Search results: saddle

Sort order

528 models

P
PrintablesHedo3D

Schleich Horse Club - saddle holder

saddle holder for Schleich Horse Club, easy to print, easy to glue the gcode and 3mf file includes manual paint-on seams for (hopefully) optimal printing my other parts for schleich horse club:…

Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant

Downloads
1,498
Likes
212
Rating
5
P
Printablesbjamdesign

Bike - Ergon Under-Saddle AirTag Holder

Apple AirTag mount specifically for the Ergon QuickClick supported saddle. Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm. Installation Do NOT over tighten bolt and risk cracking…

Print approx. €1.64–€2.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
42
Rating
5
P
Printablesvandragon_de

Simplified saddle tank locomotive print in place

Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…

Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
30
Rating
0
P
Printablesdrew.brashler

Garmin Varia Seat Mount for Saddle Bag

My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
15
Rating
5
P
PrintablesTom Vít

Bike Light Saddle Mount Remix with Zip Ties and Smaller Interlock

Remix of https://www.thingiverse.com/thing:857803 by @abuharsky. Added two holes for zip ties (as you want to have the light on the way home) and with smaller interlock for common LED lights with bottom stop. – Very handy solution when…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
16
Rating
0
P
PrintablesAinon3Dtisk

Saddled Llama

Hello, Welcome to my profile, full of models and miniatures :-) I have a Saddled Llama for you for diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…

Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
13
Rating
5
P
Printableskoos42

Saddle rail mount for Cygolite Hotrod bike light

Zip ties hold this mount to the rails of your saddle while your Cygolite Hotrod, or similar, straps around the descending mounting position. A bump around the base retains the light incase of bumps shaking the light down. This is made for…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
1
Rating
0

Duvlan Keaton ergometer saddle adapter

The ordinary home trainers usually do not use standard bicycle saddles as known from outdoors. That is great disadvantage and literally “a pain in …”. My second generation of the adapter is a blend of 3d printed adapter frame which is…

Print approx. €7.86–€9.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
1
Rating
0
P
PrintablesKarolis

SYNCROS accessories mounting bracket for PRO saddles

Bracket to use Syncros accessories with PRO saddles. Every Syncros accessory mounts perfectly and holds strong. Originally it was designed for PRO Stealth saddle, but should fit every other PRO saddle. Printing settings: Filament: PETG,…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
2
Rating
0
P
PrintablesIBI Productions

AirTag bike saddle mount

This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…

Downloads
2,381
Likes
447
Rating
4.83
P
PrintablesSovey

Saddle Ruler Square with marking holes for woodworking inches

This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…

Downloads
1,970
Likes
701
Rating
5
P
PrintablesTheroux

Shotgun Shell Holder / Side saddle (12 & 20 Gauge)

Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…

Downloads
1,874
Likes
217
Rating
5
P
Printablescmh

Bicycle saddle height measurement tool - "80mm point"

Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…

Downloads
1,834
Likes
152
Rating
5
P
Printablestyler

Cable Tie Saddle Mount

Print sideways (current rotation) with no supports. These mounts are designed to mount cables, devices, etc to a wall using nylon cable ties. Screw the mount to the wall through the middle, pass the strap through the slots on both sides,…

Downloads
1,726
Likes
142
Rating
4.96
P
PrintablesSovey

Saddle Ruler Square with Metric marking holes for woodworking

This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…

Downloads
1,402
Likes
457
Rating
4.86
P
PrintablesMižufko

Garmin Varia Radar - Saddle Mount V2

Garmin Varia Radar - Bicycle Saddle Mount - also available for similar light versions The possibility of securing with zip ties - adapted for the original garmin holder Minimal supports Fast and easy print perfect snug fit Double…

Downloads
1,245
Likes
102
Rating
4.88
P
PrintablesHandsomeGreg

Saddle Hunting Platform Hook

A Molle hook to hang your platform from your saddle while climbing.

