Search results: sg10

Sort order

236 models

10" Rack mount for TP-Link TL-SG108PE Switch

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Downloads
1,859
Likes
194
Rating
4.78
P

TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…

Downloads
1,447
Likes
108
Rating
5
P

TP-Link SG1005P | SG105 10-inch Rack Mount

A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…

Downloads
1,095
Likes
89
Rating
5
P
Printablesowlish

TP-Link TL-SG108/SG608E 10-inch Rack Mount

This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…

Downloads
1,093
Likes
102
Rating
5
P
PrintablesCeleste

Celeste's 10" rackmount panel V.1 for TL-SG108

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…

Downloads
773
Likes
114
Rating
5
P
PrintablesBlenderBender

TP-Link SG105 10 inch rack mount

This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…

Downloads
724
Likes
64
Rating
4.5
P
PrintablesM. H.

TP-Link TL-SG108 8port switch mounting bracket

Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.

Downloads
680
Likes
68
Rating
4.7
P
Printablescalipsoii

TP-Link 1U rackmount housing for OC200 and TL-SG1005P

Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…

Downloads
555
Likes
43
Rating
5
P
PrintablesKIL0

TP-Link TL-SG105 mount

Mount for TP-Link TL-SG105 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Downloads
540
Likes
47
Rating
4
P
PrintablesKIL0

TP-Link TL-SG108 mount

Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Downloads
524
Likes
36
Rating
4
P
Printablesnerdybrew

10" Rack mount for TP-Link TL-SG108PE Switch no front logo

just removed the front logo because I could not get it to print cleanly.

Downloads
437
Likes
35
Rating
5
P
PrintablesDiew

10 inch rack TP-Link ER605 - SG108

How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…

Downloads
416
Likes
53
Rating
5
P
PrintablesFloKun

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Downloads
416
Likes
41
Rating
5
P
PrintablesDiew

10 inch rack TP-Link SG2210P - SG2008 - SG105-M2

It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…

Downloads
415
Likes
45
Rating
5
P

TP-Link TL-SG108(PE) | SF1006P 19-inch Rack Mount

A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…

Downloads
413
Likes
42
Rating
5
P
Printablesandyshinn

TP-Link TP-SG108 Switch Mounting Bracket

A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.

Downloads
403
Likes
64
Rating
5
P
PrintablesCuntan Marius

GBB or SSG10 A3 handle grip

Remix of AR15 grip to fit the GBB or SSG10 a3 handle. Just measure your mount, it should be around 10mm (check the attached picture) Category: Toy & Game Accessories

Downloads
373
Likes
43
Rating
5
P
PrintablesCeleste

Celeste's sturdy 10" rackmount panel V.2 for TL-SG108 and TL-ER605

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…

Downloads
351
Likes
21
Rating
5
P

TP-Link SG1005P | SG-105 19-inch Modular Rack Mount

A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…

Downloads
327
Likes
34
Rating
5
P
Printablesjnr0790

TP Link TL-SG105 Mounting Plate

This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…

Downloads
322
Likes
22
Rating
5
P

TP-Link TL-SG108S-M2 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…

Downloads
315
Likes
40
Rating
5
P
PrintablesAngel Rivas

U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-SG105

UPDATE: 25/02/2025 I have updated the design, to compensate for the MicroSD card in the Raspberry Pi, and also adjusted the end of the router back to fix some occasional XYZ errors while printing. U1 10" Raspberry Pi 4 and TL-SG105 Rack…

Downloads
307
Likes
38
Rating
4
P
Printablesn3bulus

Rack mount for Omada router ER605 & TL-SG108PE

Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…

Downloads
303
Likes
22
Rating
5
P
PrintablesDanielmaxsteel

TP Link TL-SG105 under desk mount

I designed this holder for mounting the TP-Link SG105 under my height adjustable desk. I used 2xM3 screws with fitting nut and 2x M3,5x16mm wood screws. I placed the nut inside the Screw-Terminals of the switch and fastend the screws…

Downloads
302
Likes
40
Rating
5
P
PrintablesCaptainAl

1U TP-Link SG108 (all variants, E or PE) 10" rack mount

There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…

Downloads
297
Likes
41
Rating
0
P
PrintablesJascha3D

TP-Link TL-SG105 10-inch Rack Mount

TP-Link TL-SG105 10-inch Rack Mount 🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack! This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying…

