Search results: rolls

Sort order

457 models

P
Printablesapefred

toilet paper holder cloud 3 rolls

This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…

Downloads
771
Likes
124
Rating
4.82
P
PrintablesTeque5

Doggie Bag Dispenser (36 or 20 rolls)

I've seen other dog bag dispensers that hold like 5 rolls, but I have two german shepherds and I usually buy a box of 36. So I designed a holder that would actually fit a whole box worth. For the 36 bag design you'll need to print this…

Downloads
114
Likes
22
Rating
3
P
PrintablesHonzal

Rolls-Royce Silver Ghost Balloon 1910 kit

materiál PLA tryska 0,4 mm vrstvy 0,20 počet kusů naznačen v názvu souboru Soubory jsou seřazeny do složek podle barev, tolerance dílů umožňuje sesazení bez použití lepidla, ve složce " ostatní " jsou soubory pro variantu tisku. Další…

Downloads
98
Likes
15
Rating
5
P
PrintablesTeo_211

Rolls-Royce Spectre Wall Art

Wall Art silhouette model of the Rolls-Royce Spectre.Adjustable size. I accept model suggestions or ideas you might have

Downloads
87
Likes
25
Rating
5
P
PrintablesDirk Vranckaert

Kitchen Paper Roll Holder (for large rolls)

This kitchen paper roll holder has been designed for large rolls that I personally use in my garage. Rolls with a diameter of 30cm should easily fit! The frame includes two holes for mounting to wall with standard screws. For a full setup…

Downloads
75
Likes
7
Rating
0
P
PrintablesDonJanek

Chrysler LeBaron - Headlight-motor rolls

If the headlight-motor continues to run in the up or down position or if the headlight lids will not rise or seem to rise erratically, this could mean, that the rolls in the motor are history. For that case, you can repair that motor by…

Downloads
69
Likes
5
Rating
0
P
PrintablesJerr_074

Dice that always rolls six

In the Netherlands we have this saying: “You can't always roll a six". For when stuff isn't going as you wished. In dutch: “je kunt niet altijd zes gooien” So to prove that wrong I made this silly cube that has six indents on every…

Downloads
49
Likes
2
Rating
0
P
PrintablesHPC_Patrick

Roll holder for filament rolls for the (un)original Prusa box.

I have designed this reel holder to be as stable as possible. The holder was tested for 1kg castors, 2kg and 3.5kg castors. It has small bumps that hold the rolls inside the roll guide. The design is such that the filament cannot wrap…

Downloads
46
Likes
10
Rating
0
P
PrintablesAnthony

Zebra GK420D Spool adapter for Royal Mail P6709 thermal label rolls

A spool adapter to use the Royal Mail P6709 thermal labels inside the Zebra GK420D thermal printer machine. May work on similar machines/labels. Have a great day.

Downloads
23
Likes
4
Rating
0
P
Printablesczarnyjerem

Reduction sleeves for filaments on cardboard rolls

While printing for a long time, I noticed that the cardboard roll wears out, which creates dust, which is an undesirable phenomenon when the bed is closed. The sleeves effectively reduce this, so there is no dust at all.

Downloads
17
Likes
1
Rating
0
P
Printablesbuchnema

Heart Stamp Jig for Toilet Paper Rolls

While looking for a nice craft idea for Mother's Day, we came across the common method of stamping hearts with toilet paper rolls. We really liked the idea because, unlike bought or 3D-printed stamps, all the stamped hearts look a little…

Downloads
16
Likes
8
Rating
0
P
PrintablesVogMan

Vogland Castle Dice Tower – Support Free Easy Print for Epic Rolls!

