Prusa MK3/MK4 build plate holder - steel plate holder // 3 slots
Remix of the model from grooveup - I just needed 3 slots to hold my build plates.
- Downloads
- 674
- Likes
- 51
- Rating
- 4.93
949 models
Remix of the model from grooveup - I just needed 3 slots to hold my build plates.
Car glasses holder for credit card slots in my VW ID.4
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
The Volkswagen ID.4 has two credit card slots on top of the center console. These two slots are ideal for attaching a phone mount. The design has two slots in the stand, accordingly, where two printed cards can be inserted appropriately.…
Remix of the N64 cartridge trays, fitting 10 positions instead of 6.
I liked SmilingImpact's 10-24 bolt and nut design but needed a nut short enough to fit 1/8 inch (roughly 3.5mm) nut slots. This nut remix is made to be 3mm tall so it fits easily into slotted parts. From testing, 0.1mm layer height is…
[English] Holder for four Oral-B or compatible electric toothbrush heads. The base has a diameter of 60 mm, providing good stability. Each slot for the brush heads is rectangular, measuring 6.8 x 3.5 mm with a height of 14.8 mm, ensuring…
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
This is a remix of 3 great models I found on Thingiverse and combined certain parts in TinkerCAD. If the Hex Keys don’t fit, you can heat them up with a lighter and push them through. I hope this prints well for you and ask any questions…
These Allen Keys came from the Prusa included Allen wrenches, I also included a .gcode file with a filament switch, to change the label colour
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
This is an update of my original model Brush holder od autora Many24 | Stáhnou STL model zdarma | Printables.com It keeps the same simple and minimalist design, and adds double the slots for the brushes. Print instructions Printed in PLA,…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…
Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…
Printing small models is recommended with a smaller nozzle. If you can't find something you are looking for (slots/nuts/bolts) comment and I may make them. I apologize for the massive size of the files I don't know how to compress them so…
This model is compatible with the lego system.
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
In the original model there were several wall protrusions that I fixed, and I changed the number of hot ends (4x) and slots. I printed with 0.2 layer height, 2x walls, 4x bottom, 4x top, with 15% gyroid infill using Inland PLA Tough. Let…
Keep your kitchen tidy with this remixed, larger organizer – perfect for cooking mix packets like Knorr Fix , Maggi Fix , and other seasoning or sauce sachets. 🍝🌿 🧱 The insert features 8 compartments: • 5 standard-depth slots • 3 deeper…
SMALLER Organizer for USB cables and chargers - 5 slots | REMIX 5 slots instead of 10 | +1.5cm-version | rounded edges | EU/US/UK Charger versions note: Reduced the slots from 10 to 5 and rounded some edges. Also there is an additional…
I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.
Follow the original instruction with my STL or use the 3mf to print it
Bullet quiver that holds two extra 308 cartridges to the side of your rifle. I designed mine to fit the side of my KRG Bravo chassis screw locations, however these will fit standard m-lok slots using t-nuts similar to what can be…
This simple trash bag dispenser is designed to seamlessly integrate with the openGrid system using openConnect slots for mounting. The default diameter of 54 mm is chosen to leave a small gap between adjacent dispensers when mounted side…
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…
Vertical stand for the PS5 Slim Digital Version with slots to store the small plastic supports and screw plug. As stated in the original model page, the following hardware is required: M3 x 12 (tested) or M3 x 14 (tested)
After printing yourunwelcome's nice design for full-sized DIMMS, I modified the design to accommodate SODIMM, laptop RAM. DDR3 and DDR4 are different widths so I made it half and half. If you print two to use one as a lid, make sure you…
This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
I wanted a 14 slot comb, so made this remix of https://www.thingiverse.com/thing:4205894 Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports: No Resolution: .3 Infill: 7 Filament: hatchbox…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
This is a quick remix of the 5-slot Bambu Lab build plate holder by @ag_atlpe_362886 – just with four slots instead of five. The reason for this is simply that this is the maximum number of slots that fits in the space I have available.…
A holder for 4 Creality K1 build plates.
