442 models
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Print approx. €10.96–€13.40 excl. taxPreliminary estimate for one variant
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to use this holder mounted to the wall of a cubicle overhead storage bin. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 80 in C-clamp area, 15 elsewhere. 80% for screw. Supports: Yes, for threaded hole…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes 50mm OD when printed 1:1 scale, this way you can form large dodecahedron lettice molecule-like structure for kids and silly grownups. it is easily scaled…
Print approx. €5.33–€6.51 excl. taxPreliminary estimate for one variant
3D model of the 4v60 x-ray file from PDB
Print approx. €41.63–€50.88 excl. taxPreliminary estimate for PETGSource material: PET
EN: Long in my head, now finally realized. Holders for the honeycomb-structure-remix , or the grid and the holder . The hexagons are intentionally relatively precise so that the “buttons” adhere well to the honeycomb structure. This might…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
3D model of the 1FNT x-ray file from PDB
Print approx. €15.35–€18.76 excl. taxPreliminary estimate for PETGSource material: PET
2x2x2 unit cells of a diamond crystal structure with impurities Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for…
Print approx. €9.14–€11.18 excl. taxPreliminary estimate for one variant
Rather poorly implemented design by me but hopefully someone else can help make it better!
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
T4 lysozyme is an enzyme that helps break down bacterial cell walls — a classic protein used to teach how structure relates to function. This model is designed for teaching protein tertiary structure, showing how different…
Print approx. €44.10–€53.91 excl. taxPreliminary estimate for one variant
I created a key fob for my OER discrete math text, Applied Discrete Structures. The 3D text was created with an Oculus VR headset and the Gravity Sketch app. The logo was created with Mathematica.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
Lampshade with voronoi structure Compatible with Amazon pendant light kit Print information Size 180(X)x180(Y)x120(Z) Can be printed without support. Print in PLA with low print temperature and sufficient cooling to print the voronoi cell…
Honeycomb structure as decoration or some sort of coaster or an underlay for lasering.
Satisfyingly slow flowing Marble Run to use with tree support only. Steel ball used: 8mm See Video for more details: https://www.youtube.com/watch?v=-zLj6\_tX5aY…
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
A little side project. These blocks are best painted dirty and rusty. Stack them high, point the pipes here and there. Mirror and scale. I have some thoughts to make more in this style, would you like me to?…
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Have you noticed, that the printer is not working as expected? You can move the printhead without homing and it might crash somewhere. you can also move the base and its crashing if you reach the top. The reason is a not well programmed…
Three of the most basic forms that crystal structures form in materials. Supports are necessary. Models in the image were printed at 50% scale. Print instructions 0.2mm layer height 15% infill Supports Necessary
9/5/25 Update: All changes are in bold italics. Includes instructions for simpler way to adjust the height of the file and a warning that the base file might not be the exact right height for your machine. Unfortunately, I unintentionally…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
tow behind tractor with forage superstructure created according to the original behind tractors created by @MrHanjak, the corresponding scale of the model is 350%
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Prototype of Auxetic metamaterial which I made to demonstrate how auxetic metamaterials work. The rectangle sample works well, but the star sample needs to be printed from flexible material. Auxetic material If you pull on the auxetic…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
vlek 9t s nástavbou na klády - For size to models of MrHanjak tractors use 350%
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
Very minor fix to "Viking Warrior by LSMiniatures" For No support 3D printing. I highly appreciates his great 3D modeling work!! TKS! Category: People
Tensegrity structure. https://youtu.be/Lo\_Qxrsz824 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4x0.2mm Filament: Prusa PETG Galaxy Black Category: Physics & Astronomy
Aquarium (Fishtank) – Basalt Structures Hey maker! 👋 One of my older designs – basalt structures for large aquariums. Please forgive any small imperfections, I was just starting back then. 😄 Features: Hollow elements that can be glued…
The structural end detail contains a fuel tank, two radiators, flooring and various support columns. The parts list is for one end structure, two are required. Note: The FuelTankDecals and HazardDecals files can be printed on a vinyl…
This is the center structure details of the Apollo Crawler. Note that the two sides are not identical. One of the sides has a control room and the other side has radiator vents. Note that the Side 2 Skin is the same for Side 4 as well.…
vlek 9t s nástavbou na kulaté balíky s balíky. For size to models of MrHanjak tractors use 350%
Only works: With DRY (!) TPU95 - only TPU 95! With the provided print settings In 90% of cases (not all TPU 95A filaments are the same) Print settings: Wall Generator: Arachne Layer height: 0.192mm (leads to 2.3mm total height, which is…
A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!