Bring medieval flair and rolling power to your tabletop games! The Vogland Castle Dice Tower prints support-free and delivers epic rolls for Dungeons & Dragons, Pathfinder, and other RPG adventures. 🏰 Designed for fast, easy printing — no…

Downloads
5,583
Likes
1,819
Rating
4.84
P
PrintablesPatrik

Shaun the Sheep for 37mm toilet rolls

I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…

Downloads
3,841
Likes
1,289
Rating
4.84
P
PrintablesKynes_Peace

Tremorscale - Articulated (Elder Scrolls Online)

This is an articulated model I sculpted of the creature from The Elder Scrolls Online, Tremorscale. A duneripper boss from one of the dungeons in the game (Volenfell). Support me on Ko-Fi! https://ko-fi.com/zunasw Printed on an Ender 3…

Downloads
2,485
Likes
423
Rating
4.75
P
PrintablesSebastianDruckt

Paper towel holder for large workshop paper towel rolls

As the original model did not fit larger rolls i remixed it quick and dirty. Now rolls with a diameter of up to 240mm fit in the holder. This should be enough for the standard “blue workshop paper towel roll”. I only created on model. to…

Downloads
2,174
Likes
281
Rating
4.4
P
PrintablesVoxInaudita

Statue of Nocturnal from Elder Scrolls Online

This is a model taken from the Elder Scrolls Online with some smoothing applied. This model is available as one whole piece which is 170 mm high, or split into parts that assemble into a statue about 40 cm (15.8 inches) high. The statue…

Downloads
1,999
Likes
448
Rating
4.83
P
PrintablesPeter Farell

The Elder Scrolls V: Skyrim Emblem

The Elder Scrolls V: Skyrim Emblem *flat -→ self explanatory. note far right emblem.

Downloads
1,705
Likes
397
Rating
4.91
P
PrintablesFun King 3D

Lego MiniFigure Toilet Paper Holder For Larger Rolls

This is a remix of the Lego_man. Holder toilet paper by vvK187. We buy the extra large rolls of Quilted Northern (https://amzn.to/2VBXz7r) and they just would not fit on this. I scaled him to be a little bigger, then I carved out the…

Downloads
1,607
Likes
294
Rating
4.86
P
PrintablesDimmu_Ogir

Skyrim Logo/Emblem elder scrolls

Skyrim Logo. Raised. Whole without a broken piece

Downloads
1,204
Likes
109
Rating
5
P

Gravity Defying Ramp (Rolls UPHILL!)

The double cone object rolls UP the ramp due to their physical properties. To learn how this works, watch my YouTube video explaining everything here as I designed this for that video :) Please heart this design if you like it as it helps…

Downloads
1,127
Likes
238
Rating
4.7
P
PrintablesTaneli R

Kitchen roll holder for 2/4 rolls (foil, baking paper, etc.)

Kitchen roll holder for 50x50mm kitchen rolls, like aluminum foil, baking paper, etc. A version for 2 or 4 rolls available. The two-roll version can be printed with Prusa Mini. The outer dimensions are 245x60x205mm (4 roll version), or…

Downloads
952
Likes
144
Rating
5
P
PrintablesHerranz

IKEA 365+ 10,6l Drybox - 2 x 1Kg filaments rolls

A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…

Downloads
924
Likes
124
Rating
4.67
P
PrintablesJames_5789

Rolls Royce's Spirit of Ecstasy badge

Rolls Royce's spirit of ecstasy.

Downloads
828
Likes
32
Rating
5
P
Printables3D_Print_Alex

Müllbeutel Rollen Halter - Holder for Waste Bag Rolls

!! English version below !! ----------------------------------------------------------- Ich habe diese Halter erstellt, da ich nichts gefunden habe, das meinen Vorstellungen entspricht. Folgende Müllbeutel finden hier Platz: 15 Liter 35…

Downloads
818
Likes
192
Rating
5
P
Printablesjbot

IKEA Skadis Tape rolls Holder

UPDATE 2024-01-25 : Added versions with higher walls. They are redesigned from scratch because I lost access to my OnShape account, so there may be some little differences from old files. Tape rolls holder for IKEA Skadis board. Designed…

