Search results: skil

Sort order

328 models

P
PrintablesAP_Design

Flexetki Skill-Toy

I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…

Downloads
10,483
Likes
2,033
Rating
4.85
P
Printablesplabs.cz

Children Fine Motor Skills Toy: Basic Shape Set

The "Basic Shape Set" is a starter set for little explorers who are just getting acquainted with the world of shapes and colors, while helping to stimulate fine motor skills and eye-hand coordination. For little explorers who are ready…

Downloads
340
Likes
98
Rating
5
P
Printablesplabs.cz

Children Fine Motor Skills Toy: Advanced Shape Set

For little explorers who are ready for the next challenge, there is the "Advanced Shape Set". This set expands the horizons of learning by introducing more complex shapes where it helps stimulate fine motor skills and eye-hand…

Downloads
242
Likes
80
Rating
5
P
Printablesironsights

Pegboard SKILL Circular Saw Holder

I'd assume it works with most, if not all circular saws. I designed this to work with my SKIL 15 Amp 7-1/4 Inch Circular Saw, model 5280-01. You can see from the cad shots; I've reinforced the holder and pins for added strength. Saw…

Downloads
62
Likes
10
Rating
0
P
PrintablesBakul Gedang

Ling Skill 3

If you want to order a Mobile Legend hero model, we can help shape the character.

Downloads
10
Likes
2
Rating
0
P
PrintablesAP_Design

Flexetki Skill-Toy

I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…

Downloads
3,205
Likes
510
Rating
4.83
P
Printablesnilson_fx

Balancing Acrobats - Kids Skill Game

Little acrobats balancing and stacking game. Printing with more infill will result in heavier acrobats that are easier to stack. Acrobats available with and without smiling face. Can be scaled down for a mini desktop stacking game. Have…

Downloads
2,381
Likes
576
Rating
5
P
PrintablesPiotrownik

Improving fine motor skills, designing a 3D FDM printed orthosis to assist in the rehabilitation of individuals with hand spasticity

video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…

Downloads
2,243
Likes
1,149
Rating
4.13
P
PrintablesA_Print

Dinosaur Stack - Balance & Skill Game

Dinosaur Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the dinosaur figures on top of each other without making the tower fall. Each dinosaur has a…

Downloads
1,339
Likes
590
Rating
5
P
PrintablesPeter Farell

Cast Iron Play Skillet

Cast Iron Play Skillet

Downloads
822
Likes
276
Rating
5
P
PrintablesLouis

Balancing Alien Monkeys - Kids Skill Game

Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…

Downloads
679
Likes
261
Rating
4.89

Flexetki Skill Toy

Russian Flexetki Skill Toy and antistress Can print 100% size this 159mm ore change size

Downloads
516
Likes
36
Rating
4
P
Printablespr3mium.cola

Darts "triple-training" ring // Improve your Triple Skills!

Printed in PETG - Hellfire Red Extruder PETG - f3d file included! Feel free to remix. Wieso habe ich ein eigenes Modell gemacht - Was waren die Verbesserungsideen: Befestigung mit Dartspitzen Formgebung wie die Triplefelder Perfekt fit…

Downloads
428
Likes
55
Rating
5
P
PrintablesChase Adkins

Skil Table Saw TS6307-00 Miter Bar

This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.

Downloads
371
Likes
42
Rating
0
P
PrintablesAtomicStation

Knucklebone Knuckle Roller Skill Toy No Supports

I really enjoyed playing with the knucklebones roller introduced by @AP_Design and AroundSquare. However, I was unsatisfied with how my print came out. No matter what my support settings were I couldn't get it to print so that the end…

Downloads
362
Likes
45
Rating
4.67
P
PrintablesPiotr Kamycki

Erbauer / Skil - Battery 18V holder

Witajcie! Przedstawiam uchwyt na baterie 18V firmy Erbauer oraz Skil! Pozdrawiam!