Downloads
295
Likes
27
Rating
0
P
PrintablesReini

TL-SG108E DIN Rail (Hutschienen) Mount (FreeCAD)

The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…

Downloads
285
Likes
19
Rating
5
P
PrintablesBak3

tplink tl-sg105 1U rack shelf

1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height

Downloads
283
Likes
50
Rating
0
P
Printables<Charlie_root>
Downloads
281
Likes
19
Rating
5
P
PrintablesTdewulf

TP-link TL-SG105 mount

Wall and ceiling mount TP-link TL-SG105 made in thinkercad 3mm thick walls

Downloads
271
Likes
16
Rating
5
P
Printablesbryanpryor

Bracket for TP-Link TL-SG108 Network Switch

Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.

Downloads
267
Likes
37
Rating
5
P
PrintablesThoreB

10" Switch Rack Mount (TL-SG108PE)

10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…

Downloads
264
Likes
31
Rating
4.67
P
Printablest0b1

Hanger for TL-SG105 network switch

Wall mounting bracket for our TP-Link TL-SG105 network switch.

Downloads
264
Likes
23
Rating
5
P
PrintablesBasti.mp4

TP-Link SG105E 10" Rack mount

Little remix to mount a TL-SG105E in your 10" Rack. You have to remove the two little screws under the switch. After that you have to slide the switch in the mount until its flush with the front. The last step is adding two M3x6mm screws…

Downloads
257
Likes
18
Rating
5
P
PrintablesFunky Dysfunc

TP-LINK TP SG1008 Wall Mount

Wall mount for a TP-LINK SG1008p network switch allowing it to be slid in and out from the top. Switch will need the sticky feet removed to face the other way from the picture. Needs supports. Print Settings Printer Brand: Creality…

Downloads
255
Likes
23
Rating
5
P

TP-Link SG1005P | SG105 | OC200 6-inch Rack Mount

A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…

Downloads
254
Likes
22
Rating
5
P
PrintablesDrTob

Wall Mount for TP-Link TL-SG1005P PoE Switch Power Supply

This is a 3D printable wall-mount bracket designed specifically for the power supply of the TP-Link PoE Switch model TL-SG1005P. It offers a straightforward solution for mounting the power supply under tables, on walls, or any preferred…

Downloads
225
Likes
13
Rating
5
P
PrintablesSpeeter

TP-Link TL-SG105 mount for IKEA SKADIS

An easy way to mount you TP-Link switch to the SKADIS pegboard

Downloads
215
Likes
20
Rating
5
P
PrintablesCeleste

Sturdy 10 inch rack mount for the TL-SG105E consumer network switch

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…

Downloads
211
Likes
36
Rating
5
P
Printablesflyingtoaster0

Mount for TP-Link TL-SG105 Network Switch

This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…

Downloads
198
Likes
13
Rating
5
P
PrintablesHenri S

tp-link TL-SG105PE Switch 10 inch rack holder

You need zipties for the power brick. The switch slides into the mounting brackets and locks itself in place. There is also a version for 19 inch racks:

Downloads
186
Likes
30
Rating
5
P
Printables7FM

TP-Link TL-SG108 Switch Mount

This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…

Downloads
182
Likes
13
Rating
5
P
PrintablesDiew

10 inch rack TP-Link OC200 - SG105

remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.

Downloads
175
Likes
9
Rating
0
P
PrintablesKevinC3

TL-SG108-M2 Switch Mount for 10" Rack

Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…

Downloads
171
Likes
8
Rating
0
P
PrintablesiKlaus

TP-Link TL-SG105 Skådis Mount

Mount for TP-Link TL-SG105 Switch on IKEA Skådis pegboard

Downloads
170
Likes
14
Rating
5
P
Printablesmtominsk

TP-Link TL-SG108 holder for Ikea Skadis Voronoi Style

I had some fun do design this one. This might be the reason why it looks a little “fussy” :) I love the voronoi style, not just because of the optics but also to save material at printing. Donations are welcome and helping to keep my work…

Downloads
152
Likes
19
Rating
4
P
PrintablesTapRackBang

Meross MSG100 Smart Garage Door Opener Mount

Simple mount to for a Meross MSG100 smart garage door opener. I added a spot on each end so that I could zip tie the cables as a strain relief mechanism.

