Sprocket guard CRF Honda
Sprocket protection compatible with 250 CRF and CRF RX 2019 -2021 Original reference: 23810K95A20 Print in PETG, TPU, ASA 100% infill with backing
- Downloads
- 741
- Likes
- 55
- Rating
- 0
146 models
Sprocket protection compatible with 250 CRF and CRF RX 2019 -2021 Original reference: 23810K95A20 Print in PETG, TPU, ASA 100% infill with backing
I fixed the part with small wood screws.
This 9mm pitch roller chain prints up quickly (about 2.5 min/link) and assembles easily. Most importantly, the links are designed so that the tensile stress is aligned with the print lines (rather than across the print lines) for maximum…
The easiest way to start camera scanning. Do you have boxes of old negatives that you've been wanting to preserve but never got around to it? Are you tired of outdated, slow flatbed film scanners that take hours to scan a few rolls of…
Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…
5 sprocket with various teeth number - module 3 (pitch 9.42mm) to be optionally used in combination with sprocketand pinion https://www.printables.com/model/1266062-rack-and-pinion-module-3 Printed with Flashforge Adventurer 5M Pro…
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
420 roller chain, chain lock included 42 links 53,3 cm 84 links 106,7 cm 168 links 213,4 cm Also made a 102x102 mm version for smaller printbeds Sprockets: 9T,11T,12T,36T,48T You have to break off the two ends so you get two "female"…
Sprocket with 12mm hole, 15mm tooth width, 30mm total width Distance between pinion center and rack base 37.5mm Printed with Flashforge Adventurer 5M Pro rotating stl 45 degrees Print as oriented Supports: no Resolution: 0.2mm Nozles:…
Print two of these half-sprockets flat side down (no supports needed) and then superglue them together. Don't use too much superglue! Depending on your printers accuracy you may need to clean up the 6 pin holes with a 4.8mm drill bit and…
I developed a chain and sprocket system for my Chain Conveyor For Bambu Poop . I'm publishing the chain, sprocket and shaft elements separately for use in other projects. The chain is strong and flexible and all components are…
This model is compatible with the lego system.
This model contains a bunch of different parts to create modular chain drives specific to 3:2 aspect ratio. The original FreeCAD project file is included. It's original scale (100%) results in chain rolls being 12mm apart and 8mm in…
--- Import from Thingiverse / Reupload This was my very first design some years ago and what started my 3d-printing journey. We don't have this planer anymore but this model may still be of use to someone. I also added my original…
Remixed design from William H. Compatible with Technic Lego chain and a DC motor with a 2.3 mm shaft. Long enough hub width for no adhesive on the dc motor.
Chain and sprocket are mechanical components used in drivetrains. The chain is a series of interconnected links that transmit motion and rotational force between two toothed wheels, called sprockets. Sprockets, also known as gears, have…
This is a remix of the original 35mm film spool ( https://www.thingiverse.com/thing:28236 ). In my version, I made it possible to generate spools of virtually any size. Usage is quite self explanatory. Since I never learned to program in…
Sprocket with 12mm hole, 15mm tooth width, 30mm total width Distance between pinion center and rack base 37.5mm Rack with head holes for centering pins in case you want to join two or more racks Printed with Flashforge Adventurer 5M Pro…
Specific sprocket wheel for camera movment.
Lego sprocket mini 57520. Printed accurately using PLA and standard 0.4mm nozzle print. Require support. Tested print on high resolution 0.12mm and 0.2mm layer height, no difference. Infill support is 40-50%. Print Settings Printer Brand:…
For bike maintenance you may take off your rear wheel. Normally then your chain rubs on the frame which we obviously don't like to be scratched and all messed up. Therefore you can use this gear and slide it on your through axle without…
This scraper works with 8, 9 and 10 Speed Cassettes. Maybe also with 11 speed, but I haven't tested that yet. Since the gap between the sprockets is a bit different on different speed cassets, there are 2 files for the middle part of the…
Remixed design from William H. 48 tooth sprocket compatible with Technic Lego chain and a 1/2" diameter shaft. Long enough hub width for no adhesive on the shaft.
