Search results: saw

Sort order

3,779 models

P
Printablesjcjames_13009

Featherboard for table saw

Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…

Downloads
9,852
Likes
2,702
Rating
4.91
P
PrintablesJopek Design

Articulated Sawfish (Carpenter shark)

Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…

Downloads
7,734
Likes
1,389
Rating
4.95
P
PrintablesPrintChallenge

Pochita (Chainsaw Man)

Have fun printing Pochita!

Downloads
5,827
Likes
1,002
Rating
4.9
P
PrintablesRCMakerLab

Powerful & Useful 3D Mini Saw

Many parts of the saw are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the track names. Any settings…

Downloads
5,465
Likes
1,370
Rating
4.67
P
PrintablesPrateek R

Tracksaw Square for Makita & Festool

A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…

Downloads
4,505
Likes
691
Rating
4.95
P
PrintablesJan Štech

Blade Scraper, Saw Handle, Wire Stripper

Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…

Downloads
4,045
Likes
1,417
Rating
4.95
P
PrintablesFearless

Table saw for Dremel

Support_dremel.STL for Dremmil 4000 Use the table extension for larger pieces for more stability and control, but also protects the sparks when cutting steel. INFO: To adapt other drills you can try with “All Motor Bracket.STL”…

Downloads
3,998
Likes
1,746
Rating
4.75
P
PrintablesTimo

Track Saw Fence

Attachable Fence for tracks/guides from Festool and Makita for 90 degree rip cuts. One can attach a piece of plywood at the reference edge for a longer fence. Print instructions PLA 0.3mm layer height 3 perimeters 20% infill (gyroid)…

Downloads
3,497
Likes
518
Rating
4.68
P
Printables3DDIY

Festool, Makita, Bosch Track Saw Rail Holder

This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to…

Downloads
3,435
Likes
605
Rating
4.79
P
PrintablesLindh3D

Push Stick for table saw

Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request. Print instructions Category: Hand Tools Summary Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request.…

Downloads
3,344
Likes
556
Rating
4.87
P
PrintablesBwolfey

Zero Play Guide Bars for table saw miter slot

The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…

Downloads
3,180
Likes
735
Rating
5
P
PrintablesLCSteve

DeWalt DWE7485 Table Saw Zero Clearance Insert

I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…

Downloads
2,978
Likes
378
Rating
5
P
PrintablesRCMakerLab

Mini Table Saw

Many parts of the circle saw are designed for PLA (PLA+ or Tough PLA is recommended) filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. Apart from the…

Downloads
2,710
Likes
438
Rating
4.33
P
PrintablesFulcrum Design

Table Saw Push Block

Table saw push block. Print flat. Recommended at least 30% infill and 4+ walls for strength.

Downloads
2,697
Likes
644
Rating
4.79
P
PrintablesSanford Prime

Saw Horse Folding Bracket

These are some fantastic sawhorse brackets. The idea was to create something 3D printable that matches the design and functionality of store-bought saw horse brackets. Why print it? Well… I needed a set and why not? These brackets proved…

Downloads
2,527
Likes
1,488
Rating
5
P
PrintablesPEU

Jig Saw Handle

Jig saw handle Fits perfectly to Bosch blades Secured manipulation with screw tightening ring Solid rounded handle All parts are fully printable, painted some supports for the handle, but without them it should print fine too. The handle…

Downloads
2,518
Likes
837
Rating
4.93
P
PrintablesC0PATHUK

Pochita (Chainsaw Man) FDM - separated parts

I changed: • the location of the tail is moved lower; • the shape of the back handle; • my top handle (shape closer to anime); • my tail cord; • made a model of supports for the tongue, teeth and rear hole for the back handle. It is…

Downloads
2,481
Likes
514
Rating
4.97
P
PrintablesBlind Maker

Makita / Festool Track Saw Guide Rail Holder

Complete redesign of 3DDIY's nifty print-in-place guide rail holder. As I wanted to hang my rails on a garage door, I needed something a bit stronger and more secure. Also wanted to be able to mount these with the rubber strip facing up…

Downloads
2,296
Likes
331
Rating
4.95
P
Printablesloidolt

Chainsaw Wall Mount

Updated to avoid potential infringement with patent application US 20220118600 A1 Hook-style wall mount for small to medium chainsaws. I'm using it for the Dewalt Flexvolt 16" Cordless Chainsaw. Print with a large layer height and…

