Search results: rna

Sort order

11,722 models

P
Printablesfixumdude

Snowflake TIE Fighter Kit Card Ornament

UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…

Downloads
44,888
Likes
12,222
Rating
4.91
P
PrintablesPopandsicle

Christmas Tree Ornament Set (Vase Mode Prints)

A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…

Downloads
39,379
Likes
10,633
Rating
4.94
P
PrintablesRetroMaker

Snowglobe Votive Ornament - Winter Cabin

This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…

Downloads
38,807
Likes
6,695
Rating
4.9
P
Printablesjamesgt

Voronoi deer ornament

See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…

Downloads
23,029
Likes
5,051
Rating
4.88
P
PrintablesHank

Snowman Tea-Light Ornament – 3D Printed Holiday Glow

Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…

Downloads
19,729
Likes
3,115
Rating
4.97
P
PrintablesOld Lady

Christmas Tags/ Christmas Ornaments

More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament

Downloads
18,841
Likes
3,200
Rating
4.91
P
PrintablesJosef Průša

Grinch Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Downloads
17,842
Likes
3,264
Rating
4.97
P
Printablesh3li0

christmas ornaments

christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…

Downloads
15,596
Likes
4,048
Rating
4.95
P
Printablesbasti30

Snowflake X-Wing Kit Card Christmas Ornament

Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…

Downloads
14,517
Likes
4,206
Rating
4.92
P
PrintablesJack

String Ornaments

If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower

Downloads
13,120
Likes
3,958
Rating
4.95
P
Printables29flo

Gothic Ornamental Chess Set

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…

Downloads
12,617
Likes
2,838
Rating
4.86
P
Printables3D PRINT

Christmas ornament with articulated legs

Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.

Downloads
7,952
Likes
1,247
Rating
4.83
P
PrintablesPRNTR3D

Spiral Ornament by PRNTR3D - Super Easy Print - Vase Mode

Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…

Downloads
7,746
Likes
1,869
Rating
4.99
P
PrintablesSylveonika

Bullet Journal Template

Bullet journal template Bullet journaling is a customisable organisation system that combines a planner, diary, and to-do list in a single notebook to enhance productivity and track personal goals. I've created this template to speed up…

Downloads
7,305
Likes
3,167
Rating
4.74
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
7,243
Likes
1,619
Rating
4.96
P
Printablesuetam3

Christmas Ornament Set – Stars, Snowflakes, Bells & Trees

This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…

Downloads
7,224
Likes
1,271
Rating
4.94
P
PrintablesLyl3

Customizable Christmas Name Ornament

Customizable Christmas Ornament - Name Ornament - Snowflake Ornament This is a customizer for Christmas ornaments which allows for any text in any font. There is a choice of six different snowflakes which can be placed in four set…

Downloads
7,191
Likes
991
Rating
4.91
P
PrintablesChad Birchem

Interlocking Spiral Christmas Ornament - No Supports!

Christmas ornament or holiday fidget toy. There is a hole in the top to feed a string or ornament hook to hang from your tree just download the "snappable" version. In this version the two pieces snap together so it can hang from a…

Downloads
7,149
Likes
1,322
Rating
4.95
P
PrintablesCitywrecker

Calibration Bro ( CaliFlower Calilantern Calibration cross alternative) - Calibration shape + Calculator - Klipper & Marlin

Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…

Downloads
6,669
Likes
677
Rating
4.76
P
PrintablesCalebTimoteo

Millennium Falcon Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
6,419
Likes
1,706
Rating
4.94
P
PrintablesJohination

Christmas Ornament Collection Chrismas Tree / Weihnachtsdeko für Christbaum

change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER

Downloads
6,061
Likes
864
Rating
4.77
P
Printablesm_collectable

Open Frame Spiral & Lattice Holiday Bell Ornaments – Elegant Christmas Decor

Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…

Downloads
6,058
Likes
1,211
Rating
4.98
P
PrintablesB M A

*REALLY WORKS* Centauri Carbon Silencer Quiet DUAL Fan Shroud Muffled Intake Exhaust & Improves Internal Temps

All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…

Downloads
5,896
Likes
908
Rating
4.94
P
PrintablesLysander

PTFE Tool 4mm External Dia

6 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!

