107 models
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
Print approx. €11.28–€13.79 excl. taxPreliminary estimate for PETGSource material: PET
I Remixed the Steamclip - Steamdeck Attachment System - VESA Attachment by Mike Brumm to create a dock where I could attach my battery my steam deck and my Anker A8352 hub. I borrowed pieces from different sources to create this dock that…
Print approx. €18.83–€23.01 excl. taxPreliminary estimate for PETGSource material: PET
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Inspired by JordanKs design, yet remodelled from scratch. Can hold the EU plug and 2 SDs tidily. Can also work as a stand. No warranty if it damages your Deck, though. Have fun.
This cover is designed to prevent damage to the analog sticks and touchpad in a commuter train bag. It consists of three parts, but it is made by simply plugging it in. Support is necessary when printing. if only the bottom tip is made of…
Display your favourite handhelds! I was horrified by big chunky stands so I've made one myself! I have tested it with Steamdeck, PSP, PSVITA, New 2ds XL and DS. It could not work for other handhelds Share your pictures if it worked for…
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a…
This is a quick design to mount a portable monitor on top of the Steamdeck for on the go productivity. The monitor is a 13.3-inch Intehill OLED Portable Monitor. The portable monitor bracket has 9mm spacing. Other monitors might need…
2 Parted Keycap to make use of the Keyboard Backlight. The Keycap Base can be pressed in the Keycap and will stay in place - no glue needed. I made following Logos: Arch Linux Ubuntu SteamDeckOS Linux Mint Manjaro Fedora CachyOS May i…
This is a battery attachment for the Steamclip. It is designed for a Baseus 20000 mah unit. This uses a 0.5x5x15mm spring. I will be uploading more models, but please check out my Etsy page MyRandomHobbies for more attachments.
This is the main body for my Steamdeck Clip system "Steamclip" V2 includes a kickstand and SD card storage. You'll need a 1mm metal rod for the kickstand and sd card storage. I used a 1mmx100mm steel rod and cut it to length. I'd also…
This is a simple carrying case for the SteamDeck OLED cable. While the original one from JordanK is a great design, it unfortunately doesn't work well for the OLED due to the extra 1m of cable that comes with the OLED Charger. This case…
Steamdeck Stand Remix. This was split to fit on bed and dowels fitted. The whole unit then glued together. This also works with my silicone case.
Welcome to the Nintendo Switch Holder for Rivian 2.0! This refresh is specifically designed to make printing easier while also making it look more aesthetically pleasing. Smoothing the edges, and widening the sides for a flat bottom. The…
I wanted a carry case insert that can hold the original charger or the charger dock brick that I use. Here is a link to the charger dock I have, which this 3D print fits. This insert can also be used as a steam Deck stand!…
This Steam Deck dock is designed for Dockteck branded 7in1 USB-C hub with 4k 60hz hdmi output. (Amazon link at bottom). To mount the hub, you simply slide it in. Two versions, one with the hub tilted at an angle and another with the hub…
For the Baseus Adaman Powerbank (PPADM65 20,000mah) v1.1 fixes some double geometry that was present in the original model. Slightly increased tolerances, which should make it grip the Steamdeck and the Powerbank better. Inspired by…
This is a trimmed-down version of the Steam Velcro Strap Brace for Power Banks modified by making it for the Killswitch case by Dbrand. If you own a Killswitch case you no longer need to use deckmate accessories, just attach the item you…
A stand for the Steamdeck. I also added a holder for AlzaPower USB-C Dock Station 7v1 , but if you download the Blender file, you can edit it to fit whatever hub you have very easily. Just make sure that all your ports are on one side! I…
THX @ https://www.printables.com/de/@JordanK i see your verry nice print and must add the Steamlogo to make it for me perfect
EDIT** I've added the files marked final to make it slightly bigger so that I could align it to utilize 2 JSAUX 90 Degree Right Angle adapters. They can be found here:…
Variously textured grips for the Steam Deck, remixed from PsykomantaBrain's Mk2 version . (Thanks Psy!) Haven't tested the prints myself yet, might be a good idea to scale it up an extra .5%-1% (or sand it down) to account for the weird…
A snap-together version of the Steamdeck dock. This variant is currently untested Changelog -v2 released: revised geometry based on user feedback for easier assembly
Very easy, stable and fast to print SteamDeck stand. Suits OLED and LCD version. You can put it in your case (behind this strip on the back of case) Print 2 times
After installing the Spigen Rugged Armor Protective Case onto my SteamDeck, I noticed the deck sits a bit higher up while in the case and the thumbsticks could be pressed while the case was closed. I designed these cover caps that fit…
Printed this excellent stand to allow for desktop like gaming on my SteamDeck. A few small modifications were required for the JSAUX ModCase and my ZSUS 14" 2k monitor. Printed in ESUN PLA+, 4 wall loops, 15% gyroid infill.