Downloads
1,057
Likes
61
Rating
0
P
PrintablesOdd Inventor

Horse Saddle (Easier Print)

If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…

Downloads
904
Likes
55
Rating
0

Horse with saddle

Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…

Downloads
903
Likes
89
Rating
5
P
PrintablesTransmitt0r

Airtag bicycle hidden saddle holder

Hidden Airtag Saddle Holder This is a handy holder that keeps your airtag hidden and safely attached to your bicycle. This is not a clip-on to make it harder to remove, instead the two halves are held together with four screws. The bottom…

Downloads
878
Likes
196
Rating
5
P
PrintablesTheroux

Angled shotgun shell holder / side saddle (12 Gauge)

Special thanks to @sugarballs for the Idea! Summary: There are various version of this angled (15°) shotgun shell holder / side saddle available. On the uploaded picture (Maverick 88) I used the 12G_5pcs_25mm_angled_velcro version. As…

Downloads
754
Likes
125
Rating
5
P
PrintablesOdd Inventor

Horse Saddle (Accurate)

Created by Aileen for a project of mine. Releasing as open source with permission of the author. Find her and more of her work here: Fiverr ArtStation - Aileen Z If you're enjoying models like this, please consider supporting us on…

Downloads
715
Likes
48
Rating
0
P
Printablesrsdesign

Airtag Bike Saddle Mount with M3 Heatinsert for Ergon and SQLabs saddles

Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.

Downloads
689
Likes
78
Rating
5
P
PrintablesBranoHaniačik

Saddle for horse Schleich

Saddle for horse Schleich. Print from TPU filaments !!!!

Downloads
687
Likes
75
Rating
5
P
Printablesbamfengineer

Saddle Hunting Bridge Spreader (Hip Saver)

Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…

Downloads
590
Likes
32
Rating
5
P
PrintablesYosuke

Air Tag bike saddle rail mount

There are many design for this application but this is my version of Air Tag mount for bike. I wanted to make minimal and a little hidden one since it shall not be too obvious in my opinion. It utilizes the saddle rails to fix. (diameter…

Downloads
558
Likes
115
Rating
5
P
Printablescewo

Stealth Airtag Bike Saddle Mount

This mount fits one Apple Airtag under the saddle directly over the clamp. Printed with black filament the device is hardly visible. Assembly: 2x M3x16 socket head screw, 2x M3 square nut. Saddle rails: c-c 43 mm, ø 7 mm This model is…

Downloads
477
Likes
78
Rating
5
P
Printablesunwohlpol

bicycle saddle

I acquired an aged street bike in questionable condition early this summer and I absolutely love it! It's green, it's made of steel, it's got two wheels and all the other bicycle stuff. Only thing left to complain was this torture device,…

Downloads
475
Likes
67
Rating
0
P
PrintablesTJDesign

AIRTAG BIKE SADDLE MOUNT

Hide your Apple AirTag under your bike saddle. Out of sight, but the signal isn't blocked the way it can be when the tag is hidden inside a metal frame or tube. - Installs in minutes with just 3 tie-wraps (cable ties). No tools, no…

Downloads
475
Likes
76
Rating
4.67
P
PrintablesBoomi

Bontrager Flare RT holder for Standart Saddles

Pull out the original holder form the rubber an screw it together with my holder. You additional need 2x M4 Locknuts and 2x M4x15 screw and also a cutted off M5x17mm screw. Print with 100% infill.

Downloads
471
Likes
23
Rating
0
P
PrintablesLarryD

Bicycle Saddle

A 3D scan of a bicycle saddle. Prints nicely in PLA with 0.6 nozzle size. Requires lots of support underneath and careful removal to not damage the rails.

Downloads
470
Likes
36
Rating
0
P
Printablesilmetamorfoso

Garmin Varia Clip for Fizik (ICS) Saddle - NOW LONG

YTGRRL Summer Update!!! NEW BBD MAGNUM MODEL, now with EXTRA CLEARANCE for your baggage. By popular demand, the shaft is now LONG. This WILL lead to breakage, but I am here to please. Garmin quarter turn mount for Fizik saddles with an…

Downloads
467
Likes
18
Rating
0
P
PrintablesRIBsfit

Winchester SXP Defender Picatinny Rail/12ga Shell Side Saddle

I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…

Downloads
445
Likes
36
Rating
0
P
PrintablesLopolas

Selle Italia SLR Boost + Trek Bontrager Flare RT Light Saddle Mount

Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…

Downloads
444
Likes
25
Rating
5
P
Printableshugodrax

Garmin Varia Bontrager Blendr Saddle Mount

This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…

Downloads
410
Likes
24
Rating
0
P
PrintablesOliver Thomsen

GoPro like mount for bike saddle

I've also created a GoPro compatible mount for the rails of a bike saddle in order to use it with my SIGMA BLAZE mount ( https://www.prusaprinters.org/prints/61869-sigma-blaze-mount-gopro-compatible ). The mount snaps on top of the rails…