Downloads
5,376
Likes
204
Rating
4.92
P
Printablesdirtdigger

Calistar - Parametric, open source alternative to Califlower

2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…

Downloads
5,311
Likes
691
Rating
4.91
P
PrintablesRetroMaker

Snowglobe Votive Ornament - Xmas Town

This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…

Downloads
5,294
Likes
1,038
Rating
4.92
P
PrintablesHumble Studio

Dummy 13 (BETA & V1.0) Alternate Heads

Addition Heads for use with dummy 13.

Downloads
5,193
Likes
1,239
Rating
4.71
P
PrintablesJeff

Skull Ornament

Skull ornament Category: People

Downloads
5,083
Likes
913
Rating
4.98
P
PrintablesDominik

Flat to 3D Christmas Tree Ornaments

Simple and stylish way to add charm to your Christmas tree. This festive set includes four beautiful shapes: a Christmas tree 🎄, a star ⭐, and two snowflakes ❄. Each ornament prints completely flat as three simple pieces that you slide…

Downloads
5,039
Likes
1,259
Rating
4.93
P
PrintablesJosef Průša

Deadpool Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Downloads
4,911
Likes
1,117
Rating
4.79
P
Printables3dprints4life

Snowflake Ornament Collection - 18 Snowflakes (window or gift decoration - Christmas)

18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…

Downloads
4,770
Likes
602
Rating
4.92
P
Printablesh3li0

ornaments • xmas 2025

ornaments • xmas 2025 four new modern and minimalist bauble designs for this years xmas season dimensions in mm: ~ 76mm diameter important · make sure that: your filament is dry and calibrated so that it deals appropriately with printing…

Downloads
4,625
Likes
1,314
Rating
4.9
P
PrintablesJosef Průša

Stormtrooper Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Downloads
4,587
Likes
1,241
Rating
4.9
P
PrintablesSethR1223

Cyber Snowflake Christmas Ornament

Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…

Downloads
4,490
Likes
1,419
Rating
4.97
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
4,453
Likes
838
Rating
5
P
Printablesthiebes

Heart spinny fidget toy ornament for Valentine's Day, Christmas, etc.

Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…

Downloads
4,285
Likes
743
Rating
4.89
P
PrintablesOld Lady

Christmas Tags, Christmas Ornaments 2.0

Another variety of Christmas tags

Downloads
4,253
Likes
663
Rating
4.93
P
Printablesrav
Downloads
4,198
Likes
639
Rating
5
P
PrintablesJarvis

Spiral Christmas Ornament

Not to be Sold I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Simple Christmas Ornament. I printed a simple letter and hung it…

Downloads
4,169
Likes
806
Rating
4.88
P
Printablesunwohlpol

Ornate picture frame

I'm collecting old baroque picture frames for some years now to publish my photos in them (and to distract the viewers eye away from the amateurish photos to all the ornaments and shiny stuff). Now as I'm in posession of a 3d-printer (or…

Downloads
4,076
Likes
588
Rating
4.67

*Updated* Christmas Ornament Snitch Kit Card

UPDATE: Due to popular request, the Kit Card was updated in regards of tolerance (fit) and stability. For optimal fit I would recommend using a layer height of 0.2 mm. Christmas ornament version of the loved snitch card. Merry christmas!…

Downloads
4,076
Likes
1,512
Rating
4.76
P
PrintablesSeppo

Snowflake Christmas Ornament Christmas Tree XMAS decoration

This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…

Downloads
4,065
Likes
698
Rating
4.99
P
PrintablesPopandsicle

Christmas Tree Ornament Set Pt II: The New Batch (Vase Mode Prints)

To celebrate my 2nd Holiday season on Printables, I decided to add an additional 6 ornament designs to my collection of Vase Mode Christmas Tree Ornaments. I posted the original 6 last year, and they quickly became my most popular…

