462 models
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
Wiper blades stop wiping well when the edges of the rubber blade get rounded off and are not as sharp as new. This can be remedied by cutting a thin strip of the blade off and generating a new sharp edge. Use this tool and the sharpest…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Featuring a geometric body, and knurled cap, this is the perfect way to elevate your simple metal pencil sharpener. The base catches the pencil shavings and can be unscrewed when full. It uses this Staedtler pencil sharpener . Enjoy!
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
ENG Sharpen blocks of dressmaker's chalk with this sharpener. Sharp edges allow you to draw fine lines on your fabrics. It is very easy to use just move the block of chalk back and forth in the V-shaped groove at the top, until the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
Mine is one of these MAXIMUM sharpeners from Canadian Tire. There are similar sharpeners from many other brands (Grizzly, Craftex, King Canada), they probably all come out of the same Chinese factory. But Tormek is the Cadillac in this…
Print approx. €7.42–€9.07 excl. taxPreliminary estimate for PETGSource material: PET
a wetstone holder and slider at 22 degrees also at 15 degree aswell
Print approx. €9.80–€11.97 excl. taxPreliminary estimate for one variant
Remix of a fantastic drill bit sharpener designed by werz 99 This remix model is designed to be used with Parkside dremels (Lidl tool brand). Additionally you can find here a Parkside to Dremel thread adapter.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Decorative sharpener pencil box. Print Settings Rafts: No Supports: No Resolution: 0.2
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
The model is snug and optimized for PLA. When printing in ASA, be sure to upscale it to 100.05% or something around that.
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for one variant
The sharpener has been transformed into a cyber truck. It fits without any problems. The model is printed separately with wheels. The wheels are later plugged together with 2 mm diameter axles which should be longer than 22 mm. If the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
EN I found this model on makerworld and changed the design to match it with Makita equipment https://makerworld.com/de/models/434992-drill-bit-sharpener#profileId-339921 You should use supports for the big Overhang in the middle and the…
Print approx. €3.83–€4.68 excl. taxPreliminary estimate for PETGSource material: PET
Rolling knife sharpener box including room for two spare stones. Print out of PLA, precision is good enough to ensure snug fit of the top cover. Infill: 15% 3d cubic (you can block infill in the middle of slab on PLA to save a bit of time…
Print approx. €3.42–€4.19 excl. taxPreliminary estimate for one variant
Držák je vytvořen pro ořezávátko 2,5 mm x 14 mm (d x š). Výška v přední části je 9 mm a v zadní 4 mm. The holder is made for a 2.5mm x 14mm (L x W) sharpener. The height in the front part is 9 mm and in the back 4 mm.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
This is a stylish pencil stand for your desk or workbench. It holds six pencils as well as the Blackwing One-Step Long Point Sharpener. You can use the sharpener without removing it from the stand. The stand will guard the points of the…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Supports are not needed. Tisk bez podpěr.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it anyways. This is one of those. I bought this nice battery powered pencil sharpener at Goodwill and it didn't have a cover. It…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A sharpener to restore the point on jumbo crayons ≤ 15mm diameter, with 4 point styles: Fine Cone - for fine detail Standard Cone - for everyday use Blunt Point - durable and consistent line Bullet Point - great for toddler play This…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Pencil sharpener holder that prevents graphite powder from spilling when the sharpener is tilted.
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
I believe the mounting option from the manufacturer is nearly impossible to use. I created this simple bracket so I can mount and dismount the sharpener with ease. Supports should not be needed for this model.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
(Summary consolidated/updated 01/15/23) This is a mini belt sander design intended primarily for sharpening knives though it may also be OK for some light duty grinding/jewelry making/polishing, etc.). It uses commonly available 3/4" x…
I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…
This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
Pencil holder in the shape of a giant sharpener. No supports required.
Also see my Diamond Stone version of this rolling sharpener. Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to…
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
Description Drill Bit Sharpening Attachment for Angle Grinders – a simple and practical tool for sharpening metal drill bits using an angle grinder. This drill bit sharpener is designed to work with many popular angle grinders. Simply…
Rolling Knife Sharpener with inbuilt planetary gearbox with Mechanical Advantage of 1:3 (HORL compatible) Important: This part is published under the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) licence!…
I recommend scaling up to 1" on the sides (166%).