Downloads
318
Likes
20
Rating
4
P
Printablesr00nee

Skilsaw Jobsite Featherboard

This featherboard works for the Skilsaw Jobsite tablesaw. It uses a 5/16 2" bolt and a nut. The original version did not push far enough toward the blade to give a thin cut, so I had to extend the board a couple inches. I also adjusted…

Downloads
312
Likes
30
Rating
4
P
PrintablesSwimfar

Skil Table Saw Zero Clerance Insert

This is a zero-clearance table saw insert for the Skil TS6307 table saw. My saw came with a nice metal insert. But I made this one so I could have a zero-clerance insert, and also as a test print before making the dado blade version. PETG…

Downloads
290
Likes
30
Rating
5
P
PrintablesCAD-Guy

motor skills toy

ENGLISCH (deutsch unten) A motor skills screw board - perfect for the little ones! It promotes dexterity and creativity - in addition, cognitive skills and hand-eye coordination improve. A lot of fun - which prepares the little craftsmen…

Downloads
261
Likes
212
Rating
5
P
PrintablesRuben Hauwaerts

Chair from skilift based on a doppelmayr 2 seater

Chair from skilift based on a doppelmayr 2 seater (on request from someone) This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub…

Downloads
253
Likes
18
Rating
0
P
PrintablesA_Print

Animal Stack - Balance & Skill Game

Animal Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the animal figures on top of each other without making the tower fall. Each animal has a different…

Downloads
238
Likes
90
Rating
5
P
PrintablesDenis Kovalev

DnD skills and spells area tools

My friends and I started playing Dnd on Fridays in the office. Than I made convenient devices for determining the distance while playing Dungeons and Dragons. 1 division = 1 inch, so will work for most cards with similar cell sizes. Print…

Downloads
225
Likes
57
Rating
5
P
PrintablesChris West

Flexetki Skill-Toy (Chamfered, 3 sizes) [Remix]

I enjoyed the Flexetki skill-toy in it's original variation, but the hard edges hurt my hands during use. The edges on this remix are chamfered (in a fairly rudimentary way, sorry) to improve comfort. To reduce weight, I provided 3…

Downloads
223
Likes
20
Rating
0
P

Amazon Basic (Skil/Denali) Electric Screwdriver Gridfinity Holder

Constructed using https://www.printables.com/model/916851-denali-screwdriver-holder-hsw model of the screw driver and the footprint of the bitholders and extension. Used gridfinity refined for the base. Changelog: v1 → v2: Added tolerance…

Downloads
221
Likes
37
Rating
5
P
PrintablesPiotr Kamycki

Erbauer / Skil - Tool holder 18V

Witajcie! Przedstawiam uchwyt na elektronarzędzia 18V marki Erbauer oraz Skil. Pozdrawiam!

Downloads
216
Likes
15
Rating
5
P
Printablesvic

Gaming Mode On Social Skills Off Door Hanger

A fun 3D-printed door hanger that reads “Gaming Mode On, Social Skills Off — Please come back later” with a game controller icon. Perfect for keeping interruptions away while you’re fully immersed in your game. Recommended print settings:…

Downloads
202
Likes
84
Rating
0
P
PrintablesRuben Hauwaerts

Chair from skilift based on a doppelmayr D-line 4 seater

This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub screws (M2 x 5mm) in the the 2 holes prepared for it, if you want you can put an…

Downloads
200
Likes
23
Rating
0
P
PrintablesMachenna56k

Cast Iron Skillet Pendant

A small charm with added loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of…

Downloads
196
Likes
67
Rating
5
P
Printables3D Project

Balancing Pyramid – 3D Printable Logic & Skill Game

🧩 Balancing Pyramid – 3D Printable Logic & Skill Game The Balancing Pyramid is a fun and challenging 3D printable logic game that tests patience, coordination, and balance. Your goal is to stack the colorful character-shaped pieces onto…

Downloads
194
Likes
62
Rating
5
P
Printablesspiderculture

Headlamp Base Replacement - For Skilhunt HB3

This is a replacement part for the Skilhunt HB3 headband that typically comes with the H04, H150, H200, and H300 headlamps from Skilhunt / ESKTE. This part should work with the other Skilhunt headlamp adapters you may find on Printables,…

Downloads
176
Likes
19
Rating
5
P
PrintablesMr Sosa

Skil Battery Holder

Didn't need any support for upright printing.

