Search results: shaping

Sort order

58 models

P
PrintablesHalloSpaceBoy

Easy Prusa MK4 Input Shaping Calibration

Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
780
Likes
92
Rating
5
P
Printableswedgeworks

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
725
Likes
39
Rating
5

High Speed PETG Input Shaping Profile

This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…

Downloads
720
Likes
20
Rating
5
P
PrintablesTifn

Enhanced silicone caulk shaping tool

Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…

Downloads
588
Likes
73
Rating
4.5
P
PrintablesCmdrSoyo

Printer Surface Quality Test (Ringing, Input Shaping, Extrusion Accuracy)

A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…

Downloads
369
Likes
22
Rating
5
P
PrintablesVoxel3D_NL

Input shaping test print for markforged kinematics

Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.

Downloads
323
Likes
4
Rating
5
P
Printableskiwispaceman

Fly USB ADXL345 Accelerometer / Input Shaping for Ender-3 V3 SE X and Y axis - REMIX

This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…

Downloads
303
Likes
28
Rating
0
P
PrintablesOptikalblitz

MK Oppressor - Coffee Filter Shaping Die

Inspired by the OREA Negotiator filter press tool, this model is designed to allow you to press your coffee filter into place for the ‘no-bypass’ method of pour-over coffee brewing. The general conical shape and central stem are about the…

Downloads
246
Likes
20
Rating
0
P
PrintablesEsqueue

Shaping and styling tool (The Cut Buddy)

This is a tool used to guide in shaping up your hair line and beard using clippers or even a razor. This design is based on The Cut Buddy which I purchased a while back on Amazon. This was designed in Fusion 360 and I also included a…

Downloads
224
Likes
16
Rating
5
P
PrintablesRebellion3D

Prusa Mini INPUT SHAPING: X Axis error FIX (temporary)

As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…

Downloads
204
Likes
19
Rating
5
P
Printablesiabulko

Beard shaping tool - No comb

Created for simpler prints when you have problems with bed adhesion for the comb part of the original.

Downloads
202
Likes
15
Rating
5
P
PrintablesDallatorre

Udon - Bigoli shaping disk for Philips Pasta Maker

Shaping disk modeled to fit perfectly any Philips Pasta Maker Viva Collection. Mine follows the default 4-hole pattern which is rare for other similar models I've seen. Be sure the printer has the wall flow calibrated, try to reduce…

Downloads
200
Likes
18
Rating
0
P
Printableseried

Winter beard shaping tool

Trim your beard precisely and with style for winter times. See https://www.thingiverse.com/thing:1805384 for usage instructions. For shaping the snowflakes you need a electric razor with a thin head. Print instructions How I Designed This…

Downloads
191
Likes
47
Rating
5
P
PrintablesNoneYaBizness

ADXL345 Mount for input shaping in Klipper for SV06 printer

Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…

Downloads
173
Likes
14
Rating
5
P
Printablesalleycat

4/4 Violin Bridge Shaping Jig

A small jig for holding a 4/4 violin bridge blank. The blank is safely wedged in place. It has a stiffening structure on the underside, but prints without supports nonetheless.

Downloads
172
Likes
38
Rating
0
P
Printables7ZL

Precision Beard Shaping Template and Styling Comb

Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…

Downloads
164
Likes
14
Rating
0
P
PrintablesEsqueue

Shaping & styling tool for hair and beard line up & edging

A shape up tool used to line your hair or beard. Very inspired by The Cut Buddy. Category: Accessories

Downloads
154
Likes
15
Rating
0
P
Printablesgcreative

Input shaping calibration ringing tower alternative

Snapmaker J1s input shaping tune wizard have a bug - not saving picked values. (FW 2.7.1) https://www.facebook.com/groups/snapmakerj1/permalink/1112429939797317/ To tune input shaping this model created. Why? There is a standard Ringing…

Downloads
149
Likes
2
Rating
0
P
PrintablesSweet Pea

Orea Negotiator (Top Text Removed for ease of printing.) Filter Shaping

The branding text on the top has been removed for ease of printing. A tool designed for the Orea Brewer - to help you shape and fit flat circular filters, conical filters, or trapezoid filters into the Orea Brewer or other flat bed coffee…

Downloads
135
Likes
5
Rating
0
P
PrintablesAuka

Shaping tool for rotating ceramics

4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…

Downloads
100
Likes
27
Rating
0
P
PrintablesThesBer

FLSun SR creality sonic pad anti vibration resonance sensor holder klipper input shaping

This is a FLSun SR anti vibration resonance sensor (klipper input shaper) holder. I use the sensor/holder from/with the Creality Sonic Pad and Klipper. My other FLSun SR upgrades for high printing speeds are bimetal hotend, original…

Downloads
91
Likes
5
Rating
0

Apple airtag for shaping leather

Apple airtag for shaping the leather case Print the part twice and glue together. In the middle of the part there is a small reservoir for excess glue. Example of use. 1. Make a leather case 2. Print the Airtag dummy 3. Put this model in…

