one piece models for mini no glue just good slicing
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
- Downloads
- 17
- Likes
- 1
- Rating
- 0
Counting matching models…
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
NEW: READY TO PRINT MULTICOLOR — 6 colours in one run (Bambu Lab H2C) The same caffeine molecule and pencil pillars, now prepared for single-run 6-colour printing on a Bambu Lab H2C : CPK atoms with element letters (C black, H white, N…
Conically sliced (16°) Bent Pipe for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Conically sliced (16°) Christmas tree for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
This is a method to improve the layer adhesion of 3D prints. Made with Simplify3D version 5.
Hasselback slicing frame. Can be printed without support. Frame is designed for kitchen knife that has 1mm blade width. Frame width is adjustable. Potato support beam can be changed according to potato size.
Conically sliced (16°) Overhang Tower for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Printed here in PET-G 0.20 layer height 15% infill 2 perimeters, organic (tree) support for lid
Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…
Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…
10% scale model of a full low backed Whitewater Kayak. Message me if you would like to buy the full size shell design. Category: Hobby
Repair of the Mechanical Orrery turntable by https://www.printables.com/@M4NU
This model prints well with PETG and just 3 layers at 0.3mm layer thickness does the trick. The grid comes off just stiff enough and bendy to be inserted into wall and snap back to flat. A brass wire or screw can be attached to grid to…
Holder for Cuisinart DFP-14BCWNY 14-Cup Food Processor slicing disc and shredding disk as well as the plastic stem adapter thingy. Print instructions Category: Kitchen & Dining Summary Holder for Cuisinart DFP-14BCWNY 14-Cup Food…
Rack for storing up to 3 grating and slicing discs in a vertical position. These are made for the Vorwerk Thermomix accessory WunderSlicer by wundermix (V1 and V2). Ideally for storing them inside a drawer or kitchen cabinet / cupboard.…
This is the first revision of a bagel slicer I designed in OnShape. There are a few others on here already that look pretty good. I wanted one with a beefier base, no text/watermark, and to fit a certain aesthetic that I had in mind. I…
The official Prusa model of the MK3S extruder body (version R5) but the part that holds pinda has 3 perimeters and 40% infill. This thing often cracked for me when I was tightening PINDA, thus some more perimeters around PINDA should be…
Wall mounted holder for the slicing disk and the drive arbor of a Ninja BN601 Food Processor. It should hold things pretty well, but I make no safety claims/guarantees.
A simple bagel slicing jig with slots for cutting your bagels in landscape or portrait mode. Print at full scale for maximum bagel containment. 10% infill should be plenty.
This is a creative remix of the classic Benchy, designed to test your slicer and printer settings in a fun and slightly more complex way. What you can test: Overhangs and bridges Small details and sharp edges Layer alignment Cooling and…
Universal Finger Saver Print with supports Can be scaled up or down for larger or smaller hands. Works for left or right-handed people. Check out my selection of Household Items. Colors used Black - Eleg oo Rapid Black Pla Plus Bambu…
A simple slide-together two-piece breadbox with a nested slicing guide. Had some minor adhesion issues that didn't affect the interior at all, so I just ignored them. This was an insane print that took about 10 days to print and used 1.6…
A simple model to test students how to slice files correctly.
A simple bread slicing guide to cut bread. Creates approximately 18mm slices. Optional self adhesive non-slip feet can be added to the bottom (see photo)
0.20mm x 10 loop wall x 100% infill + tree light support
This is a set of modifier files that can be used as stencils (quite like a cookie cutter) to turn models into puzzles. The set contains six different sizes at four degrees of (puzzling) difficulty. Additionally, the modifiers feature a…
You might find this useful to evenly slice your bread using a standard bread knife. Apart from the printed cutting guide and the foot spacers you'll need a simple (wooden) bread board to mount these parts to (using e.g. 3x13mm wood…
Just import to PrusaSlicer and press button "Split to objects". “An innovative way to generate eggs from an empty space.” Note that before splitting this STL into objects there is just a hollow space in the hen. By splitting the cavity is…
An easy way to slice PET bottles for filament. The labels on the front (0.2 0.3 0.4) indicate the thickness of the bottle (in mm) appropriate for the given height of the slots. Heat up a coathanger wire or something similar & insert as…
My wife makes homemade bread, and while there are attachments for sale for bread knives to make the cuts consistent, this box allows you to put the loaf directly up against the wall and cut down it with a bread knife, making the cuts…
See UPDATE below: So sometimes I want to have a clean cut of a Thomas English Muffin to put in the toaster So with this form you slide the muffin down from the top, and use a serrated knife to slice the muffin in half. There is room at…
This is the knife blade drive gear for the Dormeyer Silver Chef electric slicing knife that dates back around to the 1950's. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100…
This device I made is specifically crafted for slicing chicken breast and tricky items like bread and bagels. It features several spacers, allowing me to stack them up in the tray and adjust the slicing thickness as needed. Once I've got…
A test i made to better understand an anomoly in the slicer that resulted printing issues in the corners of 2mm walled parts dependent on extrusion width.
