Stan Smith from American Dad
Stan Smith From American Dad.
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant
- Downloads
- 331
- Likes
- 88
- Rating
- 5
706 models
Stan Smith From American Dad.
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant
printed in PLA, probably could be printed in TPU as well. Try printing without support.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to fly these cool UMX planes and micro helicopters with my Jeti DS Transmitter. So I built a box to fit the Organge Module from HK (OrangeRX DSMX/DSM2/Devo 2.4Ghz Switchable Transmitter Module V2.0 JR/Turnigy/Taranis/Walkera…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/ NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT Resolution: <= .28 Infill: >=20% Filament material: PLA Print with brim…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
Transmitter console The transmitter console consists of several 3D printed parts that are glued together with epoxy resin. It is made to be used with a variety of handheld transmitters. With an optional extension, the console can be…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
The holder slides onto the handle of the DS 24 II. I used a 2.5mm carbon rod as the mast. For the vane, I used tape material from a cassette tape
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Mount for Honeycomb storage wall for the modelcraft GT2 2,4GHz transmitter.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
I used 60 % infill, but don't ask me, I'm noob here :D
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Edit: I saw some people saying the file had some errors in Slic3r. I've uploaded a fixed file. Sorry for the troubles! :) Watch here: https://youtu.be/hX9XGU1L7OY Last time I asked if there were any fans of Rick and Morty out there. It…
All 78 Cards converted to .stl files. unchanged they measure 37x65x1mm with 5min/2gram for 1 card all together the stack should stand at 8cm high. Use your cards wherever you want since they are waterproof when made from plastic :) The…
This is a remix of @LL77's gunsmith bench block, inspired by M*Carbo's gunsmith bench block. I haven't printed this yet, but it should probably be printed with >3 walls, >30% infill, >3 top and bottom layers. I want to tinker with this…
Old collection of models I made for a stylized smithy workshop: https://sketchfab.com/3d-models/smithy-game-graphics-2015-54ce631950c1403bb33d2d81047a3a78 I've upressed these models and added minor texture detail to the surfaces through…
This is a pistol-style RC transmitter based on Arduino . It was created as a simple and budget-friendly alternative to commercial transmitters. It covers the basics and works well for controlling cars, boats, or other models where you…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
I created this one to fit my needs.
A mighty owl-man metal worker adventurer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on…
I broke mine a tiny bit taking the supports off. There are some spots that build plate supports cant reach but its ok. Tree Supports on build plate only Powered by ITree Supports on build plate onlymage-to-3D from MakerWorld…
See https://www.playingwithfusion.com/ for more information, or see assembly instructions on Instructables here .
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Scandinavian Nativity Scene Blacksmith The Bible doesn't mention a blacksmith at the birth of Jesus, so why is he there, hammering away next to the shepherds and the Magi? 1. The Power of "Everyman" The Nativity scene tradition,…
🇺🇸 Welcome to Washington D.C.! In 2020, MiniWorld3D founder Dany Sánchez visited Washington D.C. and became inspired to recreate the National Mall for the MiniWorld3D collection. Here is the first one, the National Museum of Natural…
Each part is easy to replace and relatively fast to print. The entire thing only uses ~60g of filament. A bunch of other cheap jigs are plastic but you can't replace parts that wear out from touching the drill bit. The center gear as well…
An anvil is certainly an integral part of every forge. No blacksmith could do without an anvil.
hell divers 2
N scale blacksmith. I scratch built the HO model, then drew up the N scale model. Building is in Coshocton, Ohio.