This is my first ever remix, hope it works for you Printed in pla with 15% infill, with supports
Modular Steam Deck Docking Station This is a Docking Station for the Steam Deck. On back side are grooves which allow you to create your on mounts for 3rd-party docking stations from Amazon, Banggood, etc. Just print the docking station…
I remixed the original design from Neebick for my EU Samsung 45W Charger (EP-TA 845). And made some adjustments for my needs: added the space for the EU Samsung charger removed the rails for the lid, I dont wanted to have another part…
Recommend to print with PETG No support needed Print orientation: please reference with prusaslicer photos attached I printed with PETG-5%CF, 4 Parameter and 25% infill, which is completely over killed.
A mount that works with the Deckmate to hang your Steamdeck on your Skadis pegboard. Uses M3x22 screws and M3 Knurls in the Deckmate.
This uses the base of another model, but adjusted to add a small mount for jsaux mod case attachments. I made this one a bit longer than the mod case to use for a clone hero guitar attachment model. I may come back and shorten it so it…
Hello, this is a nice helpful Stand that was remixed from titusou, I added some more room to fit also the Steamdeck I am happy if it is useful to you, Cheers ;)
Designed to work with Nestea's Steam deck stand . I wanted to create a mount to firmly connect my steam deck to a small PCB keyboard for desktop use (and to have a good charging location). Add rubber feet on the PCB to avoid sliding. I'm…
This is a mold box to create a two-part silicone mold of the four action buttons found on the SteamDeck. There's a write-up about all of this here .
Dock for the Steam Deck designed to fit Anker 6-in-1 hub. Note: A 90 Degree Right Angle Type-C Male to Type-C Female Adapter is required to reach the cable to the Deck. There is space for the two USB 3 ports in the front. A small port…
I made this while learning to use Shapr3d. I created it to specifically support the hub I ordered from Amazon. (non-affiliated link: https://www.amazon.com/dp/B08SM393WB) Sliced in Cura and printed in draft mode on Anycubic Kobra Max Used…
Awhile ago I purchased a 90-Degree USB-C adapter for my SteamDeck to make it easier to play while charging. Unfortunately it didn't really reduce the strain on the port as much as I would have liked so I made this little thing. The…
Simple and stable docking station. Compatible with Steamdeck, Nintendo Switch and all sorts of tablets. 3D PRINTING SETTINGS Printed sideways, 0.3 layer 10% infill, 2 perimeters. No spupports needed.
12/30/2022 - Initial posting This is an adapter to allow hanging the SteamDeck onto a gooseneck arm that can be typically attached to a bedframe, desk, etc. To use: Simply insert the SteamDeck into the adapter. Push the side clips into…
A belly stand for Valve's Steamdeck, with adjustable height and clamping mechanism. Assembly Note: For assembling the screws and attaching the screwhead, use tiny bits of filament as seen in the pictures. The screw design was based on…
I made this steam deck holder for a friend. I recommend lining the inside with felt or something. Trap on the back is design to hold the charging cable in place. Print on it's side with plenty of perimeters. Category: Video Games
I created a mount for the Dbrand Killswitch case and added a screw option to the lock to retain the lock instead of needing to use epoxy or gloop to connect the parts. The lock is 0.5mm Thicker than the Dbrand file because it had too much…
Gunther's modular dock but with more hexagons to make it cooler. SLICE: 2mm walls, lightning infill, 1.2mm top / bottom and 0.3mm layers or smaller. (no supports needed vent hole will bridge fine, see pics) PLA is fine to use.
I've had this hub for a while for office use but haven't had a use for it since I've upgraded to a new laptop. Rather than it go to waste, I figured why not use it with the Steamdeck, which only has a USB C port for expansion. Needed an…
A steamdeck mount / dock that is meant to fit under a desk or mantle. The hub mount is meant for a UGreen 5-1 hub . This particular model ignores the ethernet slot as I did not care to use it. The fusion360 files are attached if someone…
I created a mount for the Dbrand Killswitch case and added a screw option to the lock to retain the lock instead of needing to use epoxy or gloop to connect the parts. The lock is 0.5mm Thicker than the Dbrand file because it had too much…
Print all parts, supports for the base. I print with the killswitch adapater part down. Glue the “Killswitch Adapter” to the base Use screws to attach the base and top Items In Use dBrand Killswitch Case Nubia RedMagic USB-C Splitter M2*8…
This model is for two clips to be printed on both sides of the JSAUX HB0603 SteamDeck dock to increase the height of the Steamdeck. The existing design of the JSAUX HB0603(and earlier models) prevents airflow from about 25%-30% of the air…
i kept slipping my thumbs on the sticks so i designed something to help i printed mine in .10 with pla on a .4 nozzle fits really snugly on the sticks been using mine for about a week daily for an hour, love them
Remix of the Killswitch Universal Mount to enable the steamdeck to be held by a conventional tablet clamp mount. Contains only the plate part. Use the corresponding part from the original file for the steam deck side. Expected Size: 22.2…
This is a mod of dias low profile steamdeck stand (linked below) Its a nice stand with little nubs to locate in screw holes in the back of the console so its quite a nice positive hold. All I did was add a backplate and screw holes.