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
Simple 3 and 5 build plate holder for Ikea Platsa Cabinet. Pre-drilled holes. Needed 20mm screws. Added two differents sizes, for 3 and 5 plates. And modified with holes design. Updated using internal pre-drilled holes on platsa. Printed…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
As part of a project I undertook to DIY (design-it-yourself) a modular EggBot-style robot from scratch using some parts I had on hand, I decided to use T-slot 8020-style profile as my base to allow for adjustments. Two issues were…
NOTICE: The 30th anniversary mini tins are less tall than the regular mini tins. I have updated the NEW model to shave off 0.2mm to accomodate these tins. Pokemon mini tin insert that can carry up to 12 condition makers. 6 on each side.…
Dimensions: Outer Diameter: 6" (152.4mm) Overall Height: 1.5" (38.1mm) Cutout Depth: 1.25" (31.75mm) **Cutout Width: 0.16" (4.1mm) UPDATED V2 from 3.2mm
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
4 slots remix of the original design
This is a holder and display for NES Cartridges. It will hold 10 cartridges total, and each are angled at 7.5 degrees to help prevent any slip out. Designed with small indentions on the top and bottom for small rubber feet, and stacking…
I liked the design of the original bed holder, and because I attached it to the side of my X1C, the extension of the ‘base’ was unnecessary for me - so I did a quick ‘chop’ of it in Bambu Studio for it to fit nicer on the build plate. For…
SDD - HDD 2.5 Storage Tray x5 / x9 / x10 slots - Basetta per HDD-SDD a 5/9/10 posizioni 75x107mm x 5 Slots 93x107mm x 9 Slots 87x113mm x 10 Slots Easy to print, optimized filament usage Update 22/01/2025: added HDD_SSD Storage Tray S2.stl…
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
The original gridfinity designs have a small error where a circle is attempted to be printed in mid air while extruding the screw holes area. Without supports this causes both the screw and magnet holes to be unusable without some extra…
For my vise mounting solution I "borrowed" T-nuts from another accessory and I don't like to collect parts when I work on something. As the claws are light duty use anyhow the T-nuts could also be made from plastic. Quick design, tested…
This is a modified version of the yarn carrier guide of the CSM version which JeepingJohnny introduced. The idea is based on KaitlynABCs remix. In my case, I had the problem that the yarn was fed a little uneven through the big whole on…
Print the parts. The handle horizontally on the print bed. Apply soft tape to the spot where the sandpaper or emery cloth will be applied (white in the picture). Cut sandpaper or linen 10 mm wide. Assemble the whole thing with M4 tread…
Help me to collect more bricks! Donate me on BuyMeaCoffee.com ☕ __________________________________________________________________________________ How to? Print it on 0.2mm layer height with 15% infil. If you have textured bed you can…
Honeycomb wallet 9 slots Simple & elegant 9 slot (card) wallet. Use shiny filament so it stands out And if you like my work please follow and support. Thank you beforehand!:) If you enjoy my content by me a coffee. Thank you for support…
I added more cable slots to make room for 7
Remix of the Sega Genesis / Megadrive cartridge trays, fitting 10 positions instead of 6. Note: Some cartridges may fit snugly due to variances in original manufacturing. Don't force your cartridge into a slot.
The ball Buddy pro model requires a multi-filament printer for the living flex hinge. A fun ball marking tool that allows for interchangeable stencils. Consists of two ball holder halves connected with a flex hinge (requires a flex…
I made slider slots 2mm shorter so it seem to work even better - triggered sliders now does not end in the middle of the slot, but at the left end. Instructions: Download this base Download large and small pivot from Kenneth's model…
A simple box/stand to hold 10 clipper guards (designed for 1.5 - 25mm guards) Internal width is 52mm Smallest slot is 10mm, largest is 34mm.
Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of a remix. This remix baseplates can have magnets installed without using super glue. You'll want the source found here:…
#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out” https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots A quick and easy to print microSD card holder for the Steam…
Yet another Poop Chute for Bambu Lab P1P - Vase Mode Remixed from Poop Chute Large Magnetic for Bambu Lab X1 Carbon Features: Vase mode: ON Filament: PETG 66g Wall line width: 0.7mm suggested Layer height: 0.2mm Notice: Because of the…
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
Remixed to add slots for the cord. The original would rotate/tilt on me. This change helps keep the orientation stable.
A simple part to hold all your charging cables in place. Mount it at the wall or anywhere you need it.
Designed in tinkercad with the Honeycomb Grid shape generator. Printed on prusa i3 mk3s with 3 perimeters, 100% infill, 10mm brim, uses about 153g of filament.
