486 models
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Utility Carabiner: Secure and Versatile Clip for Everyday Use Product Description: The utility carabiner is a versatile and reliable accessory designed for everyday use. Featuring a pre-tensioned mechanism, it stays securely closed…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…
Print approx. €7.13–€8.72 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Adapter verbindet die BOSCH GEX 18-125 oder GEX 12-125 Exzenterschleifer sicher mit einem HT-Rohr DN50. Einfach aufstecken, um 90° drehen, fertig. Ideal zur effizienten Staubabsaugung in der Werkstatt. This adapter securely…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
With the introduction of our puppy, we quickly realized that he wanted to pull the wicker boxes out of the furniture. Rather than store the boxes overhead away from his reach, I designed this simple system to prevent the boxes from being…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Der Ultimative Filament Clip: Snap & Secure Dein Filament! Bist du es leid, dass sich dein Filament auf der Spule löst, verheddert oder unordentlich wird? Unser Snap & Secure Filament Clip ist die perfekte Lösung für jeden…
The air tag secure holder is compatible with the key ring. Tested in PLA and ABS, works properly! 0.2 layer, support not needed. Ask for any questions. Check my other models: https://www.printables.com/model/1149589-air-tag-secure-holder…
STABLE AND SECURE: Improves adhesion and stability on any surface, prevents canister from wobbling or tipping over. The stand fits for 90mm and 110 mm gas canisters, so you can use it with any camping stove. There are two versions to…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
Stop the original metal hooks from falling down and ratling around. Use the 3D printed hooks for even more securely fastened hooks as well as to spice up the colors on your Skadis board. The included tool allows for quick and easy removal…
TLDR: Use this clip system to very securely attach elements to your Skådis / Uppspel pegboard. This design securely prevents lifting as well as downward and lateral forces and can be paired together for larger heavier objects. Design…
I printed this in Red ABS for gifts to my senior friends who are always dropping their picks. Ha. It will stand on the bedplate on its back end and print well. I then hung it in a jar for a while with Acetone until shiny and smooth. It…
If you need to paint or finish a part, paint cones are a must. They hold your part above the surface. They allow you to hold a wet part without marking it. They can hold spherical parts in place and stabilize complicated shaped ones.…
Easily printable without support and attaches to a European style tow bar with a ball of 50mm. Color can be printed by manually changing filament while pausing print at specific height or in a Tool Changer, MMU or other multi material…
When I am running, sometimes my AirPods Pro are falling, so I have designed this ear holder. I have added 7 different sizes. Print it with support (for the arm) in some flex materials like TPU. You can print in PLA or PETG but it is less…
Use case This design was originally done to fix my company ID cart to my trousers at work. I needed to be sure that I do not loose this card, so I decided to come up with an own design that is securely lockable. Feel free to use it for…
Hello everyone, I’ve designed a handy child safety lock for caravan windows and wanted to share it with you. This lock is specifically designed to prevent children from opening the windows on the bunk bed, ensuring extra peace of mind…
If your extruder keeps stopping mid print and seems to magically start again after docked, most likely the cable is coming loose. Over time, the cable connector will slowly back out of the dwarf-cover-base and put strain on the white plug…
So, this isn't exactly some super innovative concept BUT if you are one of those people who aren't exactly fans of tying shoelaces, have a 3D printer (or access to one), and have some TPU filament...This thing is for you! My major focus…
Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…
This is a printable adapter for your shopvac hose that you can add to a project No supports required Can be scaled up or down as needed - designed to connect to my dewalt shopvac here is a video of it in action
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
A friend asked for a hot wheel dual track with 8 mm spacing for Monster Trucks. Inspired by https://www.thingiverse.com/thing:1797697 (thanks!) Added a latching mechanism (with a single button) Added rails on the top side to minimize…
A carabiner with a spring loaded locking mechanism. My first 2 versions of a locking carabiner was with a screw, but it took too long to open and close. As these plastic carabiners are not ment to handle large loads like of a person, the…
This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…
