Bat Projector Signal
Transform a led tea light to a nice projector.
- Downloads
- 139
- Likes
- 57
- Rating
- 4
534 models
Transform a led tea light to a nice projector.
CZ Adaptér pro montáž univerzálních směrových LED světel https://www.aliexpress.com/item/32880546232.html?spm=a2g0s.12269583.0.0.633e42a744FoPJ ). Montážní adaptéry se dají také koupit, ale na DL1000 2014 > neapasují (i když prodejci…
I have modelled a replacement battery cover for a Delphin Forza Safe fish signalizer for my friend. Maybe someone will find it useful. I am also attaching a link to Tinkercad if anyone would like to modify this model:…
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ The…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
2025/4/21 fixed forearm length, updated all related file The cover photo was printed on 150% with a 0.6 nozzle Goes together about the same as the original, the only major difference is that I changed the shin frame and removed feet. See…
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
~120dB 23x55x14 mm (mini) Print Time 1 hour 23x78x14 mm (Normal) Print Time 1.30 hour The normal version has a deeper sound (peak at ~1560 Hz) This version is better for longer rangs like emergencies. The mini version is comparable to a…
turn signal intake with 3/4" led light hole
README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…
model is now one piece rather than 3. Have also modified the bottom to be completely flat for ease of printing
I have created some accessories for the Landy Mini from 3D Sets which can be easily attached with some super glue. The colors you can see in the photos. The mirrors can be easily bent in the right direction after gluing, license plate and…
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
Based on the Danish main signal. You will need 2x M3 screws and some glue to assemble one signal. The stripes on the front is made with white and red electrical tape.
Signal Launcher Leaf Sight V2 by Qwerm A leaf sight designed for use with 37mm signal launchers. The sight can be either mounted on side or top picatinny rails. Due to various signaling rounds having different ranges, the sight is marked…
Print to allow for easy mounting of the RSL to any vertical 1x1 or 2x1 with ½" #10 hole spacing such as the REV Ion Extrusion.
This STONE STONE SIGNAL BUILDING is printed as a single unit. It will take many hours to print, but the wait is a very satisfying model for your layout. It is printed with Prusament PLA. Print the main structure in the color filament that…
I wanted to replace the stock turn signals on my Kawasaki Vulcan S 650. However, the Kawasaki turn signals are mounted with a different kind of turn signal attachment, and the rear ones have this rubber mount. There are people who drill…
Micro-controller: Any Arduino compatible micro-controller will work. The IR train sensors can be powered by 3.3V DC, but have a longer detection range when powered at 5V DC. The XIAO SAMD21 micro-controller used in this project is powered…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears as the Bat-signal and also on the movie poster. It's practically a perfect copy. I also added two holes of…
Hallo und Heja BVB, was soll ich sagen, es ist eine kleine Lightbox mit BVB Logo und als Basis der Signal Iduna Park! Viel Spaß beim Drucken. Schaut gerne mal bei mir auf YouTube oder Instagram vorbei, da habe ich das ein oder andere mehr…
Update V2 : Standfuss zum besseren hinstellen/kleben.An der Seite Klingel hinzugefügt. Druck mit 0.4 Düse und .8 Layerhöhe. V1 .Druck mit 0.4 Düse und .12 mm Layerhöhe.Buchstabe F sollte nur mit Resin-Drucker erscheinen. Viel Spaß.…
Modern Belgian railroad signal, using the square plate. This is drawn up based on plans and my own measures. Of course adapted to the printing technology. This is the original version for PLA printing, I have worked on a resin print…
very simple model, i used the official low poly game model as a reference. Use in conjunction with Longmarch9's armor set- https://www.printables.com/model/1116352-dummy-13-signalis-lstr-512-set-beta/files
Diese Zweiton Signalpfeife hilft dir im Notfall länger und lauter auf dich aufmerksam zu machen. This two-tone whistle helps you draw attention to yourself longer and louder in an emergency. --- Druckzeit: 35 Minuten Druckposition: Evtl.…
