13,012 models
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
To celebrate our new president's election, we created a bust of Petr Pavel. There are two versions available. A casual in a flannel shirt and a formal one in a suit.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
držák baterie Parkside na zeď
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
Držák baterky Parkside/Parkside 20V battery holder
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…
Print approx. €7.06–€8.62 excl. taxPreliminary estimate for one variant
Print a piece of Space History Size : 200mm (diameter) x 2.2mm (66% of the real size) The bottom is a reproduction of the Side 1 of the Voyager Golden Record . The top is a reproduction of the record cover diagram that contains the disc…
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Can be printed without support
Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant
rocBased on the excellent work of "djedje_zr7", my remix mainly provides a "locking" feature to the drawers and some minor improvements. All modifications and improvements from original design: “Locking” feature for the drawers. Now, they…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
A simple outside radius gauge for 1-15mm. Eine einfache Außenradiuslehre für 1-15 mm.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Made in two variants. It is good to be printed from PETG! You will need 4 pcs 4x40mm self-tapping screws to mount the charger and 2 pcs screws for the whole mount.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
Easily printable extender for Quicko T12 microsolder and its other clones of the same size, which allows this microsolder to be elegantly operated on batteries designed for Makita or Parkside hand cordless tools, which is useful not only…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for one variant
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
Update May 8th 2023: Unfortunately I made a mistake and uploaded a wrong .stl file! The .gcode file is ok… @Herbi_16692 made me aware of this, thanks for that! New file is uploaded… I apologize for all wasted filament and print time! Are…
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
Quick model of the old key that Chris Redfield has to collect to unlock doors in the Spencer mansion in Resident Evil 1. Recommend support on build plate.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
CZ: Boční boxy na nářadí a příslušenství určené pro Originál Prusa Enclosure v kombinaci s tiskárnami Prusa MK3/MK3S/MK3S+. Pokud byste si chtěli modely upravit pro jiný typ tiskárny (například pro MK4), přiložil jsem i zdrojové soubory…
Print approx. €7.62–€9.31 excl. taxPreliminary estimate for PETGSource material: PET
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
Made a sidebox to storage al the equipement that i use for the printer
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Il just modified the angle to fit the 45° of the LCD panel.
Print approx. €7.36–€8.99 excl. taxPreliminary estimate for PETGSource material: PET
Side molding clip for an EF Civic, possibly CRX or other models from the 86 era. Layer size: (0.15-0.1) Material: ABS Supports: Yes
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
9 Sided Drip Tray designed to match the 9 Sided Twisted Planter. If you're using the twisted planter for a plant that needs drainage holes, poke a few holes in the bottom of the planter and print this matching tray to go underneath. My…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
I had no idea you can go into PrusaSlicer, right click the item, mirror along X-Axis, and a right side bin becomes a left side bin. So before I learned this I added a second hook to a single hook left side bin
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
A simple inside radius gauge for 1-15mm. Eine einfache Innenradiuslehre für 1–15 mm.
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Vectorized picture of Totoro and converted for 3D printing. Background layer is 1mm, rest is black. Print instructions For 2 color print you need to add a color break in Slic3r.