Hier stelle ich euch mein Design Messerschleifgerät vor! Ich wollte einen Messerschleifer mit Rotationsfunktion designen, welcher gut funktioniert und dazu noch gut aussieht. Ich denke, dass ist mir gut gelungen. Die Montageanleitung ist…
Copycat of HORL sharpening system, easy to print, no supports. Printed in PLA, infill at your choice, in my case all has 15% gyroid, 3 perimeters. Orings best in TPU hardness 95A, really good fit and no mess to install. Parts are oriented…
Although I was not too successful with the original design I made this holder which I found more convenient. Works with 5mm x 5mm x 5mm cubic magnets like these: Example No Glue was required for me. Tips for assembling: Use a flat object…
Messerschärfer Folgende Teile werden benötig Tischplatte. Multiplex 15mm Abstand 1 und 2 Multiplex 15mm. Oder kann auch gedruckt werden. Führungsblock 1x 8mm Welle. 180mm lang 2x M8 Muttern 2x Feder 10x2x70 2x LM8UU Messerspanner 2x M8x60…
Sharpener Heyho I have developed a candle sharpener for a local school to make it easier to place home-made candles in holders! But the sharpener also works for conventionally bought candles! Scalability: The sharpener is of course super…
Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to form divots on the edge -- kind of like washboarding on a dirt…
Remix of knife sharpener with additional features.
This is a guide that screws on to the front of a standard rotary tool for sharpening tungstens (TIG welding electrodes). To use this, you will need a rotary tool, 25mm diamond sharpening wheels, and four 1/4-20 x 1/2" brass set screws,…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
Custom made for my Wusthof whetstone (ref 704773), here is my sharpening device ! Inspired by some i found here, i made my own, according to my tastes and needs. I purchased the stone online on knivesandtools (24€ + shipping) , very happy…
SharpGuide: Carpenter Pencil Sharpener Guide This unique 3D-printed carpenter pencil sharpener guide is designed to offer a precise and efficient sharpening experience for two popular pencil sizes—7x10mm and 7x15mm. The guide features…
The tool is a remix of the original model with where it has been redesigned to fit Parkside (Lidl brand) dremel tool.
Drill bit gauge set at 118 degrees. Remove the protective shroud from the grinder. Use with safety precaution. Recommend using higher infill for strength
A gauge to sharp any knife with an angle of 17.5°
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Update 29 jul 2022: Made the hole in the stone holder bigger so that the stick attaches easier. Prerequisites: To 10 mm M5 screws with two hex nuts Print with 2 mm walls/top/bottom for stability and with no support. 150_5_20.3mf: For…
My filament kept catching on the starting connector of my Bowden tube. So I got a pack of dollar-store cheap pencil sharpeners to try. Nope. Way too big. So I modeled my own in SketchUp and printed my own to fit the blade they use.…
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
Only remixed the mini 118 degrees version. Just a 5 degrees twist on the support to make a relief to the drill bit. Credits to mgx for his awesome idea. See his sharpener description for instructions. Category: Machine Tools
Customized base for Lidl parkside drill. It's remix of https://www.thingiverse.com/thing:3059363 There you can find the second part, it's V2 version. Parkside drill mount is M16. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
It is not easy to hold a knife by set angle. Dremel tool makes work effectively. This model with 25 degree angel. You can chang angle by set new length of the triangular.
Based on this design from reddit! I used a piece of 110mmx40mm sandpaper and a couple of m3 screws. Does it work? Kind of… Is it cool? I think so.
Uses any whetstone roughly 60mm wide Category: Kitchen & Dining
Pencil sharpener for 8mm diameter pencils. Category: Hand Tools
This is remix of KB Knife sharpener from fsanders. Thanks fsanders for sharing CAD files. It is basically changing 606 bearing to 625 bearing, which is 1mm thinner and 1mm narrower. To compensate this, moter plate and brace arm has bump.…
Just a simple pencilsharpener for two sizes of pencils. This model is non-functional except for the fun part :) I modelled this on a 1:1 scale from a real sharpener and printed this 400% the actual size. Print instructions Category: Hand…
Deutsch: Ein Schärfer für Schneiderkreide, damit die Schneiderkreide wieder am Stoff anzeichnet. Der anfallende Kreidestaub wird am Boden aufgefangen und kann später entsorgt werden. Druckeinstellungen: Drucker: Prusa Mk 3.9 Rafts: Nein…
Storage Box for Knife Sharepener Horl and add-on. Works for Horl pro as well as Horl. Designed for MMU/Palette but can be printed in one color as well. With little pocket for cloth and/or eraser. EDIT November 2026: added 0.3mm more…
This is my first model since I moved from TinkerCAD to FreeCAD 😃 This sharpener support is only compatible with the metal knife sharpeners found on AliExpress. They are cheap and cheerful in my opinion. I was using a #1000 grit in the…
Tired of that sad little hand crank? Slap this adapter on your drill and go from dull pencil to laser-sharp point in about 1.5 seconds flat. It's loud, it's ridiculous, and it's the most fun you'll ever have getting ready for school.…
This jig holds your drills at a 15 degree angle downwards and a 59 degree angle. Included cad if you want to modify. Be sure to credit me! If you like to buy me a coffee( or tea) consider tipping! made live on my Twitch:…
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
This is a jig for sharpening drill bits to 4 facet on a vater grindstone. Makes perfect 4 faset drill bits. Custom Section Category: Tools
When I came to needing to make a new hot end PTFE tube, I tried all the chamfering jigs I could find. But I couldn't get the hang of holding a blade in a jig and then turning it, or the tube, to get the chamfer. The only thing that worked…
This is a design for a Stabilo Woody Pencil sharpener which I made since we had no sharpener for these thick pencils around. You can use a blade from a standard pencil sharpener. I added the fusion 360 design files if you want to modify…
If you have damaged drill bits, you can use this project to fix them. Print as shown on a picture, without supports, but with brim.
