3,112 models
A rocket engine model created by our in-house designer Vlado Turek. It's printable completely without supports. If you own the Original Prusa MK4/MK3.9, you'll find pre-sliced version of this model on the USB stick. This model is also…
Design for bigger prints ( 1 meter tall rocket from a standard Prusa i3) : https://www.printables.com/model/467608-huge-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self…
Another variation of our rocket engine sample model. It's printable completely without supports. Both single color and dual color variants are available.
This is small fun model of rocket engine that propels an inflatable balloon. It has 3 nozzles that are in a helix shape and thus help stabilize the nominal trajectory. Baloon can get quite high, but it is prone to wind. Although this is…
A variation of our rocket engine sample model with added side nozzles. It's printable completely without supports. If you own the Original Prusa MK4S, CORE One, or CORE One L printer, you'll find pre-sliced version of this model on the…
Rocket Racoon Guardians of the Galaxy. Holding a Hand Grenade
This is a remix of RealAbsurdity's wonderful "Modular Snap-Fit Saturn V" rocket design from thingiverse, but I re-built it for printing on my Prusa MMU2S! The coloration is based on as many pictures of Apollo-era Saturn V as I could find,…
I printed this at .15 layer height but .20 should work, add supports to the wings and the main body may require supports for coin slot. For a two colour body add colour change at 110mm in your slicer. Low Poly Version can be found here. 🤗…
The two parts of the jetpack must be glued. Requires adapter (included) between grip and hand.
This project is a remix of the United Launch Alliance (ULA) upcoming Vulcan Centaur 561 rocket. The original rocket files can be found at…
Full Text: Rocket 2.0 Passthrough: Creativity in Full Thrust Introducing the new Rocket 2.0 Passthrough model, combining simplicity, functionality, and innovative passthrough design. This rocket opens up endless possibilities for vibrant…
Coin with a cartoon rocket engraved in it. Uses art from PublicDomainVectors.org . LogRocket uses a similar purple and white version of this vector. The source vector was uploaded to PublicDomainVectors on 2017-02-06, and LogRocket was…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I designed this based on the logo for the Society of Women in Space Exploration to support their mission. For best results, print in hot pink filament! https://twitter.com/SWISEofficial
The image compares the size to a track pad. As you can see, it is quite small. Supports are required. The stem might break off while removing supports, so be careful. If it does break, you can use a 3D pen to weld to the model.
Model of an Anti Tank Rocket. The model can be used in different versions by exchanging the removable end and front caps respectively for rocket components and launch flame. So the modes transport, target acquisition and launch mode can…
The flames are modeled with varying wall thickness, and printed with 15% Gyroid infill, with the intent to get a “flame effect” when lit from inside. When printed upside down, no supports are required. I used Prusa Orange PLA Prusament to…
Imagine a million years lost in space and time, after crashing through a vortex of loose change it has transformed my original creation into a stealth low poly rocket bank. Be warned it's a bit battle scarred and dented but still holds…
Want to travel the space? Just save your money and enjoy the ride before you grow up! Space for money? Checked! Hyperspace circuits? Checked! Quantum engine boost? Checked! Comfy chairs for the crew? Checked! On-board antigravity source?…
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
Tool for removal and installation of the AVCS intake cam sprockets . Perfect tool for cam seal renewal, cylinder head removal, or motor tear downs. I've had 3/8" and ½" drive holes to use with ratchet but ain't necessary. Compatible with:…
A very simple RS-25 Rocket Engine I made like 2 years ago. I don't care if you use it, just credit.
GENERAL: 3D file to protect your Eggs in the American Rocketry 2025 Challenge see The American Rocketry Challenge - World's Largest Student Rocket Contest . This year’s ARC challenge has 2 grade A large eggs horizontally mounted in the…
A stand for building a custom rocket or spacecraft design using Lego Technic connectors. Based on Smithsonian educational activity Build a Spacecraft: https://www.instructables.com/Design-a-Spacecraft/ See project file (.3mf) for…
This is a remix of a wonderful model. I made a vertical coin slot so I did not need any supports to print this beautiful model. I used PLA and a 0.4 nozzle with 0.2 layer hight. I also added text to the print to make it personal.
You need to hide stuff from your roommates hide the stuff in this or give this to a child to entertain them for hours
Hello there, please see my Multicolor Rocket, which can be used as a Salt Shaker STL contains two parts Top-part can be screwed on and Salt can be inserted whith the orange “flames” on the bottom you need to be a bit creative, I just…
Spare rocket for the toy https://www.amazon.de/dp/B0BSFVZ2P3?psc=1&ref=ppx_yo2ov_dt_b_product_details It is a rocket that can be launched from the Skies Jet, which appears in 'The Mighty Paw' movie. The original rocket is unfortunately…
This is a spin stabilized rocket. It also uses spin recovery, so no chute or streamer necessary. Using an A-10-OT motor will keep altitude down to less than about 80 meters. I printed this in PLA on the Prusa Mk3S+. Other materials like…
This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…
I fixed the part with small wood screws.