A very secure bag clip to close any opened bags. The hinge is designed with low tolerances to ensure a secure fit, and prevent any loose feeling parts. Clip surface is recessed for enhanced grip. The two notch design makes sure that the…
Lockable Milwaukee M12 Battery Holder – For Upside-Down Mounting & Shaky Environments Keep your Milwaukee M12 batteries secure, even in harsh or mobile environments, with this lockable battery holder designed for professional use in work…
Secure-Snap Cardboard Spool Ring for QIDI Box - various diameters 3mf is the QIDI Studio Project for ASA (smooth plate) The Problem If you use cardboard spools in the new QIDI Box, you know the struggle: most adapter rings rely on a…
A flat holder for 6 SD cards. Each card is held in place by a flexture latch that still permits easy insertion and removal. Cards can be inserted in any orientation and still remain secure. The flexture also holds micro SD cards in their…
This is a remixed wall mount for air tools. The original (https://www.thingiverse.com/thing:5071780) was great but some of my thicker tools wanted to jump out when I walked by them. The slot is now slanted with a bump at the end so they…
Sport add-on to the AirPods 4s, I will be coming out with more generations soon(mostly the newer ones). Place the AirPods in, mayweed to clean the inside of the hole, it works, if all else fails, with proper precautions, grab a lighter,…
#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out” https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots A quick and easy to print microSD card holder for the Steam…
Presenting the Wyze Doorbell V2 Cover – a minimalistic yet secure solution for enhancing your doorbell's functionality. This 3D-printable cover seamlessly integrates with the original mounting hardware, ensuring a snug fit while…
I designed this holder so that my 3/8" Impact gun can stay secured while I travel up and down the roads and move my Pit Kart around the pits. He has a nice snug fit and enough side height to keep it stationary on bumpy roads. Hope it…
A mount for a Garmin Varia radar to a saddle bag. I added a slot under the Garmin mount plate for a wire tie around the whole thing to make it extra secure. The downside is that you need longer screws than the ones that come with the…
Easily attaches to the Bambu Lab PS1,P1P & X1 3D printers and provides a compact waste or ‘poop’ collection solution. Strong magnets used are: Q-25-06-02-SN Block magnet 25 x 6 x 2 mm, heat-resistant, holds approx. 1,7 kg from…
A completely new design Air Tag secure holder compatible with a key ring. Tested in PLA and ABS, works properly! 0.2 layer, support not needed. If you have any questions or doubts, please contact me! Please leave 5 stars if you like it…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
No support, PETG Print as many as you need to organize garden hoses. Screw the Secure Hose Holder MAIN to the wall, place the Cover on top, and press until you feel resistance from the hose. Designed to connect together for a vertical…
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the…
This AirTag case is designed for secure attachment with a reinforced hole, allowing you to hook it onto any item with ease. The internal fit ensures your AirTag stays in place, while the grooved pattern provides an enhanced grip. The case…
Holds your controllers reliably and securely. Can print the all-in-one “One Piece” model or print the mount and HSW insert parts separately (and glue them together). It doesn't look pretty, but good luck knocking a controller off…
This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…
The clips will push into the aluminum work surface used on the Snapmaker machine when set up for work with laser. One side pushes against thick work, the other will hold down paper or cardboard. I found the rubber pieces that Snapmaker…
Holds a hammer, remixed from citizen458931's hammer mount but adds some extra supports and a front lip to ensure the hammer doesn't fall. My hammer is pretty high up and near my printer, so wanted to make sure this was extra safe. Uses…
Do you want to tow a cool model behind your car instead of that old protective cap you keep loosing? Then this is for you! The final model will stay in place however bumpy you drive, even a folkrace. It will shatter before falling off, so…
🚗 Practical Design: Our unbranded 3D printed cup holder divider is specifically designed for Volkswagen MK 6 / Golf 6 models. Crafted with precision and simplicity in mind, it seamlessly fits into your car console to keep your drinks…
Orignal Model with lots of size options. https://www.printables.com/model/1218292-mini-pocket-slide-box-5cm-7cm-9cm-h15cm I made this for pill holding for a family member with the size in mind to slip in jeans watch pocket and to make it…
🔥 BIC Secure‑Grip Lighter Sleeve 🔥 A print‑ready sleeve optimized for any 3D printer—no supports, minimal filament use, and gentle overhangs. Its compliant walls adapt to slight size variances across Bic Classic, Bic Classic Push, Bic EZ…
A hook to secure the Thule Omnistor storm strap set. It prevents the storm hook from slipping out of the locking point.
