OTF Fidget Knife Blade with stronger clips
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
- Downloads
- 5,547
- Likes
- 555
- Rating
- 4.76
606 models
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
The original spool required you to glue together the 2 halves which left a weak joint. I created a threaded joint where both pieces print flat with no supports. They screw together and work just like the original but much stronger. Print…
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
This large, bright red heart-loving tow hitch cover is sure to bring a smile to anyone laying eyes on it! Help spread the LOVE ! Easily customize the tow hitch to your liking by loading the tow_hitch_heart.3mf file and replacing the heart…
Printed with PLA at 150% scale. There are three points that are different than original: Printable handle without supports Stronger connection between head and handle Smoother scoop head for better printing
Proudly presented by Zero Effort Studios™ – the global market leader in things nobody asked for, designed in five minutes and regretted forever. Why did humanity split the atom? Why did we land on the moon? Why do we keep inventing smart…
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
The other dummy 13 posable hands and fingers didn't work well at 200 percent scale, the fingers were too spaced out, and you couldn't reliably print them with a .4mm nozzle. I used an older model as a guide but I designed these fingers…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
Stronger Parametric Bag Clips - PLA compatible Remix of my tried and trusted Bag Clip - PLA compatible: https://www.printables.com/de/model/53277-bag-clip Use OpenSCAD customizer to make a Bag Clip in any size you want. Or print really…
PLA works ok. PETG will be better. 100% infil will give you the best strength.
If you are here, you know what this is for! Its stable, allows the use of magnets and does not Waste Filemant. I Printed it with 2 walls, 3/4 top/bottom and 25% infill in PLA+ Ps: i mounted the honeycomb wall 90° rotated, so there is also…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
wanted it slightly thicker Category: DIY
This is my improved version of the Articulated mouse. This version doesn't break easily in the middle when handled by my cats. Printing recommendation: Infil: 0% perimeters: 3 layer height: 0.2 mm filament: PLA (It is said that PLA and…
I enjoy printing chip clips and I'm always on the lookout for good ones. This one is very fun and relies on compliant mechanisms to work. I noticed that the original ABS version wasn't quite strong enough for thicker items to clamp on…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was originally looking for a key ring that was 1) easy to use 2) easy to print…
Changed print orientation to make part a lot stronger. No support, quick print
READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…
Print in PLA with 5 walls; yields very strong part with little to no flex. For me, the OG version would either delaminate or just break during unwinding.
I found that the original version was a bit weak specifically on the bottom of the container and top of the lid. This version has been made a bit stronger so it can be thrown into a container with heavy objects without breaking. Only the…
I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…
A remix of https://www.thingiverse.com/thing:2835053. The original links would break from time to time while taking the print off the bed. The links where updated to be larger and stronger.
During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger. This design is based on R1 prusa part. Print instructions I have printed it with…
I reinforced the standard holder because it was too weak.
I liked the spray trigger gun, but noticed the author mentioned about how strong the trigger was due to splitting at the layer lines, and he referenced people stating it was failing due to this. I think it's cool it was print in place,…
Print without supports After printing you have to break-loose the hinge. Optionally you can add a softer material (electrical tape/heat shrink) to the arm and body.
The original screws were printed vertically. After using the original screws for a few months, it started to split at the layer lines, so I decided to make these screws, that you can print horizontally on the bed, which also gave it an…
Print with ABS, ASA or PA-CF (or any other high-temperature filament) with 100% infill. No Support needed V2 added, more stable and easy to print
Since the ramp broke off after a couple of months of heavy usage, I created a version with a stronger hinge. Maybe someone finds it useful. Category: Toys & Games
Minor variation to make this stronger than original.
Pretty much the same as: https://www.printables.com/model/67857-fast-print-in-spool-desiccant-silica-gel-container But increased the overlap to make the wall stronger without impacting print time. You can see this in the 4th picture that…
[EN] This is a reinforced version of my modular hinge. I needed a more rigid hinge for my purpose. The FreeCAD file is included as usual. Details for assembly look here: https://www.prusaprinters.org/prints/58767-modular-hinge [DE] Das…
The O in ERROR was slightly higher than the rest and I didn't like the Base. I would suggest printing it face down.