This model consists of the Level 0-30 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
These accessories are tailored for an Ethernet switch resting on the shelf bracket I designed https://www.printables.com/model/302365-leviton-structured-media-extended-shelf-and-bracke The retainer holds the top of the switch in place.…
(Updated 2025 Version) English: This is a stylized 3D printable representation of the THC molecule (Δ9-Tetrahydrocannabinol), the active compound in cannabis. Designed as a framed wall art piece, it includes labeled atoms and a…
Create a structure for your climbing plants against a wall, a harness for your plant pot, or perhaps an art piece! Made for 4mm (5/32") wide rope 550 Paracord Connect the top and bottom part with two M3 screw 6 to 12mm long for each cross…
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
This model consists of the Level 30-60 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
Structure of the Earth I present you an educational 3D model of planet Earth, showcasing its fascinating internal structure. This model is designed to provide a unique view into the Earth's interior, allowing for a detailed study of its…
This model was created because my advisor needed a teaching aid for undergraduate students in a Materials Science course. However, the 3D printer in our department often has problems and freezes mid-print when trying to print these…
Lattice cube generated with a truncated cubic pattern. Category: Engineering
This model consists of the mid-level structure for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
The ones you can purchase are cheap and work well, but in a pinch why not just print a few? I used PETG for it's flexibility and printed at a 45º angle to not have weakness at the layer lines. Two of the files are straight up and two are…
Assembly instructions: https://eiffeltower.nenoff.com/ Stability test video: https://www.youtube.com/watch?v=wlf7PaVMOOA Please share your build! I am fascinated by the tensegrity (tension & integrity) buildings and structures. They look…
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The idea of this model was to reduce the amount of material to a minimum. Tower height 140mm and 24 gramm of filament. Easy to print. No support structure needed. Sand clock design.
Organic Chemistry Stencil – Precision and Clarity in Every Structure Dimensions: 120mm x 80mm Designed for students, educators, and professionals, this Organic Chemistry Stencil is the ultimate tool for creating accurate and neat chemical…
Explore a collection of auxetic structures, featuring both chiral and anti-chiral designs, optimized for 3D printing. These designs exhibit negative Poisson’s ratio behavior, meaning they expand laterally when stretched and contract when…
(Updated 2025 Version) English: This 3D printable artwork features the chemical structure of LSD (Lysergic acid diethylamide), one of the most well-known psychedelics. The design shows labeled atoms within a precise molecular layout and a…
I very much like the structures Imperial Terrain has put out in anticipation of SW:Legion, I wanted to make a free simple Tattooine structure. I just aped common Tattooine architecture, those guys are pretty simple, then added some vent…
EN: This is an ongoing project I'm working on, a Humanoid Robot, for my youtube channel, all the videos talking about it are in portuguese for now as I've not had the time to translate them to english yet, so if you want to follow it,…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
3D model of the layers of a leaf, including the cuticle layer, upper epidermis, palisade layer, spongy layer, lower epidermis, and stomata. It is part of a project for my daughter's biology class. It is somewhat complex to print and the…
Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.
These are the base units of the Weaire-Phelan structure, as well as its periodic unit. The periodic units can be assembled into a 3d array without rotations. In two dimensions, the subdivision of the plane into cells of equal area with…
So 3D Printy suggested somebody try to recreate an experiment he was reading about and wanted to see it printed on a MK4. I went to work and this was the result. Both STLs for printing and SVG files for cutting available. Print .2mm…
A mounting bracket for a SiliconDust HDHomerun Duo tuner for Leviton structured media panels . I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. The tuner drops in through the top of the…
I had multiple PSUs sitting on my desk and on the ground, so I designed this structure to store them under the desk. It was the largest size I could print on my Ender 3 S1 Pro. I've printed 2 (two) of them and each one stores 2 (two)…
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 1 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
150mm X 150mm X 260mm I printed this in two separate prints on the Bambu Lab P1S with a 0.4mm nozzle, Bambu Lab PLA Basic Black and Bambu Lab PLA Matte Grey and supports on.