Downloads
3,955
Likes
954
Rating
4.98
P
Printablesrazandersen

Harry Potter ornaments / pendants

harry potter tags for Christmas, Pendants or keychains

Downloads
3,904
Likes
936
Rating
4.86
P
PrintablesMAKERTEAM®

Christmas Tree Ornament SPHERE (80mm round) with Cap (Weihnachtsbaumschmuck)

This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…

Downloads
3,879
Likes
904
Rating
5
P
PrintablesDeadMoon

Snowflake Wall Decor and Ornament Set

Celebrate winter with this detailed snowflake collection designed for both display and decorating. The set includes a large wall version, a small wall version, and a dedicated ornament version with a built in ring for hanging. The wall…

Downloads
3,850
Likes
685
Rating
5
P
PrintablesRonnyS

7" Touchscreen case for Raspberry Pi 4 + internal fan

Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…

Downloads
3,810
Likes
483
Rating
4.92
P
PrintablesJosef Průša

Jack Skellington Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Downloads
3,800
Likes
944
Rating
4.89
P
PrintablesBemko

Christmas tree spiral ornament with mount

I added a mount to hang it pointing down. I also resized the spiral to make it more sleek. I think it looks better this way and it is easier to print too. Looks best in silk or transparent filament. Ornament_thin_mount_v2.stl has a wider…

Downloads
3,709
Likes
944
Rating
4.85
P
PrintableshannesPrintable

Print in Place Collapsible / Self-Inflating Christmas Ornament

🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…

Downloads
3,695
Likes
820
Rating
4.17
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Downloads
3,645
Likes
766
Rating
4.93
P
PrintablesEmbraceNext

Christmas Ornament Candy Dish

I was asked to design a Christmas ornament candy dish. This is what I came up with. It came out way better than I ever thought it would have. It prints very well even without supports! I am even filling them with candy canes and other…

Downloads
3,607
Likes
957
Rating
4.96
P
PrintablesERAVIA

Christmas Bells | Christmas Ornaments

Print Instructions & Recommendations: No support or any other post processing is needed. Models can be printed with 1 or 2 Walls and 0% Infill . It is recommended to use 2 Walls for stability and quality aspects. Unless you are printing…

Downloads
3,566
Likes
715
Rating
5
P
PrintablesNakozen

Tornado GR4 Kit Card

The Panavia Tornado saw service in the RAF from 1979 right through to 2019 before it was totally phased out to make way for the Eurofighter Typhoon I grew up seeing this aircraft flying overhead in pairs and low through the Scottish…

Downloads
3,475
Likes
698
Rating
4.97
P
PrintablesThat_NASCAR_Guy

MACK Bulldog hood ornament

This was someone else design from 2018 ish but they removed it. I couldn't find it online so I found the file on my computer and posted it for others to use. Here is a link to a stand for it as well that someone else designed.…

Downloads
3,453
Likes
133
Rating
5
P
PrintablesArt G

Ornate Letter A Monogram

Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…

Downloads
3,407
Likes
468
Rating
4.96
P
PrintablesKitus3D

Hueforge Christmas Ornaments

There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…

Downloads
3,357
Likes
1,117
Rating
4.79
P
Printablesmaskedjoey

Unicorn pusheen cat ornament

This model will need support for the tail. And may need some build plate adhesion, because only a small area of the body and legs are touching. Made two versions, one is an ornament version and the other a non-ornament version.

Downloads
3,324
Likes
448
Rating
4.61

Milwaukee Packout Compact Organizer Internal Profile Blank

This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…

Downloads
3,149
Likes
469
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 61 - Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
3,096
Likes
730
Rating
4.98
P
PrintablesFilamentFever

Merry Christmas Ball Ornament

✨ Merry Christmas Ball Ornament Bring festive charm to your holiday décor with this elegant flat “Merry Christmas” ornament! Designed for easy 3D printing and quick customization, this minimalist yet eye-catching decoration is perfect for…