Downloads
2,276
Likes
312
Rating
4.92
P
PrintablesRCMakerLab

Scroll Saw

Many parts of the scroll saw are designed for PLA (PLA or PLA+ is recommended) filament. Some parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. The link for slicer setting…

Downloads
2,224
Likes
508
Rating
5
P
PrintablesKajasX

dust and sawdust extraction module for DeWalt milling machine DCW600 DCW604

Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…

Downloads
2,175
Likes
381
Rating
4.94
P
PrintablesJohnMartin

Tracksaw Guide plate/adapter for Makita Trim Router

My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…

Downloads
2,154
Likes
256
Rating
4.67
P
PrintablesPrintedByMark

Sawtooth from Horizon Zero Dawn

Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…

Downloads
1,905
Likes
445
Rating
5
P
PrintablesGloomeskk

Sawtooth from Horizon Zero Dawn

Pre-cut for printing without support or in one piece.

Downloads
1,870
Likes
883
Rating
5
P
Printablescewo

Makita Track Saw Guide Rail Protection

This end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. Faced down. No supports. Here’s the Festool saw track bumper:…

Downloads
1,855
Likes
313
Rating
4.86
P
PrintablesDarin M

Jigsaw blade case

I designed this case to hold a 50-piece set of assorted jigsaw blades I bought on Amazon. They came individually wrapped in plastic and in a single compartment case but that made it difficult to find the ones I wanted. With this case I…

Downloads
1,818
Likes
779
Rating
4.81
P
Printablescewo

Festool Track Saw Guide Rail Protection

This end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports. Update 20230623: Small modification on the splinter guard side (removed…

Downloads
1,755
Likes
282
Rating
5
P
PrintablesART TOO

SAW HANDLE - MINI HACKSAW - (Tested)

Easy to use mini hacksaw, No screws needed only a gentle push

Downloads
1,721
Likes
607
Rating
4.93
P
PrintablesZax

Chainsaw 1/10

I made it from ABS and used acetone vapor. Some parts like front handle and brake have to be modified. It is intended as accessory for 1/10 expedition RC cars. It is designed for fdm printers with 0,25 nozzle. Box for Chainsaw can be…

Downloads
1,721
Likes
385
Rating
4.91
P
PrintablesPrintChallenge

Denji (chainsaw man)

Update 11/01/2023: added pre-supported files. Note: pants_shoes_sup not yet tested (lost file, had to place supports again)

Downloads
1,635
Likes
281
Rating
5
P
PrintablesDedoper

Dremel 3000 table saw with multi-purpose holder.

Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…

Downloads
1,606
Likes
405
Rating
4.88
P
Printablesdjedje_zr7

Handle for hacksaw blade (U2)

Garage Set 8 : Handle for hacksaw blade Update : U1 : Screw with little head U2 : Nex Gcode and print successfully Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…

Downloads
1,575
Likes
444
Rating
4.83
P
Printablesslipangle28

Makita Festool Track Saw Dust Collector Hose Deflector FS-AW

This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…

Downloads
1,567
Likes
311
Rating
4.92
P
PrintablesWoodenti

Thin Rip Jig for table saw (DeWalt 7492)

How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…

Downloads
1,566
Likes
455
Rating
5
P
PrintablesSteve 3d

Jigsaw Hoodie Beads

These beads lock the cords together on your hoodie or any other cord that will fit in a 4 mm or 5 mm hole 0.2 layer height with or without support Made in Inkscape and Blender

Downloads
1,559
Likes
860
Rating
5
P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Downloads
1,515
Likes
268
Rating
4.91
P
PrintablesRichiH

Jigsaw saw blade holder (Bosch, Festool, Ryobi, DeWalt, Makita, etc)

A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…

Downloads
1,491
Likes
497
Rating
4.94
P
PrintablesGuido666

Billy The Doll From Saw/Jigsaw - Mask!