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
długo się drukuje i poczeba podpory obowiązkowe
This is a holder for a 500ml beer can with dimensions 66m perimeter and 168mm. Model is made with ideas of real space rockets but with a big circle window to see, what can is inside. There are printables file for MK4S. If you ask, I can…
100x160mm sign, advertising ACME Rocket Skates, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
This is Version II of the Rocket Launcher , with a much more reliable trigger mechanism which should stop any lockup for most people, and general smoothness of the action. Massive thank you to AKinferno for helping me with all the test…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I first posted this on Thingiverse on 1/23/2022. A couple of copies were posted here as original work (without attribution) and were taken down, so I've decided to also post my original design here. Print using 0.4mm line width and no…
These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the ‘boosters’. I've included the following STL models: Large Rocket (complete) Large Rocket (body…
The Marimo Labs Open Access Water Rocketry Project A full-bore soda/seltzer bottle rocket launcher system designed for easy assembly and universal compatibility. Designed in Cambridge, Massachusetts, USA Free forever, everywhere…
Meet Rocket Tab, a fun and functional soda can opener and lid that keeps bugs and bees out of your drink while you're outdoors — and seals things up if you're saving that fizz for later. The "PULL" tab design makes opening cans easier…
Some months ago, my brother and his wife had their third baby. Obviously, as the coolest uncle ever, I had to give a spectacular gift to the little guy. So, I thought hard. Both parents are science fiction nerds. My initial idea was a…
There are about 20 Rocket League cars missing (as of 1/23/2022). Some models either didn't export correctly or don't open in the first place. I cannot get the console exclusive cars either. I am currently working on trying to get more…
There are two versions, the original model ripped straight from the game, and the "Printable" version which is much easier to print. I added to the model using Windows 3D Builder so you can use the 3mf file to add more if you want, or…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a detailed model of a rocket ship…
The Kickstarter is up to 97 unique creatures and 6 unlocked Patreon bonus minis 😵 Final stretch...so exciting, so much more to unlock!…
This is a 1/10 scale model of the J2 rocket engine by Rocketdyne that powered Stage 2 and 3 of the Saturn V rocket. While the F1 engine was the workhorse of the missions and provided an unprecedented 1.5 million pounds of thrust each (7.5…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is an elegant, minimalist rocket ship…
Printed on Creality Ender 3 V2 0.20mm NORMAL SPEED 0.4mm nozzle Fill: 5% Supports: Yes (Only for SmallRocket.stl )
Need a looong space ride? Say no more and print one of these! rocket_v2 should be easier to print with FDM printers. Only the bottom part (the combustion conduct) needs supports. You can use the first one for your resin printer or if you…
This 9mm pitch roller chain prints up quickly (about 2.5 min/link) and assembles easily. Most importantly, the links are designed so that the tensile stress is aligned with the print lines (rather than across the print lines) for maximum…
My remix of the fennec model over on Thingiverse. This one has wheel pins and simple wheels that snap on. Works great in PLA. You can reduce the size down to about 50% before the details get too fuzzy.
Hier mein erster Versuch einer Spielzeugrakete. Empfehle die Raketenstützen mit Support zu unterlegen um den Halt zu gewährleisten. Layer High: 0.10 / 0.20mm Infill: Gyroid 10% Muss natürlich bei bedarf angepasst und Skaliert werden, das…
Just a simple rocket model inspired by those seen in cartoons. For those who may face a little trouble printing the one piece part, i've uploaded the top and bottom parts, so you can rotate the bottom 180º, print it normally without any…
Various wheels from Rocket League. These are a bit outdated and do not include most of the wheels that come from crates. Getting the game files takes a lot of time and I have not done it in a while. Some export weird and may not be…
I made this to fit the air chucks at the metal shop I worked at. Pete's remix might be better suited to normal air chucks. https://www.printables.com/model/1532145-air-chuck-rocket-14 If anyone is looking for an easy remix project, Dante…
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
For smaller prints use the previous version : https://www.printables.com/model/163971-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self assembling and self standing. This…
Another satisfying spiral fidget - This time in the shape of a rocket! Your Support is Appreciated! If you like this model, please like it, follow me here on Printables, and share a make of your print! If you would like to support my…
Print the rocket part with supports. Also, put your horizontal expansion in a negative value, if not the rocket won,t fit perfectly with the clouds.
