Screw Assembly Tarp Grommet
A 3D Printed Grommet that works.
- Downloads
- 1,019
- Likes
- 243
- Rating
- 4.94
916 models
A 3D Printed Grommet that works.
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
The visible hole in the back of my entertainment unit was distracting when watching television so I wanted a way to block it off while still letting the cables through. While the entertainment unit came with a grommet it had no shroud and…
Desk grommets are a simple and inexpensive way to keep wires from cluttering your work surface. The flexible grommet option has a slit design to allow for even easier cable routing in different directions.
Simple desk grommet for a ø60 mm hole, covers ø75 mm in total ø64 mm hole, covers ø79 mm in total, table top thickness 37.5 mm ø73 mm hole, covers ø88 mm in total Lid snaps into insert so it doesn't come loose. If you need another…
I needed a cable grommet for my Ikea Platsa closet, where I have my printer, and all the other grommets I could find where either impossible to get to fit right or too large. So I made my own. It is made with a 30mm inside hole diameter,…
Cable grommet for your desktop (designed for approximately 22mm thickness), 3 different insert discs with slots for 2 keystone modules. Discs are designed with a small interference with the main body of the grommet to make them motionless…
Designed to lock and seal around a 12mm diameter by 8mm (max) deep hole while passing though a 4mm diameter (eg. USB) cable. I use this to power my dry box's wifi connected hygrometer.
I printed it in PETG on my Prusa Mini+ upright with 20% infill (it's a long print so I don't want it to break), with 0.2mm layer height, and supports enabled everywhere. Having the lip at the top to keep it in the grommet creates quite a…
I couldn't find a cable grommet that I liked online, so I built this. This grommet fully covers both the top and bottom of the hole, so there's no exposed edging of the board it is mounted into. The pieces screw together for a tight fit,…
This is a grommet pencil cup for a desk top. It fits 80mm / 3.15" grommets The total diameter (with the lip on which it rests) is 90mm It is 90mm deep from the underlip to the bottom. Printed at 0.2mm layer height & 15% infill using PETG.
For the hole 28 mm and hose 1". Printing from ASA or PETG. Variable layer height (for the thread 0,10-015 mm).
Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.
Tired of cable clutter on your new desk? This 3D-printed grommet is perfect for organizing your workspace! Designed for IKEA EKBACKEN countertops but it should fit other countertops (even if with a couple of adjustments), it features a…
This grommet is used to fit holes with a diameter of 65 - 70 mm. No supports needed!!!!
Plugs for the MMU Grommet for the Original Prusa Enclosure. Please note, this is a press fit. It may take a little force to get it in and out of the MMU Grommet. 5 Variations so far: Solid plug Plug with USB cable cutouts top and bottom…
This is a grommet hub holder for a desk top. It fits 80mm / 3.15" grommets, and holds the following UGreen USB hub : Printed at 0.2mm layer height & 15% infill using PETG.
This is a super simple grommet I pulled together when building my home network cabinet. Simply cut a 2" hole in your cabinet and screw this bad boy down in it. Voila!
Grommet with tapered bore to fit Jiusion USB microscope from Amazon. Intended to relieve focused pressure on microscope from two set screws. Improves stability during focusing.
A replacement grommet/eyelet reinforcement for shower curtains. Fits in the curtain's reinforced eyelet and connect directly to standard curtain track rollers/runners. Quick fix for ripped or damaged curtain rings. Material: PLA, you’d be…
English below. Versehentlich hatten wir das Maschinchen auf eine heiße Herdplatte gestellt, und der Boden ist verschmolzen. Der Ersatz funktioniert wie das Original. Leider ist das Lösen der drei Schrauben schwierig, weil der Kopf eine…
Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV
Cable grommet to prevent your USB cable from slipping out of a management hole. I use this to keep my USB cables accessible through a port on my Uplift desk without worrying about them falling back through the hole.
Achtung : Hier geht um arbeiten am 230 V Netz. Diese Anleitung ist nur für Personen gedacht, die ihre Handlungen selbst beurteilen und verantworten können. Arbeiten an elektrischen Geräten und Installationen können gefährlich sein und…
Grommet for the linkage between the carburetor and transmission kick down lever.