Downloads
727
Likes
141
Rating
5
P
PrintablesRVfan

QIDI Box adapter for filament rolls with less diameters like SUNLU rolls

This adapter is designed for the QIDI Box, which is a multi material system. Some filament spools—such as SUNLU rolls with a diameter of only ~195 mm—are too small to rest properly on the front and rear rollers. Instead, they sit on the…

Downloads
719
Likes
87
Rating
5
P
PrintablesAna

How big are your rolls? – smaller remix 35mm Wrapping Paper Cutter #11 blade

Made a smaller version of the wrapping paper cutter, the original one was comically large on my flimsy wrapping paper Should have but didn't fix the weak point in the print, maybe in the next iteration :P

Downloads
704
Likes
101
Rating
4.71
P
Printables3dgranddad

Rolls Royce Spirit of Ecstasy

This was a model I downloaded as an experiment in colouring PLA 3D prints. It was printed on a Kobra 2, using Sunlu black PLA. I wanted to try giving it a metallic sheen and I think I have managed it. It would probably look better with a…

Downloads
655
Likes
27
Rating
5
P
PrintablesFriedmutant

Elder Scrolls Betrayal of the Second Era Accessories

Accessories for Betrayal of the Second Era boardgame from Chip Theory Games. Mini Chip Organizer This is a drop in organizer to sort the mini chips into their three categories: Overland, Stats, and Skills. There is space for 16 additional…

Downloads
654
Likes
42
Rating
5
P
Printables64bitcube

Elder Scrolls Skyrim Keycaps

Title says most of it: Made some keycaps using the Skyrim map markers, and threw in the oblivion logo since I had a nice quality render of it. Be sure to use the ‘settlement’ as your home key! The logos are 1 mm raised, and I intend to…

Downloads
576
Likes
174
Rating
4
P
Printablesmnemic

Elder Scrolls Online - Pact Dragonclaw Circlet - Cosplay Crown

This is the Pact Dragonclaw Circlet from the game Elder Scrolls Online. https://elderscrolls.fandom.com/wiki/Pact\_Dragonclaw\_Circlet To be printed and worn on your head, or to decorate a shelf. It's designed to be printed without…

Downloads
567
Likes
155
Rating
0
P
PrintablesHextra

Elder Scrolls: Betrayal of the Second Era + Valenwood Insert [BOTSE]

This is an unofficial insert for Chip Theory Games' Elder Scrolls: Betrayal of the Second Era. I wanted to create something that would make setup and teardown as painless as possible while also allowing for modular setups based on your…

Downloads
520
Likes
67
Rating
5
P
PrintablesKynes_Peace

Elder Scrolls Online - TESOctober 2021 (8 models)

This are all the sculpts and models I made for TESOctober 2021, posted on my Twitter here: https://twitter.com/ZunaSW They are all using prompts from Zenimax Online, and basing them on their creatures, thus the creature concept credits go…

Downloads
500
Likes
67
Rating
4
P
PrintablesMark

Rolls Royce Coaster

Rolls Royce Coaster Designed in FreeCAD. Ender 3 v2, Cybridge PLA, 0.4mm nozzle, 0.2mm Layer height. Once the stl file is in the slicer I scaled down to 40%. Print in your preferred filament. Once printed you can paint to achieve whatever…

Downloads
450
Likes
31
Rating
5
P
PrintablesIbextronic

AMS Bambulab, adapter give weight and include desiccant for rolls.

Adapter to give an extra weight to the roll and partially solve the problem of the low weight of the rolls in the AMS. Sometimes, when the rolls weigh little when they are running out, in the process of loading and unloading the filament,…

Downloads
443
Likes
56
Rating
4.8
P
PrintablesHijinksensue

4x6 Label Printer Stand [for large label rolls]

Remixed this label printer stand to hold the LARGE label rolls I bought off Amazon . Intended for a Munbyn 4x6 label printer, but should work with Rollo and other brands. Added diagonal support to the corners, a lip around the back and…

Downloads
442
Likes
56
Rating
5

Rolls-Royce Phantom I year1927 Degigner Ed van der Heijden.