A remix of the original "Billy The Doll From Saw/Jigsaw" head, to make a Halloween mask. I hollowed the head, cut the back of the head off, and put holes in the eyes. I printed at 115% to fit my face. This was also max size to fit on the…

Downloads
1,450
Likes
218
Rating
4.57
P
PrintablesJeremyKMac

Makita Cordless Track/Plunge Saw Dust Cover

This cover/cap is for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover is very precise. It will keep dust from escaping through the side opening, thus improving dust collection. Be sure to check out…

Downloads
1,382
Likes
141
Rating
4.8
P
Printables駄目g

Rail Hinge for tracksaw and MFT-style table/workbench

I like my homemade MFT, but I am tired of the parf dogbench clips. I liked Tamar's design for the 3d printed tracksaw hinge (linked below), but it is expensive (plus one needs to add international shipping). I decided to give it a try. My…

Downloads
1,373
Likes
159
Rating
5
P
PrintablesMyers Woodshop

SawStop Table Saw Utility Drawer (left side)

Now that you have the best table saw on the market, the Sawstop PCS or Industrial, why not make it even better? This utility drawer fits into the rail slot on the left side and is a perfect place to hold your pencils, pens, marking tools,…

Downloads
1,357
Likes
147
Rating
4.78
P
Printableslewosh

Adjustment Jig for DeWalt Table Saw DWE7492

I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…

Downloads
1,323
Likes
281
Rating
4.75
P
PrintablesMatamata

Ego Chainsaw Wall Mount

*****V4 Fixed issue where model was split***** Wall mount of the Ego 56v Chainsaw. This model should work for all of them. I have the 18" model and it works great. Ideally this should be mounted to a stud, but I am using drywall anchors…

Downloads
1,306
Likes
109
Rating
5
P
Printablesdandos23

DeWalt Jigsaw DCS331

This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…

Downloads
1,295
Likes
218
Rating
5
P
Printablestcatca

Track Saw Square - Festool FS-WA square Angle guide 90°

If you download please press ‘like’ to push this thing up the search to help others to find it. If you make it, post your make. https://www.festool.fr/produits/nouveaut%C3%A9s/nouveaut%C3%A9s/205229---fs-wa90%C2%B0…

Downloads
1,249
Likes
314
Rating
4.8
P
Printablesvindolin

Parkside PFBS 12 Table Saw

Simple height adjustable, two part table saw for the (Lidl) Parkside PFBS 12 B2. Now with stop block.

Downloads
1,247
Likes
327
Rating
5
P
PrintablesmmOne

Ergonomic Hacksaw Handle

This is a hacksaw handle that accepts a standard 12mm / 1/2 inch wide metal hacksaw blade. It's very useful to get into small spaces and for flush cutoffs. Last but not least it allows to recycle broken or partially worn blades. Mount the…

Downloads
1,242
Likes
117
Rating
4.6
P
PrintablesMichel

Feather Board for DeWalt Table Saw 7491 & 7492

This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…

Downloads
1,215
Likes
200
Rating
4.8
P
PrintablesJamie Saunders

Jigsaw Puzzle Chess Board

This model takes a different twist on the traditional chess board by making it into a jigsaw puzzle. Each individual chess square is an individual puzzle piece, which can be slotted together underneath to keep a regular checkered top.…

Downloads
1,178
Likes
181
Rating
4
P
PrintablesShopTeacher

Reciprocating Saw Blade Handle - Sawzall Blade Handle

S ummary: Four piece ergonomic handle to securely and safely hold reciprocating (Sawzall) blades. Uses three M4x16 machine screws and nuts. Hardware Note: Before printing be sure to select the correct “Right Handle” for your hardware. One…

Downloads
1,176
Likes
566
Rating
5
P
PrintablesBBTheStig

Dewalt 7491 Zero Clearance Table Saw Throat Plate - 7491RS - 7492QS

I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…

Downloads
1,153
Likes
105
Rating
5
P
PrintablesSimplifiedLife

Dremel Cutoff Saw

This is a Dremel / Rotary tool cutting mount for precision cuts of rods, screws, bolts, drill bits, tubes and more. I wanted to do the Pin Mod on my Voron 2.4r2 and I didn't have an accurate method to cut the pins to size. I ordered the…

Downloads
1,127
Likes
337
Rating
4.75
P
PrintablesPeter H

TABLESAW THIN RIP JIG

Despite the way it looks, this is a very simply tool to print, although some care is needed to insert nuts and a bearing during the process. The following is a step by step set of directions for printing, assembly and use. I shouldn't…

Downloads
1,104
Likes
669
Rating
4.91

Chainsaw Man Head

Yes supports are needed, how much is up to you. I usually stick to Bed-only supports.