For the reel seat we need 6 threaded inserts (Ruthex) M3 and 2 threaded inserts M6. 2 O-rings are also required, e.g. (https://www.amazon.de/dp/B00N3UZ0SG?psc=1&ref=ppx_yo2ov_dt_b_product_details) and 2 ball bearings 6806 2RS e.g.…
With this tool you can sharpen edges of Ski and Snowboard in 4 different angels. You additionally nee a file (any standard or diamond file 70x25x5 mm) and a Hex Head Cap Screw M6 x 40. Two clamps with 4 and 5 mm grab the file, screw in…
Replacement gear for the both the Boston model 18 and model 19 electric pencil sharpeners that were produced through the 80's and 90's. Reuploading here so that it wouldn't get lost, only copy I could find was from 2014.
Blade sharpener The edge of my Bambu scraper has become dull, so I made a sharpening gadget for it. But it also works with a traditional razor blade or a kitchen scraper blade. The maximum blade size is roughly 25x45mm. For sharpening, I…
Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.
As you know, small drills sharpening is a problem for hobby electronics. I tried to solve this problem. Here is my design for this device, named "wishbon". In addition to plastic parts, it uses: 2 bearings (D=22, d=6, B=6...8mm). I used…
Big sharpener to hold your pencils. Prints without supports, glue together. If you like a commercial license for selling pleas join my Thangs membership plan: https://thangs.com/designer/3D%20prints%20and%20gifts
Pencil Holder Pencil Sharpener / Lapicero Sacapuntas
Carpenter Pencil Sharpener and Offset Block Easy forming a perfect sharp tip on your Carpenter Pencil can also be turned around and use it as an offset Block.
Housing for a 100mm TOKO file to sharpen a plexiglas/acrylic ski wax scraper. You will additionally need: 100mm TOKO (or other) file 5mm plexiglas/acrylic scraper This design also works for 3mm scrapers. For a better fit you might want to…
You need to glue the internal support to the middle part and the pencil sharpener to the support using a strong adhesive like epoxy. Also glue the top and head to the middle. It prints with minor supports. The concept and paint of the…
A portable travel case to carry and protect an 8 pack of crayons and an A7 sized notebook with a built-in crayon sharpener. This model should be fine in either PET or PLA plastics. No supports needed. Note : Pay attention to the…
I've seen some of these around for the single variant of the Staedtler sharpeners, but couldn't find a suitable one for the double… So out came the calipers! Feel free to make modifications, I'll attach the individual component STL files,…
I wanted initially a holder for sewing tailor's chalk, but since I saw there was a sharpener model posted on printables by creator @sannyt, I decided to integrate to design into it. I modified the sharpener to have 6x2mm magnets, but you…
Worked with a teacher on Facebook to make an old time pencil sharpner cover. Teacher was looking for a replacement, and didn't want to ebay just the cover. I'm learning Fusion 360, so I took it on as a challenge. She's super stoked that…
Einhell axxio 18/125 drill sharpener 135 degree and relief 10 degrees. Feel free to remix - f3d file is added. Remember to wear the protection glasses and use your head ;)
I modified the design here https://www.thingiverse.com/thing:2474245/#comments to make it easier. M10 threaded rods are so easy to get anywhere. Only smooth rod you need is 8mm , You dont need LM8UU because you can use printed one. I use…
Horl Angle Adjustment Step Some time ago I purchased a Japanese knife which was sharpened at a way smaller angle than 15° that my Horl sharpener uses. So for years I've been using a cutting board to put under my angle tool to decrease my…
I like the looks of the Horl, so I wanted some kind of display-stand
This is an easy to print rotary sharpener that will fit any desk or drawing table. I am using this sharpener with my 2mm Caran d'Ache Fixpencils and my 2mm Kita-Boshi 2mm pencil. My oldest mechanical pencils are over 30 years old. They…
Requires x4 M6 Screws. Suitable for blades up to 1.5 mm thick.
NOTES: ⁕ As quite a few people have shown an interest in this, I am designing another more refined version with options for smaller bed, interchangeable adapter plates (to sharpen scissors, axes and non-magnetic blades, etc.) I will be…
There are several models of knife sharpeners. I've tried several, and I've always found the knife grip using magnets to be less effective. So, I bought this model that was on sale on AliExpress: Fixed Edge Angle Sharpener With Whirl Clip…
Updated - 28 April 2021 This is my Leadingedge system Upgrades for the Ruixin Pro RX-008 sharpening jig. It allows you to sharpen blades with a magnetic holder, scissors, chisels, large kitchen knives and many other tools. It enables…