A cable grommet that can be used to cover holes drilled with a hole saw to pass cables through it. As it is parametric, even if your desired size is not available, you can just change the parameters to fit your hole diameter and depth…
The design consists of three parts : BASE – outer diameter of 60 mm , mounted in the table and holds the insert securely INSERT – snaps into the base and can rotate 360° , allowing flexible cable positioning BRISTLES – clips into the…
Set of threaded grommets for hanging the curtain. With these grommets I was able to make wardrobe curtains that cover coats and shirts. You don't need any other tools except small scissors (and of course a 3d printer). Variants: The…
In my experience cable grommets are expensive, hard to find, and never quite the right size, shape, or color for my needs. That means they're a nearly perfect use-case for 3D printing, because you can print the exact number, size, and…
I was tired of cable grommets for desks that always came loose. This is a locking grommet. Use a 1 ¾" hole saw to create the hole. This will work for desktops up to 0.75" thick. This is my first ever model posting of a 3D model, so if you…
Update 02/12/2021 I improved the model to be more robust and to be easier to customize. Thanks to the user nicktalavera for his ideas on this! Lid added! I also included a few prerendered STLs ready to be printed if you have an Ikea LACK…
I bought a Sovol filament dryer. It comes with plastic grommets, but you can't feed a PTFE tube through them. So I drew up a grommet, that fits a PTFE tube, so I can print directly from the box. I printed it using PLA and a 0.6 mm nozzle.…
English Description of the 3D-Printed Desk Cable Pass-through: Purpose and Hole Diameter: The cable pass-through is designed to route cables neatly through an 80 mm hole diameter in desks, shelves, or work surfaces. Modular Design: The…
This small grommet allows you to use a presta valve in a Schrader valve hole without cutting or herniating the stem. I use Schrader-ready rims on all our touring bicycles because in the middle of nowhere, you never know what kind of tube…
A simple 2 piece grommet to neatly guide the power cable of the Prusa MK3S through the backplate of an IKEA PLATSA closet enclosure. Or any backplate that is 3mm thick. The diameter to drill in the backplate is 30mm. Inner diameter of the…
2 parts desk grommet. Diameter of the desk hole is cca 44.5 mm. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 10% Notes: Material PLA Category: 3D Printing
These are a couple of grommets I made for my printer enclosure. I wanted a good way to feed the power cable and PTFE tube into the enclosure without having a hole that lets a lot of heat out. I printed mine in ninjaflex TPU (85A) but I'd…
Grommets! A few weeks ago(at the time of writing this) a grommet separated and came off my keychain. I searched far and wide for an STL because I don't want to buy a pack of 30 grommets and tools to set them just to fix this one old…
A grommet for feeding the starlink wire through a wall. There is a hard plastic option and a soft one.
Desk Cable Grommet (60mm) This is a desk cable grommet used for managing cables and wires. With a diameter of 60 mm , it's a standard size for most desks. It consists of two parts: an outer ring that fits into the desk, and a rotatable…
Replace the rubber grommet with a solid plate with a pass through for aio tubes. Print face down no supports
Best if there are a couple of supports on the inside of the bolt section as the overhangs are a little more than what my printer could handle. Parameters start on line 438 When testing, use a small $fn such as 8. Using $fn = 512 took…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
Sovol SH01 Filament Dryer PTFE Grommet The available grommets that I found did not line the entire filament path with PTFE tube so I created two options to solve this (see pictures for cross section): “Normal” - This was the original…
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
I got a new Steelcase Ology desktop with pre-drilled, 2 inch holes for cable management. Rather than pay $7 each for these at the home stores, designed one and printed. I printed mine in PLA on a Bambu Lab X1C with standard slicer…
A way to hide Ethernet (or any other cable) behind dry wall. This is for a 25mm hole saw & can be adjusted by changing the value of OD. Note that OD is the diameter without the size screw thread. Wider gap between threads for harder…
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
If you build a 3D printing enclosure using the ikea lack table or any other surface of about 50mm in thickness, you will need to feed filament using a grommet. I found the ones already available were narrow tubes and provided no strain…
Description Openscad (https://openscad.org/) source code for creating 3D models of grommets that can be customised. The aperture, cable size, length, grips and other settings may be adjusted. The cable hole may be circular or slotted.…
For those who want to cover a frayed, drilled hole in their desk. Diameters are according to holes drilled by means of saw rims with standard sizes of Ø 25 mm, 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 63 mm. The desk grommet/hole cover provides…
The inside diameter of the grommet is 2.5". The hole on the cover plate is 1" diameter. Supports needed on the grommet to support the chamfered edge and inside tabs as well as on the cover plate to support the locking tabs. Print Settings…
OpenScad script for a “universal” grommet Use the OpenScad customizer for easiest configuration. Specify hole diameter, thickness, number of sides, rounding curvatures and membrane seal type One or two seals. Slice with knife or use the…
What you need electric drill 80mm holesaw Dimensions Diameter: 80mm Height: 50mm Material Material: PLA/PETG Layer height: 0,2mm Support: no Brim: optional Instructions Print the shell, it fits all inserts Drill a 80mm hole to your desk /…
A grommet to improve the appearance of the entrance of cables being passed behind the wall. For 1.5" hole and .5" cable cutout.