Downloads
80
Likes
22
Rating
0
P
Printablesevgn

churro shaping instrument

4 + perimeters otherwise it will have a hole inside wich can snap the model

Downloads
74
Likes
4
Rating
0
P
PrintablesDavid H

Various Surfboard Fin Plugs - FCS Compatible for Shaping

A range of custom FCS style surfboard fin plug to fit the original FCS type plug fins. Measurements were taken from some spare plugs that I have sitting around from a previous board build. I have uploaded a range of commonly used cant…

Downloads
66
Likes
5
Rating
5
P
PrintablesHenk

Adapter for "DREMEL® SHAPING PLATFORM (576)" to Proxxon micromat

I have a Dremel "shaping platform" and wanted to use it with my Proxxon micromot. So I designed an adapter for it. The adapter is basically a collet that fits th 2 cm collar of the micromot. Print instructions Category: Hand Tools Summary…

Downloads
65
Likes
27
Rating
0
P
PrintablesJonW

Pubic Hair Shaping tools

Quick & Easy Pubic Hair Shaping tools – Choose your style, press the template in place, shave the excess, and you’re done. You can adjust the size in the slicer. Works with PLA or PETG — no supports needed.

Downloads
63
Likes
10
Rating
0
P
Printablesdxeoane

Ring reshaping tool

This tool allows you to restore the shape of a bent ring. To use it, first place the ring on the conical piece, then attach the other piece designed to press the ring back into shape. For better control over the applied force, you can…

Downloads
57
Likes
3
Rating
0
P
PrintablesLuke Peter

Raspberry Pi Pico case for input shaping

See original instructions - they are fine.

Downloads
54
Likes
5
Rating
0
P
PrintablesFlex

Powerbox to Tuttle drill and shaping guides

These drill guides are used to drill the holes in a Powerbox fin in order to convert it to Tuttle or universal. They are meant to help when using this adapter. https://www.printables.com/model/491976-powerbox-to-tuttleuniversal-converter…

Downloads
52
Likes
2
Rating
0
P
Printablesbrechelmachert

Easy Prusa MK4 Input Shaping Calibration (Custom file for different setups)

I used this for my MMU3 setup with an 0.6mm nozzle. You can get the custom g-code out of the Layer-End Section. Follow the original steps, use this equation to solve for your frequency: 15 * [ (1 + (5(z) - 2) ) / 99 ]

Downloads
51
Likes
1
Rating
5
P
PrintablesL007W1CK

HOTSWAP SPRITE EXTRUDER BTT LIS2DW / ADXL45 MOUNT for X and Y INPUT SHAPING

The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point. Just slide the Case with the sensor underneath the screw and tighten it down. i also used a long m3 screw for stabilizing the Bracket for…

Downloads
49
Likes
11
Rating
0
P
PrintablesDavid H

Surfboard Leash Plug - for Shaping

A selection of surfboard plugs for attaching a surfboard leash to a surfboard. The _thin file totals 13mm depth, while all the other ones have a depth of 15mm. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2…

Downloads
45
Likes
1
Rating
0

Anvil for shaping Foam Armour Cosplay

Made this for foam armour shaping in cosplay. Super handy. Make sure to make it strong with a good wall thickness so you can beat it up :) Files to edit if you want a different shape.…

Downloads
43
Likes
25
Rating
0
P
PrintablesMacNite

Adafruit LIS3DH Mount for Input Shaping on Duet and Klipper

This is a quick design I came up with to mount the LIS3DH from Adafruit to an 40mm axial fan. https://www.adafruit.com/product/2809 Just print it and mount it to your hotend cooling fan using 2-4 M3 screws. You can attach the…

Downloads
40
Likes
2
Rating
0
P
PrintablesBartosz S

Food Shaping Mold with Press | Ring Mold for Steak Tartare & More

Opis PL Urządzenie do formowania i porcjowania potraw , składające się z pierścienia oraz dopasowanego tłoka. Pozwala w prosty sposób nadać estetyczny, równy kształt potrawom takim jak tatar wołowy , ryż, kasza, purée czy desery. Dzięki…

Downloads
33
Likes
5
Rating
2
P
PrintablesHamilcar

Adapter for inputshaping mount for BIGTREETECH ADXL345 S2DW Accelerometer

I liked the mount, but my accelerometer did not fit. Instead of resizing, I made a simple add on to the original model so that the BIGTREETECH S2DW Accelerometer can also be used with the Y axis bed mount.