Downloads
162
Likes
14
Rating
4.5
P
PrintablesRichiH

Reciprocating saw holder - Bosch, Makita, Metabo, Ryobi, Milwaukee, Skil, Cat, DeWALT, Einhell, Black & Decker, etc

As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.

Downloads
160
Likes
61
Rating
5
P
PrintablesLuke Rantanen

Skillet Shield

Skillet shield decoration design

Downloads
155
Likes
10
Rating
5
P
PrintablesPaul

Headlamp Backpack Clip - Skilhunt H04 RC Mini

It's best to print in PET or ASA for strength, but my first print was in PLA and worked for initial testing just fine. Put on a backpack strap, molle, or even a belt loop. You might also enjoy: Skilhunt Flashlight Magnetic Charging Stand…

Downloads
155
Likes
87
Rating
0
P
PrintablesSami Kassimäki

Skil 1340 runner

Runner I designed to be used with https://www.printables.com/model/108962-featherboard-for-table for Skil 1340. Uses M6 screw, printed with 0,6 nozzle and 0.35mm layer height.

Downloads
146
Likes
24
Rating
5
P
PrintablesYumanBeing

Tool Logos #2 (Porter Cable, Skil, Diablo and Lenox)

Logos for Diablo, Lenox, Porter Cable and Skil. Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…

Downloads
143
Likes
25
Rating
5
P
Printablestr0y

Camlock vacuum adapter for Skil 1340AA/TS6307 Table Saw

Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…

Downloads
137
Likes
26
Rating
0
P
PrintablesSpicy3d

Halloween Diffusers for Emisar D4V2, D4K, Wurkkos TS10, Convoy T3, Skilhunt M150 Flashlights

You can buy these from me here! Consider giving us a 1 time donation if you like this model! I have uploaded the raw .STL files, and I have also uploaded my .3mf files. The raw .STL files do not have the holes for the light made in them,…

Downloads
134
Likes
37
Rating
5
P
PrintablesCatdad Workshop

tutorial: how to make any cookie cutter with no design or modeling skills

Basic steps Roughly, we will be following these steps: Find an SVG image that you want to turn into a cookie cutter Use a simple app to turn the image into a 3D object Set some settings in your slicer to create a cookie cutter I will walk…

Downloads
132
Likes
54
Rating
0
P
PrintablesPrism08

MOSKILLER mosquito outdoor trap

This is inspired from commercially available products that cost ca 160 Euros. It uses mosquito bait (scent) you can get from Amazon. This design should cost you less than 30 euros in case you need to buy everything. To make this mosquito…

Downloads
131
Likes
56
Rating
5
P
Printableskylboy06

Safari Stack - Balancing Skill Game

Bring the wild to your tabletop with Safari Stack, a physics-based balancing game designed to challenge kids' fine motor skills and patience. Whether they are playing solo or competing with friends, the goal is simple: keep the animals on…

Downloads
128
Likes
44
Rating
5
P
PrintablesSpicy3d

Zebralight H600 holder for Skilhunt HB3 headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…

Downloads
127
Likes
9
Rating
0
P
PrintablesAnthony Petty

Skil HSW Hanger

I needed a bracket to hang my Skil Electric Screwdriver SD561204 on my honeycomb storage wall. I mashed up the HSW bracket with my own design to make this quick and dirty hanger. It might fit other round things too. The main opening is…

Downloads
127
Likes
24
Rating
5
P
PrintablesSamuel Neto

Skilsaw table saw insert

I made this in two parts for clue after. Printed in PLA, upside down without a top, with 30% grade infil. In red for(to) match the brand.

