Hunting slingshot
Slingshot that also works for hunting. No supports needed PETG
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 772
- Likes
- 108
- Rating
- 5
734 models
Slingshot that also works for hunting. No supports needed PETG
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
After playing with the flying night dragon ( https://www.printables.com/de/model/404447-flying-night-dragon/comments/847889 ). We thought it would fun to release him from a slingshot. So I created this. You can use a PTFE-tube to prevent…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have a Classic Wooden Slingshot for you. It is really authentic and shoots well with it. To assemble you need a rubber band and some leather to catch the projectile. You…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
Just wanted to strengthen the belt clip area of the original file uploaded by Thrasher because the orientation of the print makes the clip easier to break between the layer lines. Also added a brim and tiny supports to keep the clip from…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
EN: This is an ergonomic handle for converting an inexpensive Chinese telescopic slingshot (see last two pictures). Thanks to the brilliant OpenScad script by Anachronist aka Amatulic , I was able to create a handle that fits perfectly in…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have an Ergonomic minimalist slingshot for you. It is really authentic and shoots well with it. To assemble you need a rubber band and some leather to catch the projectile.…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
100x160mm sign, advertising the ACME Giant slingshot, as seen in cartoons and my backyard orbital launch program. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…
Slingshot easy to print that has ergonomic handle for a great grip. Load a photo if you print it Print instructions Rafts: No Supports: No Resolution: 0.1, 0.2 Infill: 25%
This is a slingshot. Its has been tested and it works like a charm. It also is dead accurate. Print this with 70% infill to guarantee required strength. For the Flatband Holders use 100% infill. These should be rock solid. Do not over…
A simple but powerful hunting and shooting slingshot - through the forks (TTF). Assembly BOM 2x M5x20mm flat head screws 2x M5 bolts 1x Slingshot rubber band with pouch ( Amazon ) Recommended ammo Biodegradable clay spheres 8 - 10mm (…
This is a compact, sturdy and easy to print slingshot for adults. I've seen a kid with a slingshot and immediately had the urge to print one myself. I used it with old coffee-beans and they easily flew around 20+ meters. I printed it in…
A fix for the Kobra 3's print head not getting close enough to the magnet to pull the purge sling arm back. This simple fix just hooks into place and keeps the magnet about 2mm closer to the print head so that it catches every time.…
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
Boy Scout Slingshot Remix (Print One For A Kid!) This is a remix of Bill Hays Boy Scout Slingshot ( http://www.pocketpredator.com ) with holes for the pinky. You can find the original model here:…
This is a fun project where I wanted to combine together a ring and a slingshot.
The objective of this build was to explore and understand trigger mechanisms. In particular, how to achieve a light but reliable lock mechanism and one that re-cocks both the trigger and the bolt in one motion, so that a true ‘lock &…
Este modelo é dividido em duas partes com pinos separados para não precisar de suporte
A replica of the sling ring from Doctor Strange.
I got a little fed up with some of the other models that I have found on printables and thingiverse, so I gave a crack at making my interpretation/clone of the ScoutX with slightly narrower (41mm) forks. All in all this slingshot should…
V1.1: https://www.printables.com/model/640109-slingshot-v11 Grip for Slingshot - https://www.printables.com/model/639047-picatinny-grip-for-slingshot Fishing Attachment: https://www.printables.com/model/641043-handbow-fishing-attachment…
Sling Kontrol V1.1 "by" Qwerm A shameless ripoff of Subrev's Sling Control, a picatinny accessory that helps store your sling when not using your rifle. Changelog: -v1.1 Added looser fitting versions of the snap on version in order to…
a plane you shoot around with a rubber ban. only needs the parts and a rubber band. will be updating it to make improvements so feedback is welcome.
Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
Modeled after the Q Sling Devil, you use this in conjunction with some Paracord to attach slings (or other items) to your firearm. Works with airsoft, real firearms, or even… chairs? To tie the open ends, I used 18in of paracord for each,…
Assorted Gunslingers for your TTRPG needs
This is an easy to print Slingshot/Catapult. It is a relatively slim and pocketable design made for backyard/walk around shooting with clay ammo and .6 or .7mm bands No Supports required. Use PLA+ or PETG for Strongest results. 5…
My printer is down, I haven't been able to test any of the recent models I've uploaded but putting them out for input and also so you guys can have a base to work from. Update 20240501 - Added a version with the barrel
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Small goblin with a sling. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other bald…
A slingshot I designed. You will need a special rubber tubing made for slingshots as well as two metal beads. you put the rubber tubing through the two holes and then insert the metal balls inside the tubing to keep them in place. If…
This is a slingshot for small planes, like the great planes from robotfriend https://www.printables.com/de/model/456057-f23-ultralight-glider-print-in-place…
Stand um für bspw. ManaBox o.ä. die MTG oder Pokemon TCG Karten einzuscannen. Druckbar ohne Support in 5 Stunden. Zusätzlich benötigt: 8x M3 Schraube mit 10 mm Länge inkl. Mutter Front wurde für den Cutout des Deckels angepasst. -----…
I modeled this in Fusion 360 and then produced a tutorial on YouTube for it. Once printed, all you need is a rubber band.