A while back a friend gave me a bench block that was 3d printed it broke so I made my own version used 3 Shells and 20% infill 4 holes 3/4"(19.05mm)- 5/8"(15.875mm)- 1/4"(6.35mm) - 3/16" 1 Cut 1/4" (6.35mm) x 1"(25mm) 1"(25mm) Height…
Remix of the transmitter box from Shaladdin's awesome Wireless powered BentoBox (remixed from thrutheframe's BentoBox Air Purifier for X1C). My version of the X1 Carbon (received April '23) has an extended edge which prevents installation…
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
28 pieces, all equal. They fit together without gaps, but form a surprisingly irregular structure. It is an aperiodic tiling of the plane. Roger Penrose made such tilings famous with two or more pieces. David Smith found a tiling with…
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…
Mini 13: Figurine System Compatible Blacksmith Playset including: Work Bench & Stool 2 Brazier Designs Forge Tools including Chisels, Hammers, Bellows, & Tongs Anvil Quench Tank Forgewear Masks
Material: 550g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
A low-profile solution for affixing antifog to protective goggles. I really like the super-low profile airsoft eye protection options (such as the smith optic boogie ventilators), but they all suffer from the same severe fogging issue.…
I got a set of Bob Smith Industries CA glue and needed to store it in an accessable place. I created a 1x4 Gridfinity bin that perfectly holds the 1 Oz bottles of glue and 2 Oz activator. Here is a link to the set I purchased:…
I created a Gamepad RC Controller. The entire build is made of PLA. It is powered by single Li-ion 18650 battery. There are just three types of screws holding it together, which simplifies assembly and maintenance. This controller is not…
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user. Notes: Don't over tighten, it…
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Cap & tip for the Bob smith industries glues. We all know the struggle of tips getting all glued up before the bottle is empty, you can now print your own tips ! :) I also designed a cap to close up the bottle when not used. If you found…
I designed a few simple roof pieces to complement the amazing blacksmith shop model created by Chris. To give the rooftops a more realistic asphalt-like texture, I printed them on a textured build plate. Sure, we could just cut some…
This model is sourced from the 3d-digitization program of the Smithsonian Museum's website . It's available for download in various formats and qualities. I strongly recommend exercising caution when considering the full-resolution scans,…
Housing for an FPV camera incl. transmitter and battery. If you don't have a drone handy, the unit is straightforward to get a camera image from the air. The duration of use can be longer with an e-sailplane model than with a drone. So…
Rack(s) for holding the Xvive U4 In Ear System Transmitters (with cable routing channels for all models). I used some scotch tape to keep the cables in their channels, then mounted with command strips. I’ve included ready to go STL’s for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For some insane reason, I decided to dive into the world of DIY drones by building my own transmitter and some would say the results were catastrophic. In the end, I learned a lot in the process and did successfully build a drone…
RC car transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for all rc car transmitters, it may fit other transmitters, but not guaranteed. I made another model, for…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
Monster from Diablo II Resurrected + Diablo I Slayer edit.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hello everyone, I found that all other GoPro mounts for the Smith Mainline full face helmet mounted the camera on the lower part of the chin, and the camera would sometimes hit my chest and be uncomfortable, so I made my own. All you need…
Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235
I acquired an older model Shopsmith Mark V for next to nothing from a lady while on a service call. Several pieces were missing, one such piece being the coupler that connects the motor to the bandsaw. Shopsmith sells this adapter for…
The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…
dwarf blacksmith statue, sitting on a stone anvil with braided beard and runed hammer.
Arduino NRF24L01-Based 10-Channel RC Transmitter – 3D Printed Case 🔧 Project Overview: A custom 10-channel RC transmitter designed using the Arduino Nano and nRF24L01 wireless module. It includes support for dual joysticks,…
A dwarf mage with long beard glowing with carved runes, holding a floating stone tablet.
Just a wall hanger to keep things organized. Print in PLA without supports.