Downloads
125
Likes
25
Rating
0
P
PrintablesKevin Chow

Skil Miter Saw Dust Collection

Two sizes for the SKIL miter saw. Works best when attached to dust collection, not stock bag. Screws into place with original screw for dust guard. Both require removal of the stock dust guard and top portion of the sliding fence. It also…

Downloads
122
Likes
8
Rating
0
P
PrintablesYang

Charging Stand for Skil SD561201 Rechargeable Screwdriver

In an effort to de-clutter my workbench, this charging stand and bit organizer was created for a Skil Model SD561201 electric screwdriver. There are two components a Base and a Lid. The tray in the Base is intended to hold weights to add…

Downloads
122
Likes
21
Rating
5
P
Printables2Elemental

Skil 1340 sled runner

I based this on the idea of Sami Kassimäki . When creating a sled for the Skil 1340 Table Saw, a miter slot runner is needed. I created this off of the dimensions of Sami's featherboard runner, but I redesigned it in Solidworks (all files…

Downloads
122
Likes
19
Rating
0
P
PrintablesSpicy3d

Skilhunt HB3 Headband Mount for Emisar DW4 Right Angle Flashlight

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…

Downloads
120
Likes
10
Rating
0
P
Printablesinteractive3

Vacuum adapter - Skil jobsite table saw to 1-7/8 Shop Vacuum Hose. Ridgid

20 March 2026 - Version 02 is updated. The 2.5" end is now about 1.5mm larger to fit more snugly into tool exhaust vents. Tablesaw - SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 Rigid Vacuum - Hose diameter…

Downloads
120
Likes
19
Rating
4
P
PrintablesZeroshin

Skil SD5619-00 TWIST 2.0 Screwdriver Charging Stand

From the original model, I modified the main holder so that the new screwdriver fits with its new USB-C. The USB-C part is more DIY that the original though. Also made them one part instead of two parts. Found that the original calls for…

Downloads
119
Likes
12
Rating
2
P
Printablesnleskiw

Adaptor for Skil 7492 Orbital Sander to 1.25" Shop-Vac Vacuum Hose

This allows you to directly connect a 1.25" (31mm) Shop-Vac hose directly to the exhaust of a Skil 7492 Orbital Sander. Link to OnShape model . It may work on other sanders with the following specs: OD of exhaust port: Approx 38mm Pins:…

Downloads
118
Likes
12
Rating
4
P
PrintablesBitBender

Sharkoon Skiller MECH SGK3 Foot Replacement

A replacement part for the rear feet of the Sharkoon Skiller Mech SGK3 keyboard. The original feet start to crumble after a few years. This replacement was designed as close to the original dimensions as possible. They nicely snap into…

Downloads
118
Likes
5
Rating
0
P
PrintablesLS Designs

Knuckle Roller skill toy

This toy is fun and easy to learn. I recommend 100% infill and a raft for bed adhesion

Downloads
115
Likes
15
Rating
0
P
PrintablesAustin Hansen

Stacking Balance Stones - Balance & Motor Skill Toy

This model includes 7 unique stacking balance stones , each designed with an organic, rock-like shape that works together as a complete balance set. Unlike random objects, every stone is intentionally shaped to create a fun and…

Downloads
114
Likes
76
Rating
0
P
PrintablesKorA

Skiller Mech SGK3 Sharkoon keyboard feet

I made 2 versions: 1- without using the original rubber, 2- in which I used the original rubber from the broken leg. Requires supports. I printed on a layer of 0.07mm. It came out very nice.

Downloads
114
Likes
7
Rating
5
P
Printablesejjenkins

Skil Router Table inserts (SRT 1039)

Router table inserts for the Skil Router Table (SRT 1039). I wanted more than the 3 inserts that came with the table and give me a larger assortment to support the work piece better for more bits and a small basic tray to hold them in.…

Downloads
112
Likes
24
Rating
0

Dust Collection Adapter for SKIL 10-inch Worm Drive Table Saw, going from 2.5" (ID 64mm) to 2.25" (ID 57mm) v1.0

Connect a 2.5" hose fitting to the amazing SKIL 10" Worm Drive Table Saw 's 2.25" dust collection port. Prints with no supports. (v1.0) I suggest printing with these settings: Filament type: PLA (I used PLA+) Nozzle diameter: can be 0.4mm…

