2,973 models
This is a wider version of a scissoring mechanism designed by Richard Swika on thingiverse Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 30% pick material wisely, Pla may break at handle
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
The PetG is recommended 0.2 layer height 10% infill You can insert a 3 X 10 mm nut/bolt in the joint in case you use PLA
Inspiration This design was inspired by a toy that my son had which was made very cheaply and broke much too quickly. Years later I now have a 3D printer and some CAD knowledge with which I was able to create a much more robust version…
This is the “Freight Ten” as inspired by my four “Mongruxx” Novels. It includes the articulated version. It can be printed as a stand-alone Freight Ten, or with the powered tailor. For all of you Sci Fy tread heads out there. Transport…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…
This is a “Fuel Tank.” Designed to be carried on a Freight Ten, the articulated Freight Ten Trailer version, or the Super Freight Ten. More cargo for all of you Sci Fy tread heads out there. Freight Ten…
SCI FY Cargo containers. Armoured, with bolts on the sides. Prepared for anything! Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff:…
Pour améliorer l'extraction des poussières de la scie circulaire Festool TS 55 EBQ, certains conseillent de boucher l'ouverture du carter qui sert à changer facilement la lame. Un peu de ruban adhésif suffit, mais c'est plus élégant et…
Pince pour bâche de piscine hors sol INTEX sur tube Diam 58 mm. Pour maintenir la bâche la ou elle baille. Imprimée en PTFE Buse 0,4 couche draft 0,3 mm 4 périmètres Pas de support N'oubliez pas de mettre un petit ❤ si vous avez aimé, merci
Two piece magnetic scissor holder, using 10x2mm round magnets. The two pieces interlock but should be glued together for best results. The magnets are intended to be glued in the recesses in the back. I used a gel superglue and the…
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
A simple box that looks like a storage crate from a science fiction movie. Pre-scaled to three sizes: 60mm, 90mm, and 130mm. Can be printed in separate pieces to accommodate multi-colored prints. No supports needed! Multi-color lids have…
To hold my scope probes so they don't clutter my workspace I made a clip that fits to the left-hand side of my Hantek DSO2D15 oscilloscope. Can be used for other scopes too, it fits the Hantek's PP150B probe and the P6100 probes commonly…
Steampunk Goggles specifically designed by Double Bass player Stjepan Horvat for band Scifidelity Orchestra ( Facebook , Youtube Channel , Instagram ) with their logo on the side of the goggles. Design for the lenses was inspired by…
Oscillating Triangle Sandpaper Holder: This is a remix of a design I found on Thingiverse. However, I completely redrew it and added the following: Increased wall thickness/rigidity from 1mm to 3mm Made stackable with posts on lid and…
This 3D Printable Scissors, as you might be wondering, does cut paper, as shown in one of the pictures that I have uploaded. But not close to as well as a real Scissors would. However, I made it as realistic as I could. I hope you enjoy…
Le diamètre du haut du panier est de 225 mm donc vérifiez taille de votre plateau d'imprimante. Un fichier Gcode spécifique MK3/S/S+ et PETG permet d'imprimer la partie haute du panier (anneau tronqué pour tenir sur le plateau de la…
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
Apart from the basic functions that you can expect from a quarter circle protractor: Measure angles Draw straight lines and right angles Find the center of small circles You can do most of the functions of a scientific calculator with…
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.
One-handed differential probe for two-channel oscilloscope with math function. With dual acupunture-needle handle holes for alternative or additional pins pointing to same probe tips center location. With adjustment screw, M3 hex nuts and…
A Scion FRS / GT86 / GR86 car badge keychain. Print with PLA or PETG for more durability. Color shift is included in the .gcode at 3mm. Ironing is also enabled to smooth out the top layer. .stl is included if you want to re-slice with…
Durable, kid-friendly, and perfect for any desktop or nightstand, this 3D printed piggy bank is a unique gift that will provide enjoyment while helping develop good financial habits. Its cute prints will look great displayed together in a…
I designed this tray to nicely store my Hameg Oscilloscope Probes. It will likely work with many makes of probes or you can modify it with the included fusion 360 file. It is stackable. You can experiment with different printer settings…
Fiskars Micro-Tip wall bracket to screw on the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA black Notes: There is no specific need. You…
Locks the probe in the 10x position saving the headache of having to constantly check.
najprostrze narzędzie do sciągania druku 3d
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Got tired of accidently pressing the AUTO button and decided to do something about it.
Replacements for the screw covers on the handle of TEK314 storage oscilloscopes.