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Rolls-Royce Phantom I, produced in 1927, was a luxurious and iconic automobile of its time. Here's a brief overview: Introduction: The…

Downloads
437
Likes
71
Rating
4.67
P
PrintablesKynes_Peace

Elder Scrolls Online - TESOctober 2022 (10 models)

These are all the sculpts I made for TESOctober 2022, of which I posted their renders in my Twitter page here: https://twitter.com/ZunaSW They are all using the prompts Zenimax Online Studios put up. I based my sculpts on their creatures.

Downloads
429
Likes
60
Rating
0
P
PrintablesKynes_Peace

Elder Scrolls Online - TESOctober 2020 (3 models)

I made these three models for the TESOctober in the year 2020. It was all I did that year, and while they were not all the prompts, they were pretty neat to 3D print.

Downloads
405
Likes
103
Rating
4

Slide Illusion (Marble Rolls Up)

Its a cool little illusion that needs some supports for the ladder.

Downloads
396
Likes
30
Rating
5
P
Printableszenzmatz

Toilet Sheep for 45mm inner rolls

Remixed the "Shaun the Sheep Toilet Paper Roll Holder" for toilet paper inner rolls with a diameter of 45mm. I also changed the head for less material usage. You have to print 1x Head, 1x Body and 4x Legs. I printed the Body upright with…

Downloads
387
Likes
29
Rating
5
P
PrintablesTlangphoto

35mm film case- (holds 4 rolls)

This film case will hold 4 rolls of 35mm film with a tight fitting top that clicks into place. Print the top and bottom in separate colors for added creativity.

Downloads
385
Likes
51
Rating
5
P
PrintablesMacNeill

Grip and Rollstop for the Apple Pencil

I designed these to improve the grip and to keep the pencil from rolling. One in a triangular and the other in a more pencil like, hexagonal shape. Printed with flexible filament they fit quite good on the Apple Pencil. Update…

Downloads
331
Likes
52
Rating
4.67
P
PrintablesBazzar701

Tiny Rolls Royce Phantom - Mini Cars Series

Rolls Royce Phantom, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…

Downloads
319
Likes
64
Rating
5
P
PrintablesNC10

Trash Bag Holder Dispenser XL Plus for large 6"/150mm diameter trash bag rolls (SamsClub Hefty 33 Gal Rolls)

I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting…

Downloads
310
Likes
45
Rating
5
P
Printablesnkssbl

RollSafe | Dice Storage | magnetic and threaded version

Introducing the ultimate W20 dice storage solution - the RollSafe dice box! This 3D-printed box is not only functional, but also downright hilarious. Crafted to look exactly like a giant W20 dice, this box is sure to turn heads at your…

Downloads
301
Likes
91
Rating
4.75
P
PrintablesKynes_Peace

Elder Scrolls Online - Argonian Warrior

I made this 3D model in 2018, for a friend, of his own argonian character from elder scrolls online.

Downloads
299
Likes
59
Rating
0
P
PrintablesJosé Pedro

Rolls-Royce Phantom - Ultra-Luxury Sedan Model

Experience the pinnacle of automotive opulence with this 3D printable STL model of the Rolls-Royce Phantom. This ultra-luxury sedan model is perfect for automotive enthusiasts and collectors of the finest vehicles, showcasing unparalleled…

Downloads
297
Likes
38
Rating
5
P
Printableshsus

Trollskull Manor - Playable size (28mm)

TLDR: This is a playable sized Trollskull manor from the DnD campaign Waterdeep: Dragon Heist. Print one of everything, add some glue and magnets and you're good to go! Final result UPDATE : Initial update contained the wrong TSM_0_a…