Downloads
109
Likes
10
Rating
0

Dust Port Retrofit for Skilsaw Classic Circular Saw

Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s This great circular saw has only one weakness: no dust collection port. Today we fix that. Prints with no supports needed. If you print with 0.3 layer height and…

Downloads
107
Likes
17
Rating
0

SkilSaw table saw zero clearance insert fence

SketchUp model and STL of a Skilsaw table saw zero clearance insert for more accurate cutting and dust collection

Downloads
105
Likes
26
Rating
0
P
PrintablesSascha Curth

Skil Trimmer Blade (openscad)

This replacement blade fits snuggly onto the trimmer and printed with PLA and 100% infill it seems to stay alive way longer than the original ones - so far the battery is empty earlier than the blade is failing :-). Would be interesting…

Downloads
105
Likes
8
Rating
0
P
PrintablesMike Rainbow

GSkill RipJaws DDR4 Noctua 40mm x 20mm Ram cooler

Ive Designed myself a Noctua 40x20 fan housing to cool my Ram as everything else in my PC is water cooled and all the 360 rads are in a rear chamber theres not really any air movement in my Thermaltake tower 900 apart from a top entry fan…

Downloads
100
Likes
12
Rating
0

Hornet's Pale Nails (Silk Skill) STL Files | Life Size | High Detail

Hornet's Pale Nails, resembling Japanese kunai, are a Silk Skill acquired from a Weaver alter in Silksong. These ornate knives, woven from Hornet's silk, are reminiscent of the design of the Knight's Pure Nail in Hollow Knight. This file…

Downloads
100
Likes
17
Rating
5
P
Printablescartyski

Finger Kendama Skill Toy

Whether you're a seasoned kendama pro or a beginner looking to hone your skills, the Finger Kendama offers endless entertainment in the palm of your hand. Take it with you wherever you go and turn waiting time into a skill-building…

Downloads
99
Likes
28
Rating
0
P
Printablesbyrontyler

T-Nut for Skil Table Saw

T-Nut for Skil Table Saw model TS6307-00. I could not find any online that fit so I made one. Here it is. Basic but it works. Any printer can be used. I used 75% infill just to make it stronger but worked fine with 20%. It has clearance…

Downloads
99
Likes
11
Rating
5

Flexetki Skill-Toy New skin

я добавил новую оболочку что бы пластик не был скользким печать 0.3 сопло высота слоя 0.12 100% заполнение для веса для моего старого принтера TWO Tress bluer ушло 2 час

Downloads
87
Likes
7
Rating
0
P
PrintablesSammysHP

Skilhunt HB3 Chestplate

Sometimes, wearing a headlamp on your head can be a challenge, for example during rain or fog or when using a hat. An alternative is to wear the headlamp around your neck. But this can be uncomfortable and wobbly with most original…

Downloads
86
Likes
23
Rating
5
P
PrintablesJondav

Skill Ring for Fantasy Football / Bloodbowl 32mm

Skill ring for the skills of your players

Downloads
85
Likes
10
Rating
0
P
PrintablesSpicy3d

Wurkkos HD10 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…

Downloads
85
Likes
10
Rating
0
P
PrintablesBINGOBRICKS

Skill game with a ball and cascading rails

A simple but fun skill game! Can you get the ball across the cascades to the finish? This game is easy to print and even easier to assemble. You will also need: 17 screws M3x18 (or slightly longer) 15 washers 13x3.3mm (optional) 2 screws…

Downloads
83
Likes
31
Rating
0
P
Printablesjeremy cobert

Blood Bowl Skill Markers 25mm and 32mm

I really like the original design but wanted to use them on 25mm bases. For some reason the original files would not print correctly for me so I ran them through Netfabb to correct them and they seem to print properly. So I took the…

Downloads
82
Likes
8
Rating
5
P
PrintablesOldPeterBG

Hegemony Skilled/Unskilled Meeple

Hegemony Skilled/Unskilled Meeple Skilled Meeple: (28mm) Grey x12 White x6 Orange x 6 Blue x 6 Purple x6 UnSkilled Meeple: (22mm) Grey x22 White x5 Orange x 5 Blue x 5 Purple x5