Downloads
1,088
Likes
200
Rating
0
P
PrintablesAlbert Barber

Transformable Dremel table saw / disc sander / shaper

Imported from https://www.thingiverse.com/thing:2365532 This is a transformable and adjustable rotary tool based table saw / disc sander / shaper for use with the Dremel Flex Shaft attachment. The Flex Shaft should fit most rotary tools,…

Downloads
1,077
Likes
333
Rating
4
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
PrintablesNik Potapov

Denji from Chainsaw Man anime minifigure

Recommended size: 11-20 cm. I hope that you will be satisfied with this model. If you want to say thanks you can also buy it here for 1$. https://www.turbosquid.com/FullPreview/2109170

Downloads
1,076
Likes
157
Rating
5
P
Printablesjorticus

Bonsai Saw

There are not many options for small fine-toothed wood saws, especially for bonsai use. Inspired by other jigsaw handle models here, I designed this specifically for use with bonsai, featuring a curved handle with many different grip…

Downloads
1,061
Likes
619
Rating
5
P
PrintablesZach Tish

Milwaukee Packout M12 Hacksaw Insert

This is my version of a 3D printed Milwaukee Packout insert that will hold the Milwaukee M12 Hacksaw. I used the Milwaukee Packout Compact Organizer insert designed by @ChadBaker_317227,…

Downloads
1,057
Likes
185
Rating
5
P
PrintablesRCMakerLab

3D printed Mini Saw V2.0

Useful and mighty saw for hobby work. All the details are in the video. The necessary materials are in the description section below the video. PLA Filament, Infill %20 Arm Part ARM Part14 ARM Bearing Holder BACK Bearing Holder FRONT Belt…

Downloads
1,041
Likes
307
Rating
5
P
PrintablesJohnMartin

Parallel Guides - Fits Makita/Festool/Wen Track Saw Guide Rails

Non-Printed Parts (2x) 2040 Aluminum Extrusion (I used 1000mm) https://www.amazon.com/gp/product/B08BCG1FT9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (2x) 1/4 - 20 Bolts (1.5 inch) (2x) 1/4 - 20 Nuts (2x) 1/4 - 20 T Nuts…

Downloads
1,036
Likes
297
Rating
4.2
P
PrintablesJeremyKMac

Track Saw Guide Rail End Cap

I realize that there are several other version of these guide rail end caps. This is my own version that I quite like. These were designed with the Makita guide rail specs and should work with Festool and Powertec guide rails, possibly…

Downloads
1,033
Likes
168
Rating
4.89
P
PrintablesThomas

Ultimate Jig Saw Handle

Jig saw handle with container for blades Fits perfectly to Bosch blades Screw cap to avoid to loose blades The container accepts more than 8 blades Secured manipulation with screw tightening ring All parts are fully printable. The handle…

Downloads
1,031
Likes
254
Rating
4.96
P
PrintablesAcEjbc

Chainsaw STIHL

Chainsaw STIHL

Downloads
1,027
Likes
68
Rating
5
P
PrintablesDrAl

Track Saw Waste-Side Kerf Jigs

Waste side jigs for track saws / guide rail saws / plunge saws. These are used when you want/need to have your guide rail on the waste side of the line. If you put the splinter guard up to the line on your workpiece, your workpiece will…

Downloads
1,019
Likes
176
Rating
4.86
P
Printableserispe

Sphere Jigsaw Puzzle

As a modelling challenge for myself I made a copy of a wooden puzzle I bought on Amazon some time ago. It seems to be a classic design found in many toy puzzle collections. In orderr to make this print without any supports I separated the…

Downloads
1,012
Likes
188
Rating
5
P
PrintablesSasquatch

Wall Mount Ryobi Jigsaw || Wandhalterung Ryobi Stichsäge

I wanted a wallhanger to hang my Ryobi jig saw. As I couldn't find one I designed one myself. Printed it with Bambulab PLA with 0.2 layerheight, 25% Infill and 3 walls.