Downloads
293
Likes
44
Rating
5
P
PrintablesColin

Sunlu Filadryer Humidity Reducer - Silica Gel Holder for Filament Rolls

Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…

Downloads
286
Likes
29
Rating
5
P
PrintablesStrankler

Cap for Lego MiniFigure Toilet Paper Holder For Larger Rolls

This is a adapted version of Thingiverse “Model Lego man cap (fitted)” from anynoob , to fit for Fun King 3D's Lego MiniFigure Toilet Paper Holder For Larger Rolls . I added custom supports in the *.3mf file. Version 1.0 - 24. Mar. 2023 /…

Downloads
280
Likes
55
Rating
5
P
PrintablesKynes_Peace

Elder Scrolls Online - Kaalgrontiid Bust

I made this Kaalgrontiid back in 2019, to try out my resin 3D printer. It is a dragon from The Elder Scrolls Online Elsweyr chapter.

Downloads
276
Likes
59
Rating
0
P
PrintablesTritschi

Cable Rolls and Dispenser (e.g. 26 AWG)

So I created a roll consisting of two halves (which differ from each other) and glued them together. With a cordless drill and some helping parts I could wind up the 10 meters of AWG 26 cable. A ØM8 screw and nut with washer serve as…

Downloads
269
Likes
129
Rating
5
P
PrintablesKynes_Peace

Elder Scrolls Online - Daedroth

I made this digital sculpt backn in 2018 when I was learning 3D. It is a daedroth from Elder Scrolls Online. It is actually a daedroth later on used in Beyond Skyrim Cyrodiil. I never got to print it, but I wanted to share it.

Downloads
254
Likes
49
Rating
0
P
PrintablesLarry12345

Pocket Sized Rolls Uphill Cross Shaped Illusion

This is an extremely cool, pocket-sized, and less-than-30-minute anti-gravity magic trick and fidget! It looks like it is rolling up the hill onto the center of the cross when it actually is downhill, not uphill! Just close one eye and…

Downloads
251
Likes
66
Rating
4.71
P
PrintablesAstupidmoose

Gridfinity -40x Mini Spool Swatch Rolls

I didn't feel like I needed the sealing box, but liked everything about this design, so I dropped the design into a 3x5 gridfinity drawer, while expanding the spool count from 27 to 40.

Downloads
248
Likes
56
Rating
5
P
PrintablesTubbybtch

2020 Christmas Tree Ornament Toilet Paper Rolls

In the USA, nothing epitomized 2020 like an irrational rush to buy toilet paper. Print instructions Works best with PLA or PetG white. This is designed to slice/print easily. Prints best with no brim.

Downloads
242
Likes
40
Rating
5
P
PrintablesJosé Pedro

Rolls-Royce Ghost 2021 - Luxury Sedan Model

Experience the epitome of automotive luxury with this 3D printable STL model of the Rolls-Royce Ghost 2021. This luxury sedan model is perfect for automotive enthusiasts and collectors of ultra-luxury vehicles, showcasing unparalleled…

Downloads
235
Likes
26
Rating
0
P
PrintablesAgronov

TOILET PAPER CLOUD - HOLDS 8 ROLLS

This Holder fits all the brands, large tp and small! I designed it to fit on an average print bet, there are two parts that connect with a Dove Tail joint. It can be on the wall with two options, I left two screw holes OR you can do like…

Downloads
233
Likes
35
Rating
5
P
PrintablesTlangphoto

120 film holder (holds 4 rolls)

This film holder safely stores 4 rolls with a secure top lid that snaps into place. Print the top and bottom section in different colors for added creativity.

Downloads
232
Likes
34
Rating
4.83
P
PrintablesKynes_Peace

Elder Scrolls Online - Kjalnar Tombskald

3D model I sculpted of Kjalnar Tombskald from Elder Scrolls Online, commission ordered by zbzszzzt123 on Reddit. The head doesn't have any detail, as the original commissioner already had one they were using.