Downloads
81
Likes
16
Rating
5
P
PrintablesSpicy3d

Skilhunt H150 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Skilhunt H150 mount snaps right into the Skilhunt HB3 headband! Works with Skilhunt H150 series headlamp. The width of the mount is made to fit…

Downloads
81
Likes
9
Rating
0
P
PrintablesDenzarki

Vantage (board game) Skill Tokens

I don't like the look of the cardboard tokens but also don't want the wooden ones, so decided to make my own. You can filament change to get the colours as the design is raised or you can just paint it like i did here. The official token…

Downloads
77
Likes
11
Rating
0
P
PrintablesJulius3E8

Rivals for Catan game tokens - Strength, Trade and Skill

Replacement tokens for the Rivals for Catan game. More closely based on the illustrations on the cards and instruction manual than the original tokens. Even though the skill token isn't worth any victory points, it's just nice to know who…

Downloads
76
Likes
12
Rating
0
P
PrintablesFranky Storms

Flame Skill Fruit from PalWorld

This is the Flame Skill Fruit from the video game PalWorld. I recommend a layer height of at least 0.2mm and tree supports. Feel free to adjust layer height as desired for added resolution. Enjoy!

Downloads
75
Likes
29
Rating
0
P
PrintablesOle

SKIL Miele hose adapter

Adapter for the SKIL 100W multi sander, 280W orbital sander and 300 W Random Orbital Sander to a Miele vacuum hose. The tools use the X-Flow dust collection system but also come with a generic vacuum adapter. But that means using the 40…

Downloads
75
Likes
7
Rating
5
P
PrintablesNicolsburg

Witcher Old World skill dices

Designed for The Witcher: Old World board game, this is a full set of custom skill dice that replaces the original wooden cubes. Each die has a raised outer frame and an engraved symbol on top, representing one of the five core skills…

Downloads
74
Likes
15
Rating
0
P
PrintablesFeetOffTheTable

Cast iron skillet / frying pan - Rapunzel

It's a basic model for a cast iron skillet, with the option to swap the bottom plate out to customize it in any way you need to. Attached is a phone mount plate for an iPhone 16 max pro just in case you need it. The plate should just…

Downloads
74
Likes
11
Rating
5
P
PrintablesNP

Skil Router Sub Base

I needed a custom sub base for my 2.5" bit. Made it for all the sizes 0.5"-4"

Downloads
74
Likes
13
Rating
5
P
PrintablesCaio Kotan

SKILLET KEYCHAIN

This is a keychain of the rock band as called "SKILLET". A perfect gift for fans.

Downloads
73
Likes
10
Rating
5
P
Printablesmadebyaadil

Worm Fidget/Skill Toy

Original Printed at 250%. Different sized hands can scale as needed. Weight can be changed slightly with infill.

Downloads
73
Likes
19
Rating
0
P
PrintablesSpicy3d

Flexible Flashlight Diffuser for Wurkkos TS10, Convoy T3, or Skilhunt M150

You can purchase this item from me here! Consider supporting us on Patreon! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while camping. Give it a print! Check…

Downloads
73
Likes
8
Rating
0
P
PrintablesSaad Caffeine

Tactile Tic-Tac-Toe for Visually Impaired, Gross Motor Skills

co-designed at participatory design sessions at SalvageGarden makerspace, the all too familiar Tic-Tac-Toe game was re-designed with caregivers and persons with upper limb differences low fine motor skills visual impairments This activity…

Downloads
73
Likes
12
Rating
0
P
PrintablesFranky Storms

Dragon Skill Fruit from PalWorld

This is the Dragon Skill Fruit from the video game Palworld. I recommend printing in at least 0.2mm layer height with tree supports. For added detail feel free to lower the layer height. Enjoy!

Downloads
73
Likes
27
Rating
0
P
PrintablesPyrex

Amazon Basics / SKIL / Denali Cordless Stick Screwdriver Wall Mount

A simple wall mount for Amazon Basics screwdrivers. Holds the driver firmly. Print vertically for highest strength on clasp. Would suggest PETG and support for roof of bit block cavity.