Downloads
3,021
Likes
511
Rating
4.9
P
Printables3DPrintBunny

Harry Potter ornament

Harry Potter ornament - great gift Stands about 18cm high Easy to print, no supports

Downloads
3,019
Likes
724
Rating
4.95
P
Printables3DPrintBunny

Hanging Lantern Christmas ornament

A screw together lantern bauble that will hold an led tealight. Can be hung on your Christmas tree or on my Display tree attached. Prints without supports

Downloads
3,019
Likes
935
Rating
4.85
P
PrintablesMaxT

Santa Sleigh in a bauble (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Downloads
3,018
Likes
435
Rating
4.76
P
PrintablesIconic FAB

Not a Key-Bak (alternative) mount for Stealth Press 1 / 1S (heat set insert press)

About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Stealth Press is a highly…

Downloads
2,979
Likes
331
Rating
4.98
P
PrintablesPopandsicle

LoZ: BotW Master Sword Alternative Pieces with Looser Fits

ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…

Downloads
2,972
Likes
790
Rating
4.93
P
PrintablesShpooople

Square Baroque Ornamental Picture Frame (20x20cm)

The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…

Downloads
2,891
Likes
574
Rating
4.93
P
PrintablesMaxT

Christmas Door Trim Corner 17 - Deer and Christmas Trees (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
2,880
Likes
658
Rating
4.91
P
PrintablesBest_codes

Christmas ornament

Just a simple 2023 snowflake ornament. Enjoy!

Downloads
2,848
Likes
304
Rating
5
P

Jack Skellington - The Nightmare Before Christmas - Ornament

Don't lose your head this holiday season. 💀 These print great without supports! More presents in store ;) ______________________ 19 days 'til Christmas!

Downloads
2,828
Likes
708
Rating
5
P
PrintablesBODY3D

Fidget Tornado

Support me on Patreon Follow me on Category: Other

Downloads
2,827
Likes
281
Rating
4.87
P
PrintablesBrunoCRO

Christmas tree hooks - ornament hooks

Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!

Downloads
2,774
Likes
650
Rating
4.95
P
PrintablesCalebTimoteo

Darth Vader & StormTrooper Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Downloads
2,759
Likes
801
Rating
4.94
P
Printablesplex41

Tornador vacuum cleaner connection

This is Tornador vacuum cleaner connection to suck up the dirt thrown up directly. The front neck is 12.5 degrees slanted and rotatable. V6 v12 is 15 degrees. you need only one of them. V6 12,5deg or V12 15deg The vacuum cleaner…

Downloads
2,737
Likes
248
Rating
5
P
PrintablesPeter Farell

Nativity Ornament with Star Hanger.

Nativity Ornament with Star Hanger.

Downloads
2,725
Likes
514
Rating
4.93
P
Printables3D MAGIC

Dwarf Christmas tree ornament

A classic, stylized appearance, featuring a tall, ribbed winter hat with a small pom-pom on top with a snowflake in its hands. Simple, elegant, modern.

Downloads
2,704
Likes
466
Rating
5
P
PrintablesArt G

Ornate Letter M Monogram

Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.

Downloads
2,703
Likes
344
Rating
4.89
P
PrintablesOld Lady

Christmas Tags/ Christmas Ornaments

Tag s to decorate the Christmas tree or gifts

Downloads
2,683
Likes
324
Rating
5
P
PrintablesMeister Edel

Screwdriver Ventilator & compressed air alternative Toroidal Design

You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…

Downloads
2,674
Likes
841
Rating
4.71
P
PrintablesAdeltne

Eternal Rose

This is a detailed 3D model of a rose, perfect as a decorative piece or a gift for special occasions like Valentine’s Day, Mother’s Day, or anniversaries. You can print the rose in two ways : Single-color version : Print the entire model…

Downloads
2,670
Likes
293
Rating
4.9

Christmas Ornament Collection 2022

In order to make the Star ornament, you'll need to print two Star Orn Bodies, four Star Orn Arms, and one Star Orn Top. In order to make the Snowflake ornament, you'll need to print two Snowflake Orn Bodies, six Snowflake Orn Arms…