A reproduction of the signal box you can find at Goathland in 1:76 Perfect if you want to re-create Hogsmeade station or Goathland station Foot note: this design is distributed for free you cannot print and then sell without my written…
Batman silhouette batsignal 2dwallart
Rare part from the 12v era I recreated
A model in HO (1:87.1) scale, of a typical generic signal, the likes of which can be found all over the United States. It's got a cutout to install an actual LED in the top. I painted all sides of my LED black except the front, and…
*Yamaha Version in Progress* Overview Do you enjoy the freedom and fury of having a street-legal dirt bike but fear ripping (or someone seeing) your license plate? Well fear no more because now it can be tucked away in the flick of a…
Update May 4th 2026: Added some other versions of the Logo. Also added an image I got from Reddit that has the evolution of the batman logo. Let me know if you want me to create any others from that list. The Bat-Signal | Desktop…
Recommendations for printing: material: PETG layer thickness: 0.2 mm supports: prohibit for text Non-printing parts: 6 screws 3x30 mm foam 130х90х10 mm More information on my Telegram channel: https://t.me/my3dguns Рекомендации по печати:…
Signaling control house
Belgian simple railroad signal scale H0 1:87 Created based on pictures and some measures I found (and took myself) There are 2 versions of the pole, ‘lage’ means the phone box is postioned a bit lower on the pole. I added small markers on…
Models contain two types of auxiliary signal support equipment. Typically used to store the electronics equipment used to power nearby track signals. Two types are included: 1. is the standalone box which is located nearby 2. Is the type…
This is a Federal Signal type rotor that is 9/12 port. This uses s 280 DC motor that can be found easily on Amazon. It could be 6-9v. If you are going to use this model for your own model, make sure the license matches and that you give…
stavědlo - železniční stavba
This is a storage and use solution for the Thermoworks Signals BBQ System. The system is comprised of the Monitor itself, 3 color-coded Food Probes, 1 color-coded Ambient Chamber Probe, a clip to hold the Ambient Probe off of the surface…
Unable to find properly sized O gauge crossing signals so I designed this one. Uses 2 5mm LEDs and can be wired with old fashioned phone wire which I think is 28 or 30 gauge. Base has option of gluing a tube that will fit in a ¼ inch hole…
This is a 1/2 scale fully functional replica. I measured off of my real model 2 and real 3T22 hat to make this model. I do not own a housing for my real Model 2, but Model 2's literally use a 3T22 hat for the housing top. So my 3T22's hat…
Can be printed with any material. Print uses Screws. This siren should be compatible with the rotator box for my Tbolt model, but I plan to make it's own rotator box in the future. This siren should be held on the rotator box by friction.
HO scale model of North American color light signals. This is a model of the modern design that is becoming more common as it replaces older versions. The model is designed to be resin printed due to the size of pieces. 2, 3, and 4 aspect…
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote" creating the modell to Barbér Máté . Print Settings Printer: prusai i3 rework 1.5 Rafts: No Supports: Yes Resolution:…
This is a Half scale replica of a Federal Signal Q siren. Parts list: Motor: https://www.amazon.com/dp/B0BB2V8PNK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_14 Screw kit for motor:…
Since the original grills are too big for the I made these inspired by a design found on facebook but they now fit better. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.24 -0.1 Infill: 20%…
Lego Bracket 2 x 3 - 1 x 3 (Train Signal Stand) from the 12v era is hard to find so i made a 3d model. This is hard to print so I also made a fdm optimized version
I made these adapter plates for fitting aftermarket M8 thread LED turn signals to an MT07. The front files fit the stock mounting points in the radiator guard fairing. The rear files fitted the tail tidy on the bike.