Downloads
1,005
Likes
173
Rating
5
P
PrintablesMLoeko

Power chainsawman anime figure

Power figurine from chainsawman anime In pieces to glue together used prusa slicer 2.6 alpha6 for pins

Downloads
1,002
Likes
176
Rating
5

The PrusaWatch - Individually modifiable Band / Strap in for watches in TPU

The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…

Downloads
985
Likes
199
Rating
4.89
P
PrintablesEnginerd

Milwaukee M18 Sawzall Bracket

Bracket to hang an M18 Sawzall

Downloads
930
Likes
131
Rating
4.5

Stackable Jigsaw Puzzle Sorting Trays

Take your puzzling to the next level with these stackable, nesting, lightweight sorting trays. Separate pieces by shape, color, or any other method; the trays are easy to pick up and move around the puzzle as needed. The trays stack…

Downloads
924
Likes
324
Rating
4.89
P
Printablessebiprotagonist

Tracksaw Square for Makita & Batavia

Remix of Prateek Rs square. Adjusted for a tighter fit to my Makita & Batavia tracks. Removed slopes and larger roundings for easier upright printing. Added versions that leave space to clamp down the tracks.

Downloads
924
Likes
146
Rating
4
P
Printablescewo

Makita Track Saw Parallel Guide Extension Set

Repeatable rips with the Makita track saw This jig makes it easy to cut precise strips of exactly the same width when panel cutting. Two side fences are mounted on the guide rail. The required dimension is set with the adjustable stops.…

Downloads
918
Likes
282
Rating
5
P
PrintablesGot2b3d - Oxana
Downloads
910
Likes
195
Rating
4.89
P
PrintablesLittle_Leo

Chainsaw Holder Wall Mount / Stihl Husquarna Dolmar / Stihl HSA - MSA / Gerätehalter / Tool holder

Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…

Downloads
895
Likes
87
Rating
0
P
PrintablesWHerzog

Cardboard saw, Cardboard tools and cardboard screws

This is an enhancment toolset for using cardboard screws. This set based on our own experience using our popular cardboard hand tool and also some user feedback I got. This additional cardboard toolset contains the following tools and…

Downloads
892
Likes
172
Rating
4.44

Milwaukee M18 Jigsaw Mount

This will securely hold a Milwaukee M18 Fuel jigsaw (model 2737-20) and should work with other brands and models as well. There is a relief slot so that the saw may be stored with a blade in place. Additionally there is a circular feature…

Downloads
886
Likes
136
Rating
5
P
Printablesmgrobins

Milwuakee M18 Fuel Track saw Arbor Port Dust Cover

Please upload makes - it's how I afford my filament and improve my design! This Dust Cover is designed to fit the new Milwuakee M18 Fuel Track Saw and prevent dust blowing out of the arbor port. I designed it to use the saws own allen key…

Downloads
880
Likes
113
Rating
5
P
Printablesian123411

Dewalt DCS391 Circular Saw Holder/Hanger

i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back

Downloads
880
Likes
122
Rating
5
P
PrintablesJiltedGeek

DeWalt DWE7492-QS and DWE7491-RS tablesaw insert

Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…

Downloads
856
Likes
158
Rating
4.67
P
PrintablesTlustejHanz

Track saw rail clamp

Easy way to make a rail clamp from Parkside one-handed clamps. Fits Makita rail and others alike.

Downloads
855
Likes
172
Rating
4.56
P
PrintablesVioppoiv

Chainsaw Man Key Cap

Fits most mechanical key switches. PRINT SETTINGS: (I use a Flashforge Adventurer 3 Pro) Extruder Temp: 210C - 220C Bed Temp: 55C - 70C Layer Height: 0.12mm Print speed: 40mm/s Shells: 1 - 2 shells Infill: 15% Supports are optional NO…

Downloads
852
Likes
128
Rating
5
P
PrintablesWeststar42

Ryobi Circular Saw Mount for Multiboard

Mount for a Ryobi cordless circular saw designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. I significantly remixed and included the Ryobi circular saw wall mount by…

Downloads
833
Likes
152
Rating
5
P
PrintablesJeremyKMac

Track Saw Guide Rail Rack

I think I've worked out a pretty decent solution for a track saw guide rail rack that doesn't require any additional hardware. Every piece is printable with little or no supports. The only piece that I print with supports is the primary…

Downloads
827
Likes
182
Rating
4.88
P
PrintablesAlwaysTinkering

Remix Lindh3D Table Saw Push Stick with Grip

Same stick Lindh3D designed with a taller handle and grip imprints for a better grasp. Also added a thumb rest making it easier to push down with thumb pressure. I hang my push sticks within reach so I added a large hole to hang it by the…

Downloads
825
Likes
270
Rating
5
P
Printables3DDIY

Hand Saw Holder

A saw holder I made to hold my Japanese Hand Saws. Gravity and friction holds the saw in place with a help of a 1 and 1/8th Dowel. This holder can hold most Western and Eastern style hand saws. Dowel sizes around 1 inch can be used.…

Downloads
821
Likes
235
Rating
5
P
Printablesjohn doe

Stronger Saw - Cardboard

Minor variation to make this stronger than original.