Downloads
22
Likes
2
Rating
0
P
PrintablesRHX

Beard Shaping Guide & Comb

The problem with most beard guides Nearly every beard shaping tool uses the same generic cheek curve. That curve is an average, and faces aren't averages. If your cheek line runs steeper or shallower than whoever designed the tool, you…

Downloads
16
Likes
3
Rating
0
P
Printablesm m

Cookie Shaping Attachment for Bosch MOM5

With this attachment, you can shape cookies. If you have the MOMV5 mincer attachment, you can use this with it. The attachment is prepared in two separate folders: one is a single piece, but it requires supports to be enabled during…

Downloads
16
Likes
0
Rating
0
P
Printablestrombone

ghost shape for drawing cooking and shaping

i know im not going to win this but anyway heres a ghost

Downloads
15
Likes
1
Rating
0
P
PrintablesKyle

Shaping molds

Shaping mold C1

Downloads
15
Likes
3
Rating
0
P
PrintablesEscrich

Soporte para sensor Input Shaping en EVA3

Nuevo soporte para montar el acelerómetro de Creality sobre un cabezal del tipo EVA3

Downloads
14
Likes
5
Rating
0
P
PrintablesLeskoIam

Hook mold for veneer shaping

Made this mold for making bent veneer hooks. What you need: This mold ( towel_hook_mold_upper_Mk2.stl is available with added groove to easily hook veneer into the mold) Veneer of your choice (cca. 0.5mm thick) Wood glue (Titebond 3 or…

Downloads
14
Likes
4
Rating
0
P
PrintablesWallie

pool cue tip shaping tool

remix of another shaping tool, made the handle a bit bigger with textured finish to eliminate the slot to tighten the butt and gives a bit more to hold onto, added a stencil to trace when cutting out sand paper, added a cutout of text of…

Downloads
13
Likes
3
Rating
0
P
PrintablesEscrich

Soporte para sensor de vibración, Input shaping

Sistema de sujeción para el acelerómetro, utilizado para medir las vibraciones en la cama de una impresora 3D, con la tecnología Input shaping, el cable debe quedar mirando hacia la parte delantera de la impresora, también hay un soporte…

Downloads
13
Likes
4
Rating
0
P
PrintablesCello

Mellowfly ADX1345 Input Shaping head/bed mount for neptune 4 plus

I tried out a few of the prints but none of them seemed good, and since I only had M3 4mm screws, no nuts, some zip ties and a dream to get this done just today, i decided to design this the bed piece can be zip tied but if you want to…

Downloads
12
Likes
3
Rating
0
P
PrintablesMitsuMira

Espresso Cup Shaping Set (Cylinder Mold + Base and Strip Cutters)

A three-part set for hand-building small espresso cups from rolled clay. How it works: Roll a sheet of clay to approximately 7 mm thickness. Use the strip cutter to cut the rectangular strip that forms the side of the cup. Use the base…

Downloads
11
Likes
1
Rating
0
P
Printablesyannicklp

OLYMPUS modular flash adapter for projected light shaping

When snapping a photo (preferably in a dim environment), this accessory will enable creating a light projection of the desired shape. It can be adjusted in length via both included canons in order to better fit the needs.

Downloads
11
Likes
3
Rating
0
P
PrintablesOdevsa

Input Shaping Sensor Shell

Tiny funcional shell for input shaping sensor using RP2040 Zero + ADXL345. Files already in correct position to print, no need support screw holes have self-support, you only need remove this self-support with a screwdriver. Hardware: 1x…

Downloads
9
Likes
2
Rating
0
P
PrintablesPit Live Props

input shaping ADXL 345

the holes for the thermal 2 x M3x4mm OD4mm heatset inserts 2 x M3x8mm machine screws 2 x M3x6mm machine screws Assembly

Downloads
9
Likes
2
Rating
5
P
PrintablesRobert Brown

Croissant Shaping Toolset

The Perfect Croissant, Standardized. Making croissants from scratch is a labor of love, but the hardest part for me is nailing the exact geometry: getting perfectly straight edges, maintaining consistent dough thickness, and cutting…

Downloads
4
Likes
1
Rating
0
P
Printablesagald

Type C Pi Pico case for input shaping

A Pi Pico case with cables out for input shaping with adxl345

Downloads
0
Likes
0
Rating
0
P
Printables

Precision Beard Shaping Template and Styling Comb

Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…

P
Printables

Shaping and styling tool (The Cut Buddy)

This is a tool used to guide in shaping up your hair line and beard using clippers or even a razor. This design is based on The Cut Buddy which I purchased a while back on Amazon. This was designed in Fusion 360 and I also included a…

P
Printables

Hook mold for veneer shaping

Made this mold for making bent veneer hooks. What you need: This mold ( towel_hook_mold_upper_Mk2.stl is available with added groove to easily hook veneer into the mold) Veneer of your choice (cca. 0.5mm thick) Wood glue (Titebond 3 or…

P
Printables

Enhanced silicone caulk shaping tool

Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…

P
Printables

Easy Prusa MK4 Input Shaping Calibration

Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

P
Printables

input shaping ADXL 345

the holes for the thermal 2 x M3x4mm OD4mm heatset inserts 2 x M3x8mm machine screws 2 x M3x6mm machine screws Assembly