This sprockets can be used for my drive chain. https://www.printables.com/de/model/927523-drive-chain/files --------------------------------------------------------- Diese Kennräder können zusammen mit meiner Kette verwendet werden.…
Fidget Chain & Sprockets Toy Chain clips together. 22 Chain links required. Note: Check chain orientation as there is a flat surface on one side. This flat side should face outside the fidget. This flat side is to ensure printability.…
Tool for removal and installation of the AVCS intake cam sprockets . Perfect tool for cam seal renewal, cylinder head removal, or motor tear downs. I've had 3/8" and ½" drive holes to use with ratchet but ain't necessary. Compatible with:…
Le porte-clé pignons Ce porte-clé est constitué de 3 pignons, 2 identique et 1 central plus petit. Le 3eme pignon sort du porte clé et en le tournant il entraîne les deux autres…, un passetemps idéal pour se détendre… Le fichier contient…
A sprocket is a toothed wheel used in drive mechanisms that works with a chain, toothed belt, or other perforated material to transfer rotational motion and force. Sprockets are commonly used in bicycles, motorcycles, industrial…
A 135 Xpan Film scanning Mask comoatible with the Valoi 360 Advancer to scan Xpan and 35mm with sprockets. Print in Matte Black filament for best results, i used 0.28 layerheight and it worked well.
Photo frame for HP Sprocket Select 5,8x8,6cm (2.3 x 3.4 in) Print instructions 0.2 layer height, 15% infill, no support.
This is a custom sprocket wheel compatible with Lego Technic tracks. Prints without supports. To assemble the 10x sprocket you need 3x M3x10 screws. The 5x thin sprocket needs no assembly. There is also a "free run wheel" included to…
sprocket cover for a DRZ 400 Ritzel Abdeckung für eine DRZ 400 Remove the sleeves from the original cover and press them into the new one Die hülsen von der Original Abdeckung ausbauen und in die neue Einpressen Settings: Supports: Yes…
sprocket photo frame and storage for zink 50x76mm (2x3inch) photos, includes storage box for 15 frames, and a holder for 3 boxes .4 nozzle .20 layer height 10% gyroid infill notes includes bambu studio 3mf files and STLs all photos…
Parametrized FreeCad file for designing cogged belt with matching sprockets. Choose belt pitch, sprocket sizes, axle distance, etc., and printable parts are automatically designed and exportable as .stl files.
This includes a sprocket and treads for any model rover or rc vehicle you may be creating. Treads- The treads are easily linked together using standard filament meaning anyone who is able to print them can also assemble a link of treads…
This is a remix for Staind's rc tank. It's a merge of oger's "Wheels with groove and colored insert" and edwardchew's "Staind RC Tank Track Wheel w/o sprocket - Critical Update" All credits go to the designers mentioned above. Head to…
Imported from my designs on Thingiverse. Original upload was 22.12.2018 (dd.mm.yyyy) This is a sprocket for Lego Technic tracks. It works great. No cogging. I approached this model a few different ways. I later found out that the space…
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 35 x 56 mm, wenn man den Kleinbildfilm mit den Sprocketholes belichten will. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs…
This adapter is for mounting a sprocket for a gas powered bicycle on the rear wheel. This keeps the sprocket centered and in alignment when installing. Much easier to use than the traditional rubber spacers from gas bicycle kits. Use…
Prevents the chain from coming off and pants/laces from catching in the gear. This model is cut in half so you can print it on the mini. You will need screws to assemble the halves (see instructions). Dimensions of my sprocket: inner…
This model was designed for use in Lego-based film photography projects. Sizing: The teeth are the correct pitch for 35mm film with standard sprocket holes. The central hole fits Lego Technic axles, and is sized to slide on the axle but…
Reduced sprocket, in addition, a suitably adapted pocket. 3.3mm holes prepared for inserts M3
This is an replacement adjustment sprocket for the back headgear of a Chicago Electric welding helmet. Our shop helmet is heavily used during the farming season, and this was a cheap and fast 20 minute print fix, instead of driving to buy…
BCD (Bolt Circle Diameter) : 122 mm It has the same size than a normal sprocket (3 mm deep) and has five 10 mm holes with 12 x 1 mm counterbore. See picture for the other dimensions. I printed this sprocket guard to fit on my vintage…
I designed a sprocket wheel for a curtain chain. This wheel can be connected to a shaft of a actuater. dimensions of the chain: diameter balls: 3.5mm Dimensions Sprocket Wheel: Diameter holes: 3.5mm Amount of holes: 35 Diameter Wheel: 33…