On wall Rack/Holder for the ShopSmith extension table tubes and legs. This rack uses #8 wood screws to fasten each side to a wall stud (16" apart) and is a nice compact way to store the tubes and legs when not in use. I printed mine out…
A 3D printable dwarf blacksmith fused with his forge anvil, his beard braided into thick rope-like strands that anchor to the base. The model should be a single solid piece, highly detailed but structurally strong, with unusual design…
The walking Dead - Negan Smith
Mount to attach DJI Mic receiver and transmitter to a Canon EOS R. Instead of using my big Videomic Pro+. This way, you can also use the DJI Mic while using a gimbal (in my case a Zhiyun Weebill Lab). V2 has a slightly smaller hotshoe…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com Rate, like & comment . So Roger can finally afford more wigs and questionable disguises! Recommended Print Settings: Layer height: 0.16–0.2 mm Line width:…
Wall mount for Spektrum SLT2 RC car transmitters, that come with lots of Arrma RC cars, e.g. Gorgon, Granite Mega, Fury, Vorteks, Grom series, ... Might also work with similar transmitters from other brands, but not tested. For mounting…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Most of my models are free, but if you want to support me and get access to all models then check out my patreon https://www.patreon.com/warehouseworkshop Patrons have all my models available in one place. You will also have access to the…
TQI Transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for Traxxas TQI transmitter, it may fit other transmitters, but not guaranteed. I made another model, for…
I used the Gridfinity Generator Fusion360 Add-In (linked below) to create this model. https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac
Bandsaw table insert for Shopsmith brand
I designed some fancy switch sleeves for my Taranis QX7. I suspect that they'll fit the X9D and most other radios. Must be printed in a flexible filament. Inspired by these silicone doo-dads: Slicone Transmitter Anti-slipping Stick Switch…
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. doesn't need to show it with…
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
This is a sharpening jig for the Shopsmith lathe chisel set. The intent of this is to replicate the functionality of the sharpening jig that has been discontinued. The sharpening guide allows you to sharpen the Shopsmith lathe chisel set…
Material: 430g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
My daughter (8) has quite small hands for her rc car transmitter (spektrum dx3). This makes it really hard for her to reach reverse by just stretching her finger as there is such a large gap in the trigger. This buffer removes the space…
A remix of Transmit Blocker Baofeng Factory Screws By JULEZ_GERMANY except it allows you to press the black Monitor (MONI) Button because it does not transmit, it just activates the light on press and disables squelch when held down. It…
Case for KY-008 Laser transmitter and reciever
This adapter allows connection of a 2.5" dust collection hose to the top of a Shopsmith Mark V 510, 520, or Mark 7 upper saw guard for overhead dust collection. Based on the concepts and ideas of William H Seward IV. Many thanks to…
Summary The Southern Cross was made famous by Australia's Charles Kingsford Smith's record-breaking flights. (First non-stop crossing of the Australian mainland, Trans-Pacific flight, England to Australia air race). Wikipedia The aircraft…
Shopsmith does not sell this part separately, and I didn't want to buy the pricey “upgrade kit” for just one part. I printed this in both PLA and PETG. Both are acceptable but PETG is the better choice. Increase number of walls to ensure…
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
Insert for Shopsmith cast iron bandsaw table. Slot to the right of center. If you need the slot to the left, simple mirror the 3MF left to right in your slicer. There are three small nubs on the outer rim for sizing. Sand or file for a…
Ranger Smith Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
This is a battery extension box for the RadioLink RC8X RC transmitter. This extension allows you to use more widely available rechargeable batteries, like the 2 cell battery packs that use the 18650 cell type batteries. Those battery…
I designed this part to connect the motor on my shopsmith to the bandsaw. it was designed parametrically in fusion 360. so you can adjust for the desired fit. if your shop smith has 4 splines on each side, you can adjust the number of…
Chin mounts for Smith Mainline helmet to gopro style camera mount. This was made from a scan of the helmet so the contour matches very well. I recommend printing these in PETG or ABS/ASA but I've been rocking a PLA one and it seems to…
Yet another grippy… but this one's kinda nice. ;) I printed with Siraya Blu on a Sonic Mini 4k printer, using Siraya recommended settings (4.5sec exposure, etc). The holes for standard brass threaded inserts are exact size. Inserts press…
Simple protective cover for the HSE2-868-BS Hörmann hand-held transmitter. In my case, the holder for the lower part broke off. This keeps it in place. The cover also protects against fall damage, as this is how I damaged the lower part.…
just use bridgemode zo print it looks best in 0,12 Have fun
Rock Bands - Aerosmith - Steven Tyler 3D printable model.
Bullsmith By: David Orlo The Bullsmith Story In the Skull King's army, there is one warrior whose appearance might fool the unwise—an imposing figure with massive bull horns and a fierce gaze that seems to pierce through lies. They call…
Blacksmith Anvil in 1:24 Playmobil Diorama Compatible scale & 1:12 Dollhouse scale. Printed in creality gray PLA. The 1:24 Playmobil Compatible scale anvil printed okay with no supports, but the larger 1:12 Dollhouse scale needed…
Work-In-Progress: 23.05.17 add dx5e mount file My mini transmitter 162x130x40 mm. on AR Uni board ( https://www.rcgroups.com/forums/showthread.php?2570260-ARUni-AR-Universal-board ) I use frsky XJT transmitter & DX5e DSMX module. For…
Wesołych świąt Tępe C**je! Zobacz inne foremki → TUTAJ EN: Sultan of the Aliens (xD) - one of the main characters from Bartosz Walaszek's animation series "Kapitan Bomba," in the form of a cookie cutter design.