Since ive had some Problems in Slicing the original (Main Problem was, that the Fins are somehow separated from the Fang) i remeshed it in Meshmixer for better Slicing. No changes Made Print Settings Printer Brand: Creality Printer: CR-10…
Repaired the files and fixed the problems with slicing the originals. Category: 3D Printer Accessories
Small model, that you can print as you teach people to slice. It has overhangs, rounded edges and even at 0.1 layer height it takes about an hour to print.
Door handle, must always be printed in two pieces that fit together. Attaching is with a screw.
Benchy Layered Scultpture - 10 years of slicing A piece of layered wall are to celebrated 10 years of Benchy being sliced
tool to grip better the cured meat in the slicer
I made this to hold slicing disks for Kenwood stand mixer. It requires 10x 6x3mm magnets. It might work without them, but I'd suggest you add them for better stability. Holds 5 slicing disks. Holes on top are for easy manipulation, the…
Model for adult rat brain matrix - tool to slice 1mm slices of brain. Students should design this slicing matrix tool according to size of studied animal brain.
Responding to https://github.com/prusa3d/PrusaSlicer/issues/12481 This model takes the repeating elements of a rectangular grid and introduces small gaps to shepherd the slicer into following a single contour overall. This is a common…
Just a simple box for learning how to emboss or indent text for individual note boxes. I used Prusa Slicer for this box. Nice text adding tool. Printed with Prusa MK4 and Prusament Army Green. Be creative! Happy printing! Explore my other…
Slicers have many limitations especially with usage of multiple threads and GPU. Here's a difficult enough object to measure slicing time. Never intended to actually be printed, thus no real photo. For repeatability best to send as whole…
I have one bad hand and this allows me to safely slice up to 2 limes at once, which is an important thing here in Peru. And helps old people in 3rd world countries. there is an ergonomic grip and canal for the knife.
so i bought a Worker Prophecy to mod up with parts, and the main blaster didn't have a top prime. And they didn't' sell a top prime, just kits to make it a pump or a bolt action (with extra parts to buy!) So i just made one. It has nails…
Cut even slices from a homemade loaf every time. The loaf sits between two slotted walls and the bread knife runs down the slots, so every slice comes out the same thickness. Grooves in the base catch the crumbs. Choose the slice…
Je parle francais. Si vous avez des questions, je vais m'efforcer d'y repondre le plus rapidement possible. Printed in www.fila3d.ca black PLA+ on Elegoo CC with cool plate at 0.2mm This is my 1st FreeCAD model and my 1st upload. Feel…
this is a really cool magic trick, you put your rod in the sliders (whole) then you slide the slider, and your rod magically separates into three different rods! it works by magnets holding the rods together, these are the magnets i used…
Push the prongs into an onion, tomato, lemon, potato or cucumber and slice evenly right down to the end, with your fingers safely on the grip and away from the blade. The knife slides between the prongs for even slices, and your fingers…
Old slicing machien from 1999: Tiso Domestico (Italia) F195 For a friend of mine: Old hand guard got broke after centuries of usage. Not least as a result of putting it in the dishwasher. So it got too brittle and finally broke som edges.…
have a great day (there in realy no reason why i made this)
Hasselback slicing frame. Can be printed without support. Frame is designed for kitchen knife that has 1mm blade width. Frame width is adjustable. Potato support beam can be changed according to potato size.
Printed here in PET-G 0.20 layer height 15% infill 2 perimeters, organic (tree) support for lid
This is the first revision of a bagel slicer I designed in OnShape. There are a few others on here already that look pretty good. I wanted one with a beefier base, no text/watermark, and to fit a certain aesthetic that I had in mind. I…
See UPDATE below: So sometimes I want to have a clean cut of a Thomas English Muffin to put in the toaster So with this form you slide the muffin down from the top, and use a serrated knife to slice the muffin in half. There is room at…
Do you also have trouble getting some foods sliced and diced evenly and consistently? Here's a quick print that can help! The “Slice" file is the main file to use, but the “Dice” print is meant to fit over the top of the “Slice” print so…