A model designed for extreme testing in vase mode. This tall, thin structure on a stable three-layer base pushes the limits of print precision and stability with minimal material usage. Perfect for height and thin-wall calibration tests.…
A large kelvin structure matrix to print as a demonstration. It is possible, when using extreme pla from 3dmax, to support a 300lb person standing on this thin matrix, the inherent strength of the design is such. Category: Biology
Auxetic materials expand as they are stretched. This re-entrant structure uses a bow-tie unit cell that is placed in a pattern. As for auxetic structures this is a simple one. If you want to see the full 3D simulation (interactive viewer,…
This is a custom bracket for mounting equipment in a Structured Media Enclosure (SME). The SMEs found in most residential homes are designed around Leviton components which are ridiculously over priced. The Leviton pushlock pins are…
UniFi Express mount for a Leviton Structured Media Cabinet . The holes are 5 inches on center. UniFi Express can be inserted right side up or upside down to best fit your application. The opening on the bottom is large enough for the…
a model of diamond cubic crystal structure because the vertical rod is hard to print on an FDM printer so I made a separate version.
I found this model which looked really cool but didn't have a good base. I remade it from scratch in Fusion 360 (F3D file included) to include a base and also have smaller holes sized for monofilament fishing line. Assembly involves…
Turn-Table Any self-respecting railroad needs a turntable for obvious reasons. This turntable can be used as a center of a roundhouse (more about this later) or as a center switch for multiple track paths. The basement layout used the…
New version V2 (Reduces filament usage and printing time in half. It also works with 4 sticks instead of 3, making it more resistant.): https://www.printables.com/model/577962-plant-climber-structure-for-tomatoes-beans-and-cli In Spain,…
This model allows for the horizontal or vertical mounting of the Ubiquiti USW Flex Mini network switch in a Leviton Structured Media enclosure. In the horizontal orientation, the switch can be inserted ports up or ports down without…
Note: This model was imported from Thingiverse where it originally used the “Customizer” add in. Fear not, it can still be customized by downloading the .scad code and open it using OpenScad! ------- Hats off to AndreasBastian's…
Scapegrid is a modular 3D structural grid designed to help aquascapers create stable, customizable terrain within their aquariums. Ideal for building elevation and topographic features, it serves as a lightweight formwork that is both…
The Mesh Bowl combines a smooth, rounded interior with a precisely patterned outer surface inspired by a fine mesh structure. This contrast gives the bowl a technical yet elegant character, adding depth without appearing busy. Ideal for…
The design concept is pretty simple and straight forward. It consists of the following piece types and quantities: x2 compression pieces. x2 base. For a complete set, you will need to print all 4 pieces , have a string or a ball chain…
Printing it's best printed on one of its faces, using a brim Remixing attached is the fusion 360 file if you want to play even further with it
It's supposed to be a printable version of the thing in Steve Mould's video: Self-assembling material pops into 3D The paper by Tian Chen and colleagues is: Bistable auxetic surface structures, ACM Transactions on Graphics (TOG), 40(4),…
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
Elements prepared for 3D printing from resin. Fasteners must be glued together to create an extensive, spectacular surface structure. In another of my projects you can download the individual elements and build the surfaces on your…
All recommended settings set in 3mf project file. Will print at 225C. Flow rate (mm³/s): 10 to 21. I'm running Klipper firmware. My Sovol3d related repositories: OSS Klipper Configuration Everything Sovol SV06 Buy me a Ko-fi to support my…
Ich habe den Würfel mit einer 0.40 mm Nozzle mit 10% infill und ohne Stützstruktur für die Löcher(da sie rund sind benötigt man keine) gedruckt. Er benötigt ca. 20 Minuten zu drucken.
A tensegrity is a stable configuration of bars and cables. The bars don't touch each other and are only connected via the cables. If the cables are very thin compared to the bars, the bars seem to float in mid-air. The position and length…
Based on orbital structure lightshade by Kagarov. Modified it to be supported from the bottom and function as a self-standing fully 3d printed lamp. Must be printed on 3 parts, shade, support, and base. The connector threads into the lamp…
it is not a fast print design & it is not heavy-duty. some 3mm port added on arch structure for your use MSC01 is optional but highly recommend put it for stability and easy moving. MSC05 for 6 arch set MSC06 for 3 arch set
Tool to check real printed hole dimensions
This is a 3D printable aircraft wing rib frame, designed to provide structural support and shape to an aircraft wing.
Estructura de dron fabricada en impresión 3D, con filamento flexible TPU gracias a este material se obtiene alta resistencia al impacto ya que al recibir un golpe la estructura no se romperá. Características: Dron compatible con hélices…