Downloads
409
Likes
74
Rating
4.75
P
PrintablesCTX

Garmin Varia - Giant UniClip Saddle mount

Garmin mount to take advantage of Uniclip system on the saddle for attachment

Downloads
400
Likes
29
Rating
5
P
Printablesgaryfain

Guitar Saddle

I lowered my Martin guitar strings to about .068” above the fret as measured on the high E-string at the 12th fret. Low E-string was around .078”. It has a good playable tone without buzz. Sounds about as good as the bone saddle, so I…

Downloads
399
Likes
19
Rating
5
P
PrintablesTom in MN

Saddlebag mount for a Garmin Varia (extra secure)

A mount for a Garmin Varia radar to a saddle bag. I added a slot under the Garmin mount plate for a wire tie around the whole thing to make it extra secure. The downside is that you need longer screws than the ones that come with the…

Downloads
345
Likes
31
Rating
5
P
Printablesthall72

Lego Compatible (4491b.dat) Animal Horse Saddle with Two Clips

This model is compatible with the lego system.

Downloads
315
Likes
34
Rating
5
P
Printablesxxorza

Telescope dovetail saddle y split mount

Useful if you need to mount two accessories onto one dovetail saddle onto your telescope. https://a360.co/3a6fCNv fusion 360 model

Downloads
309
Likes
33
Rating
0
P
PrintablesShane Graber

Parametric Pipe Saddle Clamp

Used for hanging piping from rafters, joists, walls, etc. I needed this for hanging a section of PVC pipe from a ceiling joist to hang my filament spools. Worked like a charm. Instructions This Thing is fully parametric. Download the SCAD…

Downloads
307
Likes
22
Rating
5
P
Printablesjmlee3k

Mossberg 930 Side Saddle

Printed with 3+ perimeters for strength (.4mm or .6mm). PETG is ideal for being robust. Remove receiver pins x 2, and replace with #10-32 x 1-¾" bolts using slim nyloc washers on the back. Good retention for 3" 00 shells and others of…

Downloads
306
Likes
59
Rating
0
P
Printablesbjorncs

Garmin Varia mount w/ Airtag for Specialized saddles

Modified the original to fit a slightly larger Garmin quarter-turn insert bought on Aliexpress. The original fits ~32mm diameter insert while this accepts up to ~34mm. The screw holes for the insert are slightly misaligned, although it…

Downloads
306
Likes
31
Rating
5
P
PrintablesJeremy

Garmin Varia / Magene L508 Saddle Mount for Saddle Bag Clearance

Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…

Downloads
304
Likes
31
Rating
0
P
PrintablesTanner Farley

Ruger Mark IV Light Saddle

Ruger Mark IV Barrel Shroud That Adds 1913 Picatinny Rail In The 6 O'clock Position For Adding Lights And Lasers.

Downloads
304
Likes
34
Rating
5
P
PrintablesMilkiman

Airtag bike saddle mount for Selle Royal

This is a remix of an existing airtag bike saddle mount which, in its original configuration, did not fit my Selle Royale Essenza Plus saddle. I really simply modified the model to fit the spacing of the saddle, but also to even get the…

Downloads
296
Likes
23
Rating
5
P
Printablesbjamdesign

Bike - Cateye rear light saddle rail mount

I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…

Downloads
289
Likes
31
Rating
0
P
PrintablesArgus

Saddle room for Schleich play

This is an almost completed saddle room for children's plays. The door and hatch for pets are not modeled. The owner of this stable is Veera, and if you want another name carved on the front wall, send a message. Edit: A blank version of…

Downloads
288
Likes
44
Rating
5
P
PrintablesJason T

Tether Keeper for Saddle Hunting

What the Tether Keeper (TK) does : Prevents the tether loop around the tree from loosening when tether is no longer taut. How it works : Friction fit onto the vertical component of the tether that acts as a stopper for the tether thru…

Downloads
287
Likes
33
Rating
0
P
Printablesdantech

Saddle bike mudguard fender v5

Saddle bike mudguard fender Category: Sport & Outdoors

Downloads
284
Likes
56
Rating
0
P
PrintablesPhil Caruso

Auto-Rewinder Saddle for Ultimate Filament Drybox Remix

These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…

Downloads
281
Likes
71
Rating
0
P
PrintablesMiksi

Bike saddle rail GoPro mount

Found this saddle rail mount for a rear facing GoPro, but the original rail dimensions didn't fit my saddles so redesigned the mount for my stock Haibike Selle Royal and WTB Volt rails (and added some fillets, centred the mount and gave…

Downloads
274
Likes
42
Rating
5
P
Printablesbjamdesign

Bike - Ergon saddle Cateye light mount

A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…

Downloads
261
Likes
33
Rating
5
P
Printablesrsdesign

Specialized AirTag Saddle mount for SWAT-compatible mounting holes

I don't think the design needs much description. You can mount an AirTag under the orginal Specialized saddles with SWAT mount. I have it mounted with M5x10 screws.