Mounting rubber using a hole and a seating groove. I recommend supports, because of the roundness of the handle. ! WARNING ! WEAPON, HAZARD OF INJURY
Fun "slingshot" that works with a balloon. Nice for the kids to shoot corn with (some words of caution might be a good idea ;-) No need to fixate the balloon with normal use. No support required if oriented correctly. Do use a fair amount…
A sling mount or gun charm hanger for picatinny rail. Excellent design, very strong. The best one can ask for from a 3D print. Use an M3 screw and nut to secure it to the rail,
Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307
Using a mlok rail qd mount, some m4 bolts and nuts, you can now add a quick detachment point for your sling to your Magpul MOE stock. The 3d printed piece acts as a spacer and to increase surface area, the weight and the forces are…
You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop. Print in 0.15mm with 5 perimeters and 13 top/bottom layers. I used different infill…
Slingshots are versatile tools for outdoor fun, available in two main designs: One-Piece Slingshot : 3D-printed as a single unit, valued for its simplicity and sturdiness. Two-Part Slingshot : Consists of a main body and a separate back…
CC BY-NC-SA license: https://creativecommons.org/licenses/by-nc-sa/4.0/ These designs, and devices built from such, are experimental. While some minimal testing has been performed, they are provided as-is with no guarantees whatsoever.…
Updated models of a slightly larger size have been added for a tape width of 25 mm. An experimental mounting option between the two halves of the case is also being tested. BOM: 7x M3x10mm SHCS/BHCS 7x M3 Nuts Print Settings Rafts: No…
Cheap low cost Slingshot Ammo 9mm round shape Zip file contains multiple rounds. File was too big to include the 20+ rounds. Just copy/duplicate in your slicer and line up accordingly. Recommended Settings: PLA+ @ 250mms speed or whatever…
After continuing my 3D modeling learning journey, I've finally made some of the additional functional and aesthetic changes I planned! No longer do you need to perform mid-print steps! No longer do you need to worry about tolerances or…
MLOK standard attachment. A strong, minimalist loop for a mashhook, HK snaphook, or a loop of paracord for sling attachment. Fitment was tested on a ‘real steel’ handguard. The hardware I used for testing and fitment was taken from a QD…
Mini 13: Figurine System Compatible Ranged Weapon Set, includes Bow & Sling weapon designs: Shortbow Longbow Compound Shortbow Compound Longbow Crossbow - Old Style Crossbow - New Style Slingshot - Holes Slingshot - Notched Stone Sling
If you like what I do and want to support my work check out my Patreon!
Update 24-01-23 Added a hole for a cord. So, two versions available now. Update 25-01-23 Some complain about the width. I have added a model that is slightly wider. And one really wide… Those need probably support… 4 models now.…
The idea comes from the original pocket slingshot that you see on ebay and amazon. I was thinking i could do a better job and make it customizable with an addon to use arrows and steady grips. -For this you can use a balloon instead of…
This is an add-on for this model by IanO https://www.printables.com/model/1034404-card-slinger-10-for-mtg-manabox-easily-scan-in-bul I printed it at .32mm layer height in PLA.
print the weight at 100% infill. The sling itself can be printed at 15-20% infill.
If you like what I do and want to support my work check out my Patreon!
If you like what I do and want to support my work check out my Patreon!
I print it from wood pla and I use 9mm. (rubber secured by the balls it shoots)
Monster Hunter World slinger. The straps are on the large side at the moment until I figure out what armor to make and can shorten them properly. Because many of the armors also change the slinger arms they are designed to be…
If you like what I do and want to support my work check out my Patreon!