Made to fit this USB hub: https://www.aliexpress.com/item/1005008054068671.html?spm=a2g0o.order_list.order_list_main.41.7c091802AWyCrw You need a JSAUX modcase for this to work! Printed in ASA+, but PETG should work fine, maybe even PLA…
Switch style steamdeck dock. I like the dock that the Nintendo Switch comes with, so I designed something simmilar to it for the Valve Steamdeck. I velcroed a USB C dongle to the side of it. The design includes holes for cooling. The…
I don't have a Project Killswitch, but I do have a DeckMate! Follow the instructions for the original. If you don't want the backplate with the DeckMate connector, the original plate will do. You will also need to print the DeckMate…
I bought all magnets on aliexpress Magnets 6x3x3 ("Original") is specific but u can also buy it in amount of 4. Magnets 6x3x2
I created a lock for the deckmate adapter printed in PETG at 100%. Went traveling i wanted a way to secure the clip so I could stay attached on my backpack or on my bag. There are a thick and thin version depnding on aplication.
This is an inverted style dock for a Valve Steamdeck to quickly plug and unplug one handed. The inverted design eliminates the problem of plugging the USB-C cord into the top of the Steamdeck and makes it similar to a Nintendo Switch…
This thumbstick saver/protector holds the SteamDeck LCD thumbsticks in place while placed in a bag etc. It snaps on using 6x3mm magnets. It prints in place and has a hinge built in. All you need to do is add the magnets. I used superglue…
I liked the original model, but needed it to fit my monitor. Included the fusion 360 file where you can put your screen thickness in and generate the stand to fit. I've included the 17mm version which fits my screen. On my print I use 1mm…
Video of how it attaches: https://youtu.be/EpSo1UwkzSM Designed for use on Navel Ships with small bunks. It has a magnetic plate that sticks to the overhead of the bunk and lets you detach the rest when your not using it. lets you hang…
i don't even know how that would work, but i saw someone do it wrong so i had to do it right xD
This is a remix of https://www.printables.com/model/226307-steamdeck-hub-dock that has been modified to work when there is a DeckMate attached to the Steam Deck This dock is designed for Dockteck branded 7in1 USB-C hub with 4k 60hz hdmi…
This is the cover for the Steamdeck RedMagic Project Killswitch Backpack with a deckmate socket
This is based on the Gunther style dock with a modular slot on the back for different USBC hubs. I've made a module for my JESWO USBC Hub NC701. HERE:…
I originally printed in just PLA but I made a second version that has some TPU pads on the bottom and where the Steamdeck is held. link to USB-C hub…
A minimalistic iPad/Tablet/Laptop/SteamDeck holder/charging stand that can fit up to two devices. The holder can fit devices up to 35mm thick.
Remix of the model made by @zacques: https://www.printables.com/model/167650-steam-deck-clip-on-stand I didn't have M3 screws, so I've adapted it to use M2 * 5 mm screws. I'm just uploading the modified files, everything is printed as…
The very awesome design of the bracket that holds an oled screen https://www.printables.com/model/1278774-steam-deck-oled-screen-attachment doesn't work with my 14" monitor, and I wanted to try it. So here is an adapter that should fit…
Hello! Here's a way to add a TPU foot to this controller dock. While it is slightly more grippy than the hard plastic of the dock by itself, a dedicated silicone anti-slip pad will work A LOT better. This is just an option for people who…
This is a Dock for the SteamDeck I designed for using the following two USB-C-Hubs: https://de.ugreen.com/collections/usb-hubs/products/15214…
Printed using default prusa slicer settings on a MK3S with a 0.6 mm nozzle using organic support for the middle
Thanks for sneaky4oe's idea, I borrowed the concept and created a slightly different design. ========== WARNING! ========== DO NOT USE IF YOUR STEAMDECK DOES NOT HAVE GLASS SCREEN PROTECTOR INSTALLED! As this screen protector will be…
Mine was printed with 25% infill, taking about 200g of plastic and 8 hours. You can definitely use less infill, or more.