Downloads
250
Likes
15
Rating
0
P
Printablesmaxelman

AirTag mount for Specialized SWAT saddle

Tested and working, however the fit is very tight. Ideally the cover is reduced slightly to allow an easier fit and removal. Requires 2× M5x15mm bottle cage bolts Printed in PLA on a Bambu Lab X1C

Downloads
246
Likes
21
Rating
5
P
Printablesrepe

Airtag holder for bike saddle rails

Simple, self-snap, airtag holder that you can secure with cable tie or 3mm bolt and nut.

Downloads
236
Likes
22
Rating
5
P
PrintablesIvan Urbánek

Cateye bicycle light saddle rail mount

This is a mount for Cateye rear light that attaches to saddle rails by zip ties. It's semi universal, it won't fit every saddle, but it should fit most of them. There are 4 versions for different saddle rail sweeps: 9°, 20°, 30° and 41°.…

Downloads
226
Likes
36
Rating
5
P
PrintablesUenbzsto

Saddle for Flexi Trex

The Flexi-Trex by Benchy4Life is awesome. Now this saddle lets your Lego figures ride on their own Flexi-Trex. Print Settings Prusa Mk2 Rafts: No Supports: Yes, if printing the whole saddle at once Resolution: 0.1 Infill: 20% Notes: I…

Downloads
217
Likes
78
Rating
5
P
PrintablesSascha

Samsung Smart Tag Holder for Bike Saddle

I designed a holder for my Samsung SmartTag to fit on my Ergon Saddle. The button on the Tag has to face down in the part “STag_unten” Use Supports Ad a piece of foam inside to stop ratteling.

Downloads
214
Likes
29
Rating
4.5
P
Printablespatrickzell

Mount for bicycle backlight under saddle

Mount for a small battery led backlight under your bikes saddle

Downloads
213
Likes
34
Rating
5
P
PrintablesMoWeBo

AirTag Bike Saddle Holder

Another simple AirTag Holder for a bike saddle. You need 2 M4x8 + 2 M4 nuts to fix it. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 50% Filament: Smartfil ASA…

Downloads
209
Likes
32
Rating
4.5
P
PrintablesMeister Edel

Saddle Pad 4 Fizik

My neighbour wanted to have a 3D printed, brown saddle pad. So we took his Fizik saddle, remooved the pad, designed a fitting new one and glued it in place. So if you have a Fizik saddle too and want to print a new pad: Buy some good TPU…

Downloads
208
Likes
67
Rating
5
P
Printablesdantech

Saddle bike mudguard fender v4

Saddle bike mudguard fender new version (v4), with another design and more rigidity. Category: Sport & Outdoors

Downloads
206
Likes
46
Rating
5
P
PrintablesDavid Holecko

Bike Saddle Angle Tool

Phone holder for quick and easy measurement of bike saddle angle.

Downloads
201
Likes
66
Rating
5
P
PrintablesYamadaTaro

Specialized saddle SWAT Gopro mount

Specialized saddle swat Gopro mount For rear light or RADAR I print with PC-CF,over 1000km no problem. ->Mount print with PC-CF broken, about 3000km. Now using with eSUN ePA-CF. Not recomend ABS/ASA,broken with 250km.

Downloads
200
Likes
27
Rating
0
P
PrintablesoXiVanisher

Chipolo one tracker mounts for bike saddles

Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…

Downloads
198
Likes
21
Rating
5

1/64 scale saddle tank

This model is for 1/64 scale tractors and the tank goes on the side of the tracotr and it can be used for hold nitrogen in real life for when you are spraying or planting. This is perfect for farm diaramas with high detail and unique…

Downloads
198
Likes
23
Rating
5
P
Printablescmh

Pedal insert for measuring saddle height

Replaces the drive side pedal to allow precise measurement of saddle height from the centerline of the pedal spindle. Note! This model is larger than the one in the photos. After printing that prototype I realized it was too small to be…

Downloads
192
Likes
34
Rating
5
P
Printablesbaumy

Garmin Varia Mount for Prologo Scratch M5 Saddle

Garmin Varia Mount for Prologo Scratch M5 saddle. There are two variations: with D4 holes for mounting directly to the saddle with D7 holes to insert rubber bushings for vibration dampening

Downloads
185
Likes
8
Rating
0
P
PrintablesDirk

15mm copper pipe clamp saddle

15mm copper pipe clamp saddle. PETG 0.20mm 25% infill. Created with FreeCAD.