Added notches to the pins and cogs to make the cogs turn more securely. I also made the handle thicker. This often was the cause of failure on my print. Added a spacer on the handle to make the turning smoother. Made the ledge on which…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
I like to think of filament pulling as effortless. But when it is easy, the filament tends to slip off the spool and risks getting stuck on the central axis. That's why I adapted the two-roller system to the Prusa Core One's side…
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…
This is a modification of the OEM Creality CR-10s Pro fan duct. The original fan duct has a crazy thin tab where it attaches to the fan, and it breaks very easily. I thickened that. It also has a slant to the bottom which makes for…
The main wallet body can be printed in your preferred material e.g. PLA but ASA or PETG is recommended. The side springs and money retention springs should be printed sideways and in a flexible material (ASA works best). The other parts…
Objective Tokens for Marvel Crisis Protocol Secure/Extract 25mm diameter 3mm height Change filament at 2,20mm
This AirTag mount was designed with security in mind to withstand attempts of removal. Combined with screw locks you will have a ridgid, light and secure tracking solution for your beloved bike. UPDATE: added cover designed for ruthex m2…
I own a SUNLU Filament Dryer S4 and while it's great it has a known flaw. When a spool gets light or is half-empty it tends to jump off the original track and block itself. This risks failing the print and is just generally frustrating. I…
Just a small container to clip to your backpack. Securely fits some smokeware and a specific type of lighter. Threads have some tolerances - should be easy to print
After dual-Z upgrade for my Ender-3 (non-pro), I wanted to move the PSU. Tried few existing designs, but all had some downfalls, so remixed this to make is secure. https://www.thingiverse.com/thing:3304804 - This slides into extrusions…
I liked the idea of original Pegboard Glove Clip model, but the peg on it was too thick and required some cutting to make it fit. It also pivots and pulls away from the pegboard when you pull the clip out to slide your gloves in. This…
This can be used to mount the standard stepper motor drivers on standard DIN Rail. I fixed the issue of having to tap holes in similar DIN rail mounts by adding space to embed hex nuts. Works for the following STEPPERONLINE Models: DM542…
Got tired of the filament rolls falling off the holder on my Ender 3 v2. Made this filament holder to fix that problem. Fitted two 608zz-bearings inside to make it turn really smooth. Depending on how tight you fasten the front holding…
I wanted a very sturdy shelf and dimension'd it around my binos. I made some design choices around the printability such as the slope in the front retaining wall not requiring any supports. This model printed best with a 0.6 print head in…
Securely holding the bearing @@ omgwowbbq
A beefy control horn (mainly for flying wings) that needs no Loctite to keep the linkage stopper in place. I needed a horn that would stop the little nuts from eventually flying off, and even though I use Loctite, sometimes the nut would…
Designed to prevent the extruder cables from sagging and running into large prints. Printed/installed on an MK3S+ @ 0.2 QUALITY with PETG. I recommend printing it vertically with a brim. Requires (2) M3x8 screws for mounting. (M3x10…
Allow me to present my innovatively crafted pill organiser. This meticulously designed box features seven spacious compartments, seamlessly aligning with each day of the week through the use of discreet yet robust magnets. The secure…
This Bowden tube clip gets rid of the loose fit the original clip has at the extruder. My Ender 3 v2 had a lot of play at the fitting so I found a model that is designed to fix it. It worked very well but I had a lot of issues printing it…
Quick remix i made to make the mount a little more secure. i didn't like how the front flexed, especially since i was using a heavier insta360 camera. THIS ALSO MAKES IS MUCH MORE DIFFICULT TO GET OFF so i wouldn't plan on taking it on…
This is a modified design to the https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2 that allows the user to use anything from rope (up to 0.25" diameter) to elastic bands (up to 1 inch) to cloth/nylon webbing (up…
If like me you are tired of using cable holders that do not allow to use ticker fast charging cables or that your cable is always falling of the slot, this is the solution for you. To start, I may do smaller sizes, you have 5 slots with a…
Convert any M3 screw to a thumb screw with this print. A M3 nut is used to secure the screw in place. There is also a slot to screw it with a coin, etc.