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
The only difference is lower pedestal.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
For both side doors you need 6 x M3 x 10 screws 6 x Square nuts 6 x Neodym magnets 8 x 4 mm (take the 8x4 file) OR 6 x Neodym magnets 8 x 3 mm (take the 8x3 file) Print the handle parts on the side and with supports. Take a look at the…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
This is a snap-fit end cap for 20x20 V-slot aluminum extrusion profiles with one open side . It fits securely into three V-slot channels and the center bore , while keeping one full side open for uninterrupted access to the rail, belt…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
Print approx. €7.31–€8.93 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
Bring the power of the Force into your bathroom with this hilarious Jedi-inspired sign. Featuring a cloaked figure using the Jedi Force to flush the toilet, this humorous design is perfect for Star Wars fans and adds a touch of geeky fun…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Somtimes the battery needs to be flipped 180° degrees: A reversed AEG/Ridgid to Parkside adapter Print standing with 15% grid infill, organic support everywhere. Print all the parts, then insert brass press-in nuts as seen on the…
Print approx. €2.25–€2.74 excl. taxPreliminary estimate for one variant
The 75mm long picatinny rail (dimensions according MIL-STD-1913) is 15mm high to fit on the side of the Stinger 2 magazine body. This height is ideal to fit the arrow quiver right next to the magazine for quick reloading. The 40mm hole…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed! This is an alternative d4 that deviates from the standard triangular pyramid design and uses a 3d kite-shaped diamond instead (or two square pyramids bottom to bottom if you prefer). This design is usually easier to…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
For those who have their spool to the side of their printer, this is a simple and elegant solution to your guide's needs. I liked the original, but I kept forgetting to thread the filament through before loading. I remodeled it to fit a…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
NW Präsident byl prvním továrně vyráběným sériovým automobilem na území Česka , resp. tehdejšího Rakouska-Uherska a jedním z prvních automobilů na světě vůbec. Automobil vyráběla továrna Nesselsdorfer Wagenbau-Fabriks-Gesselschaft A. G.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This model serves as a replacement for the original adapter. It is available in two variants: a faithful replica of the original design and an optimized version specifically tailored for printing. The optimized model accounts for reduced…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
After a long time of usage, the plastic parts that hold the side panels on the radiator started to fall apart so I decided to make a simple replacement. I decided not to make the whole thin circle because it would complicate the print.…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
WARNING: THE USE OF THIS MODEL INVOLVES WIRING MAINS VOLTAGE CABLES (240 V IN THE UK). DO NOT PROCEED IF YOU'RE NOT COMFORTABLE DOING THIS! I like to be able to switch on/off electrical equipment in groups that are only ever used…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
The model has been designed for a multi-color printer, but it's easy to limit printing to a single color by printing only the Dodecaedre v9.STL file contained in the Dodecaedre v9.3mf project file. For moncolor, all other STL files must…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to put lids on my sideboxes, but wanted to make sure they were easy to open. I saw some models with tabs, but I didn't want my printer to take up any additional space, so I opted to add a simple notch. I attempted to shape the…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
I'm printing it with asa, 260C nozzle and 97C bed, 0.6 Nozzle. Put additional supports on enter, if no then it will roll up.
Print approx. €45.93–€56.14 excl. taxPreliminary estimate for one variant
Show off your deck's artwork - holds deck ~2.25" from wall to clear shaped decks. #10 screw to mount board. Can be mounted horizontal or vertically, with or without trucks attached. Has 6 mounting holes for old-school or new-school truck…
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
Most door hooks attach on the top and are accessible only from the outside (when the door is closed/the direction the door opens to). This model is accessible from the inside while the door can close normally, without any obstructions.…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
My first remix! I loved the tea sidecars uploaded onto here, but they were either too small or too big (the “massive” one is truly massive). I wanted something juuust right. I really liked how DusBus's model hugged the rim of my cups but…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
Print resolution at 0.10. Print with PLA. gray for the first 0.7mm, black for the next 0.7mm, and white for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
I had a request to make a dual-sided “coin” of the Alcoholics Anonymous for a friend, and because I had two colors that fit very closely to the colors of some of their material, I decided to make it dual color. Printing instructions Print…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
A clamp for the Plant 2sides so it sticks into the wire no movement (pressed) Expand 5% for better fitting
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Right and left versions of empty boxes and left side there is also toolbox version. Inside the toolbox there is slot of original prusa mk4 tools.
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for PETGSource material: PET
Print as shown in screen shots with flat (non-track) side down to plate.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Bronze Cast of President Lincoln's Right Hand The Library of Congress has a bronze cast of Abraham Lincoln's right hand, made by Leonard Wells Volk in 1860. The cast depicts Lincoln's hand holding the sawed-off handle of a broomstick,…
Print approx. €11.08–€13.54 excl. taxPreliminary estimate for one variant
If you have no place to place your phone when sleeping and you are tired to search it on the ground when the alarm goes, this model is for you. You can change the parameters in fusion360 (see below). Features a slot for your USB charging…
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for PETGSource material: PET
I created a simple adapter for the Parkside PHKSA 20-Li C4 AKU circular saw for use with a MAKITA guide rail. I am using the C4 generation of the saw, but the base will probably be the same for older versions. I recommend printing on a…
Print approx. €6.13–€7.50 excl. taxPreliminary estimate for one variant
Durable side frames (temples) for mounting above the ears 03.12.25 - Model Uptaded and Replaced. No Supports needed anymore. Holes diameter 1.5mm Distance from Glass Frame 2.5mm
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Nut aligment tool in package for INDX Founders edition isn't too handy for me. I made my own tool for easy find the position of screw in behind during assembly/disassembly of side panels. Note: to ensure that nut not fall down you must to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
I originally created this to be able to mount guitar pedals outside of my eurorack case (housed in a pelican air), but quickly learned that they are so helpful for cables and any other thing you might need to get easy access to. I've done…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…
Print approx. €0.72–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Cable clips that fit to the back of the Prusa MK4/MK4S without hindering movement of the heatbed. Can hold 4 cables of ~7mm diameter (or more if they're thinner).