I had the luck to visit Portland recently, and to my great joy (and even greater misfortune for my bank account), I happened to find the Saber Forge showroom, while looking for an Airsoft store. I ended up buying a premade Acolyte saber,…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
A vaguely sci-fi looking stand for 25 ml 30 x 60 mm flasks ( example ). It's supposed to resemble research vats. These glass containers are often dimensionally inconsistent. Added ribs should help with minor deviations, but I can't…
Modelle für den BlackRoll Booster um diesen als Massagestab zu nutzen. Inspiriert vom Original BlackRoll Booster Head habe ich ein Version erstellt, die für den 3D Druck optimiert ist. Unten findet Ihr die Daten für einen Adapter, einen…
Il s'agit d'une scie à onglet Metabo KGS 216 M. Le cache qui se trouve sous la lame et qui protège le laser et la lampe LED était cassée. J'en ai profité pour remplacer la LED OEM par un modèle plus puissant:…
The interior door "pull" on my Scion XB fell off when I attempted to pull the door closed. After years of wear, the screw hole in the bottom of the pull ripped out completely, leaving behind the screw. I created this insert so that I…
Remplacement des deux “poignées” permettant de déverrouiller le mécanisme d'ouverture du plan de coupe. La fichier stl est pour la poignée gauche, mais dans PrusaSlicer, il suffit d'appliquer une symétrie pour la poignée de droite. Vis M4…
Présentation du modèle : Cette valve anti-retour est conçue pour faciliter la vidange d’une piscine tout en empêchant le reflux d’eau dans le circuit. Vidange piscine, système de filtration et pompe à chaleur. Le système comprend trois…
Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…
Space-saving holder for the trigger point presses from Liebscher & Bracht. The presses are made for acupressure and pain therapy. My wife doesn't have a proper place to store them. That's why I designed this holder for wall mounting.…
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Garden grass bush scizzors replacement part
GUSCIO PER Scheda Magnetizzata Digicard Faac
Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing. Features: Threaded Screw Mechanism:…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 6 M3x25mm socket head fasteners, 2 Stainless…
Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
*UPDATED 12/27/2024: The “Fix Model” warning has been resolved. Safety first! Rule #3: Keep your finger straight and off the trigger until you are ready to fire. I scaled mine to 122% to fit my G.I. Joe Classified and Action Force gear.…
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
Print your own gothic sci-fi ruin city. Everything prints without support. Every level with a floor is separate with big pegs and holes to keep them aligned without glue. A quick and easy method for painting them:…
A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
Today, I want to share a design of one of my patrons with you - this awesome dice tower was created using the terrain lib, so now you have a dice tower that fits perfectly to your tabletop terrain. A big thank you to the original creator…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
A remix of the Large Scissor Holder for Skadis by MattBurt that fits the honeycomb storage wall by RostaP
One week after the initial release of the terrain generator, I published a big update. Many more options came in, like full buildings with all 4 sides (previously, only a corner ruin was possible). To give you some more buildings, I…
This is a model of the right gauntlet of the Predator gear. The gauntlet contains a retractable Wrist Blades and Scimitar Blade. I skipped any instruction video as this is rather simple assembly. Note: during the assembly insert the…
The Gömböc is a fascinating mathematical object with a unique geometric property: it has only one stable equilibrium point and one unstable equilibrium point. This means that when placed on a flat surface, it will always return to its…
Your scissors always in the same spot: grab them and put them back with one hand. A scissor holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
Uploaded authorized by the original modeler Indigenous Effects . Check him out. There are two options of covers: 1: Option cover etc… It is compatible with the swing set but are “plain”. (Yes the parts list photo is a little it chopped…
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
A simple yet beautiful science design inspired by the looks and vibes from the atomic-punk game - Atomic Heart Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some…
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
This is an OpenSCAD library to generate an ergonomic handle that distributes hand contact pressure as evenly as possible, for any size of hand. The dimensions in this model are based on several research papers using anthropometric data…
Commercial use is NOT allowed for this model
These sci-fi* weapons were designed from scratch for the Lucky 13 jointed figure by soozafone, though they may work with other action figures. They are borne of my own imagination, however they were clearly inspired by science fiction…
This is a Volcano with base for the Vinegar and Baking soda and dish soap experiment, I have included holes for TPU printable feet and Plug for the bottom (10-15% infill, recommend raft for TPU feet) . For the volcano, I printed it on the…
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
english: A Storage Unit for Gridfinity ( a System designed by Zack Freedman) which hold up to 6 scissors. Printed with Petg and 0.3 mm layer hight Deutsch: Eine Aufbewahrungseinheit für Gridfinity (ein von Zack Freedman entworfenes…
With the release of my first terrain library, I created some buildings for you. All buildings are split by the different floors so it's much easier to print. These files are available for commercial use for several of my patreon levels,…
I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Simple but very cute scissors-shaped earrings. Degli orecchini a forma di forbici, semplici ma molto carini.
Design update: added thickness and a fillet to corners to help with thin prints. This 5x1x5 tray has two compartments, each designed to securely hold a pair of scissors. The compartments are deep enough to prevent the scissors from…
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
This one took me way longer to make than I thought it would, but it was totally worth it! Step file is meant for a color change at 4mm high, but you can also take the SVG or DXF and make your own, several slicers support that now. If you…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
Not to be confused with the 1500 Megawatt Aperture Science Heavy Duty Super- Colliding Super Button. This version is going to be deprecated by the end of July, but it will also come with the full tutorial for added features and simpler…
This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…
Water jet for a tubular pool to be fixed onto a bar (maximum bar diameter 60mm) and connected with a hose to the pump outlet. The hose used is the one provided with a classic hydraulic robot. The water inlet diameter is compatible with…
This dice tower is basically an update of this design: https://www.printables.com/model/372738-scifi-gothic-dice-tower Since there were complaints that the dice do not go through, I decided to increase the openings a bit to make them…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
Got some the of the "on sale" oscillating blades at Home Depot and wanted a good way to store them. Made a couple of different ones for different brands. Got the pin model from…
Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…
A compact holder for Scissors for the Skadis peg board system - for use with slim scissors For holding thicker scissors, see: https://www.printables.com/model/281597 No supports required Requires the Universal Hook by CSD_Salzburg:…
