Sterilite 54 Qt Gasket Box Clip
Use a screwdriver or something to bend the plastic of the box a bit so you can push the nonflat side nub of the model into the hole. Print it semi flat, as shown in the code file.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
137 models
Use a screwdriver or something to bend the plastic of the box a bit so you can push the nonflat side nub of the model into the hole. Print it semi flat, as shown in the code file.
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
The popular Ikea Samla bin was not easily available in my area, but it was easy to purchase a Sterilite 55L/58Qt plastic bin from a local Walmart. I used the original model from the enclosed link and remixed it to fit the Walmart…
These clips work great to keep the tops on the yellow HDX “Tough Totes”. I printed these so I can haul these totes in my truck bed without the lid blowing off. Excellent snap fit . The V2 fits better in the middle holes, the V3 fits…
Handle broke, I made a new one 100mm long Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Any PETG or ABS Any Category: Containers
I have the 54 and 32 quart Sterilite containers that I use as dry boxes and wanted clips for the ends. I noticed the gasket on the ends wasn't getting compressed much at all. These have helped quite a bit and can be used on the sides as a…
Compared to my first attempt, this is a much more user friendly filament dry box system using the Sterilite 20qt storage boxes. No more removing all the spools just to change out one. All parts print without supports in the orientation…
Drops into a Sterilite 6qt bin to divide the bottom in half if you need more granular storage. I printed with no top or bottom layers to get only infill which dramatically reduced the print time. Three versions available: sized to slice…
This is a replacement latch for a Sterilite Gasket Box. The ones I own are 54qt (51L), but from looking at pictures of other Sterilite gasket boxes, I think this latch is used on multiple models. It fits pretty tightly (tighter than the…
I broke a latch on one Sterilite 1495 (25qt) clear container and saw a chance to try out 3D scanning. This is the very rough result. Functional and printable, but not a very clean model. Latch should fit any containers in the 149x series.…
This baseplate brings the Sterilite 6qt 1642 container into the Gridfinity ecosystem, allowing a 3x6x15 volume of use. Need something bigger? Check out my 16qt 1644 version for a bigger version. As pictured, if using standard bins, a…
A new model of the Sterilite gasket box latch (2022). This version includes chamfered pin edges for easier assembly. Built in Fusion (file provided). Great fit and durability printed with PETG 0.4mm nozzle, 0.2mm layers. Print advice:…
The Sterilite 20L gasket containers I have are pretty warped at the lid. The amount of force this puts on the clips makes it very hard to unlatch them. This remix adds small wings so one can open the box much more easily.
Replacement handle for Sterilite 1215 2 bushel laundry basket. It may fit other Sterilite baskets with the same style handles. This replaces the entire handle so if the white bottom part is still intact, you'll have to trim that out. A…
Desiccant holder for Sterilite 20 Qt container. Fits along the side not taking up filament storage space. You should be able to find the Sterilite bins at Walmart, Target, Home depot or Amazon. There is an additional file for a funnel to…
This is my Frankenstein Drybox setup remixing from a few people. This is not pretty or perfect but it works and functions like I want it. I'm just sharing what functionally works for me. update: humidity in room 58% but in the passive…
Rail for sterilite 6 quart containers. 8 inches in length so it can print on most printers. Mount it to the top of a shelf or something to allow the containers to take up vertical space! Ideally print vertically. Unfortunately it makes…
Handles mysterious sometimes go missing on these sorts of bins. I made a printable replacement for the 149X series clear Sterilite bins. It requires two 6 mm M3 screws per handle to secure the pegs and enable printing with optimal…
Also check out my silica gel bead container that fits at the bottom of the sterilite containers, underneath the spools. This is my second remix of nikutama05's (on thingiverse) filament storage box that holds 4 spools of filament with…
I've printed this model both flat and vertically (supports in both cases, with a raft for the vertical print). A horizontal print will have the best strength for the pegs at the sides, while a vertical print will have a stronger…
Sterilite small 3 drawer organizer
Description These Corner Alignment Guides are designed to keep a Sterilite 58‑Qt bin lid more secure when used on the Snapmaker U1. This setup is meant to reduce overall noise while still allowing airflow around the machine. This design…
This is a remix of the Filament Spool Rack for 20qt Sterilite Container by leefla - Thingiverse which tweaked a couple of elements/dimensions from the original design. These rack ends are designed to work with 3/8" (9.5mm) diameter…
This simple mount holds an inexpensive rectangular digital hygrometer to the underside of a Sterilite container lid. These containers are commonly used (along with desiccant) for filament storage dry boxes. I keep a digital hygrometer…