Downloads
72
Likes
14
Rating
0
P
PrintablesMartin Jörg

Mary-Beth Gaskill - RDR2

Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck

Downloads
71
Likes
11
Rating
5
P
PrintablesRussellCage

Skil Table Saw (TS6307) tool holder

There's storage for everything on the table saw, but for the allen key/screwdriver. Not anymore! It fits on multiple places on the legs. Print in PETG for it's flexibility.

Downloads
70
Likes
13
Rating
0
P
PrintablesJohan

Skil table saw tool holder hook

Highly recommended to print this in PETG as the material need to be flexible when attaching the hook onto the rail.

Downloads
70
Likes
20
Rating
0
P
PrintablesBarnJoey

Skil pwrcore12 12v battery receiver

made this to convert a portable tire inflator to take a 12v battery instead of a cigarette lighter. can be modified to adapt anything to use a skil battery uses 6.3mm crimp spade connectors

Downloads
67
Likes
8
Rating
0
P
PrintablesDougS2K

Skil Table Saw Zero Clearance Thoat Plate for TS6307 Remix

Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…

Downloads
66
Likes
7
Rating
3
P
PrintablesFranky Storms

Dark Skill Fruit from PalWorld

This is the Dark Skill Fruit from the video game PalWorld. I recommend a layer height of at least 0.2mm and tree supports. Feel free to adjust layer height as desired for added resolution. Enjoy!

Downloads
66
Likes
29
Rating
0
P
Printablesiamchrismoran

Skil Table Saw with Counter Sink holes

Just a tiny bit narrower and fewer, but counter sunk, holes.

Downloads
65
Likes
2
Rating
0
P
PrintablesDarin M

Skil PWRCORE 12 Battery Cover

Overview When Skil stopped including battery covers with the USB-C version of their Skil PWRCORE 12 batteries, I searched high and low for a replacement but with no luck. So, I designed one myself, modeled after the OEM cover included…

Downloads
65
Likes
10
Rating
0
P

Balancing Dinos - Kids Skill Game

Little dinosaurs balancing and stacking game. Printing with more infill will result in heavier dinosaurs that are easier to stack. It can be scaled down for a mini desktop stacking game. Have fun.

Downloads
65
Likes
36
Rating
0
P
PrintablesD's Designs

T-track inserts for Skil 10" Table Saw

T-track insert for 10" Skil table saw. It fits with no side to side movement on my saw, but has enough up and down movement that it can be propped up with pennies or washers to be just proud of the table saw surface for gluing to jigs.

Downloads
65
Likes
9
Rating
5
P
Printables05WEL

Skil PWRCORE 20 battery to Makita LXT tools adaptor

Cordless tool battery adapter. Skil PWRCORE 20 Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach…

Downloads
64
Likes
10
Rating
0
P
PrintablesAnsel Slagle

Skil drill bit holder

This bit holder is made to fit a Skil cordless drill and uses the provided screw/screw hole on the base that holds the clip. The bits are just held in place by pressure.

Downloads
63
Likes
6
Rating
0
P
PrintablesFranky Storms

Earth Skill Fruit from PalWorld

This is the Earth Skill Fruit from the video game PalWorld. I recommend a layer height of at least 0.2mm and tree supports. Feel free to adjust layer height as desired for added resolution. Enjoy!

Downloads
63
Likes
24
Rating
0
P
PrintablesFranky Storms

Frost Skill Fruit from PalWorld

This is the Frost Skill Fruit from the video game PalWorld. I recommend a layer height of at least 0.2mm and tree supports. Feel free to adjust layer height as desired for added resolution. Enjoy!

Downloads
63
Likes
28
Rating
0
P
PrintablesFranky Storms

Electric Skill Fruit from PalWorld

This is the Electric Skill Fruit from the video game PalWorld. I recommend a layer height of at least 0.2mm and tree supports. Feel free to adjust layer height as desired for added resolution. Enjoy!

Downloads
63
Likes
29
Rating
0