Sprockets compatible with Lego. Pitch is 12mm and most work well, but 4T and 5T is maybe a bit too small. Print with support. I used auto support. If you want a custom lego piece. Send me a message, and I'll see what I can do UPDATE…
More sizes yet to come… For additional gears and compatible components, see: Gearset Collection Pivot: Bolt and Bearing Collection If you're enjoying models like this, please consider supporting us on Patreon so we can continue making…
This sprocket was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5LaDMOUHs6v For 3mm ball chain Easy print Category: 3D Printing
Extendable Z20 barrel sprocket to be used with fischertechnik. The barrel ends may be used with the regular fischertechnik nr 35113 collet. The barrel can be extented with additional 10mm extentions on a 4mm axle. I needed the barrel for…
Photo frame for HP Sprocket 5,8x8,6cm (2.3 x 3.4 in). Add two 5x3 mm magnets in the back to use as a fridge magnet for your photos. The frame has a foldable stand at the back to easily place on the table. The hinge uses a small piece of…
Kyosho Blizzard sprocket mod: Here's the mod I did for the Kyosho Blizzard sprocket. It prevents snow packing up in the area between the sprocket teeth. When snow packs up there, the part becomes a big ice cylinder, and doesn't drive the…
Introduction: Whoever owns a folding handcart probably knows the problem with the break system. After some days of use my break sprockets looked like this: I used the handcart of FUXTEC model CT700. The model has in total 4 of those…
Imported from my designs on Thingiverse. Original upload was 22.07.2019 (dd.mm.yyyy) I do most mechanical design. Can do easy basic patching. I totally forgot I had these. The files are from January 2019 They should work fine, but give me…
The sprocket mod is great, if you've got plastic tracks... The metal tracks don't have the center bands so they fall into the gaps and get stuck. This mod of the mod adds a thin disk at the center to prevent that. Print in PETG or Nylon…
A complete set formed from track and sprocket, easy to print. I used TPE for the track and PLA for the sprocket and idler wheel. There are 2 versions of the track. With right angle internal threads and with tappered internal threads. I…
UPDATE: Version 2 uploaded. Slightly better clearance to derailleur, bigger internal hole. Printed in grey PETG My bike lost the chain ring guard in a particularly nasty crash and while I rode for a few years without it, I never got used…
Copripignone Beta rr 50cc , fatto copiando la parte originale Beta OEM. Stampare preferibilmente in abs (considerando che il pezzo è soggetto a temperatura maggiori di 50 °C). Sono nuovo nel mondo della progettazione 3d, se hai problema…
I had trouble finding a chain guard for my bicycle on the market. I checked a couple of second-hand shops and local stores but came up empty-handed. Eventually, I was left with one option: 3D printing. I wasn’t in the mood to disassemble…
Why you should print it: The assembly is very easy and only requires one drop (more like a dab) of glue There is an ergonomic grip and handle to maximise rotating speed It can be printed on an a1 mini and has a very portable form factor I…
Needed an adapter to mount cheap sprocket from AliExpress on girlfriends dirt jump bike. Model parameters are set for Norco One25 which uses a bmx “mid” style bottom bracket with 19mm crank spindle. Testing with PLA first, but will…
Konnte keine passende Schachtel für die 35 x 56 mm Maske für die Hasselblad V-Serie finden, also hab ich eine gemacht. Innenabmessungen: 60 x 60 mm, 3 mm Höhe. Gedruckt mit PLA mit 0,1 mm Schichthöhe wegen der feinen Nasen die in die Nut…
I've used bolt-on style printed pullies and sprockets for years now, but lately I've been experimenting with different custom drive systems and branched out into the word of press/push fit hub adapters. As you all know, 3D printed parts…
This is a drink coaster I made with the Honda logo in the shape of a sprocket.
Wall sprocket with the Moto Guzzi logo. On my Bambu P1S to get the fine detail for the eagle you will have to print this with a 0.2mm nozzle to get the fine detail to show clearly. Even if you make it bigger it will not be perfect. The…
I needed different size Chainrings to check clearences and because I wanted to learn more about the Parametric feature in Fusion360, I made a parametric Chainring. It's for a normal (12.7mm Pitch) Bicycle chain. I did print some Idlers…
This is the coupler that connects the motor and the screw rod for a garage door. it should fit all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and…
Great Spool holder for MPSM. Works super well with: http://www.thingiverse.com/thing:2192876 This can also be used with a rod and Bearing set-up.