Downloads
150
Likes
25
Rating
5
P

TP-Link TL-SG105-M2 2.5G 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings…

Downloads
147
Likes
12
Rating
0
P
PrintablesKaosuNeko

Tenda SG105 Gigabit Ethernet Switch DIN rail mount

Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…

Downloads
144
Likes
18
Rating
0
P
PrintablesPeter Martin

TP LINK SG108 Gigabit Switch Wall Mount

TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.

Downloads
142
Likes
9
Rating
5
P
Printablesidcrook

10" inch 1U rack mount for side-by-side Raspberry Pi 4 and TL-SG105E Ver. 3

Wanted to use in my 10-inch rack setup since I need the extra space under the Pi for an errant tall PoE HAT in a 1U rack below where this rack will be installed. I subtracted some of the material from the print model surrounding the…

Downloads
142
Likes
8
Rating
0
P
Printablesottk3

TL-SG105 Screwable Mounting Plate

Mounting Plate for TP-Link TL-SG105 switch. Material: PLA+ Infill: 20% Support: Touching Buildplate

Downloads
141
Likes
7
Rating
5
P
PrintablesTRIMAGIA

tp-link TL-SG108E 10-inch rack mount

3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.

Downloads
137
Likes
31
Rating
0
P
PrintablesEvandro Assis

Switch TP-Link SG1024DE mount

This is a design allowing to mount TP-Link SG1024DE switch on a wall or table. It is designed in 3 different parts, one on the left and one on the right that are screwed onto the switch, the 3rd piece serves both sides and works as a…

Downloads
136
Likes
19
Rating
5
P
PrintablesGiorgio

TP-Link TL-SG1005D switch backplate

Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…

Downloads
130
Likes
5
Rating
1
P
Printablesmaciek18339

TP Link SG105 mounting bracket

This mount is easy to print, resource friendly and reliable. There is no need to use two handles. But it can certainly add grip security. You can use doublesided tape/something else to make it REALLY tight. I'm recommending PET-G or ABS…

Downloads
128
Likes
21
Rating
5
P
PrintablesDespairFlare

TP-Link TL-SG105 Wall Mount - Renter Friendly

This is a renter friendly wall mount designed for the TP-Link TL-SG105 5-Port Desktop Switch. Add 3M Command Strips (or something equivalent) to the back of the mount, put it on your wall, and hook the network switch onto it. Printed in…

Downloads
128
Likes
8
Rating
0
P
PrintablesS. Vourc'h

TP-Link TL-SG1005D - Support for wall ou desktop mount

This is a support for wall or desktop mount for the TP-link TL-SG1005D, works well and tested on a real router. Printed for test on Creality Sermon V1 PRO, low quality (0,28mm) with supports but might work without supports also (not tested)

Downloads
126
Likes
3
Rating
5
P
PrintablesSwampy

TP-Link TL-SG105 Cable Bracket

Update 11/18/2024: I have added a version with larger openings for round cables. This is a quick little cable bracket for the TP-Link TL-SG105 5 port ethernet splitter/switch. Bracket will snap or slide into place on the unit. It allows…

Downloads
125
Likes
21
Rating
0
P
Printablesbatonikleonardo

TP-LINK TL-SG105 rack10 mount

Rack10 mount for switch TP-LINK TL-SG105

Downloads
121
Likes
21
Rating
0
P
PrintablesR2D2D2

TP-Link 8-Port Desktop Switch Mount (TL-SG108)

I wanted to mount my TL-SG108 Desktop switch under my desk to use the space better but the mounting channels are meant for walls. i designed these brackets to be as unobtrusive as possible and hold the switch securly upside down.

Downloads
117
Likes
12
Rating
5
P
PrintablesFinkerton

TL-SG108 Rackmount Pin_Clips

To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.

Downloads
117
Likes
10
Rating
5

TP-Link 1 Gig Switch 8 port Model number: TL-SG108E

A simple mini rack slot in for TL-SG108E TP Link switch

Downloads
117
Likes
7
Rating
5
P
Printablesnzt2afrb5e3y

TP-Link TL-SG1008P HSW/wall mount

considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…

Downloads
116
Likes
7
Rating
0
P
Printablesmaggoh

TP-Link TL-SG108 Network Switch mount compatible for ikea pax (32mm grid)

TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)

Downloads
113
Likes
25
Rating
0
P
PrintablesUwUTastisch

10inch Rackmount, TP-Link LS108G, TL-SG108 and 2 Keystones, FreeCAD

I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…

Downloads
111
Likes
18
Rating
5
P
PrintablesiahiMsogarD

Tplink TL-SG105E Rack mount

Print with the wing on the bed.