Downloads
231
Likes
31
Rating
0
P
PrintablesKynes_Peace

Elder Scrolls Online - Enurach

I made this digital sculpt in 2021, for a prompt Zenimax Online Studios made in their twitter in which the community could create any creature based in the world of Elder Scrolls, that could fit in Oblivion. This is what I came up with.

Downloads
213
Likes
40
Rating
2
P
PrintablesLysandrek

Rolls Royce Logo

Voilà un logo Rolls Royce à imprimer en 3d, pour décoration 7cm de long, facile à imprimer

Downloads
208
Likes
7
Rating
0
P
PrintablesAMacG

Rolling grinder (Rollschleifer)

Rolling grinder a la Horl. Holder has angles for 15 and 20 degrees (afaik 15 is recommended for higher-quality knifes, 20 for softer steel). I bought discs with 400 and 1000 grit (one for getting the basig angle, the other for actual…

Downloads
200
Likes
67
Rating
4
P
PrintablesTlangphoto

"Twin Pro Pack" film holder- hold 10 rolls of film

Introducing the "Twin Pro pack" this bad boy holds 10 rolls of 120 film with the same snap top design of the original 4 pack. This new design is great for safely storing film in your fridge or freezer. Maybe you shoot obscene amounts of…

Downloads
192
Likes
30
Rating
4.5
P
PrintablesKynes_Peace

Elder Scrolls Online - Arana

I made this 3D model two years ago as I felt inspired by ZOS' new DLC Markarth for The Elder Scrolls Online. Arana is one of the main characters in that DLC, and I really liked her. I never got to print her, but I had the files ready, so…

Downloads
192
Likes
36
Rating
5
P
PrintablesKynes_Peace

Elder Scrolls Online - Banekin

A digital sculpt I made a while ago on 2021 for New Year for the community, never got to upload it, so here it is. I also never got to 3D print it, but the 3D model is fully prepared for 3D print.

Downloads
191
Likes
38
Rating
0
P
PrintablesHImeyomi

Branch Trolls

Funko Pop Trolls

Downloads
187
Likes
15
Rating
0
P
PrintablesPhylius

The Elder Scrolls V: Skyrim Iron dagger

It's just an iron dagger, but in 16 times the detail. Anyway… This model is based on its appearance in The Elder Scrolls V: Skyrim. 2 Versions: Simple template for your own sculpted design & detailed prop. Game accurate aspect ratio, but…

Downloads
187
Likes
39
Rating
5
P
PrintablesSam Hain

The Elder Scrolls Online Logo

The Elder Scrolls Online Logo. I will post pics when its done

Downloads
185
Likes
23
Rating
4.5
P
PrintablesJohn Doe

Creality Filament System (CFS) Rolls

This remix aims for a simple CFS-roll system. It won't win a price in mechanical engineering neither in design but its simple to make and requires no special parts. Also no TPU roll or rubber hose is necessary. Differences to original…

Downloads
183
Likes
49
Rating
4
P
Printablesrhynes

The Elder Scrolls V: Skyrim Map Marker

Objective map marker from the Elder Scrolls V: Skyrim made into a keyring Category: Accessories

Downloads
183
Likes
41
Rating
0
P
PrintablesSluggles

Kitchen paper roll holder (IKEA Skadis compatible) - REMIX for larger rolls

I extended the original holder to make it work with larger rolls. I use Costco's paper towels, and the original was just WAY too small. This one will work with all of the original mount pieces (that is why I am not including them in this…

Downloads
183
Likes
19
Rating
5
P
Printablesstenborg

SKADIS roll holder & hanger for tapes or wrapping paper - REMIX for larger rolls

Implemented simply by cutting the original in three parts in Prusaslicer and extending the middle part about 1cm. As a downside, the hexagons are now no longer perfectly symmetrical. 😢 Fits very well to the Ikea Skådis board - snug fit…

Downloads
180
Likes
32
Rating
5
P
PrintablesKlexer

Wall bracket for filament rolls / Wandhalterung für Filament Rollen

Einfach zu druckende Wandhalterung zur Aufbewahrung von Spulen. Der Durchmesser der Rundstäbe beträgt 20mm. Damit die Stäbe sich nicht zu sehr auseinander drücken, habe ich noch eine Stabi-Halterung eingefügt. Diese stört auch nicht wenn…

Downloads
177
Likes
7
Rating
0
P
Printablesm22

Coin Storage Rolls (Labeled)

Good for dimes, pennies, nickels, and quarters.