Downloads
178
Likes
29
Rating
5
P
PrintablesPeter H

ROPE OR CABLE SADDLE

A simple saddle - prints on its side with no support needed. I used PETG at .3mm layer height and four perimeters so they'd print solid without infill. They were originally designed to hold towels and clothes in our camper and worked…

Downloads
172
Likes
73
Rating
5
P
PrintablesSteve Rowe

Clamp Saddles fit Bessey, Jet, and Gross Stabil parallel clamps

These clamp saddles fit Bessey, Gross Stabil, and Jet parallel clamps. They may fit other makes but I have not verified. My intent was to provide reference points for flat panel glue-ups and provide clearance to scrape glue while still in…

Downloads
164
Likes
37
Rating
5
P
PrintablesBehold81

Garmin Varia Topeak Wedge Medium Saddle Bag Mount

Being short and unable to mount a varia to my bike with a saddle bag attached I decided to create the following solution. This uses hardware included in the Varia and topeak kit. this might fit other topeak bags if the mounting system is…

Downloads
164
Likes
11
Rating
0
P
Printablestuna-fish

Exposure TraceR Saddle Mount

Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…

Downloads
163
Likes
6
Rating
0
P
PrintablesAnt

Saddle Hook for Platform

Attachment point for the webbing on a Method 2 saddle for the xwing platform from Latitude. Printed in [email protected] .6noz - held the weight well on over a dozen climbs.

Downloads
160
Likes
18
Rating
5
P
PrintablesNiuthon

Saddle Square - Metal/Woodworking 3D square

Small but solid 3D square with ruler for metalworking and woodworking, especially convenient for square steel profiles. Arms are 60 mm long. Made for marking cuts on steel to weld. Print with at least 4 walls for sturdiness, and 20% infill.

Downloads
159
Likes
43
Rating
0
P
PrintablesBazzalight

Under Desk Saddle Mount for Netgear 8 Port Switch

It was designed to attach to the underside of a desk. There are lugs that fit the bottom screw holes of the switch. It also has hooks to clip in the cables to keep it somewhat tidy. If you have a 200x200 build plate like me then rotate it…

Downloads
153
Likes
18
Rating
0
P
Printableskamosawasan

Universal Bike Handle/Saddle Protector for Upside-Down Maintenance

Print three of this and your problem is gone. All the cyclists have a common problem such that their bikes handles are scarred when you turn the bikes upside down and work on wheels detached or something other maintenance. The situation…

Downloads
153
Likes
39
Rating
5
P
PrintablesMasonthegreat

Saddle Hunting Prusik Tender

Wanted a prusik tender but couldn't find any files out there so I tried out some 3D modeling, it works great!

Downloads
149
Likes
22
Rating
0
P

Tripod Rifle Clamp - "Pig Saddle"

This is intended to be put on a tripod and hold your rifle for more stable shooting. I worked on this a while back and just remembered I hadn't put it up here. It needs some work, but does work as is. A thumbscrew for tightening the…

Downloads
149
Likes
18
Rating
0
P
PrintablesPhil Caruso

Auto-Rewinder Saddle for Extrutim Cheap Drybox

This Saddle replaces the rollers in @Extrutim 's Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled filament due to MMU ejection…

Downloads
148
Likes
47
Rating
5
P
Printablesdrush

Airtag Saddle Mount - Mountain Bike

Found most of the airtag saddle mounts didn't fit for me, my saddle rails were not 44mm apart but rather 42mm and thus needed to be slightly different than what exists. Uses 2 socket-head cap screws (M3) and 2 M3 hex nuts to mount.