Downloads
109
Likes
12
Rating
0
P
PrintablesVulcansHammer

TP Link TL-SG1016PE Rack Mount Ears

Rack Mount Ears for TP Link TL-SG1016PE switch Fits 19" rack I used 4x M3 screws with washers to install. Prints without supports, more infill is better.

Downloads
107
Likes
11
Rating
5
P
Printablescloudybasement

Skadis - TP-Link TL-SG105 Network Switch

Bracket to hold a TP-Link TL-SG105 Network Switch on an IKEA Skadis pegboard using the built-in keyhole mounts.

Downloads
104
Likes
11
Rating
3
P
PrintablesPaco

SSG10A3 front rail

A front picatinny rail for the Novritsch SSG10A3, or the MLC-S2 Skeleton Stock from maple leaf in general. Also added the .f3d (Fusion) file, in case someone wants to remix for example the base of the model. I printed it on my prusa…

Downloads
104
Likes
3
Rating
0
P
PrintablesThor Sten

TP-Link SG1005 vertical mount for DIN rail

better solution for mounting a network hub SG1005 in vertical position

Downloads
103
Likes
4
Rating
0
P
Printablesklein_walke

Lab Rax - 10" - 1U - TP-Link_TL-SG108E

---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…

Downloads
102
Likes
24
Rating
4
P

TP-Link TL-SG105-M2 2.5G 19-inch Rack Mount

A 2 part modular 19-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…

Downloads
101
Likes
7
Rating
4
P
PrintablesDirk55555

Switch under -desk mount for TP-Link TL-SG1016D 16 Port Switch Halterung unter Schreibtisch

Designed to attach to the underside of a desk, for TP-Link TL-SG1016D 16 Port Switch. Print two pieces Unter Schreibtisch Halterung für einen TP-Link TL-SG1016D 16 Port Switch. Zwei Stück drucken

Downloads
99
Likes
5
Rating
5
P
PrintablesJesse Schauer

TP-Link TL-SG108E Mount for Leviton Structured Media Center

A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…

Downloads
99
Likes
10
Rating
0
P
PrintablesBrandon

TP Link SG108E Desk Stand

Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…

Downloads
98
Likes
22
Rating
4
P
PrintablesConstantin.B

TP-Link TL-SG105 5-Port Switch Halter

Meine Empfehlung ist denn Halter mit 20% zu Drucken Wird mit 2 3mm Schrauben an eine Holz platte angeschraubt.

Downloads
97
Likes
9
Rating
4
P
PrintablesLerry

TP-Link TL-SG108 Rack Mount

This is a 1U mount for the TP-Link TL-SG108 8 port switch, but I suppose it will hold anything that fits this opening. Dimensions ( W x D x H ) 6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm) The idea is the pins hold the wings in place as well as…

Downloads
95
Likes
5
Rating
0
P
PrintablesCeleste

Celeste's sturdy 10" rack-mount panel V.2 for TL-SG105 (-E)

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks .Notice ℹ This mount also fits the…

Downloads
92
Likes
9
Rating
0
P
PrintablesJonas Wallen

Tp-link SG108-Mount remix

A remix of an already good model. Changes. 1. Adjusted the height on the inside as my switch was 25.8mm high. 2. Added radius on the ventilation slots on the side to reduce the bridge when printing it standing on the front. 3. Added…

Downloads
88
Likes
6
Rating
0

1U TP-Link SG108 v2, 10" rack mount

Adaptation of the original print for a TP-Link SG108PE v2

Downloads
87
Likes
13
Rating
4
P
PrintablesMixmeister

TP-Link SG108 - 19 inch Rackmount modular

Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx LikeAZanda @Mauker

Downloads
87
Likes
15
Rating
5
P
PrintablesEunoseer

tp-link TL-SG108-M2 switch bracket

I recently purchased a tp-link multigig switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket is split into to halves to be…

Downloads
86
Likes
3
Rating
1
P
PrintablesMrGreaterThan

Meross MSG100 Smart Garage Door Opener Mount

Wall mount for the Meross MSG100 smart garage door opener. Most 1 1/2 screws should work for mounting. You may need to use a brim to print this.