Downloads
820
Likes
92
Rating
5

Milwaukee M18 7 1/4" Circular Saw Mount

This will securely hold an M18 7 ¼" circular saw and should work with most other brands as well. Update 2/10/23: A user has reported that the mount is too narrow for his M18 2732-20, it does it my 2631-20 and a few other people are using…

Downloads
820
Likes
132
Rating
4.2
P
PrintablesMr. Sullivan

Dewalt Track Saw Guide Adapter for 20v Cordless 6-1/2in Saw

This Dewalt Track Saw Adapter Guide allows you to use your 20v 6-½ in cordless saw with the full size tracks! *Use at your own risk* This design prevents the blade guard from recoiling to cover the blade. Also, typical track saws are…

Downloads
814
Likes
106
Rating
5
P
PrintablesChri81

Featherboard for Bosch GTS 10 XC table saw

A featherboard, suitable for the T-slot of the Bosch 10 XC table saw. Heavily inspired by the design of Zeropage, I modified some dimensions by 0,1mm - 0,3mm since the fit was too lose in the original models

Downloads
813
Likes
133
Rating
5
P
Printableshmpf

Saw guide with clamp feature - Schneidlade mit Schraubzwingenfeature

None of the saw guides I found on printables had a proper clamping feature, so I added my version which has 2 cutouts fit for small screw slamps. I use Bessey 100x50 clamps. Suitable for 1mm thickness saw blades (slots are 1.2mm wide)…

Downloads
811
Likes
411
Rating
5
P
PrintablesRasmus 3D

Milwaukee track saw dust cover

Dust cover for the Milwaukee M18 FPS55 track saw There is a version for hard plastik and also a version for TPU and other flexible materiel Both just snap in place No supports needed Print settings Pla Layer Hight: 0.2 mm Infill: 20 %…

Downloads
801
Likes
87
Rating
5
P
Printablesmaxmar

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Downloads
799
Likes
122
Rating
5
P
PrintablesDanzel

Chainsaw Wall Mount (STIHL 025)

Wall mount for chainsaws. Dimensions were specially created for the STIHL 025 model. But should also work for different models. Just check that the height of the bracket fits at a distance of 1.5 cm from the wall. Three 5mm countersunk…

Downloads
786
Likes
91
Rating
5
P
Printablesprntmkr

Magnetic Saw Guide - Simple & Precise

Intro Sometimes it is the most simple tool, that will help you the most. This is one of these tools… This tool will help you to hold a saw blade and by this to do a clean 90 degrees cut. Hold the tool by hand or use clamps. The saw guide…

Downloads
773
Likes
205
Rating
5
P
PrintablesCollisto

Miter Box and Saw

Simple 45 degree and 90 degree miter box and handle for hacksaw blade. These were made when I first got into 3D printing and were created or modified in TinkerCAD. Original Knife handle is taken from…

Downloads
771
Likes
81
Rating
4.86
P
PrintablesZax

Chainsaw 1/10 v2

Second version of Chainsaw 1/10 model modified for SLA printers.

Downloads
768
Likes
308
Rating
4.75
P
PrintablesChewey

Steel Sheet Holder with seesaw eject button mechanism for MK3/S

This is a “mildly” overengineered remix of Whity's excellent “slightly” overengineered Expandable Steel Sheet Holder for the MK3/S print sheets. The goal of the remix is to completely remove all connector pins from the eject button…

Downloads
766
Likes
188
Rating
4.93
P
PrintablesPRohles

Table Saw Fence Upgrade for Ridgid Table Saw

Not Affiliated with Ridgid. Fixes the slight wobble in the ridgid table saw fence before you clamp it down. It replaces the two white plastic parts on the bottom of the table saw. If you use it let me know! it's a work in progress. I…

Downloads
761
Likes
66
Rating
5
P
PrintablesPeter H

TABLE SAW BLADE ALIGNMENT JIG

With the use of a cheap digital tyre depth tread indicator, you can easily build a jig that will measure your tablesaw blade's runout to two decimal places of (insert your favourite unit of measure.) I'm not sure whether I have the skills…

Downloads
740
Likes
441
Rating
5