This is a remix of 3dprose's hygrometer mount for Sterilite storage bins. The original model is designed to fit on a ridge on the underside of the lid. However I found that the fit was too loose for the 54qt and 80qt storage bins (maybe…
This is a remix of two different models. I wanted to be able to hang my hygrometer without putting any holes in the Sterilite box. I used the spacer_end model from the Modular Dry Box Dispenser, flipped it and connected it to the Drybox…
I love using the Sterilite totes with the gasket embedded into the lid to store filament. Combined with reusable desiccant, they work great at keeping filament dry. Unfortunately the latches are prone to breaking the pivot pins, rendering…
Custom inserts organize AA / AAA / 9V batteries in 6 Qt. / 5.7 L Sterilite bins (model 1751). Has cylinders on the bottom to slot into the sides of the bin. However the bins aren't perfectly parallel so it fits better the close to the…
I really liked this design so I moved a few things around for a snug fit with the watertight Sterilite 20 quart tubs. 5 spools fit tight. I did not use any spacers but might have to revisit that idea after I add passthroughs. I cut the 1"…
Redesigned @leefla's model https://www.thingiverse.com/thing:3069436 to be a little bit taller as the filament rolls were touching the desiccant in the container with the amount I had in them. I also made the holes slightly bigger so the…
Replacement latch for the Sterlite clip boxes with the clear lids and light blue latches. Printed in PLA with a .4mm nozzle, supports only under the two side bumps (painted support blocking in PrusaSlicer across rounded latch edge), and…
The original latches began to break one after another. Made them as close as possible to the original. I traced around the original latches and took measurements as best I could. I did this off of fusion 360 on my Prusa original mini.…
Filament Spool Holder Sterilite 20Qt - 3/4 inch PVC Minimalist remix of Stronger Filament Spool Holder for Sterilite 20Qt Box to allow use of ¾ inch PVC and printing on the A1 Mini or similar printers as the original design is too long.…
I use these Sterilite “Shoebox” containers for a multitude of things and I could not find a divider that fit my needs so I made one. Very simple print to use up those small ends of rolls. Each side uses about 35g of filament. Walmart…
Bottle separator grid for Sterilite 1422 Stack & Carry 2 Layer Handle Box. Each grid covers half of the box. Bottles are just under 30mm in diameter, typical of natural and artificial flavor extracts from various companies. Category: Tool…
These models are drawer organizers for the Sterilite 2073 Small 3 Drawer Unit ( Link ). This is a work in progress . I will be working on various divider orientations as needed for my use.
There is an improved remix here . This is a remix of nikutama05's (on thingiverse) filament storage box that holds 4 spools of filament with these changes: Designed for US-based 5/16 threaded rods. You need 2 of these that are each 12…
I found that davebpix's design was a little loose for the Sterilite box I was using. The foam was not compressed enough on the edges to create a better seal. Changes I've shortened the model 1mm at the opening for a tighter fit 0.4mm cut…
A grate for the Sterilite gasket box 20Q/19L. Two of these grates can be printed to allow for a raised surface for filament to be place upon. The raised surface allows for about 4 pounds of desiccant beads beneath it. This is a great way…
I bought two stacks of 3 drawers (https://www.amazon.com/Sterilite-20738006-Furniture-Storage-Multicolor/dp/B014E30YX6/) and wanted 3 stacks of 2 instead. Couldn't find just the lid anywhere, so I made this last night.
Spool Rack for a IP68 rated Sterilite 19 Qt (18L) gasket box. Compared to the 20Qt (19L) box, the 19Qt has is slightly smaller yet still accomodates four 1 Kg standard spools. The rack is positioned so the 200mm spools just fit under the…
Prints well in PETG, use supports as illustrated. I suggest adding enforcing volumes around the hinge pins to ensure 100% fill.
Replacement handle for a Sterilite under-bed storage container. Holds well and is stronger than original. Print with 100% infill. Recommend printing on end with supports for optimal stress orientation. See last picture for original part…
Model is offered as-is, in STEP format to allow for customization.
Want to dry a ton of filament on a budget with little to no hands-on time? Follow along to build your own DIY filament dry box. This thing is a clamp that secures the lid of a Sterilite bin (32 quarts) with a gasket to reduce the amount…
Designed this replacement since I accidentally bought a tote that was missing a handle. Didn't want to go back to the store and deal with an exchange, so I just designed and printed another! Fits all Sterilites totes this size (15qt/14L),…
Print Settings Printer brand: Bambulabs Printer: Bambu P1S Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 15 Filament brand: BambuLabs Filament material: PLA, PLA+, PETG Notes: YOU MAY need to use a raft to avoid lifting in a corner
Replacement latch for Sterilite Stack & Carry handle box organizer.