I have slightly modified the bottom plate of Mikolas' awesome media control knob. It is now slightly thicker, fits more tightly and reduces the flex of the pins holding it to the body. I like it how the entire button feels much more…
Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…
This charming keepsake container is designed to safeguard your little one’s baby teeth. It features twenty individual sections, each providing a safe haven for a single tooth. Crafted for convenience, this model prints seamlessly in one…
I reinforced the standard holder because it was often too weak. It has stronger sides for holding the heater block and more material in certain areas. It fits the MK4S printer with a silicone sock installed and E3D nozzle I recommend…
Remix of Hand Push/pump drill with stronger replaceable jaws, the lower part was too weak new one is stronger
Organizador de zapatos super sencillo pero reforzado para que no doble cuando pongas un calzado más pesado Lo puedes imprimir tumbado en una Ender 3 y sin soportes Válido para tallas de pie de hasta un 45 (que es lo que calzo y lo máximo…
This remix is a stronger version Thanks to Adam for the original model https://www.printables.com/model/213603-pressure-relief-valve-for-cyclone-dust-extractor-p
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
Removed the holes so it's stronger. Otherwise, it's the same.
@JohnWayne_287636 made a beautiful design. I just made it sturdier.
A remix of a wonderful model.
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
I am huge fan of Formula 1 and cars, so I decided to add my model "Formula Tyrell P34 1976 Kid Toy (stronger with function wheels, 1:24)" to the ongoing Toy Cars Prusa Contest. I took and remodeled two original models by rkxone and…
Original model was working wonderfully, but just on almost empty (light) spools. Reason was I used ASA as material, which is much softer than PLA, under the weight of the full spool the axle deformed a bit, and instead of resting on the…
Because I wanted to be about to chain the arm segments together via 2 arms > 1 arm > 2 arms > etc. I created a threadless arm to let the bolts pass through and let me chain these infinitely without ending up with some joints having two…
Update 1: Extra Thicc - Added a thicker version for use with 1 inch diameter wood dowels. There are a thousand spool rack prints out there, but most seemed too flimsy or focused on aesthetics rather than function for my taste. So I made…
Gridfinity Vase Mode Bin with stronger edges, with reinforcing ribs. I also have magnets slot version. I would suggest using PETG material (it is less brittle) but I think PLA should be okey. Print settings: nozzle: only use 0,4mm layer…
The original OG Star Tracker v2 is a very interesting project. But, unfortunatelly some of the parts are a little weak to be 3D printed especially with normal materials like PLA+ or PETG (I don't think the oringally recommended ABS/ASA…
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
Remix of rugged box from Whity remixed for stronger box and tighter seal
This model is a remix of the sanding block proposed by micmac2a and Joew1120: https://www.thingiverse.com/thing:4639552 https://www.thingiverse.com/thing:4793489 In this version the printed screw has been modified to support more torque…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
Added some extra material to the connection to make the swatter stronger.
remixed for a tougher hold.
Ideally print in PETG rather than PLA for more elasticity, tree supports suggested.
Just a little beefed up spring for the disc shooter. I only made the part where the arms are attached to the base slightly wider. Gives some extra meters. Long time testing still under progress ;-) Safety disclaimer: Don't aim at people…
When I tried printing the original ball and socket links, the socket pieces would snap off when assembled. So I made this stronger version which prints on its side. The friction fit is nice and tight. I did have one piece split lengthwise…
Thank you so much to inlinerbutch who made the inital stand that I remixed from! This is a fantastic stand that folds up nicely to pack up my G90 . Unfortunately there were some sharp right angle corners on the stand that happened to snap…
88x88 mm Shelf: Needed a larger shelf to hold a few photography light modifiers. Made this thicker, larger, and stronger then the original shelves.
~~Great original model - but I found: It was quite easy to break. It was slightly shorter than I'd like - it was almost level with the probe when deployed which caused my bed to crash into the nozzle. The 3d mesh was a bit borked - it had…
The design by MishaT is amazing, fascinating and intriguing but it didn't take long for the pins to snap on two of the prints which I had made of this thing despite me printing out the latest version of the connecting bar, V2. Thinking…
The original bracket was prone to breaking and sagging. I was chasing my Z baby steps for a long time. Not anymore! Print with the 2 hole side on the build plate.