Storage for the Leatherman Signal compatible with the Gridfinity system by ZackFreedman . Grid size: 1x3x6 Note that fitment was designed with the pocket clip installed. Depending on which side you display, the Leatherman will orient…
This lever frame is based on a typical British railway signalbox frame. Scale to be ~43mm long for 4mm:1ft (OO/EM/P4) scale. This frame is very fragile to print, it will require a resin based DLP or SLA printer. The support structure…
An adapter for using Motogadget turn signals in particular. M8 thread for the indicator, M6 thread for assembly. Should fit all modern LC Triumph Print instructions Category: Automotive Summary An adapter for using Motogadget turn signals…
Note for non-Russian users: PU-4 is a launcher for special pyrotechnic cartridges that are used to send emergency and information signals. In the Russian Federation, PU-4 is not a weapon, does not require a license. If PU-4 is illegal in…
If you have ever removed your steering wheel for whatever reason, then you know how annoying and fragile this piece is.
A Cleat that can clamp around a wire, and be used to tie of signal flags. models for 5 mm and 7 mm wire. uses 3 M4 socket head cap screws and nuts to assemble
Remixed from plasticbruv's LSTR head & hair. Will only fit with that model.
RJ45 network signal cable fixing frame, you need to add adhesive by yourself
The high mounted exhaust I ordered required me to move my turn signals from the cheap tail tidy that was already installed. These require just three small holes per side that can be plugged later if needed. They account for the angles…
Functional blocking signal of the Deutsche Bahn / Bundesbahn for model railway track 1 in scale 1:32. Printed with 0.3mm nozzle with PLA filament and support. The signal in matt black and the base / foundation in recycle grey. The mast…
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. The base of the model “basis voet” could be modified…
I broke my turn signal on my wr250r and was looking for LED replacement. I needed a cover to block the OEM opening so I've measure the OEM turn signal and tried to match the way the opening is. adding a hole in it so I can screw the LED…
Description This is a Dutch signalkeeper house with the signal box attached to the house. I have used this model to experiment with the possibilities of my Prusa Mk4 printer. This is my first attempt to print the walls of a building in…
Turn signal blanking plate/adapter for Yamaha YZF 600 (1996-2001) and similar motorcycles Used when fitting LED turn signals
Just before Word War II the Dutch Railways build a very modern concrete signal post at the west entrance of Utrecht Central Station (Leidseveer). This remarkable concrete structure, designed by achitect van Ravensteyn, was never…
Plantilla para pintar la señal de salida o bien para colgarla directamente.
takes a 1/4 in dowel, split for painting/assembly. Category: Props
This model is compatible with the lego system.
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. This is an update to the version here :…
I took jzisa's V29 as a reference for the inner chamber. I designed a new shell from scratch aiming for a compact, elegant result. I also added a hole perpendicular to the print layers for increased strength. It accepts a keyring or a…
This is a case for the Signal Sleuth. The Signal Sleuth Is a wardriving device that is a revision from the original Wardriver. You can find out more about wardriving and the device on my youtube: http://www.youtube.com/@463n7 If you would…
Kawasaki Z650 (2020) turn signal adapters The available after market adapters did not fit (pictured). Remix of https://www.thingiverse.com/thing:3535096 Category: Vehicles
Robot Signal Light (RSL) holder for First Robotics (FRC), to mount into 1-inch spaced #10 bolt holes (2x1). No other hardware needed, both models use the geometry of the RSL itself with at least a partial press fit to affix them them to…
When the original clip from the turn signal breaks off, this clip can be added to repair the mechanism. Print with supports for best results. This is a remix of: https://www.thingiverse.com/thing:2837864 I added thickness to the original…
Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…
The motor body and endbell are secured using the original screws that come with the motor. Motor is a Samsung DE31-00029H. You can also use a DE31-00029K or DE31-00029J or any other 29 motor. There are two motor body variants. The "normal…
Time to extend the DIY-viaduct with points/switches and to add DIY-signals! See pictures for more information. Here the advantage of possible cable routing inside the DIY-Viaduct for Kato’s Unitrack comes to the light. For viaducts and…
