-Schrauben des Mischpults befestigen. Die Halter sollten auf der Seite liegend gedruckt werden. Ggf.…

Downloads
322
Likes
24
Rating
0
P
PrintablesSkyla157

4oz (118ml) Medicine Syringe Holder

This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household

Downloads
320
Likes
29
Rating
5
P
PrintablesDevrosx

Syringe adapter for epson clogged print head

Use with standart 75 syringe with cleaning fluid to fix clogged head. Tested with bathrom cleaner to fix my frint head and all works on first try... Video how to prepare for cleaning Should work whit these models (tested with EPSON XP960)…

Downloads
320
Likes
22
Rating
5
P
Printablestop_gun_de

Grease-Nozzle for Syringe

Regreasing the linear rails on my printers is a frequent task, and with the many rails that don't have working grease-holes, it's a bit awkward to get grease into the raceways without taking the cart off. I have established a routine to…

Downloads
317
Likes
51
Rating
5
P
PrintablesAnubis MK

Modellbahn Spur N – Ladegut – Fass mit 4 Ringen – 16 Stück

Modellbahn Spur N – Ladegut – Fass mit 4 Ringen – 16 Stück Da sich das Zubehör für die Modellbahn mittlerweile keiner mehr leisten kann oder will, habe ich das Ladegut für die Modellbahn Größe N entworfen, die Fässer sind mit FreeCAD…

Downloads
311
Likes
18
Rating
5
P
PrintablesDerek Sheedy

Behringer X32 larger phone holder

At the time of the Behringer X32 release, the iPhone 3 was the main iPhone and the 4 was just about to be released. The phone holder on the X32 was designed to fit these older phones, but now 13 years later, the holder is no longer able…

Downloads
309
Likes
24
Rating
5
P
PrintablesMario Sta
Downloads
305
Likes
11
Rating
5
P
PrintablesOrion3D Studios

Oathbringer Bookmark

A bookmark modeled after the legendary Shardblade Oathbringer.

Downloads
301
Likes
69
Rating
4.67
P
PrintablesMatej2510

Fidget springer

---------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------- This toy is designed to get a rocking feeling…

Downloads
284
Likes
53
Rating
0
P
PrintablesMichael

Glücksbringer / Talisman / lucky charms Kleeblatt Herz

sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…

Downloads
283
Likes
17
Rating
4.6
P
PrintablesWilfred

Behringer mixer stand

A table stand for my mixer. this way I can see all the controls at a glance and from a distance. you can loop the cables under the beam to keep it a bit tidy. Use some force to clamp the parts together. It's a tight fit.

Downloads
280
Likes
64
Rating
4.8
P
PrintablesHappy print

Syringe keychain

I recommend printing on 100% fill for strength.

Downloads
279
Likes
51
Rating
4.67
P
PrintablesMikyner

LM8UU / LM10UU Linear bearings lubricator aplicator for luer lock syringe

Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.

Downloads
278
Likes
47
Rating
5
P
PrintablesDOTWAVE

Ringed Wand from Hogwarts Legacy

I've included the fusion file as well as the stl. It is 12" long and was modeled off a screenshot and traced (then extruded/revolved) in fusion. Its a simple model so whatever settings you are comfortable in I would suggest going with…

Downloads
276
Likes
50
Rating
0
P
PrintablesLIBRE hub

Open-Source Syringe Pumps

The open-source syringe pump is a standard research instrument for use in microfluidics and several other laboratory workflows. There are numerous designs available in the realm of open-source syringe pumps. We have combined some of the…

Downloads
268
Likes
100
Rating
5
P

Behringer UMC22 Mounting Brackets

Brackets I used to mount a UMC22 underneath my desk. Should also fit a UM2, but I don't have one to test with. Takes just over 1.5hrs to print each bracket on my Cetus. Mounting holes are sized for #6 flat countersunk screws. You can also…

Downloads
265
Likes
24
Rating
0
P
PrintablesRafael Cerro

HSW syringe - flux holder

maximum syringe diameter supported 18,5mm PLA

Downloads
264
Likes
43
Rating
5
P
PrintablesDave Jackson

Springerle Flower Biscuit Mold

A Springerle mold creates uniform biscuits that are more 3 dimensional and can have more intricate designs. This Flower shaped mold can be used with Sugar, Shortbread or Gingerbread dough. The mold is first lightly oiled and then…

Downloads
263
Likes
32
Rating
5
P
PrintablesBaud Girl

6mm Trim Pot Cap Encoder Knob for Korg Volca, Roland Aira Compact, Behringer Mini, M-VAVE FM-1 and more

This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…

Downloads
260
Likes
39
Rating
5
P
PrintablesLucas

1ml syringe holder 12 pieces

I developed an holder for 1ml syringe. We used it for COVID19 vaccinating. Its a versy simple model You can use it with silicon sticky feet → Diameter 5mm. Print instructions Print with 0.4 mm nozzle. Layer height 0.2 mm gives great…

Downloads
259
Likes
33
Rating
5
P
Printablesksxx

Behringer XR18 faceplate

The faceplate has pockets for 6x2mm magnets to hold the faceplate on the mixer. You can press them in or add some glue. You can print the model as it is and use a pen to label the inputs. I added extruded text for the labels and printed…

Downloads
258
Likes
35
Rating
0
P
PrintablesBob Hayes

Insulin Syringe Holder

The top and bottom will fit very tight - so tight that it will be hard to put it. You will need to put it on and take it off a few (maybe many) times for the fit to loosen up a little. It will take a little work. You want it to be tight…

Downloads
254
Likes
20
Rating
0
P
PrintablesLama

60ml Syringe Grip

60ml Syringe Grip: Better Handling for Easy Gavage Feeding or thick liquid (resine like) My 60ml Syringe Grip makes it easier to use the plunger, which can sometimes be challenging during gavage feeding. It provides a better grip for…

Downloads
253
Likes
15
Rating
0
P
PrintablesCarsten

Behringer 2600 Illuminated Sliders

The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…

Downloads
252
Likes
22
Rating
5
P
PrintablesAndrzejerzy

Syringe holder for Molle system

Syringe holder for Molle system made for paramedic tactical vest fits 1x5ml 1x10ml 1x2ml syringes printed in resin, also suitable for filament with 0.4mm nozzle and 100% infil preferable material PET-G or ABS/ASA

Downloads
252
Likes
36
Rating
0
P
PrintablesMH-3DP

Lucky Charm 1 cent coin (lucky pig) // Glücksbringer 1 Cent Münze (Glücksschwein)

Give the gift of happiness for the new year! Simply combine a 1 euro cent coin with this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! (I printed with a 0.4 mm nozzle and 0.2…

Downloads
251
Likes
30
Rating
4.83
P
PrintablesRdw5e3

Angled Stand for Behringer X TOUCH ONE

Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.

Downloads
251
Likes
15
Rating
5