I was adding LED lighting to my IKEA Lack Enclosure and wanted a clean way to pass the cable outside the enclosure. I created this cable management grommet for this purpose. The grommet will fit into a 1/2 inch hole in the enclosure and…
This is the grommet required when replacing the BMW badge . Just take the old grommets out and replace them with these printed ones. Keep in mind the grommets will have to be printed in a flexible filament . BMW Badges: BMW Badge 78mm BMW…
Fill the gap between the top cover and tubes, don't have to unload
I found other models of desk cable grommets, but none that I liked were for a 76mm hole saw (which is a standard size included in many cheaper hole saw sets in the UK). So I modelled this one while making new desks for our children. You…
Print with ABS or other high temp material. The grommet just friction fits into place. Sand paper or printing at 99% or 101% might be need.
This TPU grommet is designed for holes with a diamter of 31.5mm (though it might also work on 31-32mm holes, didn't try this) with a sheet thickness of 3mm. I used this grommet for the back panel of my Ikea LACK enclosure. The grommet has…
printed in TPU, the softer the better, ninjaflex is a good choice, i did make the gormmets pretty “thick” its still not %100 but its pretty damn close
Strain relief cable grommet for 7mm cable, 14mm/15.9mm panel cutout. Modeled After Essentra SRB-R-3 PDF Datasheet Print Settings Printer: Cetus3D Rafts: Doesn't Matter Supports: Yes Resolution: 0.15mm Infill: 80% Filament: FormFutura…
Grommet with a ball joint for routing speaker cables from inside the wall simply cut a 25x20mm hole in the wall and force grommet to the wall till flush. Ball can be inserted to joint with slight force Printed with supports
There are already some cool designs out there, but I missed some features like a bottom cover, a clip to keep the upper disk in position, and a slim design. So, I created my own design to suit my needs and made it customizable in the…
Print this in a FLEX/TPU material. I used Overture TPU. This will very snugly fit a 13/16 hole and hold the cable from moving so make sure to put some silicone caulk behind it and get your cable situated before pushing it in.
This grommet is similar to the one I've uploaded previously, but this version has flexible flaps to close off the grommet opening as much as possible. Because of these flaps, the grommet can be printed without support material. Support If…
Most of the users have already noticed... Since the PTFE Tubes move through the holes in the top cover and the top-cover is harder and thin, they are being grinded. These grommits are designed to keep the PTFE tubes movable, but will stop…
Major issue that comes up frequently in later model Australian Ford territory and falcons is the degradation of the bushing or grommet around the transmission selector arm. These will fall apart at the most inconvenient time possible -…
Easy design to cover up desk holes, measuring 54 mm (2.13 inches) in diameter. Included are the original inventor files for easy customization.