Downloads
176
Likes
13
Rating
0
P
PrintablesRyan Roehnelt

Spool holder for 1kg and 2kg Prusament filament rolls

The original Prusa version had a lot of bounce and eventually broke. I made some measurements of the broken part, drew it up, made it stronger. The second version ( v2 ) is a mirrored version of the original with a trimmed bottom tab…

Downloads
173
Likes
9
Rating
5
P
PrintablesMoto Freak

Quick Reload Paper Towel Holder: XL to fit huge rolls of paper towels

Mosewald14 did a great fixing the original model and all I did was extend it to fit the XL size (140mm/5.5 inch ) paper towels from Costco 3 walls or better Turn on and use variable layer height, if you don't want the huge layer stepping…

Downloads
171
Likes
19
Rating
5
P
PrintablesKynes_Peace

Elder Scrolls Online - Arcanist

3D model I sculpted of an Arcanist from The Elder Scrolls Online. Commissioned by zbzszzzt123.

Downloads
169
Likes
30
Rating
0
P
PrintablesRobert

Toiler paper holder - 3 rolls

For rolls with OD of ~ 120 mm and height of 100 mm.

Downloads
167
Likes
47
Rating
0
P
Printablesargylefox

Cave trolls (2 types)

Two cave trolls, from Pathfinder 2e. My party fought them after searching for missing people. The mystery deepens.

Downloads
165
Likes
29
Rating
0
P
PrintablesCal LF

Kids Binoculars From TP Rolls

10-6-21 Added remix credit to Slangfil since his design is similar and earlier dated. Unintentional remiss on my part. 9-22-21 Added a smoothed version for little hands. Kids pretend binoculars using toilet paper rolls. 42mm diameter…

Downloads
164
Likes
48
Rating
5
P
PrintablesFootlong

2.5 Inch Output Funnel for Rollsizer

Bench mountable funnel for directing brass output from Rollsizer into bucket using 2.5" flex hose (avail at RangePanda). I needed a rectangular funnel that I could attach to my bench that would catch brass ejected from my Rollsizer into a…

Downloads
164
Likes
16
Rating
0
P
PrintablesSvB

Voron Tap CNC All Metal (by Blurolls)

The printable files for the Voron Tap by Blurolls https://www.aliexpress.com/item/1005005707935827.html?spm=a2g0o.order_list.order_list_main.21.2c5318 Originally from Voron Designs https://github.com/VoronDesign/Voron-Tap

Downloads
163
Likes
22
Rating
0
P
PrintablesMH Performance

Rolls Royce sign for Jet Engine Stand Nameplate Plaque

Rolls Royce nameplate for easy attachment to the turbine stand. Color the plate in your slicer. You can find the stand here: Jet Engine Stand - Structural Design for working Jet Engine von flok | Kostenloses STL-Modell herunterladen |…

Downloads
160
Likes
45
Rating
5
P
PrintablesPowdered_Sugar

The Elder Scrolls V: Skyrim – The Adventure Game - Miniature Bases

These bases add a simple way to both determine and track which card a miniature references. Several roaming enemies in Skyrim - The Adventure Game can reference one of two cards. Due to this, you can't use just the miniature if there are…

Downloads
155
Likes
26
Rating
5
P
Printablesandrewtch

Toilet paper shelf (modular, 3 or 5 rolls in a row)

The model is pretty straightforward - print either 3 interlocking parts or all 5, which gives you 15 or 6 rolls of storage accordingly. Fits for rolls up to 130mm in diameter and 100 mm in height (normal EU size), Fusion 360 file…

Downloads
152
Likes
51
Rating
0
P
PrintablesNathan S

Rolls Royce Logo

For my 8th logo..... THE ROLLS ROYCE LOGO!