Downloads
2,633
Likes
811
Rating
4.94
P
PrintablesMaxT

Christmas Deer and Christmas Trees in a bauble (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Downloads
2,631
Likes
368
Rating
4.95
P
PrintablesTim Hatch

Death Star Christmas Ornament with LED

I used two LED diodes and two 3032 battery containers to light it up from the inside. The trench also has notches so the light can come out should you want to add more leds to the inside. You can reopen it to change out batteries. things…

Downloads
2,612
Likes
1,154
Rating
4.92

Ornamental Pokemon - Mew

This is one of the models offered on my Patreon. Feel free to test out this model to see what kind of model you can get when you join today. All Patrons have access to EVERY model that has been released, no extra paywalls. I'd love to see…

Downloads
2,565
Likes
490
Rating
4.86
P
PrintablesCrazy3D

Snowglobe ornament with raindeer, christmas tree, snowman and empty for your design

Snowglobe ornament with raindeer, christmas tree, snowman and empty for your design If you like it --> press like it :-) Created a ornament for your christmas tree, which you can place at your fairylight and it will illuminate the scene…

Downloads
2,527
Likes
527
Rating
4.8
P
PrintablesJosef Průša

Cthulhu Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Downloads
2,464
Likes
655
Rating
4.96
P
PrintablesTs3D

International Women's Day / Valentine's Day Rose - 12

2d rose collection - https://www.printables.com/cs/@Ts3D/collections/1208891

Downloads
2,443
Likes
294
Rating
5

Bluey and Bingo (Regular, Holiday/red hat and Tree Ornament Versions)

This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS. Print notes When imported on cura the models are…

Downloads
2,429
Likes
303
Rating
4.71
P
PrintablesMagnavis

Ciri - Alternate Look - The Witcher 3

THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ - Twitter & Instagram --- If you would like to show some support for my files, you can do so here:…

Downloads
2,396
Likes
879
Rating
5
P
PrintablesGlennovitS 3D

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
2,395
Likes
500
Rating
4.86
P
PrintablesMarkDeco

Woven Christmas Ornament

⭐ Woven Christmas Ornament Beautiful woven-style Christmas ornament designed for clean, support-free 3D printing. Perfect for holiday decorating, gifts, or printing in multiple colors. Print settings: Layer height: 0.2 mm Material: PLA…

Downloads
2,386
Likes
429
Rating
4.67
P
PrintablesWube Software

Factorio Steel Furnace

Steel Furnace from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The furnace can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…

Downloads
2,359
Likes
271
Rating
5
P
PrintablesKT3Dprint

Lil mouse - Christmas ornament, easy print

This is number one out of three little mice figurines for the christmas tree. Having all three is perfect, if you really want to infest the christmas tree with cute little mice. Get the others here: Crawling mouse:…

Downloads
2,344
Likes
891
Rating
4.97
P
PrintablesWube Software

Factorio Stone Furnace

Stone Furnace from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The furnace can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…

Downloads
2,321
Likes
260
Rating
5
P
PrintablesRei Bau

Christmas tree angel ornament decor collection 2025

Christmas tree angel ornament decor collection 2025 This is ornament design for your Christmas tree. Design comes into two parts the ornament and hanging part that stick on the top. If you enjoy my content by me a coffee. Thank you for…

Downloads
2,318
Likes
429
Rating
4.84
P
PrintablesBest_codes

Snowflake Ornament

Just a simple snowflake for downloading and modifying and decorations.

Downloads
2,312
Likes
116
Rating
4.88
P
PrintablesJohination

Christmas Ornament Chrismas Tree / Weihnachtsdeko für Christbaum

change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER

Downloads
2,302
Likes
336
Rating
4.94
P
PrintablesMaxT

Christmas Door Trim Corner 62 - Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,296
Likes
490
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 19 - Candy Canes (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
2,285
Likes
563
Rating
4.95
P
PrintablesMaxT

Christmas Door Trim Corner 57 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,280
Likes
489
Rating
4.81