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Pink Floyd - Dark Side of the moon. Single extruder multi-color print. Color changes in 3MF file with .2mm layer height. First Layer: Yellow Second Layer: Orange Third Layer: Red Fourth layer: Green Fifth layer: Blue Sixth layer: Purple…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Not much to say. It holds your sidecutters closed so they can be stored more easily. It can't reunite you with a long lost love. It can't cook you a succulent Chinese meal. It might be able to fix a broken marriage though, but I haven't…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
A 10mm shortened version from Zocazol. Slightly beveled + reduced hole for better fixing of the side. I did this for my Noctua D15 which fits just right. The lower extension brackets are not needed, stick to the original bracket. If you…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Did a remix, because original part won't fit on MINI because of y-axis motor. Simply just have cutted off the left handle of the strap 😜. More details in the thread:…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Imbus holder for Parkside green holder (handle compatible) or for any imbus set you like. Easy to remove wall mount option or holes for Parkside pegboard mount. Extra slot for size 7, which is not included in most of the sets.
Print approx. €4.31–€5.27 excl. taxPreliminary estimate for PETGSource material: PET
NO SUPPORTS NEEDED A little screen mount for ender 3 v3 se, best if you have limited space (like me) or this would just seem more comfortable. Personally used it since I printed it, it wobbles slightly but doesn't bother me(if any one…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
There are many different types of mounts for Wera screwdrivers, but sometimes you only need two or three. Here are single mounts in two different sizes for screwdrivers, which can be arranged on a pegboard as you see fit.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
I designed the side stop in Fusion 360 using shape and size of original part Printed one in Recycled PLA for prototype/test. I used 0.20mm layer height, 4 perimeters for extra strength and supports for knob location. I used “Paint-on…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
grill or wall art fancover 140 mm fancover 120 mm
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Another convenient way to store and access your Revo nozzles using the E3D Revo Connect modular system. I remixed the great original sidebox first created by KalleKnall and then remixed by dotson90 with Mesh sides and added a front mount…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
Quick remake of the original model with space on both sides of the case for the hand grips making it easier to open. My partner wanted this as a desk insert but was having a hard time opening it when I printed the original model. Printed…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for PETGSource material: PET
I wanted the sides of my Lack Enclosure v2 to be removable for maintenance access (without removing the entire top U-frame), while also using @Drakka01's excellent Pocket Doors remix , so I came up with this. Due to a request, I've also…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for PETGSource material: PET
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €5.43–€6.63 excl. taxPreliminary estimate for one variant
I recently purchased two Ikea Nävlinge lights for bedside reading and loved their sleek design and ease of installation. However, the light was too intense for my taste, and it disturbed my wife while I was reading. The lamp emits 220…
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for PETGSource material: PET
for tools
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
I made a replica of the cap and spring to close the 2 side holes of CIFIAL's OPTIMA toilet I made in PETG Cap Infill: 15% Layer Height: 0.2mm Supports: Yes, everywhere and snug Spring Infill: 100% Layer Height: 0.2mm Supports: Yes,…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
List of possible outcomes: 3x Video Game 2x Social Media 2x Watch TV 1x Take a Nap 1x Go for a Walk 1x Roll Again 1x Household Chores 1x Get to Work Two version available: Single color MMU version Disclaimer: This 12-sided die is NOT HR…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
The original part (yes, it is called “ front base tube button side ”) on my wife's ST2 was lost because it obviously didn't hold properly from the start and simply fell out somewhere along the road. That's why it didn't make sense for me…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