Stronger Version of the Cloud Shelves I've seen on here… Can be printed in PLA and not bend under the immense pressure of all you Butt Wipe! Mines been up for a year and still holding the Poopy Paper High! Happy Printing!
attach the grills to the base and if needed drill holes to insert brass nuts or screw directly in the base. User materials Base black petg 30% infill Grill grey PLA 100% infill Brass insert nut M2x4x3.5 (4x) M2 screw M2x5
This paracord tensioner is designed to provide enhanced strength, making it an ideal choice for a variety of applications where durability is key. Whether you're setting up a tent, creating outdoor gear, or working on any project that…
CLICKBase was the best Gridfinity base… till now. DON'T PRINT WITH PLA, USE PETG! or any filament with less creep. Use ARACHNE! This model makes use of thin walls for support structure and is optimized for a 0.4 nozzle. ( CLASSIC should…
Larger. Stronger. Easier to get stuff out of
This is a remix to attach a neck strap to the Dji RC-N1/N2/N3 controllers both for safety, to prevent drops, and stability to make flying a bit easier if you're used to hanging your rc controllers off your neck. Changes from original: I…
NOTE (UPDATED VERSION): When I was cleaning the Fusion's file from redundant sketches I accidentally lost a couple smaller holes that allow M3's thread to bind, so some people could have had problem with screws staying in place. I re-did…
Remix with thicker 2mm wall for PETG printing and inner fillets to make it stronger. 150mm inner diameter Use the STEP file for printing, the STL is only for 3D preview and have not the best export quality. For the best quality, ensure…
I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . Many designers use CAD programs suitable for mechanical design that have problems opening and…
Prusa's original y-rod-holder has a very thin section above the y-rod, which is prone to breaking if over-tightened. Furthermore, if printed in ABS, the top may show unsightly stress marks after tightening, even if it is not…
Print with 0.2 mm max. layer height with PLA Print with 0.15 mm max. layer height with PETG (less Stringing and “Blobs”)
The original body.stl file has a pretty weak tail, which is easy to break. I just imported the body file into blender and thicked the weak point a bit. To print, just use this body file instead the original and it schould work fine.…
When I tried to print the original file, it kept breaking. So, this is an edited version with reinforcements
Added 3mm extra material make spring stronger. Works very well with PETG and shoots significantly longer.
Custom designed Suckit dust shoe (dust boot) arm(s), specifically for the Onefinity CNC, but should work for other manufacturers. This arm has been made stronger to support the larger model of dust shoe that uses a 4" hose found here:…
Strongly recommended to print in PETG
In original rack I had issues with breaking teeth on rack even with PA12 filament when push rack into “charged” position too quickly. So in this rack teeth will not snap easily, but you should be sure in first layer geometry and adhesion.
I was having some issues printing the chin of the original model which printed without a connection to the chest and had a few prints fail because the bottom of the face fell off (even with supports). So decided to connected the chin to…
I love this yarn spinner design but found that the spindle peg was a weak point - over time it would weaken and snap in half on me at the junction between the spindle and the base. I think it'll be much stronger if it's printed lengthwise…
I wanted to print this model for a friend that loves cute T-Rexes, but wanted both to make it durable and to fit a chain link without having a visible loop. Hope this will be useful to someone else, enjoy!
My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…
The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be very strong and then dangerous. I created a hub part that has sparts printed at a better orientation strenghtwise. This…
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
This is a 50% version of the low-poly Pikachu remastered, by @AgustinFlowalistikAr The original model has a weakness at the base of the tail, that made it prone to break if used a little too much. Furthermore, the original model is kinda…
Thanks grosiln for the idea and Stanley for the stronger mod. Printed with PETG and 02.mm layer height and works fine.
created with PLA, can be printed in TPU(recommended). The print in place version only needs supports on the outer rim, everything else doesn't need supports. If a problem comes up, please comment and make that problem known so that I can…
My first fan broke when the fan was dropped due to layers being parallel to the fan blades. This gear allows for the layers to be perpendicular along the shaft making it a lot stronger. The pin has enough space to push in with relative…
The tracks did not keep together as the train traveled on top of them. I noticed (and tested) that https://www.printables.com/model/889614-lego-flexible-train-track-rail have a very strong locking design, so I use them to modify the…
From : https://www.thingiverse.com/thing:1680619 "I have been carrying character and team tokens around to hand out and I kept breaking the pika tails off in my pocket. I found this strengthened version but it is still only stronger below…
Fender support part for Kukirin G2 Pro. Printed it with Bambu Lab PETG-CF. Slicer settings: 0.2mm layers; 4 perimeters; infill 40% gyroid; laying down on the broadest side; supports needed.