The crank sprocket used in my case for the Parkside laser level holder
For the Buell fanatic in all of us (and I know you're out there), there are some essential tools for the DIY mechanic. This is one of 'em... but this simple gizmo costs quite a fortune:…
When upgrading a stock Razor MX650 SX500 or Indian eFTR Jr with a Kunray/Vevor type motor, the chain path is no longer straight due to the motor shaft is slightly longer than stock. This spacer moves the rear sprocket more in line with…
Print Setting .2 layer 10% or more infill any material no supports
This is a model to test dimensions, I intend to mill this out of steel for use with a bike shifter on a crazy cart
This is a print I made for my little sister. Her bike needs a cover for the rear sprocket to stop her hands and feet getting caught in the chain. So I printed one, It has her name and is easily customisable. Both files attached, Basic is…
Printed with 50% infill. For best strength use PETG or harder filament. PLA works for minor impacts.
sprocket 19T NYLON AND ABS
This is a 12-teeth sprocket designed to work seamlessly with a modular chain system. The sprocket comes with an integrated bearing housing, allowing for smooth rotation and durability under load. This makes it ideal for various mechanical…
I wanted to share a useful tool for those of you working on Porsche Aircooled engines — a 3D printable camshaft gear alignment tool . It’s designed to help you align the camshaft gears accurately during engine assembly.
Honda Montesa Cota 4RT 260/300RR/301RR reinforced rear sprocket guard with M logo, printable as single or multicolored part (see picture below). Update 14. Sep. 2025: Added an enforced Version with Montesa 2026 design. Printing…
A set of sprockets and threaded track
Sprocket cover for a Liftmaster of Chamberlain garage door opener. Part number 03100380 This cover is to protect the sprocket the runs the chain on the top of the garage door opener. Print Settings Printer Brand: Creality Printer: Ender 3…
This is a replacement sprocket for Philips Marantz CD Players. No supports necessary for printing. Feel free to remix th
WARNING! These masks are not directly compatible with the 120 backs, the screw holes are in slightly different locations
One tooth larger drive sprocket to compensate for track stretch. Also includes a taller tooth to prevent track slipping
In this simple frame you can stick your HP Sprocket Plus Prints and put them on the wall. Works best with nice pictures, e.g. of your prusa printer.
I had trouble aligning my timing chain cover to align perfectly with the crankshaft. Loosely mounted timing chain cover and slipped this over the crankshaft snout. It is a very snug fit for limited play. I also used it to help drive my…
Had to 3d pring one for a larger sprocket while I wait for the larger one to come in the mail Metal one is better (obviously), however, in a pinch, this will do Category: Automotive
I have provided both the combined design and split so you can print in a single material or color or different colors or materials. Print scaled to 50% to get correct dimensions
The Tiger 1 from 3dprintedtanks is a fantastic model. This part remix aims to make it even better and more resilient. Extra hardware required are a M4x80 countersunk screw, an M4 lock nut, and two M4x10 grub screws. It is recommended to…
Disclaimer This is made for a very specific salvaged sprocket and an old bike wheel, use this as more of a guide to model your own. - thats why the project files are included (fusion360) It should center itself pretty neatly thanks to a…
The name says it all... 6120-603804-72 Yardworks Lawnmower sprocket The original part stripped a long time ago. That said, if you print it, print it solid or with a lot of infill. If it skips or slide, stop right away the mowing; PLA or…
At 14t on a motor and 42t on the wheel, you end up with a gear ratio of 1:3. I imported an stl out of openSCAD after setting up the HDT 5M parameters, then added the flanges to mount to the onda motor. I'm very amature at 3d modeling, so…
Front sprocket protector specifically designed for a 2013 tm racing enduro 125cc 2 stroke bike, printed with 100% infill. the logo does look kinda ugly tbh, if anyone wants one with no logo i can send it to you.
Front sprocket cover for a Honda CB-1. This way you can print a lighter version than the original. I used the Honda logo design from this file from motorheadv10 on Thingiverse: https://www.thingiverse.com/thing:492219
Similar to the drive gear here: Replaces a lost or broken tip sprocket.
Printed in ABS with supports for 6t and 9t, without supports for 12t Scale the Step files to 10%!!