Downloads
151
Likes
10
Rating
0
P
PrintablesvmLOGIC

Toilettenpapierhalter mit Reserverollen / toilet paper holder with spare rolls

Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…

Downloads
150
Likes
49
Rating
0
P
PrintablesmotivierteSocke

Simple Toiletpaper Holder for 3 rolls

Easy to print, may have to be rotated to fit on the printbed. It is supposed to be used with standard rolls. Extra large ones might not fit. Fits any mk3-sized printers. I mounted mine with 2 short stripes of double sided tape. To speed…

Downloads
149
Likes
20
Rating
0
P
PrintablesFriedmutant

Elder Scrolls Betrayal of the Second Era Region Organizer

About Organize all the Encounter, Delve, Specials, and Guild cards plus their respective chips into boxes specific to each region. These were designed in the style that you see with board game insert master js500 and Hextra . I have…

Downloads
145
Likes
15
Rating
0
P
PrintablesSpinodal_Zeugma

Elder Scrolls - Betrayal of the Second Era: Skyshard Token

This is a skyshard token for the board game Elder Scrolls: Betrayal of the Second Era. Skyshards are collected during Delves, and accumulated in the game as a stack of cards. These skyshard tokens can be collected instead, and can also be…

Downloads
145
Likes
20
Rating
0
P
PrintablesDrHellbenders

Gridfinity Niimbot D11 Label Printer Bin & Spare Label Rolls (3x4x6)

This is a 3x4x6u Gridfinity Bin for a Niimbot D11 Label Printer and three spare label rolls. Also, it's my first model... please be gentle! This remixes the Plain Bin (3x4x6) from @KyleWarren (my absolute favorite Gridfinity bins to…

Downloads
141
Likes
29
Rating
5
P
PrintablesGrzegorz

Simple Filament Adapter for JAYO Cardboard Filament Rolls for use in Bambu Lab AMS, P1P/X1C

Print 2x Diameter outside 199 mm (For AMS up to 200 mm) Diameter inside 54,3 mm Depth adapter 29 mm Width with JAYO Spool approx. 63 mm (For AMS up to 68-70 mm) Print it with 15% gyroid infill or without infill Approx. 45 g filament for…

Downloads
136
Likes
11
Rating
5
P
PrintablesDavid S

Rolls-Royce Logo

Introducing my 9th logo, the Rolls-Royce Logo!

Downloads
130
Likes
6
Rating
0
P
PrintablesPhylius

Elder Scrolls Online - Runestone

Very simple runestone made for miniatures. I suggest to use Filament printer and slap some modelling textures like Citadel Stirland Mud / Astrogranite. Don't forget to add moss effects. If you have any suggestions, let me know. I can do…

Downloads
130
Likes
37
Rating
0
P

WW1 Rolls-Royce Armored Car

WW1 Rolls-Royce Armored Car. I scaled this to fit the WW1 British army toys I have created. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D prints of this model for as long as your subscription remains…

Downloads
129
Likes
8
Rating
5
P
PrintablesBignozz

Toilet paper holder for long rolls

This is a very basic toilet paper holder that you can stick to the wall of your bathroom using double-sided tape. Very easy to print, use the default orientation of the STL file, around 0.2mm layer height, and that's it! I printed with…

Downloads
126
Likes
8
Rating
5
P
PrintablesModel Magic

Classic Cars - 1960 Rolls-Royce Silver Cloud II Saloon

Classic Cars - 1960 Rolls-Royce Silver Cloud II Saloon 3D printable model.

Downloads
125
Likes
17
Rating
0