Had a box that was missing a latch so made one.
This is for storage using sterilite 20 quart gasketed containers you can find it in a bunch of stores. Hygrometer can be found here . The holder fits into notches at the top of the tub. Included on plate one is two bin clips, this is to…
I am a beginner at 3D modeling and have been using Shapr3D. I got so tired of these latches breaking all the time and so I did my best to recreate them. So far, this latch for my Sterilite 32 Qt. Gasket box fits very well. The red latch…
Longer version of the Sterilite Hygrometer Hanger by Crazy Man
For Christmas, I bought the Sterilite Ornament Organizing boxes but after getting home I realized one of the latches was missing. After a thorough search, I decided to pull out the laptop and make a new one. hopefully, this can help…
The bottom of shelf has only a small area of plastic to set upon which would make it hard to slide across a floor. The feet give it a lot more surface area. The caps prevent anything from falling or getting into the tubes. No special…
I love seeing how people use 3D printing to solve a problem! Add a MAKE if this works out for you! I've bought over 50 of these Sterilite 1642 containers (6qt Shoe box) for organizing all sorts of things. So, I thought I'd use a couple…
A clip for mounting a Sterilite bin under my desk.
I wanted to spread my silica gel desiccant beads evenly on the bottom of my dry box for maximum surface area, but hated crunching my filament spools directly into it and having little orange beads get pulled out from time to time. This is…
Simple drawer rails for Sterilite boxes with lids, made for Ikea Linnmon table and #8 x 1-5/8 generic wood screws You are going to need to have them tighter than you think, the lids are a lot wider than the lip of the boxes so you want to…
My first remix had individual rollers which worked well and enabled the use of any size spool, but in practice I found them frustrating to use and awkward to ensure they lined up with the spool. This update has two large rollers per…
Replacement latch, needed because some of the ones we'd bought were missing a latch. Printed at 0.2mm, 40% infill on its side with support material. Do not print long-ways unless you are printing in a material that you can refuse, as the…
This is the simplest and quickest to print dry box I can imagine. It holds 3 spools. You need only the following: Superglue Two prints of (SteriliteHolder.stl) One Sterilite 20Qt (19L) gasket box available everywhere! target , amazon,…
Sterilite 1871 Hinge Cap Replacement .2mm res, 10% infill, no supports, PLA
Dry Box using Sterilite container. Photos have build step descriptions. This is a remix of the spool holder and nut from PurchenZuPoden - “Universal Filament Spool Holder - Gen2” - Thank you for sharing your great work. Added files for…
This is a separator for the Sterilite 2051LAB8 plastic drawer. The drawer units have a capacity of 5.7 l. The drawer units are 32.7 cm deep x 22.5 cm in width x 15.24 cm in height. Support material is not required. An infill of 20% is…
Introduction Small bins to fit into a Sterilite 1422 and break up storage into a 4x8 grid with removable inserts. About This Design This is specifically for the 14 3/8" x 10 3/4" x 7 3/4" bin with inner dimensions around 325mm x 245mm x…
I like to use these 6qt bins for storage and organizing but sometimes they're too big. These interior bins don't use a lot of material and split the bin into 3 sections so you can keep smaller things without them all getting jumbled up.…
Additional clips for the side of the Sterilite 50 gallon bin. Some times when filled too full a little extra help is needed. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 12 Filament:…
a nice large dessicant tray that can be used in any larrge box. i specifically made the for the large 18" x 14" sterilite containers. works very well even with one but made to be a plate on the bottom if you print 4. .2 settings will…
This cradle fits into the Sterilite 20qt bin. It uses (3) .250" rods (approx 12" long) as cross pieces to support (4) 1kg rolls of filament (8" diameter). A foil mini loaf pan will fit under the spools to hold desiccant. Use the spacer…
These divider walls are to be used with the "Divider for Sterilite 6qt bin" file created by @cmh_13634. The dividers will help keep small items from spilling over into the other divider. It was created on Tinkercad.com. It was sliced on…
Wanted a bin to put atop of my mini Sterilte plastic drawers so I can throw junk on top without rolling off. I found this great model of the drawer top by @djcody (https://www.printables.com/model/713349-sterilite-mini-drawer-lid/files)…
Add reinforcement to the Sterilite 3 drawer system. The Single Track Rail required is 21" long for the 3 drawer system. Adds a solid top so the top portion doesn't sag under weight. Raw STL files provided so you can build/assemble printed…
Problem here is the product page 1995 – 66 Qt. Ultra™ Storage Box stock wheels included can be heavily loaded in shear & break easily stock wheels are plastic & are installed in a one-way fashion from the factory thanks to an “umbrella”…
Simple model, doesn't require supports. Depending on your bed type you may need a brim or a raft.