A wedge to give the Streamedeck Pedal a more comfortable angle. 20mm Lift 30mm Lift 40mm Lift
This is a stand for the SteamDeck, including charging for the Deck and RGB-Led lighting. The stand is only intended to charge and display the steam deck while not in use. While the deck is in the stand, it cannot be used! Print…
A full-sized docking station base made for use with modular accessories. This is 300mm wide for large printers. Most printers cannot print this, unless you divide the dock in prusa slicer. (I don't use it, don't know it) I've kept…
I had some rattling from the fan in my SteamDeck, and after opening it to clean the fan, my power button was ‘spotty’. As a temporary fix, I removed the button so I could hit the switch inside directly. A year or so later, I sat down to…
this is my first real design to make a “small” package of 2 devices, 1 is the xreal beam and the other is a USB C power and data splitter I attached an existing design from Jsaux mod case as an easy-to-attach mod. please feel welcome to…
Got the idea from another Anker dock and I had this hub laying around. I printed this with a 0.2mm layer height with no supports. https://www.amazon.com/Anker-Upgraded-Delivery-Pixelbook-A83460A2/dp/B07ZVKTP53
I had done it with the same instructions as the original. I'm not sure why, but the dragon didn't work right on mine, but we ended up using another dock in the end.
So there are 2 versions you can print whole or in parts. enjoy monitor I used below https://www.amazon.com/dp/B0C7KPPXTZ
Saw there was a ROG Ally version of the Joydock mount but nothing for the Steamdeck. Saw the Deckmate and the Mechanism system of mounting. Put them both together and you get a universal way to mount your Joydock! Very impressed with the…
Wallmount for OLED version of steamdeck
Docking Station to charge my steam deck and connect it to ethernet. Uses a cheap Lasuney usb-c hub I liberated from work. Slot for the dock is about 16mm by 56 by 120. Have cut outs for the vent, HDMI, USB-A, and Ethernet Ports. Design is…
I got annoyed at other steamdeck and phone stands so i just made one my self! Feel free to leave commends with pictures and rate if you like it Works for phone and amazon Kindle I later added rubber pads with super glue so it doesnt slip.
Your experience may vary: It looks like there's a chance of it snapping due to the hole being bigger than needed. I printed it again with PLA-CF (not pictured) and it's much much stronger now.
Allows you to mount a SteamDeck using a dbrand Killswitch case to the Universal tablet holder by @Bananenminister.
Overview I needed a specific bracket for my flipdeck project that is more finely adjustable, lower profile, and clips in the steamdeck: https://www.printables.com/model/1469356-flipdeck-the-multiboard-cyberdeck BOM This mount requires…
1st-sand 360's buttons diameter down to the size of your shells holes to confirm fitment. I used p120 grit 2nd- once fitment is smooth and not catching in the assembly set 360 button on the 3dprinted fitment and measure where you need to…
I designed this dock for two main goal: I would like to make the dock customisable for different USB-C hubs I want to experiment new idea of integrating magnets. So here is the dock. I separate the dock into two parts and upload the STEP…
Steam Deck Charger Cradle & Stand (EU Plug) A Steam Deck charger cradle with a built-in stand, made for the **EU power adapter**. It stores the charger and its USB-C cable, props the Deck up on your desk, and slides into the strap on the…
Made this in tinkercad to help carry the keyboard
Easy assembly cartoon animal car Articulated
Model was made for playing nintendo ds style games on steamdeck with additional LCD or playing game while watching stream/video/movie. The main idea was to have one USB-C for power and video, but i failed to source correct LCD and cables.…
(non-recomend) Spare part to replace a broken lid leg with a built-in stand.
Made a deckmate adapter for those dime-a-dozen generic silicone cases. There are 2 versions one is 90 rotated, because I had issues with disconnection on bumpier rides with a kickstand I recommend at least .2 layer height, no supports…
Very easy, stable and fast to print SteamDeck stand. Suits OLED and LCD version. You can put it in your case (behind this strip on the back of case) Print 2 times
Docking Station to charge my steam deck and connect it to ethernet. Uses a cheap Lasuney usb-c hub I liberated from work. Slot for the dock is about 16mm by 56 by 120. Have cut outs for the vent, HDMI, USB-A, and Ethernet Ports. Design is…
![Generic handheld stand [PSP, PSVITA, STEAMDECK, 3DS]](https://media.printables.com/media/prints/581583/images/4642614_437abe6c-c39c-4b2f-b2ba-bd2898c4f4e0/photo_2023-09-13_17-43-21-2.jpg)
![[On My Way] Pikachu Playing Steamdeck_Cartoon Animal Car](https://media.printables.com/media/prints/4562e47a-fb28-4de9-918d-9e9097ab7b03/images/11583169_35e3bc5b-deba-4161-893b-5bbfa7ebf5f0_0e362d47-15f7-4690-ad41-a9f43698cf57/img_0726.jpeg)