This is a simple plug/plate for the Honda Navi front signals when replacing the OEM assembly with an LED. This fits a pretty standard 9.5mm diameter mounting bolt. This does still require a >30mm washer on the inside to keep the plate…
I need add some turn signal on my Dualtron mini. For this I bought a Cosmo Ride which add some support to glue on a helmet. I have created this clip to put on my scooter deck, on which I glue the support for helmet from my Cosmo Ride. So…
The Einhorn revolver from Signalis, shrunk down to fit dummy 13 scale. Also included is a holster for the pistol, and custom trigger hands for holding it. May not fit the normal dummy 13 open hand. Recommend printing at as low of a layer…
Update April 15th - You have a choice now if you want to use a roots blower or a centrifugal blower. The roots will be more powerful and efficient, but harder to put together than the centrifugal. DISCLAIMER The information provided here…
I printed it standing up, since I needed some flexibility around the fork and would prefer not to print a beefier one in 2 days. There are M5 nut slots on the smaller part, maybe it will make mounting this on your motorcycle more…
Whistle not included! There are two variants: Signal-Whistle-Replacement.stl Version with cutout for a 42mm x 4.5mm (diameter) ferrocerium rod. Signal-Whistle-Replacement-Simple.stl Non-functional spacer part, just to keep the space…
A simple little 3d print I made to make to create a bat signal. Kinda crappy as it doesn't work at most distances but if you hold it right it makes a cool effect(pictured above). The flashlight it fits on is pretty cheap but you should be…
If your turn signal bulb broke and melted your lens and light housing, here's a replacement! The model is a pair featuring 2 replacement light housings for TSI's such as the ones in the picture above (pictured before replacement). They…
A tail-tidy bracket to hold a motorcycle license plate, a light over the plate, and turn signals. The plate has a 30 degree angle, and is only attached via its top two mounting holes to keep this as small and light as possible. Printed in…
Lens cover for Acebeam Terminator M1 that creates a bat signal. For the LEP side. The LEP must be fully (or at least mostly) zoomed out for the bat to show.
The photo is from about 6 feet. I got the flashlight I designed it for at sciplus.com, a great place to get interesting items from. I have a bunch of these flashlights because they are really good for a single AA battery flashlight. You…
Ducati Scrambler Turn Signal Adapter for non-original blinkers
This is for the slim version of the signal sleuth. 463n7.io
Its a bit holder that replaces the sharpening stone. I was unable to find the original so I remade it.
Eine Nachttischlampe als Bat-Signal Decor für Sohnemans Zimmer. Für das Mittelteil werden Supports gebraucht und für die Standfüße ist ein Brim empfehlenswert. Ich habe es mit einer Layerhöhe von 0,2 mm, 15% Infill und einer…
Replacement for the original turn signal. Must be printed in flexible material. I have used TPU95A, and PLA for supports. Printed on Prusa XL.
I tried recreating the misterious artifact appearing in the game, to match as best as possible the game logo when seen in wireframe mode. I think completely matching the logo is impossible, because it is an impossible figure (like the…
This is an accessory/add-on to the Mechanical (Geared) Interchange/Switches that I designed earlier: Brio - Mechanical (Geared) Interchange/Switch O1/P1 Track Brio - Mechanical (Geared) Interchange/Switch M1 Track Basically, after…
This is the replacement for genuine licence plate holder upgrade. It is made in 2 parts and join them with zip tie.
Designed to work with older style AC based O gauge model railroad. 3 wires for connecting to switches and separate lighting for LEDs so that they can be lit regardless of whether power is on the track.
GWR Signal Box - Type 7 for OO model railway, can be scaled for other gauges. Parts to be printed with support.
J'avais besoin du coté opposé au modèle déjà amélioré par @william scrase j'ai donc fait une symétrie miroir. PS: J'aime bien le café et/ou la bière :D ----------- I needed the opposite side to the model already improved by @william…
The signal box resembles the characteristic architecture of classic Era II–III mechanical interlocking buildings found on Central European (mainly Austrian, Hungarian, and German) railways." A sturdy red-brick base featuring an arched…
This part can be used with aftermarket steering wheel bosses that lack or have poor engagement with the turn signal switch. There are intentionally no holes on this part so that you can print it and drill your own or use epoxy. I used…
EleLab_v2 Signal Generator For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost, modular…