I purchased some very inexpensive humidity/temperature sensors from Amazon and wanted a way to mount them in my Sterilite 20qt Gasketed Storage Boxes for my filament. This is the solution I came up with. It's a snap-ring design that…
I recommend printing it up on its end so it sticks straight up. I didn't need a brim or anything and it came out perfect. Printing this way uses less material, needs less supports, and prints faster.
Tired of your BoxTurtle filaments sitting out in the open? I designed this simple adapter to give mine a proper home inside a Sterilite tote. It's a cheap, easy upgrade that keeps humidity away from your spools. What It Is This is an…
Rails to hang Sterilite baskets under my cupboards and shelves. Comes in 3 height options. Category: Kitchen & Dining
I designed this replacement part for the latch on Sterilite TouchTop garbage cans to be as faithful to the original as I was able to, both mechanically and aesthetically. See photos, which show the printed part next to the original, for…
I store my filament in Sterilite 19324306 20-Quart Gasket Boxes with Blue Aquarium Latches. I use loose bead desiccant, so I wanted a tray to keep the spools out of the beads. Additionally, it helps prevent the beads from sliding around…
A handle designed to fit in the hand-hold on a Sterilite 1842 footlocker (https://www.sterilite.com/product-page.html?product=18429001&mid=224) to allow it to be pulled on its wheels more comfortably. Makes it much easier to wheel the…
Make your filament storage smarter by being able to remotely monitor the humidity inside each container with the help of cheap Zigbee hygrometers . These have a display built in, which is why I modified the original design to fit these…
My Sterilite Step-on WasteBasket Pedal broke a while ago, so i challenged myself to design a replacement part Features Printable on a Prusa Mini Print Instructions Nozzle diameter : 0.40mm Filament : PLA (for rigidity) Perimeters : 3…
This has an overhang that's a bit easier to print, 40° instead of 16°, and won't normally require support (although they're still needed for the pins). The tradeoff is reduced opening angle which leaves the latch more prone to damage when…
This model is designed to fit one half the width of a sterilite drawer. It holds 20 batteries.
Small mounts designed for the Sterilite 20 Qt sealed storage bin. They print fast and use a 3/8" aluminum rod to connect the two mounts. One 3' x 3/8" aluminum rod is enough for a complete rack. I printed them in PLA + and I'm sure PETG…
If you have a Snapmaker U1 and you use a 66Qt Walmart Sterilite box as a top cover this buildplate holder is for you - especially if you alternate between 2-3 buildplates. Remixed from @Cyberdyne_403773 's version - check out their top…
I created this model to keep two stacked Sterilite drawer units aligned in our bathroom. The recessed area is the top and fits snuggly on the bottom of the upper unit. The bottom guard then fits around the outside of the bottom unit. A…
218mm wide, should print fine on an ender 3 or clone.
I designed a hook to attach to a set of rolling Sterilite drawers. The distance between the two mounting hooks is 99mm. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
I needed a model of this Sterilite 54QT Seal Bin for a project I was working on to build a large 3D printer support dissolving tank. Pretty close representation.
I started by designing the drawer to fit the Sterilite system. I then decided to make the cabinet to make my own units as this style is no longer made. The full units will stack with each other but were not designed to stack with the…
This model is designed to fit along half the width of a sterilite drawer. The model holds 28 aaa batteries.
I tried using pete.d's model but found the tabs on his were on the wrong side for my can. They graciously added their step file so I could make this remix. Check your lid and make sure the cut outs for the retaining tabs are facing the…
My daughter moved back into school and needed some additional storage space under her lofted dorm room bed. These 3 drawer containers (…
Replacement handle for Sterilite Stack & Carry handle box organizer.
Printed with petg at .25mm layer height. Print the adapters and install on the drawer unit. Proceed to put your new top on and trace outline. Remove adapters from drawers and mark screw holes. Assemble. A quick look…
This is an all new model, inspired by the design by RealityTake2 . My model can be attached to the container lid either using small zip-ties or for a more finished look with 8 to 12 mm long M4 screws.The lip that the mount attaches to are…
For some reasion the button stopped holding it closed, to this clip snugly snaps on to hold the lid. I print mine in silver PLA, on it's side. For a 13 Gallon/49L model 1045 trash can (Base K)
Added a hole for the commonly available circular hygrometers everyone has