This is a cable grommet designed to overcome the difficulty to use grommets on premade cables. This model is scalable, but if you drill a hole just big enough for a rj45 connector to fit through, this can be installed after the cable is…
This is a remix of an original design created by "Verbs" that is posted at: https://www.printables.com/model/59157-starlink-dish-cable-grommet The original designer deserves all the credit for this very functional item - the only…
I needed a wire grommet to protect a small DC Power port cable that needed to come through my Sheetmetal backboard to my LED Worklights on my workbench, so this was born. Originally designed in Inventor. I exported it in STEP and STL in…
I always knew this was a risk with the Creality Space Pi Dryer, but I had just been rolling the dice. Well, it inevitably happened. The PTFE tube got sucked into the dryer and wrapped around the spool. Caused a print to fail. Designed…
print in TPU for hole diameter = 8mm / 10mm / 12mm / 14mm Category: Other
Grommet used in the inside door handle and locking mechanism of many 90's BMW cars. The factory made them of some cheap plastic which yellows and falls apart over time so I came up with these replacements. Printing Notes Print in TPU or…
Holes drilled in plywood, MDF or chipboard can have unpleasant edges. This grommet is easy to apply and is the finishing touch to your work. The two parts are identical and fit into each other along a faint spiral. Once pressed together…
This is a TPU grommet that slots in the frame of a SpeedyBee Master 5 HD to hold the XT60 lead securely. It also acts as a strain relief for the wires and the ESC. I had issues using the XT60 panel mount connector on the frame and been…
Brush Cable Grommet for AD5X Flexible brush-style cable entry for heated bed wiring — clean, durable, and easy to install. This model is designed to guide heated bed cables through the printer enclosure panel. It helps prevent cable…
I designed this to pass cables through the top of my desk. I printed it with a .6 nozzle at a .3 layer height. This should be a friction fit, if it is too loose I added a small amount of electrical tape to increase the diameter.
This design is made for a square hole that is 88x88 mm The hinge is working with two M3 countersink screws ( the screws don't go into the wood), If fits nicely but you can add silicone or glue between the desk and grommet. Included is…
Simple drywall grommets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy!
While using the original model, the parts always fell apart when my cables would move slightly, so I designed this little press-fitted cap to fix this problem. The whole inner assembly could still leave the outer ring at that point, so a…
I had promised some time ago that i would post my not-keyboard stuff...and as i dig back through my files I'm occasionally finding suitable things that aren't one-off ridiculous widgets that apply only to the silly problems i make for…
Made a new desk for my home office so needed a desk grommet for the holes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Sunlu PLA Red Category: Office
For details please see the original model @ https://www.printables.com/model/Parametric-Cable-Grommet Added a top disk stopper as I needed to use this in vertical orientation. Just use any contact adhesive (glue) to secure it to the top…
PRINT 2X OF THE PART (for each side of the wall, 4 total) Drill a 1/2 inch hole to fit the ethernet connector, then add some superglue to the edges of both pieces. Slide over your standard round ethernet cord.
A variety of some flexible TPU grommets I've made for my S13 240sx. The “FRONT…” grommets are for the round holes under the headlights into the engine bay. The “OVAL…” grommets are for the front sides of the engine bay. The “TRIANGLE…”…
Update: Added a split version, to aid in making it easier to install. (This version may even work with hard plastics such as PETG and ASA. I can not confirm this myself) Once the rod is inserted, it should stay in place just fine. TPU is…
The grommet is for pegboards with 1/4" holes where the 3mm thick hooks are too loose. The hooks fall out when you remove tools and items on them. They always seem to fall in the most difficult place to retrieve them I bought a 8' x 4'…
Summary Original Model from https://www.thingiverse.com/thing:5745129 Add a waste bin or cardboard box underneath the grommet for large volume collection of waste filament. Changes made: Reduced wall profiles Converted into a slide…
Customizable OpenSCAD grommet. Fits about 2-3 wide cables
Grommet 16mm (16,35) printed in TPU for Ratrig V-core 3, mounts on electronic panel to protect the cables from heated bed. Made for a 4mm thick panel but probaly works on 3-5mm. OD: 16,35mm ID: 10,35mm
This is a simple grommet to protect wires and hoses as they pass through a hole. It is fully parametric can be resized to meet any size, depth, or hole requirement in seconds. Edit the Attached Fusion archive file to adjust parameters.…
For the hole 26 mm and hose 3/4"
For reasons not yet known to mankind, the Plus 4 eats up the original grommets pretty fast. I didn't want to leave the area open, so I designed and printed new ones. Printed from TPU, good luck eating these up, +4! PRINTING INSTRUCTIONS:…
This is a model of hard drive mounting grommet commonly used in many HP desktops, both Elitedesks and Prodesks. Why buy them when you can print them! Printing Instructions: Print 4x grommets for each hard drive 0.2 layer height 20% infill…
Needed a replacement grommet for my 2005 Ford Focus. This one was almost exact, so with some minor changes this fit perfectly. You may need to file the nodule off the prop rod to make it fit, or file the grommet slightly so it can slide…
A simple, easy to print cable grommet, meant for European standard (metric system, plywood standard thickness) The mounting holes are meant for M3 Allen head bolts The mounting holes are on a circle of 56mm diameter, 120 degrees angle…