Slingshot ammo clip that holds and dispenses 12x 3/8" (9.5mm) steel balls. There are two holsters, one that the clip faces to the front and one that faces to the side. You will need one 5/16" (8mm) diameter 1.8mm thick rare earth…
This is a grip a threw together meant to be paired with my slingshot. Again, I haven't printed or tested this yet. Just putting the files out there for people to have. M3 screw Slim M3 nut - 1.8mm x 5.5mm -…
A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…
WARNING!!! This is a sports slingshot. It is made to shoot balls (steel, clay, lead, etc.) DO NOT shoot at living beings, as it can cause permanent damage or even death. DO NOT use stones as they can damage the frame due to unpredictable…
For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…
This is an easy to print slingshot with a bolted clamp. Print with lots of perimeters, sand the parts that's in contact with the rubber, and drill up the holes for the bolts Made for M6 bolts Easy to sand for normal setups cut, flip and…
Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined. Its smaller cause I dreaded the long printing time. While moddeling I thought about that people, me included, might prefer a version without…
A 100% 3d printable slingshot, no rubber band required. Three types of TPU bands. Also comes with target with removable plates to customize. Visit 3dPrinterers on maker's world for exclusive models: https://makerworld.com/en/@3DPrinterers
Sling Kontrol - MLOK "by" Qwerm A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using your rifle. Print orientation: Print everything on it's side. Settings used: Layer Height:…
Before starting this model, you need to decide which weapon you wish to construct. If this is for a younger person, think about the nearby environment. I.e. are there a number of buildings/windows within range of an accidental shot? A…
Replaces the original sling plate :) Forward assist: https://www.thingiverse.com/thing:2886570 Mag release: https://www.thingiverse.com/thing:2886262 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter…
Just a simple slingshot Category: Gadgets
Finger slingshot. Just use a rubberband or hairband and let's go. It's disigned with a 22mm diameter. I would recommend printing with 0,1mm layers and PLA.
The X-Shot MPP is an almost perfect blaster. But it definitely lacks a slingmount option. I didn't find any files online, so I simply created one myself. You can just add it to the blaster by putting it onto the buffertube and fasten the…
Modeled with a ultra-thin void to force internal walls regardless of infill settings. This provides reinforcement regardless of infill settings. I printed in PETG-CF with 6 walls and 25% gyroid infill. Very strong!
This is a helicopter that rotates when falling towards the earth and consequently falls slower than a stone. A slingshot is included to bring the device up to altitude. A rubber band is needed for the Slingshot. Print Settings: Use a…
A small slingshot for your pocket, you just need to add a rubberband!
Buffer Plate Sling Mount for the Nexus Pro hardware needed: 1 5mm x 20 mm bolt, with a head no wider than 8.5mm 1 5mm nut with 8mm wrench flats don't overtighten, your buffer tube is made of plastic Update: uploaded a .step file of the…
efoil Motorpod 6374/6384/63100 Mast: Slingshot, Axis, Gong V2 Screws: 4xM3X8 / 2x M4x45 / 4x M4x30 Nuts: 2xM4 / 4xM3 Motorbase: TPU or PETG Filament: Extrudr PETG-CF…
I know Magpul and many other companies make this type of part. This is a printable one. Drill a hole in the bottom of it and attach with a screw. Or drill a ½" hole (matches the o.d.), and glue/epoxy into place. I printed with ABS at 0.12…
These are "spinner" targets that hang from a string for slingshot, pellet gun, BB gun, or airsoft gun practice. See here for a similar target (no affiliation): https://simple-shot.com/products/spinner-targets The FreeCAD file and target…
The belt holder is made to fit the Yoto Mini with a silicone case. The sling adapter was made to fit this. https://www.amazon.com/dp/B093R3VM9F?psc=1&ref=ppx_yo2ov_dt_b_product_details I made this using PETG. My first iteration was PLA…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
Wanted an orange peeler given the amount of oranges I bought for the festive season. Thought I'd print out a more unusual one for fun :) Had the idea of altering the sling ring from Dr Strange. As I had already downloaded one awhile a go…
This is my slingshot Zlin 526 AS in multicolor. I printed it on a Prusa i3 MK2s MultiMaterial. I printed in PLA, but i do recommend PETG, because its more flexible. Add one (normaly only one is needed!!) M10 Nut into the upper-forward…
Don't forget to "Like" & check out my other cool designs. Please, Posting a make when you print this would really help me! I've used these rubbers: https://amzn.to/4dnZbLg But these should also work: https://amzn.to/4ba8gFW You can also…
OTT (Over The Top) slingshot featuring interchangeable grips that let you customize the feel and ergonomics to your preference. Designed specifically for 3D printing – easy to print, no supports required, and comfortable to hold. Ideal…
Its finished and its working... I will maybee adjust some more things in near future. What i used is 32mm long pipe for water (plastic one) and adjust rubber sealing ring on the end. I also used instead of spring rubber from chinesse…
MLOK QD Sling Swivel Mount by DB Firearms. This utilizes QD Socket Heat Inserts by Hyperion 2A Print with PLA+ or better. CF Nylon would be the best for a long lasting piece. Though these have been known to withstand over 200lbs of force…
Two pieces, I used a headband to keep them together Update 10/27/24: Removed the bottom so you can just lift it up without the cards Made the base 33% taller to add room for more cards and increase the slide slant Thicken the stand legs…
The goal of this project was to create a slingshot reel that can cast as far as a regular fishing reel setup. The project was successful because the slingshot reel can cast over 60 feet, is easy to print, and can actually land fish!…