Downloads
84
Likes
8
Rating
0
P

TP-Link TL-SG1008D V5 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG1008D V5 switch. Same version as reviewed here: https://www.servethehome.com/tplink-tl-sg1008d-review-unmanaged-8port-gigabit-switch/ This mount comes in two variants, one for the plain switch,…

Downloads
83
Likes
7
Rating
5
P
PrintablesBlaahen

TPLink SG105 vertical stand

Vertical stand for the TP Link SG105 switch. If your printer is perfectly accurate this should be a decently tight fit. Very stable with a small footprint. Also included a cut out notch as it appears the SG105 has air vents on the sides…

Downloads
83
Likes
16
Rating
5
P
PrintablesPandalism

10in Mini Rack Adapter for TP-Link TL-SG108S

Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…

Downloads
80
Likes
14
Rating
0
P
Printablesyahbluez

TL-SG108E under shelf mount TP-LINK

collection https://www.printables.com/@yahbluez/collections/518691 Needed an under shelf mount for this small switch… …used FreeCAD to make one. (Feel free to use the included CAD file to make and sell your own. licence: GPL v3) Picture…

Downloads
79
Likes
5
Rating
0
P
PrintablesTFro3

Wall Mount/Shelf for Mini server rack - TP Link TL-SG108 and Raspberry Pi

This is just a simple wall mount/shelf for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I printed with 25% infill in PLA and seems to be plenty sturdy. I made it more on the…

Downloads
77
Likes
31
Rating
0
P
PrintablesJamesBowyer

TL-SG1005P 10 inch rack mount

10 inch TL-SG1005P rack mount

Downloads
75
Likes
4
Rating
0
P
Printablesdimas_art

TP-LINK TL-SG108E Holder

A custom-designed wall or desk mount holder for the TP-LINK TL-SG108E 8-Port Gigabit Switch. This holder securely fits the device, ensuring stable placement and easy access to ports and LEDs. Ideal for organizing your networking setup at…

Downloads
75
Likes
2
Rating
0
P
Printablesbartkodden

Double patch cabinet (TL-SG108)

This model is used to combine a TP link switch with a part of this (amazon) or this (aliexpress) 24 port patch panel. After receiving the patch panel I noticed it consisted of three 8 port parts. I already had the TP link switches and…

Downloads
75
Likes
19
Rating
0
P
PrintablesVeco

Modular 10" inch server rack - TL-SG108 mounting panel

1U Mounting panel for a TP-Link TL-SG108 to match the Modular 10" inch server rack project

Downloads
73
Likes
11
Rating
0
P
Printablesjaav

tp-link TL-SG108S Network Switch SKADIS Holder

A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.

Downloads
72
Likes
5
Rating
0
P
PrintablesTien Hong Nhan

TP Link 8 Port Switch TL-SG102 Wall Mount

Wall Mount Brackets for TP-Link 8 Port Gigabit Switch TL-SG108

Downloads
70
Likes
8
Rating
0
P

Meross Smart WiFi Garage Door - MSG100 Sensor Bracket

I recently ran into an issue installing my new WiFi Smart Garage Door Opener. There was no bracket to mount the sensor to the door and my door had a lip on it preventing me from lining it up easily. I made this bracket that the sensor…

Downloads
67
Likes
9
Rating
0
P
PrintablesRCmodeleng

TP-Link TL-SG105 Network Box Mounting Bracket

A lightweight bracket designed to hold the TL-SG105 TP-Link Desktop switch. Can be mounted to any flat surface, wall, cupboard etc. The mount is customised to suit the ports and requisite access points of the switch box. the mount is…

Downloads
66
Likes
13
Rating
0
P
PrintablesSiff3D

Meross MSG100 Smart GDO Mounting Bracket

Mounting bracket for Meross MSG100 / Refoss RSG100 / Refoss MSG100 smart garage door opener (non-affiliate links). The bracket is designed for Craftsman GDO, but should fit on any Chamberlain/LiftMaster or other GDO with mounting plate on…

Downloads
63
Likes
6
Rating
5
P
PrintablesK7162

TP Link TL-SG105E Mounting Plate

A mounting plate for the TP Link TL-SG105 E network switch that allows you to attach it to a flat surface using double-sided tape. I recommend using PETG or another strong filament to keep the screw heads from breaking off. Print with…

Downloads
62
Likes
4
Rating
0
P
PrintablesTerenceMK

Modular 1U Relay Rack Mount for TP-Link TL-SG108 + Rasberry Pi + AN5506-01-A1.

Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…

Downloads
62
Likes
14
Rating
0