I made these years ago inspired by other wrench organizers that I saw, but I wanted to be able to carry the wrenches without concern for them falling out or the retention strap coming loose. Added extended clips to accommodate wrenches 8…
Keep your SIM and Micro SD cards secure and organized with this premium protective case. Designed with durability and portability in mind, this compact case features a textured screw cap for a secure grip and an easy-to-open mechanism.…
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
Tired of towels constantly slipping off your bathroom radiator? This easy-to-print, snap-on towel hanger is the perfect solution! Designed to fit radiators with 20mm pipes and 20mm spacing , this hanger ensures your towels stay neatly in…
Needed to use the 30 degree wedge for my installation, but wanted to also use the security cover design. I remixed the bottom mounting frame with so that it mounts 30 degrees offset. I use 3mm heat inserts for the two small holes on the…
This is a completely new AirTag Secure Holder! It's a new shape for your AirTag | 0.2 layer, so support is not needed! You can print it in many colors and materials! I tested it in PLA and ABS. If you have any questions or doubts, please…
📦 Prusa Tool Box Inserts – Secure Sorter 🧰 Keep your Prusa accessories organized and secure! These two custom inserts are made for the Prusa Tool Box V2 , compatible with MK4S, MK4, XL, MK3.9, MK3.5, MK3, Mini+, and Mini printers. They…
This is roughly inspired by a "SlipKnot Adjustable Rope Clamp", but is able to fit over a knot in the rope instead. Think of it like a fortified/inflexible inline knot in the rope. I am using this to limit the travel of a rope through…
I never liked how loose traditional pegboard hangers are. I was inspired by David Warboss's Pegboard system hangers that use keyholes instead of round holes, similar to how boltless shelving goes together. Most pegboards are designed to…
Sturdy case for Orange Pi Zero microcomputer Print instructions I just got a new Orange Pi Zero , the $10 ARM microcomputer. So I had to create a case for it, of course. Based on popular demand, I also added case for version with the…
This secure benchy holder can hold up to eight benchies. It locks on to them so they don't fall out easily. The screw holes are perfekt for 4mm Spax-Screws, others will likely fit as well. Printed in PETG, PLA should work as well. Up to…
Short Story: My doorbell camera didn't quite give the view that I wanted, so I found a model that covers the microSD card slot and modified it with a 12° downward angle to give a better view of the porch in case packages are left there.…
Halterung für Brennenstuhl Secure-Tec Steckdosenleiste Category: Household
Man. Those Proline Secure-Loc Caps are really expensive! Good thing you can 3D print your own. I've made two versions. The first one is compatible with a 7mm M4 threaded heat insert The second one has a 4mm hole that threads directly on…
Joy-Con 2 Secure Grip – for Drag x Drive is a custom grip attachment designed for the Joy-Con 2 of the Nintendo Switch 2. It was created to make the wheelchair basketball game Drag x Drive , which utilizes Joy-Con 2’s mouse input, more…
My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…
UPDATE 1 (04/06/23): Added an optional (parametric and .stl) jar model. A test ring is now included in the main parametric file to test your measurements. UPDATE 2 (05/06/23): Fixed an issue with the parametric jar model. Added premade…
This is a custom-designed protective shell for the Kodak Chamera (Mini Camera). It is designed to fit the camera's dimensions perfectly, offering protection against bumps and scratches. Key Features: Secure Locking: Features a built-in…
This is just a clip to be used in SCS accessories. I didn't see a clip anywhere so here it is.
Ein Kabel-Clip mit zusätzlicher Sicherung in den mehrere Kabel passen mit der Möglichkeit einer Schraubbefestigung.
Used QiDi ABS with default .20mm standard profile in QiDi studio.