I have been using my original universal knife block for about 3 months now. That model took a lot of iteration, and the final top (the bit with the knife slots) that I ended up with was kind of a Frankenstein of all of those iterations.…
Features Up to 7 standard-size cards Added space to help with the extra force needed to open the lid Room for bills and other small objects Lock mechanism Customizable back and front Fully 3D printable 15-second assembly Making tips Use a…
Like the title says, this is to cover up the gaping hole at the backside next to the PCIe slots that is in the original design of the Cooler Master Qube 500 Flatpack. It is actually a bit of a flaw in the otherwise pretty perfect Qube…
Simple quick 2 build plate holder for the Ikea Platsa cabinet fit the pre-drilled holes, screw holes spacing set at 20mm as per Ikea Platsa cabinet. If you have any problems and design failures please comment back your feedback. Version 2…
Spinning Prize Wheel. This is a larger version of my Mini Spinning Prize Wheel. Two versions to choose from. 10 or 14 Prize Slots! Fun customizable prize wheel. Everything is 3D printed. No bearings to buy. This prize wheel is designed…
This allows mounting a slim or deep, full width packout carrier vertically on the sides of any packout with 4 corner rails. I tested it on my 3 drawer and it's a good fit. I used 2x1/8" bar, 12" long without cutting, and it fits very…
Remix for Kobra 3 Build Plates with 268mm x250mm with more Honeycombs reducing the Filamentusage by 15%
Gedruckt wurde das Ganze in PETG von Bavariafilaments auf dem BambuLab X1 Carbon 0,2mm standard Profiel Pei Druck Bett
Update; New revision, got rid of that tiny line and curved the edge that is visible from the front. I liked the original mount, but thought it could use some game storage as well. I took inspiration from the original project, but…
This is a smartphone stand that can be folded and made smaller. This model does not use a screw for the hinge part. The feature is that the claw part supports the smartphone and also has the role of a locking claw when folded. [size when…
I designed this originally for Tamiya Mini 4WD Hobby, I think now is a perfect time to get organized as we have lots of time to tinker around. Print instructions Resolution - 0.28 Vertical Shells - 2 Horizontal Shells - 2 Infill - 5% PETG…
best if printed on its back supports shouldn't be necessary tell me what you think
I modified the popular BTT Pi case to suit my needs.
I made this custom to hold all of our pot lids and keep them organized. I have included the STEP file so you can change it up. I designed these around hexclad lids that have a 10mm lip that does into the pot and a 4mm outer rim. It's a…
2026 update: added shorter version for MK4s buildplate, compatibility for MMU3 need to be tested. I don have MMU3 so please someone who can, please report back. These custom drawers for the Prusa MK4S add several practical functions to…
What it says, takes containers up to 13.5x13.5x70-ish millimeters, that covered all that I had at hand. I use this for new endmills and keep the ones currently in use in the endmill tray you can find in my uploads. The design goal here…
Présentoirs de 10 jeux NES Modèle “Lisse” ne dispose pas d'écriture 0.8 et 1.6 sont les millimètre d'extrusion des caractères. Les 2 fichiers lisse (original).SLDPRT et fin 0.8 (original).SLDPRT sont les originaux pour d'éventuels…
Based on Zack Freedman's Gridfinity "Templates.f3d" file. Per a request I've expanded my 5-slot model for 7-slots. If you like this design then click here to check out my other uploads. Happy printing!
Remix of DustBunny67's clamp pads. models from scratch ( Fusion 360 files attached) . The original Pads had slightly different slots so the Outer pads did not fit the Aldi clamps I had. I have made them match and beefed up the tips. Print…
This 3D printed controller stand is designed to securely hold an Xbox controller while also providing integrated storage for up to 5 AA batteries , keeping your gaming setup organized and efficient. Printed in wood PLA filament , the…
This is a sci-fi inspired case I designed for my m920p to fit a two slut graphics card. And also a custom cooler I designed that’s integrates the 80mm Fan together with the case. there is also a bottom cover. that will introduce a little…
This model is compatible with the lego system.
Wii Remote Holder for Wiimote and Nunchucks. 4 Slots for the remotes
edited model with pocket clip screw hole
A simple case for LP-E12 batteries, used by the Canon EOS M50 for example. It can hold 4 batteries which should fit snugly. You can see a timelapse of my print here: https://youtu.be/Xd44k17qnrE
Remix with 2 sd and 3 micro sd slots
Parametric pill box for a week with 3 slots per day. Attaching the .f3d file, where you can adjust width, length, and depth of the box (see the pic with user parameters). To print, split the .stl into objects. Lids are designed to be…
I put this design together recently for a commissioned job, and I'm sharing a generic version of it here. I plan to use these at my booth at an upcoming Makerfest. Provided is a frame for a simple “tent”-style table sign and a basic…
The parent system is neat, but it contained no way to slot tools like try or machinist squares and digital angle rulers on wall control panels. Additionally, I found some of the sidepiece flats and pins in the parent to have hooks that…
Design Concept This plant stand features a simple and elegant 2-slot structure, providing a sturdy platform for displaying multiple potted plants in a small footprint. Use Ideal for home or office spaces, this stand helps create a green…