Downloads
145
Likes
27
Rating
0
P
Printablesgarafe

MagicShine Seeme Saddle Mount - ciclismo, luz, soporte sillín

MagicShine Seeme Saddle Mount - ciclismo, luz, soporte sillín carbono bicicleta. Seeme 200

Downloads
145
Likes
7
Rating
0
P
Printablesjerry777

Garmin Varia Saddlebag Mount

Saddlebag mount for Garmin Varia Radar lamp. It can be mounted on a saddlebag and extra secured by a cable tie. To secure it even more and make it less wobbly I designed a stabilizer which is secured at the back with a cable tie and…

Downloads
144
Likes
22
Rating
5
P
PrintablesEdouard

Varia RCT715 Specialized SWAT saddle mount

Please review, it was designed for someone else i cannot test it. 2025-04-10/No setback model now available no support PA6-CF 3rd iteration

Downloads
142
Likes
13
Rating
0
P
PrintablesSebastian T

Woom 4 Saddle Light Holder

I designed the model to adapt a standard bicycle rear light to a Woom 4 bike.. The new models have a mount under the saddle, which I used for this purpose. There are two versions with different angles. As an option, I generated the rod in…

Downloads
141
Likes
18
Rating
5
P
Printablesilmetamorfoso

Garmin Varia Clip for PRO Saddle

Garmin quarter turn mount for Shimano PRO saddles. Attaches to the back of the saddle via the OEM attachment points. This was printed on PLA for testing. At some point I'll print it in ASA. Model is based off my Garmin Varia Clip for…

Downloads
136
Likes
5
Rating
0
P
PrintablesAri

Wahoo Trackr Radar Saddle Rail Mount

Saddle rail mount for the new Wahoo Trakcr Radar. Attaches to the saddle rails with small zip-ties. Print with organic supports either on build only or for support enforces only. I printed it in PC Blend and .10 layer height on my Prusa…

Downloads
135
Likes
3
Rating
0
P
PrintablesTony Tsai

Pipe Saddle Clamp with Buttrusses

Pipe clamp to fix pipes to walls. :) Main parameter is pipe_d. screw_xxx parameters determing what type of screw you use. Currently set as a 8 gauge wood screw. (You can change it to a pan head by setting screw_trans to 0) support_d…

Downloads
133
Likes
16
Rating
5
P
PrintablesModel Magic

Western Movies - Blazing Saddles - 1974

Western Movies - Blazing Saddles - 1974 3D printable model.

Downloads
131
Likes
26
Rating
0
P
Printablesbjamdesign

Bike - Cateye rear light saddle rail mount - angled rails

I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution BUT a design that wouldn't interfere with my saddle position being pushed totally forward like this one would . So,…

Downloads
131
Likes
10
Rating
0
P
PrintablesMFP
18+

The source marked this model as adult content.

Downloads
129
Likes
25
Rating
4
P
PrintablesKoosh

6.5 Creedmoor round saddle (M-lock)

This is a bullet saddle for a 6.5 Creedmoor rifle and it holds 6 rounds. Could make is as long or short if need be. (Find 3MF attached)

Downloads
129
Likes
23
Rating
0
P
PrintablesBas

Ukulele tie bar / bridge and saddle

Replacement tie bar for an Ukulele. 42mm distance between outer string holes. Includes two saddles, one 8 mm one 6.5 mm height. Print in ABS for strength, use brim and 4 perimeters on saddle Category: Music

Downloads
127
Likes
8
Rating
0
P
PrintablesCheese

Chipolo saddle holder

This is a similar concept to @repe 's Airtag holder , but designed for Chipolo One finders. I've attached two lid files, one for bicycle saddles with round steel rails and one for saddles with tall carbon rails. Both are held in place by…

Downloads
126
Likes
9
Rating
0
P
PrintablesJohnA

specialized mountain bandit swat under the saddle tool and tube holder clone

Not printed and tested yet but the dimensions should all be good. I am planning on using a small velcro strap or maybe a short voile strap to keep the tube and compressed air cartridge in there. Category: Sport & Outdoors

Downloads
125
Likes
15
Rating
0
P
PrintablesGerhard

Mudguard for Fizik saddle

Some Fizik saddles have a clip in system. This mini-mudguard clips into this receptor. As a mudguard this is of course not 100%, but it protects your behind from getting splashed with dirt. It has a small shield to protect the gap between…

Downloads
124
Likes
30
Rating
5
P
PrintablesCowboy

Minimal M3 zip tie saddle

I've printed these in PLA at 0.30mm without issues. I typically print between 10-30 of them all at once, 1mm apart, with a brim. I'm using these in my eurorack modular synth with M3x8mm flat head screws to hold cables in place. Just note…

Downloads
123
Likes
18
Rating
5
P
Printablesslothstops

AirTag bike saddle mount - M3 Bolts, weld-in rivets

Remix of IBI Productions AirTag bike saddle mount

Downloads
122
Likes
11
Rating
4.33