This is a set of fins and nosecone to fit loosely on a 2L soda bottle that I designed for my son Harry for a school project They should fit loosely. use double stick tape to hold fins to the bottle and the nosecone should be loose to fall…
The easiest way to start camera scanning. Do you have boxes of old negatives that you've been wanting to preserve but never got around to it? Are you tired of outdated, slow flatbed film scanners that take hours to scan a few rolls of…
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ ---------------------------------------------------------------- 16-10-2024 small…
The Kickstarter is up to 97 unique creatures and 6 unlocked Patreon bonus minis 😵 Final stretch...so exciting, so much more to unlock!…
Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…
This is a static model of the German V2 Rocket from WWII. Printed as is, it sits at 600mm tall. Parts print in three separate sections. I will be doing a powered version of this model using D & E motors. This is in progress now. The fins…
Recreate the spaceX starship launch with this desk stomp rocket. With a good push I have managed to get the rocket up to 3 meters, how high can you go? ;) All parts printed in Bambu Basic PLA, when using different filament the tolerances…
🚀 Attach, aim, and upgrade your Mobile Exo Suit with this functional rocket launcher add-on! Perfect fit, no glue required. 🎯 Printing Instructions Print in PLA or PETG with 0.2 mm layer height and 3 walls. No supports, glue, or brim…
After printing and painting the rocket and crater, use a bit of wire to hold the rocket over your tea light at the right height (see picture). The rocket's back side pod is hollow to help with drilling a small hole to insert the wire.…
While there are several wall mounts for Shark stick vacuums, the Rocket Pro doesn't appear to be one of them. This vacuum has a thin hook behind the canister which is clearly meant as a mounting point and so from this I reverse-engineered…
A remix of "Fennec Rocket League" by Sedlacek_Jakub. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts :No Supports: Yes Resolution :0,10mm Infill: 15% Filament :Giantarm PLA white Category: Vehicles
This stomp rocket/glider combo has an angled launch tube, making it great for inter-cubicle warfare. Providing, of course, everyone is wearing safety glasses. Truth be told, the glider is a little on the heavy side, so don't expect long,…
First and foremost, I want to give a huge shout out to farscape1 for this incredible build. I remixed a few of the files in this print to add some detail as well as combine some of the more delicate pieces into a single print. Added: side…
I created a stand for my Logitech C920 that resembles The Rocket Side Spool mount that I am using. It slides into the left side rails of my Ender 3 V2 (should also fit Ender 3/Ender 3 Pro) and has a hole that allows you to screw a 1/4-20…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE ROCKET MARIO BROS KEYRING This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain is…
5 sprocket with various teeth number - module 3 (pitch 9.42mm) to be optionally used in combination with sprocketand pinion https://www.printables.com/model/1266062-rack-and-pinion-module-3 Printed with Flashforge Adventurer 5M Pro…
A model rocket kit for Estes BT-55 body tubes. Choose from 4 nose cones and 3 fin sets. Or take the solidworks files and make your own! I recommend using a cardboard body tube, but if you are determined to print your own or want to try a…
This is the flying scale version of the V2 Rocket previously published as a static model. The tail section now has mounts for the motor tube mounting rings of which you will need to print x2 of. The motor tube is a cardboard BT-50 tube…
UPDATE: Please check out the SATURN V - COLBY CRANE by ChristineZ_42 https://www.thingiverse.com/thing:4222791 for a highly detailed replacement for the gantry crane!! The Saturn V (spoken as "Saturn five") was an American human-rated…
My personal version easy to paint, modular, of Saturn V. Print as big as you want.
Dominus from Rocket League. I filled in the original model using 3D Builder to make it solid and much more printer-friendly. I also included the Stern wheels that will snap in to the axles, or you can use any of the other wheels on my…
The Kickstarter is up to 97 unique creatures and 6 unlocked Patreon bonus minis 😵 Final stretch...so exciting, so much more to unlock!…
Self modelled Octane, made easy to print. The body will require supports for the build plate only, and I recommend either a thin or variable layer height for the upper details. Glue will be required for attaching the spoiler.
Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…
inspired by https://www.thingiverse.com/thing:427789
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
something me and my friend wanted to print
A Rocket from the game Rust. Warning! Results with fitment of the pins and holes may vary with you're printer. If you want the best results you should cut the full size model yourself. Full version and a cut down version with pins.…
Made some rocket league trophies, decided to release them here. Enjoy!
Printer settings: layer height: 0.15 Infill: 50% to 100%
I printed with PLA and 0.16 layer. I cutted for 4 parts for minimize supports and for very good result. After that easy to print.
I have been having so much fun with the spiral twist fidgets recently, I thought I should design my own. Then I thought, I should make my logo (a rocket and profile icon) into the fidget. I was not disappointed. This thig is so fun. To…
This is a printable model rocket for use with Estes 1/8" rod launch pads. This rocket works with Estes C6-3, and C5-3 motors. The model includes the rocket base, motor cap, nose cone, and body tubes. There are two top tube files included,…
This model is compatible with the lego system.
Hey guys…it's been a while since I uploaded any new freebies! Here's one of our most popular oldie-but-goodies! Many (most) of our models are support-free for FDM and resin. Nothing to do but print and play! We do have FREQUENT…
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
![Futurama Space Ship - Piggy Bank Rocket [Futurama Inspired Cosmic Ship]](https://media.printables.com/media/prints/654736/images/9098547_fb814b0e-3ecf-4ca0-be08-6bf452b7e64c_5284d75e-103d-4256-ab0a-184357911a24/space_piggy.png)
